Study guide
10.3 Lateral Load Behavior of Deep Foundations
PE Civil Geotechnical Study Guide Exam
Track your progress as you read
Finished sections get a check mark.
1 Chapter 1: Site Characterization
1.1 Site Data Interpretation & Boring Plans 1.2 In Situ Testing & Field Exploration 1.3 Soil and Rock Classification Systems 1.4 Groundwater Characterization & Hydrogeology
2 Chapter 2: Soil Mechanics, Laboratory Testing, and Analysis
2.1 Weight-Volume Phase Relationships & Index Properties 2.2 Effective Stress & Pore Water Pressure Dynamics 2.3 Shear Strength Principles & Laboratory Testing 2.4 Permeability, Hydraulic Conductivity & Seepage Properties 2.5 Consolidation & Compressibility Analysis
3 Chapter 3: Construction Observation, Monitoring, QA/QC, and Safety
3.1 Earthwork Quality Control & Compaction Verification 3.2 Geotechnical Instrumentation & Field Monitoring 3.3 Trenching, Excavation Safety & OSHA Shoring Requirements 3.4 Erosion, Scour Protection & Slope Protection During Construction
4 Chapter 4: Earthquake Engineering and Dynamic Loads
4.1 Seismic Site Characterization & Ground Motion Hazards 4.2 Soil Liquefaction Triggering & Post-Liquefaction Assessment 4.3 Dynamic Soil Properties & Ground Response Analysis 4.4 Pseudostatic Analysis & Seismic Geotechnical Design
5 Chapter 5: Earth Structures, Ground Improvement, and Pavement
5.1 Slope Stability Analysis & Limit Equilibrium Methods 5.2 Embankments, Earth Dams & Levee Geotechnics 5.3 Ground Improvement Techniques & Design 5.4 Geosynthetics in Geotechnical Engineering 5.5 Flexible & Rigid Pavement Subgrades & Buried Utilities 5.6 Landfills, Caps & Containment Systems
6 Chapter 6: Groundwater and Seepage
6.1 Dewatering System Design & Well Drawdown 6.2 Flow Nets & Two-Dimensional Seepage Analysis 6.3 Uplift Pressure, Piping & Heave Safety 6.4 Subsurface Drainage Systems & Filter Criteria
7 Chapter 7: Problematic Soil and Rock Conditions
7.1 Expansive & Collapsible Soil Engineering 7.2 Organic Soils, Sensitive Clays & Soft Marine Deposits 7.3 Corrosive, Frost-Susceptible & Degradable Formations 7.4 Karst Topography, Rock Slopes & Rockfall Hazards
8 Chapter 8: Retaining Structures
8.1 Lateral Earth Pressure Theories 8.2 Rigid Retaining Wall Design 8.3 Flexible Retaining Walls & Sheet Pile Bulkheads 8.4 Temporary Support of Excavations 8.5 Mechanically Stabilized Earth (MSE) Walls & Soil Nail Structures 8.6 Cofferdams, Underpinning & Adjacent Infrastructure Effects
9 Chapter 9: Shallow Foundations
9.1 Ultimate & Allowable Bearing Capacity Theories 9.2 Effective Footing Area, Eccentricity & Combined Footings 9.3 Induced Stress Distribution & Immediate Elastic Settlement 9.4 Consolidation Settlement & Mat/Raft Foundation Design
10 Chapter 10: Deep Foundations
10.1 Driven Pile Axial Capacity & Settlement 10.2 Drilled Shaft Axial Design & Construction Methods 10.3 Lateral Load Behavior of Deep Foundations 10.4 Pile Group Dynamics, Efficiency & Downdrag 10.5 Dynamic Load Testing & Pile Integrity Evaluation
10.3 Lateral Load Behavior of Deep Foundations
Key Takeaways Explain This Topic AI
Lateral pile response is dictated by pile flexural rigidity (EI), soil stiffness, pile head boundary conditions (free-head vs fixed-head), and relative stiffness length parameters (T or Le).
A pile behaves as structurally long (flexible) when embedded length L >= 4T (in sand with linearly increasing subgrade modulus) or L >= 3.5Le (in clay with constant modulus).
Broms' ultimate lateral capacity method assumes simplified soil failure pressures: 9 * cu * B in cohesive soil (starting below 1.5B depth) and 3 * Kp * sigma'_v * B in cohesionless soil.
Non-linear p-y curve analysis solves the Fourth-Order Beam-on-Winkler-Foundation equation to calculate deflection, bending moment, shear force, and soil reactions under working loads.
Last updated: July 2026
10.3 Lateral Load Behavior of Deep Foundations
Deep foundations supporting bridge piers, high-rise buildings, offshore platforms, and retaining walls are frequently subjected to substantial horizontal loads (H) and overturning moments (M). The design of laterally loaded piles requires evaluating both the geotechnical limit state (soil ultimate lateral bearing failure) and the structural limit state (excessive pile deflection or flexural plastic hinge formation).
Pile Stiffness & Relative Embedment Regimes
The fundamental response of a laterally loaded pile depends on whether it behaves as a short (rigid) pile or a long (flexible) pile .
Short (Rigid) Pile: The pile flexural rigidity (EI) is high relative to soil stiffness. Under lateral load, the pile rotates or translates as a rigid body without significant bending, causing soil capacity breakdown along its entire embedment depth.
Long (Flexible) Pile: The pile flexures significantly under load. The lower portion of the pile remains virtually unaffected by lateral forces, and structural failure occurs when the internal bending moment reaches the yield moment capacity M y M_y M y of the pile cross-section, forming a plastic hinge. RIGID VS FLEXIBLE LATERALLY LOADED PILE
- FREE-HEAD SHORT (RIGID) PILE FREE-HEAD LONG (FLEXIBLE) PILE
- H H
- ────┬────> ────┬────>
- │ │
- │ Deflection y │ Deflection y
- │ \ │ \n │ \ │ \ Bending
- │ \ Rigid Rotation │ │ Curve
- │ \ │ ╱
- │ \ │ │ Plastic Hinge (My)
- │ \ │ ╱
- │ \ Rotation Center ││ Zero Deflection
- ▼ \ ▼└────── at depth > 4T
- Stiffness Length Parameters
Cohesionless Soil / Granular Strata (Linearly Increasing Subgrade Modulus k h = n h ⋅ z k_h = n_h \cdot z k h = n h ⋅ z ): The relative stiffness factor (T) is: T = E I n h 5 T = \sqrt[5]{\frac{E I}{n_h}} T = 5 n h E I
Where (E I) is pile flexural rigidity (kN·m² or lb·in²), and n h n_h n h is the modulus of subgrade reaction rate of increase (kN/m³ or lb/in³).
- Rigid Pile Criteria: Embedded length L ≤ 2 T L \le 2 T L ≤ 2 T
- Flexible (Long) Pile Criteria: Embedded length L ≥ 4 T L \ge 4 T L ≥ 4 T
Cohesive Soil / Overconsolidated Clay (Constant Subgrade Modulus K = k h ⋅ B K = k_h \cdot B K = k h ⋅ B ): The elastic length parameter L e L_e L e is: L e = E I K 4 = E I k h B 4 L_e = \sqrt[4]{\frac{E I}{K}} = \sqrt[4]{\frac{E I}{k_h B}} L e = 4 K E I = 4 k h B E I
- Rigid Pile Criteria: Embedded length L ≤ 2.0 L e L \le 2.0 L_e L ≤ 2.0 L e
- Flexible (Long) Pile Criteria: Embedded length L ≥ 3.5 L e L \ge 3.5 L_e L ≥ 3.5 L e
- Broms' Ultimate Lateral Load Method
Broms (1964) developed widely used analytical solutions to determine ultimate lateral load capacity H u H_u H u . The method relies on simplified earth pressure profiles at ultimate soil failure.
1. Broms' Cohesionless Soil (Sand) Assumptions
Ultimate soil resistance per unit length p u p_u p u increases linearly with depth: p u = 3 ⋅ γ ′ ⋅ z ⋅ B ⋅ K p p_u = 3 \cdot \gamma' \cdot z \cdot B \cdot K_p p u = 3 ⋅ γ ′ ⋅ z ⋅ B ⋅ K p Where K p = tan 2 ( 45 ∘ + ϕ ′ / 2 ) = 1 + sin ϕ ′ 1 − sin ϕ ′ K_p = \tan^2(45^\circ + \phi'/2) = \frac{1 + \sin\phi'}{1 - \sin\phi'} K p = tan 2 ( 4 5 ∘ + ϕ ′ /2 ) = 1 − s i n ϕ ′ 1 + s i n ϕ ′ .
Ultimate Capacity Formulas for Long Flexible Pile in Sand:
Free-Head Condition (pile top free to rotate, load applied at height (e) above ground): M m a x = H u ( e + 0.54 H u γ ′ B K p ) = M y M_{max} = H_u \left( e + 0.54 \sqrt{\frac{H_u}{\gamma' B K_p}} \right) = M_y M ma x = H u ( e + 0.54 γ ′ B K p H u ) = M y Solving for H u H_u H u yields the ultimate lateral load required to induce structural yield moment M y M_y M y .
Fixed-Head Condition (pile top restrained against rotation by rigid pile cap): M m a x = 0.50 H u ( e + 0.54 H u γ ′ B K p ) = M y M_{max} = 0.50 H_u \left( e + 0.54 \sqrt{\frac{H_u}{\gamma' B K_p}} \right) = M_y M ma x = 0.50 H u ( e + 0.54 γ ′ B K p H u ) = M y Key Insight: A fixed-head pile in sand achieves approximately 2.0 times higher ultimate lateral capacity than an equivalent free-head pile because fixing the pile head distributes bending moments between the pile head and the underground plastic hinge.
2. Broms' Cohesive Soil (Clay) Assumptions
Soil pressure p u = 0 p_u = 0 p u = 0 from ground surface (z = 0) to depth (z = 1.5 B) (due to surface soil breakaway/tension cracks).
Soil pressure p u = 9 c u B p_u = 9 c_u B p u = 9 c u B constant at depths below (z = 1.5 B).
Ultimate Capacity Formulas for Long Flexible Pile in Clay:
Free-Head Condition: M m a x = H u ( e + 1.5 B + 0.5 f ) = M y where f = H u 9 c u B M_{max} = H_u \left( e + 1.5 B + 0.5 f \right) = M_y \quad \text{where } f = \frac{H_u}{9 c_u B} M ma x = H u ( e + 1.5 B + 0.5 f ) = M y where f = 9 c u B H u
Fixed-Head Condition: M m a x = H u ( 1.5 B + 0.5 f ) = 2 M y M_{max} = H_u \left( 1.5 B + 0.5 f \right) = 2 M_y M ma x = H u ( 1.5 B + 0.5 f ) = 2 M y
Non-Linear p-y Curve Method
While Broms' method checks ultimate load capacity, serviceability design (predicting working deflection (y(z)) and bending moment (M(z))) requires non-linear soil-structure modeling.
The laterally loaded pile is modeled as a beam on a non-linear Winkler foundation governed by the 4th-order differential equation: E I d 4 y d z 4 + P x d 2 y d z 2 + p ( z , y ) = 0 E I \frac{d^4 y}{dz^4} + P_x \frac{d^2 y}{dz^2} + p(z, y) = 0 E I d z 4 d 4 y + P x d z 2 d 2 y + p ( z , y ) = 0
Where:
- (y) = lateral pile deflection at depth (z)
- P x P_x P x = axial structural load on the pile (incorporating P-Delta destabilizing effects)
- (p(z, y)) = non-linear soil reaction force per unit length at deflection (y) NON-LINEAR p-y CURVE CONCEPT
- Pile Deflection y(z) Soil Reaction Curve p(y)
- │ ┌───┐ Soil Reaction p
- │ │ █ │ ▲ p_ult (Ultimate Resistance)
- ├────┼───┼────> Load H │ ┌─────────────────
- │ │ █ │ │ ╱
- │ ╱ █ \ │ ╱ Initial Modulus Es = Epy
- │ │ █ │ │ ╱
- │ ╱ █ \ │╱
- ││ █ │ └──────────────────────> Deflection y
- ▼ █ ▼ (p-y non-linear spring at depth z)
- Matlock (1970) Soft Clay p-y Curve Formulation
For soft saturated clays under short-term static loading, the non-linear p-y relationship is: p p u = 0.5 ( y y 50 ) 1 / 3 for y ≤ 8 y 50 \frac{p}{p_u} = 0.5 \left( \frac{y}{y_{50}} \right)^{1/3} \quad \text{for } y \le 8 y_{50} p u p = 0.5 ( y 50 y ) 1/3 for y ≤ 8 y 50
Where:
y 50 = 2.5 ⋅ ϵ 50 ⋅ B y_{50} = 2.5 \cdot \epsilon_{50} \cdot B y 50 = 2.5 ⋅ ϵ 50 ⋅ B (deflection at 50% of ultimate soil reaction)
ϵ 50 \epsilon_{50} ϵ 50 = strain corresponding to 50% maximum stress in an undrained triaxial test (typically 0.005 for stiff clay to 0.020 for soft clay)
p u = 3 c u B + γ ′ z B + J c u z p_u = 3 c_u B + \gamma' z B + J c_u z p u = 3 c u B + γ ′ z B + J c u z (increasing from surface to 9 c u B 9 c_u B 9 c u B at depth z r z_r z r )
PE-Style Worked Example: Broms' Method in Sand
Problem: A steel pipe pile with outer diameter D = 610 mm D = 610\text{ mm} D = 610 mm (0.61 m), wall thickness t = 12.7 mm t = 12.7\text{ mm} t = 12.7 mm , yield moment capacity M y = 680 kN ⋅ m M_y = 680\text{ kN}\cdot\text{m} M y = 680 kN ⋅ m , and flexural rigidity E I = 1.15 × 10 5 kN ⋅ m 2 EI = 1.15 \times 10^5\text{ kN}\cdot\text{m}^2 E I = 1.15 × 1 0 5 kN ⋅ m 2 is driven to a depth L = 16.0 m L = 16.0\text{ m} L = 16.0 m into loose-to-medium sand. Soil properties:
- Effective unit weight γ ′ = 10.0 kN/m 3 \gamma' = 10.0\text{ kN/m}^3 γ ′ = 10.0 kN/m 3
- Friction angle ϕ ′ = 34 ∘ \phi' = 34^\circ ϕ ′ = 3 4 ∘
- Modulus of subgrade reaction rate n h = 12 , 000 kN/m 3 n_h = 12,000\text{ kN/m}^3 n h = 12 , 000 kN/m 3
The pile has a free-head boundary condition, and lateral load (H) acts at height e = 1.2 m e = 1.2\text{ m} e = 1.2 m above the ground surface.
Calculate:
Stiffness factor (T) and verify if the pile is flexible (long).
Ultimate lateral load H u H_u H u using Broms' method.
Allowable working lateral load H a l l H_{all} H a ll using a factor of safety (FS = 2.5).
Solution Step-by-Step:
1. Verify Long (Flexible) Pile Behavior: T = E I n h 5 = 1.15 × 10 5 kN ⋅ m 2 12 , 000 kN/m 3 5 = 9.5833 5 = 1.571 m T = \sqrt[5]{\frac{EI}{n_h}} = \sqrt[5]{\frac{1.15 \times 10^5\text{ kN}\cdot\text{m}^2}{12,000\text{ kN/m}^3}} = \sqrt[5]{9.5833} = 1.571\text{ m} T = 5 n h E I = 5 12 , 000 kN/m 3 1.15 × 1 0 5 kN ⋅ m 2 = 5 9.5833 = 1.571 m
Critical embedded length for flexible pile: L c r i t = 4 T = 4 ⋅ ( 1.571 m ) = 6.28 m L_{crit} = 4 T = 4 \cdot (1.571\text{ m}) = 6.28\text{ m} L cr i t = 4 T = 4 ⋅ ( 1.571 m ) = 6.28 m .
Since embedded pile length L = 16.0 m > 6.28 m L = 16.0\text{ m} > 6.28\text{ m} L = 16.0 m > 6.28 m , the pile behaves as a long flexible pile .
2. Broms' Passive Pressure Coefficient K p K_p K p : K p = tan 2 ( 45 ∘ + 34 ∘ / 2 ) = tan 2 ( 62 ∘ ) = ( 1.8807 ) 2 = 3.537 K_p = \tan^2(45^\circ + 34^\circ/2) = \tan^2(62^\circ) = (1.8807)^2 = 3.537 K p = tan 2 ( 4 5 ∘ + 3 4 ∘ /2 ) = tan 2 ( 6 2 ∘ ) = ( 1.8807 ) 2 = 3.537
Earth pressure factor denominator: γ ′ ⋅ B ⋅ K p = 10.0 kN/m 3 ⋅ 0.61 m ⋅ 3.537 = 21.576 kN/m 2 \gamma' \cdot B \cdot K_p = 10.0\text{ kN/m}^3 \cdot 0.61\text{ m} \cdot 3.537 = 21.576\text{ kN/m}^2 γ ′ ⋅ B ⋅ K p = 10.0 kN/m 3 ⋅ 0.61 m ⋅ 3.537 = 21.576 kN/m 2
3. Broms' Moment Equation for Free-Head Long Pile in Sand: M m a x = H u ( e + 0.54 H u γ ′ B K p ) = M y M_{max} = H_u \left( e + 0.54 \sqrt{\frac{H_u}{\gamma' B K_p}} \right) = M_y M ma x = H u ( e + 0.54 γ ′ B K p H u ) = M y 680 = H u ( 1.2 + 0.54 H u 21.576 ) 680 = H_u \left( 1.2 + 0.54 \sqrt{\frac{H_u}{21.576}} \right) 680 = H u ( 1.2 + 0.54 21.576 H u ) 680 = 1.2 H u + 0.54 ⋅ H u 1.5 21.576 = 1.2 H u + 0.11626 ⋅ H u 1.5 680 = 1.2 H_u + 0.54 \cdot \frac{H_u^{1.5}}{\sqrt{21.576}} = 1.2 H_u + 0.11626 \cdot H_u^{1.5} 680 = 1.2 H u + 0.54 ⋅ 21.576 H u 1.5 = 1.2 H u + 0.11626 ⋅ H u 1.5
Let us solve this non-linear equation for H u H_u H u via iteration:
Try H u = 180 kN H_u = 180\text{ kN} H u = 180 kN : 1.2 ( 180 ) + 0.11626 ( 180 ) 1.5 = 216 + 0.11626 ( 2414.9 ) = 216 + 280.76 = 496.76 kN ⋅ m < 680 1.2(180) + 0.11626(180)^{1.5} = 216 + 0.11626(2414.9) = 216 + 280.76 = 496.76\text{ kN}\cdot\text{m} < 680 1.2 ( 180 ) + 0.11626 ( 180 ) 1.5 = 216 + 0.11626 ( 2414.9 ) = 216 + 280.76 = 496.76 kN ⋅ m < 680
Try H u = 220 kN H_u = 220\text{ kN} H u = 220 kN : 1.2 ( 220 ) + 0.11626 ( 220 ) 1.5 = 264 + 0.11626 ( 3263.1 ) = 264 + 379.37 = 643.37 kN ⋅ m < 680 1.2(220) + 0.11626(220)^{1.5} = 264 + 0.11626(3263.1) = 264 + 379.37 = 643.37\text{ kN}\cdot\text{m} < 680 1.2 ( 220 ) + 0.11626 ( 220 ) 1.5 = 264 + 0.11626 ( 3263.1 ) = 264 + 379.37 = 643.37 kN ⋅ m < 680
Try H u = 229 kN H_u = 229\text{ kN} H u = 229 kN : 1.2 ( 229 ) + 0.11626 ( 229 ) 1.5 = 274.8 + 0.11626 ( 3465.7 ) = 274.8 + 402.92 = 677.72 kN ⋅ m 1.2(229) + 0.11626(229)^{1.5} = 274.8 + 0.11626(3465.7) = 274.8 + 402.92 = 677.72\text{ kN}\cdot\text{m} 1.2 ( 229 ) + 0.11626 ( 229 ) 1.5 = 274.8 + 0.11626 ( 3465.7 ) = 274.8 + 402.92 = 677.72 kN ⋅ m
Try H u = 229.6 kN H_u = 229.6\text{ kN} H u = 229.6 kN : 1.2 ( 229.6 ) + 0.11626 ( 229.6 ) 1.5 = 275.52 + 0.11626 ( 3479.3 ) = 275.52 + 404.50 = 680.02 kN ⋅ m 1.2(229.6) + 0.11626(229.6)^{1.5} = 275.52 + 0.11626(3479.3) = 275.52 + 404.50 = 680.02\text{ kN}\cdot\text{m} 1.2 ( 229.6 ) + 0.11626 ( 229.6 ) 1.5 = 275.52 + 0.11626 ( 3479.3 ) = 275.52 + 404.50 = 680.02 kN ⋅ m (Matches M y = 680 M_y = 680 M y = 680 )
Thus, ultimate lateral load H u = 229.6 kN H_u = 229.6\text{ kN} H u = 229.6 kN .
4. Depth to Maximum Bending Moment z m z_m z m : z m = 0.54 H u γ ′ B K p = 0.54 229.6 21.576 = 0.54 ⋅ 3.262 = 1.76 m below ground z_m = 0.54 \sqrt{\frac{H_u}{\gamma' B K_p}} = 0.54 \sqrt{\frac{229.6}{21.576}} = 0.54 \cdot 3.262 = 1.76\text{ m below ground} z m = 0.54 γ ′ B K p H u = 0.54 21.576 229.6 = 0.54 ⋅ 3.262 = 1.76 m below ground
5. Allowable Lateral Design Load: H a l l = H u F S = 229.6 kN 2.5 = 91.84 kN ≈ 91.8 kN H_{all} = \frac{H_u}{FS} = \frac{229.6\text{ kN}}{2.5} = 91.84\text{ kN} \approx 91.8\text{ kN} H a ll = FS H u = 2.5 229.6 kN = 91.84 kN ≈ 91.8 kN