Study guide
7.5 Transportation Modes, Freight Economics & the Transshipment Model
PE Industrial and Systems Exam
Track your progress as you read
Finished sections get a check mark.
1 Exam Overview, Strategy & Systems Foundations
1.1 PE Industrial Exam Format, Official Specification & Reference Handbook Strategy 1.2 System Analysis Tools, Process Definition, Requirements Engineering & QFD 1.3 Performance Measures: Output, Productivity, OEE, Cost & Environmental Sustainability 1.4 Process Types (Discrete, Continuous, Manufacturing, Service) & Value Analysis/Engineering
2 Optimization, Queueing, Simulation, Networks & Markov Chains
2.1 Linear Programming Formulation, Graphical Solutions & Sensitivity Analysis 2.2 Queueing Theory Models (M/M/1, M/M/s) & Little's Law Applications 2.3 Discrete-Event Simulation, Random Variates & Model Validation 2.4 Graph Theory & Network Models: Shortest Path, Minimal Spanning Tree & Maximum Flow 2.5 Markov Chains: Transition Matrices, Steady-State Probabilities & Absorbing States 2.6 Decision Trees, Expected Value & Bottleneck Analysis (Theory of Constraints)
3 Project Management & Planning
3.1 Project Scheduling with CPM and PERT: Critical Path, Float, Probability & Crashing 3.2 Project Planning & Control: Scope and WBS, Gantt Charts, Critical Chain (CCPM), Risk & Earned Value
4 Facility Layout, Space, Capacity & Material Handling
4.1 Systematic Layout Planning (SLP) & Activity Relationship (REL) Analysis 4.2 Workstation Design, Aisle Sizing & Space Requirements Planning 4.3 Capacity Analysis: Machine Requirements, Scrap Allowances & Personnel Requirements 4.4 Material Handling Equipment Selection, Unit Loads & Handling Principles
5 Site Location, Warehousing & Facility Economics
5.1 Facility Location Models: Center of Gravity & Minisum / Minimax Distance 5.2 Warehousing Systems, Storage Assignment & Order Picking Operations 5.3 Facility Life-Cycle Economics, Replacement Analysis & Rearrangement Costs
6 Demand Forecasting, Production Planning, MRP & JIT
6.1 Demand Forecasting Methods: Moving Averages, Exponential Smoothing & Error Metrics 6.2 Aggregate Planning Strategies & Master Production Scheduling (MPS) 6.3 Material Requirements Planning (MRP), Bill of Materials & Capacity Planning 6.4 Just-in-Time & Lean Production Planning: Pull Systems, Kanban Sizing, Heijunka & SMED
7 Inventory Systems, Scheduling, Logistics & Transportation Modes
7.1 Deterministic Inventory Control: Classical EOQ, EPQ & Quantity Discounts 7.2 Stochastic Inventory Management: Safety Stock, Continuous / Periodic Review & Newsvendor 7.3 Production Sequencing, Dispatching Rules & Johnson's Algorithm 7.4 Supply Chain Logistics, Transportation Simplex & Distribution Network Design 7.5 Transportation Modes, Freight Economics & the Transshipment Model
8 Engineering Economics, Break-Even Analysis & Costing Systems
8.1 Equivalence, Cash Flow Analysis & Discounted Cash Flow Metrics (PW, FW, EAC) 8.2 Rate of Return Analysis (IRR, Incremental IRR) & Benefit-Cost (B/C) Ratios 8.3 Asset Depreciation (MACRS, Straight-Line), Tax Effects & Replacement Decisions 8.4 Break-Even Analysis, Technical Capability Assessment & Costing Systems (Traditional, ABC & Standard Costs)
9 Methods Engineering, Work Measurement, Learning Curves, Line Balancing & Process Planning
9.1 Methods Analysis, Process Charting & Motion Study (Therbligs, 5S) 9.2 Worker–Machine (Man–Machine) Charts, Multiple Activity Analysis & Synchronous Servicing 9.3 Time Study Fundamentals, Performance Rating & Allowance Factors 9.4 Predetermined Motion Time Systems (PMTS, MTM, MOST) & Work Sampling 9.5 Learning Curves: Unit and Cumulative-Average Models, Learning Rates & Applications 9.6 Assembly Line Balancing, Precedence Constraints & Efficiency Heuristics 9.7 Manufacturing & Service Process Planning: Operation Selection, Sequencing, Route Sheets, Fixturing & Mistake Proofing
10 Ergonomics, Human Capacity, Occupational Safety & DART Rates
10.1 Anthropometry, Percentile Design, Workstation Ergonomics & Link Analysis 10.2 Industrial Biomechanics, the NIOSH Lifting Equation & Lifting Aids 10.3 Limits of Human Capacity & Risk-Factor Tools: Work Physiology, Strength, Range of Motion, Vision, RULA & Slip Resistance 10.4 Environmental Ergonomics (Noise, Heat, Illumination), Human-Machine Systems & OSHA Safety 10.5 Safety Codes, Standards & Voluntary Guidelines (OSHA, ANSI, NIOSH, MIL-STD) and DART Rate Calculations
11 Statistical Process Control & Process Capability
11.1 Statistical Process Control for Variables (X-bar/R and X-bar/s Charts) 11.2 Statistical Process Control for Attributes (p, np, c, and u Charts) 11.3 Process Capability Indices (Cp, Cpk, Cpm, Pp, Ppk) & Sigma Levels
12 Design of Experiments, Acceptance Sampling & Quality Systems
12.1 Design of Experiments: 2^k Factorials, ANOVA & Taguchi Robust Design 12.2 Acceptance Sampling: OC Curves, AQL, LTPD, AOQL, Z1.4/MIL-STD-105E & Dodge-Romig 12.3 Quality Systems (Deming, TQM, ISO 9000, Benchmarking), Root Cause Analysis & DMAIC
13 Reliability Engineering & Maintenance Systems
13.1 Reliability Modeling, Failure Rates (lambda) & Life Distributions (Exponential, Weibull) 13.2 System Reliability Architecture: Series, Parallel, k-out-of-n & Redundancy 13.3 Equipment Maintenance Engineering, Availability (A), MTBF/MTTR & RCM
7.5 Transportation Modes, Freight Economics & the Transshipment Model
Key Takeaways Explain This Topic AI
Cost per ton-mile generally rises from pipeline and water to rail, truck, and air, while speed and flexibility rise in roughly the opposite order.
Truckload is priced per load or per mile, while LTL is priced per hundredweight by freight class (50 to 500 under the NMFC), weight break, and lane.
Under the deficit weight rule, a shipper may rate a shipment at the next weight break when that is cheaper; the indifference weight is the next break times its rate divided by the current rate.
Mode choice should minimize total logistics cost: freight plus in-transit (pipeline) inventory cost D × value × i × (transit days ÷ 365) plus safety stock effects.
A transshipment model lets flow pass through intermediate nodes such as cross-docks; each transshipment node satisfies flow in = flow out.
Last updated: October 2026
7.5 Transportation Modes, Freight Economics & the Transshipment Model
The specification lists transportation modes (TL, LTL, air, rail, ship) and distribution models (transshipment, direct ship, cross docking, intermediate storage). Freight is often the largest logistics cost, and the mode choice also sets inventory in transit and the safety stock needed to cover transit variability.
1. Mode Characteristics
- Mode Relative cost per ton-mile Speed Reliability Best suited for
- Pipeline Lowest Slow but continuous Very high Liquids and gases over fixed routes
Water (ocean, barge) Very low Slowest Moderate (weather, port delays) Bulk commodities, containerized international freight
Rail (carload, unit train) Low Slow to moderate Moderate Heavy, bulky, long-haul freight such as coal, grain, chemicals, autos
Intermodal (TOFC, COFC) Low to moderate Moderate Moderate to good Long-haul containers: rail line haul with truck pickup and delivery (drayage)
Truckload (TL) Moderate Fast High Full trailers moved directly from origin to destination
Less-than-truckload (LTL) Higher per pound than TL Moderate (terminal handling) Moderate Shipments of roughly 150 to 10,000 lb consolidated through terminals
- Parcel High per pound Fast High Small packages, e-commerce
- Air Highest Fastest High High-value, perishable, or urgent goods
Truckload notes:
A 53-ft dry van holds 26 standard 48 × 40 in pallets single-stacked.
Federal rules cap gross vehicle weight on the Interstate system at 80,000 lb, which typically leaves about 42,000–45,000 lb of payload.
Dense freight weighs out (hits the weight limit first) and light freight cubes out (fills the space first). Know which applies when planning loads.
Containers: ocean capacity is counted in TEUs (twenty-foot equivalent units); a 40-ft container is 2 TEU.
Air freight charges the greater of actual weight and dimensional weight . The common international (IATA) divisor is 6,000 cm³ per kg, about 166 in³ per lb.
2. LTL Pricing and the Deficit Weight Rule
LTL carriers price per hundredweight (cwt = 100 lb) . Rates depend on:
Freight class: under the National Motor Freight Classification there are 18 classes from 50 (dense, durable) to 500 (light, bulky, fragile), based on density, handling, stowability, and liability. Higher class means a higher rate.
Weight breaks: the rate per cwt falls at heavier breaks (for example 500, 1,000, 2,000, 5,000, and 10,000 lb).
Lane (origin and destination), plus minimum charges, fuel surcharges, and accessorial fees.
Deficit weight rule: a shipment may be billed at the next higher weight break, at that break's lower rate, when that is cheaper.
Example: The rate is $25.00/cwt for 5,000–9,999 lb and $20.00/cwt for 10,000 lb and over. An 8,500 lb shipment rated as is costs 85 × 25 = $ 2,125 85 \times 25 = \text{\textdollar}2{,}125 85 × 25 = $ 2 , 125 . Rated as 10,000 lb it costs 100 × 20 = $ 2,000 100 \times 20 = \text{\textdollar}2{,}000 100 × 20 = $ 2 , 000 , so the deficit weight rate applies and saves $125. The indifference weight is 10,000 × 20 / 25 = 8,000 10{,}000 \times 20/25 = 8{,}000 10 , 000 × 20/25 = 8 , 000 lb: any shipment between 8,000 and 9,999 lb should be billed at the 10,000 lb break.
3. Mode Selection by Total Logistics Cost
The cheapest freight rate is not always the cheapest mode. Goods in transit are inventory the company owns, and slower or less reliable modes need more safety stock.
Total annual cost = Freight + D × C × i × T 365 ⏟ in-transit inventory + safety stock and other effects \text{Total annual cost} = \text{Freight} + \underbrace{D \times C \times i \times \frac{T}{365}}_{\text{in-transit inventory}} + \text{safety stock and other effects} Total annual cost = Freight + in-transit inventory D × C × i × 365 T + safety stock and other effects
where D D D is annual units, C C C is unit value, i i i is the annual carrying rate, and T T T is transit days.
Example: 50,000 units per year, each worth $200, carrying rate 25% per year.
Mode Freight ($/unit) Transit days Annual freight In-transit inventory cost Total
Rail 6 12 $300,000 2,500,000 × 12 / 365 = $ 82,192 2{,}500{,}000 \times 12/365 = \text{\textdollar}82{,}192 2 , 500 , 000 × 12/365 = $ 82 , 192 $382,192
- Truck 9 4 $450,000 $27,397 $477,397
- Air 20 1 $1,000,000 $6,849 $1,006,849
Rail wins here. If the parts were worth $2,000 each, in-transit cost would be ten times larger. Rail would then cost 300,000 + 821,918 = $ 1,121,918 300{,}000 + 821{,}918 = \text{\textdollar}1{,}121{,}918 300 , 000 + 821 , 918 = $ 1 , 121 , 918 , against 450,000 + 273,973 = $ 723,973 450{,}000 + 273{,}973 = \text{\textdollar}723{,}973 450 , 000 + 273 , 973 = $ 723 , 973 for truck, and truck would win. High-value goods favor faster modes.
4. Distribution Network Options
- Strategy How it works When it fits
- Direct ship Plant or vendor ships straight to the customer Large orders that fill TL loads; low handling cost
- Intermediate storage Stock is held at regional DCs Short customer lead times; risk pooling at the DC
Cross docking Inbound loads are sorted and reloaded outbound within hours High, predictable volume; consolidation of many small inbound flows
- Transshipment / hub-and-spoke Flows pass through intermediate nodes Consolidating LTL into TL line hauls
- 5. The Transshipment Problem
A transshipment model extends the transportation problem by allowing flow through intermediate nodes. Let x i j x_{ij} x ij be the flow on arc ( i , j ) (i, j) ( i , j ) with unit cost c i j c_{ij} c ij :
min ∑ ( i , j ) c i j x i j \min \sum_{(i,j)} c_{ij} x_{ij} min ∑ ( i , j ) c ij x ij
subject to:
Supply nodes: ∑ j x i j − ∑ k x k i ≤ s i \sum_j x_{ij} - \sum_k x_{ki} \le s_i ∑ j x ij − ∑ k x ki ≤ s i (net flow out at most the supply)
Transshipment nodes: ∑ k x k i − ∑ j x i j = 0 \sum_k x_{ki} - \sum_j x_{ij} = 0 ∑ k x ki − ∑ j x ij = 0 (flow in equals flow out)
Demand nodes: ∑ k x k i − ∑ j x i j ≥ d i \sum_k x_{ki} - \sum_j x_{ij} \ge d_i ∑ k x ki − ∑ j x ij ≥ d i
x i j ≥ 0 x_{ij} \ge 0 x ij ≥ 0
It can be solved as an LP or converted to a transportation tableau by adding a buffer equal to total supply at each transshipment node.
Worked example: Plant P1 can ship 300 units and plant P2 200 units. Customers C1 and C2 each need 250. A cross-dock T is available. Unit costs:
- Arc P1→T P2→T T→C1 T→C2 P1→C1 P2→C2
- Cost ($) 4 6 5 4 12 9
Cheapest route for each plant–customer pair:
P1 to C1: via T, 4 + 5 = 9 4 + 5 = 9 4 + 5 = 9 (direct is 12).
P1 to C2: via T, 4 + 4 = 8 4 + 4 = 8 4 + 4 = 8 .
P2 to C1: via T, 6 + 5 = 11 6 + 5 = 11 6 + 5 = 11 .
P2 to C2: direct, 9 (via T it is 10).
P1's cost advantage over P2 is $2 at C1 ( 11 − 9 11 - 9 11 − 9 ) and $1 at C2 ( 9 − 8 9 - 8 9 − 8 ), so P1's limited supply goes first to C1.
P1 sends 250 to C1 via T: 250 × 9 = $ 2,250 250 \times 9 = \text{\textdollar}2{,}250 250 × 9 = $ 2 , 250 .
P1 sends its remaining 50 to C2 via T: 50 × 8 = $ 400 50 \times 8 = \text{\textdollar}400 50 × 8 = $ 400 .
P2 sends 200 to C2 directly: 200 × 9 = $ 1,800 200 \times 9 = \text{\textdollar}1{,}800 200 × 9 = $ 1 , 800 .
Minimum total cost = $4,450 , with 300 units flowing through the cross-dock. Flow balance at T is 300 in and 300 out.