Study guide

4.2 Workstation Design, Aisle Sizing & Space Requirements Planning

PE Industrial and Systems Exam

Track your progress as you read

Finished sections get a check mark.

1 Exam Overview, Strategy & Systems Foundations

1.1 PE Industrial Exam Format, Official Specification & Reference Handbook Strategy 1.2 System Analysis Tools, Process Definition, Requirements Engineering & QFD 1.3 Performance Measures: Output, Productivity, OEE, Cost & Environmental Sustainability 1.4 Process Types (Discrete, Continuous, Manufacturing, Service) & Value Analysis/Engineering

2 Optimization, Queueing, Simulation, Networks & Markov Chains

2.1 Linear Programming Formulation, Graphical Solutions & Sensitivity Analysis 2.2 Queueing Theory Models (M/M/1, M/M/s) & Little's Law Applications 2.3 Discrete-Event Simulation, Random Variates & Model Validation 2.4 Graph Theory & Network Models: Shortest Path, Minimal Spanning Tree & Maximum Flow 2.5 Markov Chains: Transition Matrices, Steady-State Probabilities & Absorbing States 2.6 Decision Trees, Expected Value & Bottleneck Analysis (Theory of Constraints)

3 Project Management & Planning

3.1 Project Scheduling with CPM and PERT: Critical Path, Float, Probability & Crashing 3.2 Project Planning & Control: Scope and WBS, Gantt Charts, Critical Chain (CCPM), Risk & Earned Value

4 Facility Layout, Space, Capacity & Material Handling

4.1 Systematic Layout Planning (SLP) & Activity Relationship (REL) Analysis 4.2 Workstation Design, Aisle Sizing & Space Requirements Planning 4.3 Capacity Analysis: Machine Requirements, Scrap Allowances & Personnel Requirements 4.4 Material Handling Equipment Selection, Unit Loads & Handling Principles

5 Site Location, Warehousing & Facility Economics

5.1 Facility Location Models: Center of Gravity & Minisum / Minimax Distance 5.2 Warehousing Systems, Storage Assignment & Order Picking Operations 5.3 Facility Life-Cycle Economics, Replacement Analysis & Rearrangement Costs

6 Demand Forecasting, Production Planning, MRP & JIT

6.1 Demand Forecasting Methods: Moving Averages, Exponential Smoothing & Error Metrics 6.2 Aggregate Planning Strategies & Master Production Scheduling (MPS) 6.3 Material Requirements Planning (MRP), Bill of Materials & Capacity Planning 6.4 Just-in-Time & Lean Production Planning: Pull Systems, Kanban Sizing, Heijunka & SMED

7 Inventory Systems, Scheduling, Logistics & Transportation Modes

7.1 Deterministic Inventory Control: Classical EOQ, EPQ & Quantity Discounts 7.2 Stochastic Inventory Management: Safety Stock, Continuous / Periodic Review & Newsvendor 7.3 Production Sequencing, Dispatching Rules & Johnson's Algorithm 7.4 Supply Chain Logistics, Transportation Simplex & Distribution Network Design 7.5 Transportation Modes, Freight Economics & the Transshipment Model

8 Engineering Economics, Break-Even Analysis & Costing Systems

8.1 Equivalence, Cash Flow Analysis & Discounted Cash Flow Metrics (PW, FW, EAC) 8.2 Rate of Return Analysis (IRR, Incremental IRR) & Benefit-Cost (B/C) Ratios 8.3 Asset Depreciation (MACRS, Straight-Line), Tax Effects & Replacement Decisions 8.4 Break-Even Analysis, Technical Capability Assessment & Costing Systems (Traditional, ABC & Standard Costs)

9 Methods Engineering, Work Measurement, Learning Curves, Line Balancing & Process Planning

9.1 Methods Analysis, Process Charting & Motion Study (Therbligs, 5S) 9.2 Worker–Machine (Man–Machine) Charts, Multiple Activity Analysis & Synchronous Servicing 9.3 Time Study Fundamentals, Performance Rating & Allowance Factors 9.4 Predetermined Motion Time Systems (PMTS, MTM, MOST) & Work Sampling 9.5 Learning Curves: Unit and Cumulative-Average Models, Learning Rates & Applications 9.6 Assembly Line Balancing, Precedence Constraints & Efficiency Heuristics 9.7 Manufacturing & Service Process Planning: Operation Selection, Sequencing, Route Sheets, Fixturing & Mistake Proofing

10 Ergonomics, Human Capacity, Occupational Safety & DART Rates

10.1 Anthropometry, Percentile Design, Workstation Ergonomics & Link Analysis 10.2 Industrial Biomechanics, the NIOSH Lifting Equation & Lifting Aids 10.3 Limits of Human Capacity & Risk-Factor Tools: Work Physiology, Strength, Range of Motion, Vision, RULA & Slip Resistance 10.4 Environmental Ergonomics (Noise, Heat, Illumination), Human-Machine Systems & OSHA Safety 10.5 Safety Codes, Standards & Voluntary Guidelines (OSHA, ANSI, NIOSH, MIL-STD) and DART Rate Calculations

11 Statistical Process Control & Process Capability

11.1 Statistical Process Control for Variables (X-bar/R and X-bar/s Charts) 11.2 Statistical Process Control for Attributes (p, np, c, and u Charts) 11.3 Process Capability Indices (Cp, Cpk, Cpm, Pp, Ppk) & Sigma Levels

12 Design of Experiments, Acceptance Sampling & Quality Systems

12.1 Design of Experiments: 2^k Factorials, ANOVA & Taguchi Robust Design 12.2 Acceptance Sampling: OC Curves, AQL, LTPD, AOQL, Z1.4/MIL-STD-105E & Dodge-Romig 12.3 Quality Systems (Deming, TQM, ISO 9000, Benchmarking), Root Cause Analysis & DMAIC

13 Reliability Engineering & Maintenance Systems

13.1 Reliability Modeling, Failure Rates (lambda) & Life Distributions (Exponential, Weibull) 13.2 System Reliability Architecture: Series, Parallel, k-out-of-n & Redundancy 13.3 Equipment Maintenance Engineering, Availability (A), MTBF/MTTR & RCM

4.2 Workstation Design, Aisle Sizing & Space Requirements Planning

Key Takeaways Explain This Topic AI

The total space required by an individual workstation is calculated using the four-component model: A = A_E + A_M + A_O + A_S, accounting for equipment footprint, maintenance access, operator work envelope, and material staging buffers.

Departmental gross floor area converts net workstation footprints into total facility space by applying aisle allowance factors (typically 5% to 35%), which can be formulated either as a net multiplier A_gross = A_net * (1 + f_aisle) or as a gross space fraction A_gross = A_net / (1 - eta_aisle).

Aisle width standards are governed by handling equipment and traffic density: 3 ft for one-way pedestrians, 4-5 ft for manual pallet jacks, 6-8 ft for one-way forklifts, 10-14 ft for two-way counterbalanced forklifts, and 5-6 ft for guided very narrow aisle (VNA) trucks.

National Electrical Code (NEC 110.26) mandates a minimum clear working space in front of electrical control panels of 36 to 48 inches depth and 30 inches width, which must be incorporated into workstation maintenance clearances (A_M).

Building structural constraints—including column grid bay spacing (e.g., 40x40 ft or 50x50 ft), truss clear heights below NFPA 13 sprinkler heads (18 in standard, 36 in ESFR), and floor slab load-bearing capacities (PSF)—impose rigid geometric boundaries on space planning.

Last updated: October 2026

Workstation Design, Aisle Sizing & Space Requirements Planning

Space planning is the critical link converting process routings and equipment lists into physical architectural floor space. Underestimating space requirements leads to severe aisle congestion, inventory staging bottlenecks, ergonomic strain, and safety violations. Overestimating space inflates capital building expenditure, extends material handling travel distances, and increases recurring facility overhead (such as heating, cooling, lighting, and taxes).

An industrial engineer must determine space requirements systematically, progressing from individual workstation micro-components up to macroscopic departmental boundaries.

Workstation Space Calculation Framework

A workstation represents the smallest independent production cell or administrative unit in a facility. The total floor area A A A allocated to an individual workstation is calculated using the foundational four-element equation:

A = A E + A M + A O + A S A = A_E + A_M + A_O + A_S A = A E ​ + A M ​ + A O ​ + A S ​

Where:

  • A E A_E A E ​ = Equipment footprint area
  • A M A_M A M ​ = Machine maintenance and service clearance area
  • A O A_O A O ​ = Operator work envelope and ergonomic clearance area

A S A_S A S ​ = Material staging, work-in-process (WIP), and scrap storage area +-------------------------------------------------------------+

  • | WORKSTATION BOUNDARY |
  • | |
  • | +--------------------+ +----------------------------+ |
  • | | MAINTENANCE & | | MATERIAL STAGING | |
  • | | SERVICE SPACE | | (A_S) | |
  • | | (A_M) | | [Inbound / Outbound WIP] | |
  • | +--------------------+ +----------------------------+ |
  • | |
  • | +--------------------+ +----------------------------+ |
  • | | EQUIPMENT SPACE | | OPERATOR WORKSPACE | |
  • | | (A_E) | | (A_O) | |
  • | | [Machine Footprint]| | [Reach Zone & Envelopes] | |
  • | +--------------------+ +----------------------------+ |
  • +-------------------------------------------------------------+
  • 1. Equipment Space ( A E A_E A E ​ )

Equipment space represents the total physical floor area occupied by the machine and its permanent auxiliary attachments. Crucially, A E A_E A E ​ must encompass not only the static machine base but its maximum dynamic operating envelope :

Extreme travel positions of machine tables, cross-slides, and gantry carriages.

Extended swing arcs of access doors, electrical cabinet doors, and tool carousel changers.

Auxiliary hardware attached directly to the machine: hydraulic power units (HPUs), coolant filtration tanks, mist collectors, swarf/chip conveyors, bar feeders, and pneumatic accumulators.

2. Maintenance and Service Space ( A M A_M A M ​ )

Every production machine requires routine preventive maintenance, component lubrication, tooling setups, and eventual overhaul. Failure to plan A M A_M A M ​ forces maintenance personnel into active traffic aisles or adjacent work envelopes:

Access Clearances: A perimeter clearance of 24 to 36 inches around machine sides and rear walls for motor removal, spindle extraction, filter replacement, and lubricating reservoir checks.

Regulatory Clearances (NEC Article 110.26): The National Electrical Code (NEC) legally mandates clear working space in front of all industrial electrical control enclosures, disconnect switches, and motor control centers (MCCs):

Minimum clear width: Width of the equipment or 30 inches (0.76 m), whichever is greater.

Minimum clear depth: 36 inches (0.91 m) for 0–150 V to ground. For 151–1,000 V it is 36 inches (Condition 1), 42 inches (Condition 2, live parts facing a grounded surface such as concrete or steel), or 48 inches (Condition 3, live parts on both sides). Editions before the 2020 NEC used 151–600 V for this row.

Clear working headroom: Minimum 6.5 feet (1.98 m) or height of the equipment.

3. Operator Workspace ( A O A_O A O ​ )

Operator space must support ergonomic human task execution without physical interference:

Primary Work Zone (The "Golden Zone"): The immediate sweep of the forearms with elbows at 90 ∘ 90^\circ 9 0 ∘ ( 14 − 18 inches 14-18\text{ inches} 14 − 18 inches reach radius), located between waist and mid-chest height. Tools and frequently picked parts must reside within this zone.

Secondary Work Zone: Full arm reach extended from the shoulder without bending the torso ( 20 − 26 inches 20-26\text{ inches} 20 − 26 inches reach radius).

Physical Envelope Clearances: A dedicated clear floor area of at least 30 × 36 inches 30 \times 36\text{ inches} 30 × 36 inches ( 7.5 ft 2 7.5\text{ ft}^2 7.5 ft 2 ) for a standing operator, expanding to 36 × 48 inches 36 \times 48\text{ inches} 36 × 48 inches ( 12.0 ft 2 12.0\text{ ft}^2 12.0 ft 2 ) if the operator is seated in an ergonomic swivel chair or moves laterally between two machine stations. Anti-fatigue matting must be fully contained within A O A_O A O ​ .

4. Material Staging Space ( A S A_S A S ​ )

Material staging accommodates inbound raw stock, in-process buffers, outbound finished lots, and scrap/rework containers. Under-sizing A S A_S A S ​ leads directly to parts encroaching into walkways.

The required staging footprint is formulated as:

A S = ∑ k = 1 m N k × ( L k × W k S k ) × ( 1 + c k ) A_S = \sum_{k=1}^m N_k \times \left( \frac{L_k \times W_k}{S_k} \right) \times (1 + c_k) A S ​ = ∑ k = 1 m ​ N k ​ × ( S k ​ L k ​ × W k ​ ​ ) × ( 1 + c k ​ )

Where:

N k N_k N k ​ = maximum number of containers of type k k k buffered at the station.

L k × W k L_k \times W_k L k ​ × W k ​ = physical base footprint dimensions of container k k k (e.g., standard 48 × 40 inch 48 \times 40\text{ inch} 48 × 40 inch GMA pallet = 13.33 ft 2 13.33\text{ ft}^2 13.33 ft 2 ).

S k S_k S k ​ = maximum safe vertical stacking height (number of containers high; S k = 1 S_k = 1 S k ​ = 1 if containers cannot be stacked).

c k c_k c k ​ = container accessibility and handling clearance factor (typically 0.15 0.15 0.15 to 0.25 0.25 0.25 , allowing room to insert pallet jack forks or lift hoists).

To establish container count N k N_k N k ​ , industrial engineers leverage Little's Law from queueing theory:

W I P = T H × C T WIP = TH \times CT W I P = T H × CT

Where T H TH T H is the workstation throughput rate and C T CT CT is the cycle/residence time (including queue wait time). Container count is then derived by dividing peak W I P WIP W I P by container batch capacity.

Departmental Space Determination & Aisle Allowances

Once individual workstation footprints are calculated, they are aggregated into departmental net area ( A n e t A_{net} A n e t ​ ):

A n e t = ∑ j = 1 M n j A j A_{net} = \sum_{j=1}^M n_j A_j A n e t ​ = ∑ j = 1 M ​ n j ​ A j ​

Where n j n_j n j ​ is the quantity of identical production stations of type j j j , and A j A_j A j ​ is the comprehensive footprint ( A E + A M + A O + A S A_E + A_M + A_O + A_S A E ​ + A M ​ + A O ​ + A S ​ ) of that station.

However, A n e t A_{net} A n e t ​ includes only localized within-station spaces. It does not account for internal departmental aisles, forklift turning aprons, personnel walking paths, or utility risers. To convert net area into Gross Departmental Area ( A g r o s s A_{gross} A g ross ​ ) , industrial engineers apply an Aisle Allowance Factor .

Aisle Allowance Mathematical Formulations

In engineering practice and professional exams, aisle allowances are expressed in two distinct mathematical conventions. Distinguishing between them is vital:

Aisle Allowance as an Adder to Net Area ( f a i s l e f_{aisle} f ai s l e ​ ): A g r o s s = A n e t × ( 1 + f a i s l e ) A_{gross} = A_{net} \times (1 + f_{aisle}) A g ross ​ = A n e t ​ × ( 1 + f ai s l e ​ ) Here, f a i s l e f_{aisle} f ai s l e ​ represents the ratio of aisle space to net workstation space. For example, if A n e t = 10 , 000 ft 2 A_{net} = 10,000\text{ ft}^2 A n e t ​ = 10 , 000 ft 2 and the aisle allowance is 25 % 25\% 25% , then A g r o s s = 10 , 000 × 1.25 = 12 , 500 ft 2 A_{gross} = 10,000 \times 1.25 = 12,500\text{ ft}^2 A g ross ​ = 10 , 000 × 1.25 = 12 , 500 ft 2 .

Aisle Space as a Percentage of Total Gross Area ( η a i s l e \eta_{aisle} η ai s l e ​ ): A g r o s s = A n e t 1 − η a i s l e A_{gross} = \frac{A_{net}}{1 - \eta_{aisle}} A g ross ​ = 1 − η ai s l e ​ A n e t ​ ​ Here, η a i s l e \eta_{aisle} η ai s l e ​ represents the proportion of the final building envelope devoted to aisles. If aisles constitute 20 % 20\% 20% of the gross building area, then A g r o s s = 10 , 000 / ( 1 − 0.20 ) = 12 , 500 ft 2 A_{gross} = 10,000 / (1 - 0.20) = 12,500\text{ ft}^2 A g ross ​ = 10 , 000/ ( 1 − 0.20 ) = 12 , 500 ft 2 .

Note that an aisle allowance adder of f a i s l e = 0.25 f_{aisle} = 0.25 f ai s l e ​ = 0.25 is mathematically equivalent to a gross aisle proportion of η a i s l e = 0.20 \eta_{aisle} = 0.20 η ai s l e ​ = 0.20 .

Typical Aisle Allowance Guidelines

Industry / Operation Classification Typical Net Aisle Allowance ( f a i s l e f_{aisle} f ai s l e ​ ) Dominant Material Handling Mode

  • Small Parts Assembly / Electronics 5% – 15% Manual handling, tote bins, hand carts
  • Light Machining / Bench Assembly 15% – 20% Manual pallet jacks, walkie stackers
  • Medium Manufacturing / Machine Shops 20% – 25% Counterbalanced lift trucks, motorized tuggers
  • Heavy Fabrication / Press Stamping 25% – 35% Heavy forklifts, die carts, overhead crane drops
  • Warehouse / Pallet Racking (Wide Aisle) 30% – 40% Standard counterbalanced forklift right-angle stacking
  • Industrial Aisle Planning Guidelines & Clear Width Standards

Aisles represent valuable floor space that generates no direct production revenue; yet undersized aisles cause forklift collisions, damaged inventory, traffic bottlenecks, and OSHA citations.

Industrial aisles are organized into a strict functional hierarchy:

Main Arterial Aisles: Heavy-traffic thoroughfares connecting receiving docks, central storage, primary manufacturing bays, and outbound shipping docks.

Cross Aisles: Intermediate corridors connecting main aisles at regular intervals, distributing traffic and providing emergency egress paths.

Branch / Service Aisles: Local interior corridors providing direct access to individual machine rows, rack corridors, and assembly workstations.

Engineering Aisle Width Reference Standards

Traffic Classification Minimum Clear Width (ft) Clear Width (in / mm) Engineering Design Rules & Clearances

Pedestrian (One-Way) 3.0 ft 36 in / 914 mm Common design width; OSHA 29 CFR 1910.36(g)(2) sets the exit-route minimum at 28 in

Pedestrian (Two-Way) 4.5 – 5.0 ft 54 – 60 in / 1372 – 1524 mm Bi-directional walking without personnel shoulder contact

Manual Hand Truck / Cart 4.0 – 5.0 ft 48 – 60 in / 1219 – 1524 mm Cart width plus 12 inches operator clearance

Manual / Walkie Pallet Jack 5.0 – 6.0 ft 60 – 72 in / 1524 – 1829 mm 40-inch pallet width plus 10–16 inches operator maneuvering clearance

Forklift (One-Way, No Turning) 6.0 – 8.0 ft 72 – 96 in / 1829 – 2438 mm Truck width + load overhang + 24 in lateral operating margin

Counterbalanced Forklift (Two-Way Passing) 10.0 – 14.0 ft 120 – 168 in / 3048 – 4267 mm Standard rule: W a i s l e = 2 × W t r u c k / l o a d + 3.0 ft W_{aisle} = 2 \times W_{truck/load} + 3.0\text{ ft} W ai s l e ​ = 2 × W t r u c k / l o a d ​ + 3.0 ft clearance

Right-Angle Stacking (Standard Forklift) 11.0 – 13.5 ft 132 – 162 in / 3353 – 4115 mm Equal to truck turning radius ( T R TR TR ) + load length ( L L L ) + 12 in clearance

Narrow Aisle (NA) Reach Truck 7.5 – 9.5 ft 90 – 114 in / 2286 – 2896 mm Pantograph scissor reach mechanism; outrigger straddle base

Very Narrow Aisle (VNA) Turret Truck 5.0 – 6.0 ft 60 – 72 in / 1524 – 1829 mm Rail or inductive wire-guided; load width plus 6–12 inches total margin

Building Architectural and Structural Constraints

A layout cannot exist in a theoretical vacuum; it is bounded by the civil and structural architecture of the building. Facility engineers must account for four major structural parameters:

1. Column Grid Bays

Industrial buildings are constructed using rectangular column grids (bays). Typical bay sizes range from 30 × 30 ft 30 \times 30\text{ ft} 30 × 30 ft up to 50 × 50 ft 50 \times 50\text{ ft} 50 × 50 ft or larger in modern distribution centers:

Column Interference: Columns must NEVER be situated inside main travel aisles or within operator workstations.

Bay Modulus: The spacing between columns should match an integer multiple of standard pallet rack dimensions or machine cell modules. For example, a 40-foot bay accommodating back-to-back pallet racks with 8-foot beam spans allows efficient utilization with columns aligned inside flue spaces between rack rows.

2. Truss Clear Height & Overhead Clearances

Clear height is defined as the vertical distance measured from the finished floor slab to the lowest underside of roof trusses, bar joists, or overhead structural steel:

Overhead cranes, elevated mezzanines, and high-density pallet racks are constrained by clear height.

Fire Protection Standards (NFPA 13): Storage and machinery must maintain mandatory vertical clearance beneath fire sprinkler heads:

Minimum 18 inches (0.46 m) clearance below standard upright/pendant sprinkler deflectors.

Minimum 36 inches (0.91 m) clearance below Early Suppression Fast Response (ESFR) or large-drop storage sprinkler heads.

3. Floor Slab Load-Bearing Capacity

Industrial concrete floor slabs (typically 6 to 10 inches thick, reinforced with welded rebar fabric) are rated for two distinct structural load conditions:

Uniform Distributed Live Load: Expressed in pounds per square foot ( l b / f t 2 lb/ft^2 l b / f t 2 or PSF). Typical manufacturing floors range from 250 to 500 PSF , while heavy warehousing floors support 800 to 1,200+ PSF .

Concentrated Point Loads: High-density pallet rack upright posts transfer massive point loads (e.g., 15,000 to 30,000 lb per column baseplate). Baseplates must be sized ( A p l a t e = P / f c ′ A_{plate} = P / f'_c A pl a t e ​ = P / f c ′ ​ ) to distribute the load without exceeding the allowable compressive bearing capacity of the concrete slab.

4. Shipping and Receiving Dock Apron Clearances

Dock planning requires substantial outdoor yard space to accommodate tractor-trailers:

Dock Door Dimensions: Standard doors are 8 × 9 ft 8 \times 9\text{ ft} 8 × 9 ft or 9 × 10 ft 9 \times 10\text{ ft} 9 × 10 ft , spaced on minimum 12-foot centers.

Truck Apron Space: The apron space is the open paved yard depth measured perpendicular from the face of the dock bumpers to the nearest obstruction (fence, parking line, or opposing building). For modern 53-foot trailers with tandem axles, the minimum required apron space is 120 to 140 feet to allow a truck to maneuver and back squarely into the dock bay in a single pull.

Worked Engineering Space Sizing Calculation

Problem Statement: An industrial manufacturing facility is establishing a new Precision Milling Department. Production forecasts require 6 identical CNC Vertical Machining Centers (VMCs) and 2 Manual Deburring Stations.

Station Specifications:

Each CNC Machine Center:

Equipment base footprint: 12 ft × 8 ft = 96 ft 2 12\text{ ft} \times 8\text{ ft} = 96\text{ ft}^2 12 ft × 8 ft = 96 ft 2 .

Tool changer and dynamic chip conveyor extension: 4 ft × 3 ft = 12 ft 2 4\text{ ft} \times 3\text{ ft} = 12\text{ ft}^2 4 ft × 3 ft = 12 ft 2 .

Maintenance access: 3-foot perimeter clearance along both sides and rear ( 60 ft 2 60\text{ ft}^2 60 ft 2 ).

Operator workspace ( A O A_O A O ​ ): Front console operating zone of 4 ft × 8 ft = 32 ft 2 4\text{ ft} \times 8\text{ ft} = 32\text{ ft}^2 4 ft × 8 ft = 32 ft 2 .

Material staging ( A S A_S A S ​ ): Space for 2 standard GMA pallets ( 48 × 40 in = 13.33 ft 2 48 \times 40\text{ in} = 13.33\text{ ft}^2 48 × 40 in = 13.33 ft 2 each) plus 1 scrap tote ( 8 ft 2 8\text{ ft}^2 8 ft 2 ). Pallets cannot be stacked. An accessibility factor of 20 % 20\% 20% is required: ( 2 × 13.33 + 8 ) × 1.20 = 41.6 ft 2 (2 \times 13.33 + 8) \times 1.20 = 41.6\text{ ft}^2 ( 2 × 13.33 + 8 ) × 1.20 = 41.6 ft 2 .

Each Deburring Station:

Equipment footprint ( A E A_E A E ​ ): Workbench and rotary buffing wheel = 24 ft 2 24\text{ ft}^2 24 ft 2 .

Maintenance space ( A M A_M A M ​ ): Rear exhaust filter clearance = 12 ft 2 12\text{ ft}^2 12 ft 2 .

Operator space ( A O A_O A O ​ ): Sit-stand operator zone = 20 ft 2 20\text{ ft}^2 20 ft 2 .

Staging space ( A S A_S A S ​ ): Inbound/outbound tote buffer = 18 ft 2 18\text{ ft}^2 18 ft 2 .

Departmental Aisle Allowance: Handling involves motorized walkie pallet jacks and tuggers; the facility standard specifies a 25 % 25\% 25% aisle allowance adder on net space ( f a i s l e = 0.25 f_{aisle} = 0.25 f ai s l e ​ = 0.25 ).

Step-by-Step Solution:

Calculate Net Space per CNC Machine Station: A E , C N C = 96 + 12 = 108 ft 2 A M , C N C = 60 ft 2 A O , C N C = 32 ft 2 A S , C N C = 41.6 ft 2 A C N C = 108 + 60 + 32 + 41.6 = 241.6 ft 2 \begin{aligned}

  • A_{E, CNC} &= 96 + 12 = 108\text{ ft}^2 \\
  • A_{M, CNC} &= 60\text{ ft}^2 \\
  • A_{O, CNC} &= 32\text{ ft}^2 \\
  • A_{S, CNC} &= 41.6\text{ ft}^2 \\
  • A_{CNC} &= 108 + 60 + 32 + 41.6 = 241.6\text{ ft}^2

\end{aligned} A E , CNC ​ A M , CNC ​ A O , CNC ​ A S , CNC ​ A CNC ​ ​ = 96 + 12 = 108 ft 2 = 60 ft 2 = 32 ft 2 = 41.6 ft 2 = 108 + 60 + 32 + 41.6 = 241.6 ft 2 ​

Calculate Net Space per Deburring Station:

A d e b u r r = 24 + 12 + 20 + 18 = 74.0 ft 2 A_{deburr} = 24 + 12 + 20 + 18 = 74.0\text{ ft}^2 A d e b u rr ​ = 24 + 12 + 20 + 18 = 74.0 ft 2

Calculate Total Department Net Area ( A n e t A_{net} A n e t ​ ): A n e t = ( 6 × A C N C ) + ( 2 × A d e b u r r ) = ( 6 × 241.6 ) + ( 2 × 74.0 ) = 1 , 449.6 + 148.0 = 1 , 597.6 ft 2 \begin{aligned}

  • A_{net} &= (6 \times A_{CNC}) + (2 \times A_{deburr}) \\
  • &= (6 \times 241.6) + (2 \times 74.0) \\
  • &= 1,449.6 + 148.0 = 1,597.6\text{ ft}^2

\end{aligned} A n e t ​ ​ = ( 6 × A CNC ​ ) + ( 2 × A d e b u rr ​ ) = ( 6 × 241.6 ) + ( 2 × 74.0 ) = 1 , 449.6 + 148.0 = 1 , 597.6 ft 2 ​

Calculate Gross Department Area ( A g r o s s A_{gross} A g ross ​ ): A g r o s s = A n e t × ( 1 + f a i s l e ) = 1 , 597.6 × ( 1 + 0.25 ) = 1 , 597.6 × 1.25 = 1 , 997.0 ft 2 \begin{aligned}

  • A_{gross} &= A_{net} \times (1 + f_{aisle}) \\
  • &= 1,597.6 \times (1 + 0.25) \\
  • &= 1,597.6 \times 1.25 = 1,997.0\text{ ft}^2

\end{aligned} A g ross ​ ​ = A n e t ​ × ( 1 + f ai s l e ​ ) = 1 , 597.6 × ( 1 + 0.25 ) = 1 , 597.6 × 1.25 = 1 , 997.0 ft 2 ​

The department requires a gross building footprint of 1 , 997 ft 2 1,997\text{ ft}^2 1 , 997 ft 2 (or approximately one 45 × 45 ft 45 \times 45\text{ ft} 45 × 45 ft building bay).