Study guide

9.7 Manufacturing & Service Process Planning: Operation Selection, Sequencing, Route Sheets, Fixturing & Mistake Proofing

PE Industrial and Systems Exam

Track your progress as you read

Finished sections get a check mark.

1 Exam Overview, Strategy & Systems Foundations

1.1 PE Industrial Exam Format, Official Specification & Reference Handbook Strategy 1.2 System Analysis Tools, Process Definition, Requirements Engineering & QFD 1.3 Performance Measures: Output, Productivity, OEE, Cost & Environmental Sustainability 1.4 Process Types (Discrete, Continuous, Manufacturing, Service) & Value Analysis/Engineering

2 Optimization, Queueing, Simulation, Networks & Markov Chains

2.1 Linear Programming Formulation, Graphical Solutions & Sensitivity Analysis 2.2 Queueing Theory Models (M/M/1, M/M/s) & Little's Law Applications 2.3 Discrete-Event Simulation, Random Variates & Model Validation 2.4 Graph Theory & Network Models: Shortest Path, Minimal Spanning Tree & Maximum Flow 2.5 Markov Chains: Transition Matrices, Steady-State Probabilities & Absorbing States 2.6 Decision Trees, Expected Value & Bottleneck Analysis (Theory of Constraints)

3 Project Management & Planning

3.1 Project Scheduling with CPM and PERT: Critical Path, Float, Probability & Crashing 3.2 Project Planning & Control: Scope and WBS, Gantt Charts, Critical Chain (CCPM), Risk & Earned Value

4 Facility Layout, Space, Capacity & Material Handling

4.1 Systematic Layout Planning (SLP) & Activity Relationship (REL) Analysis 4.2 Workstation Design, Aisle Sizing & Space Requirements Planning 4.3 Capacity Analysis: Machine Requirements, Scrap Allowances & Personnel Requirements 4.4 Material Handling Equipment Selection, Unit Loads & Handling Principles

5 Site Location, Warehousing & Facility Economics

5.1 Facility Location Models: Center of Gravity & Minisum / Minimax Distance 5.2 Warehousing Systems, Storage Assignment & Order Picking Operations 5.3 Facility Life-Cycle Economics, Replacement Analysis & Rearrangement Costs

6 Demand Forecasting, Production Planning, MRP & JIT

6.1 Demand Forecasting Methods: Moving Averages, Exponential Smoothing & Error Metrics 6.2 Aggregate Planning Strategies & Master Production Scheduling (MPS) 6.3 Material Requirements Planning (MRP), Bill of Materials & Capacity Planning 6.4 Just-in-Time & Lean Production Planning: Pull Systems, Kanban Sizing, Heijunka & SMED

7 Inventory Systems, Scheduling, Logistics & Transportation Modes

7.1 Deterministic Inventory Control: Classical EOQ, EPQ & Quantity Discounts 7.2 Stochastic Inventory Management: Safety Stock, Continuous / Periodic Review & Newsvendor 7.3 Production Sequencing, Dispatching Rules & Johnson's Algorithm 7.4 Supply Chain Logistics, Transportation Simplex & Distribution Network Design 7.5 Transportation Modes, Freight Economics & the Transshipment Model

8 Engineering Economics, Break-Even Analysis & Costing Systems

8.1 Equivalence, Cash Flow Analysis & Discounted Cash Flow Metrics (PW, FW, EAC) 8.2 Rate of Return Analysis (IRR, Incremental IRR) & Benefit-Cost (B/C) Ratios 8.3 Asset Depreciation (MACRS, Straight-Line), Tax Effects & Replacement Decisions 8.4 Break-Even Analysis, Technical Capability Assessment & Costing Systems (Traditional, ABC & Standard Costs)

9 Methods Engineering, Work Measurement, Learning Curves, Line Balancing & Process Planning

9.1 Methods Analysis, Process Charting & Motion Study (Therbligs, 5S) 9.2 Worker–Machine (Man–Machine) Charts, Multiple Activity Analysis & Synchronous Servicing 9.3 Time Study Fundamentals, Performance Rating & Allowance Factors 9.4 Predetermined Motion Time Systems (PMTS, MTM, MOST) & Work Sampling 9.5 Learning Curves: Unit and Cumulative-Average Models, Learning Rates & Applications 9.6 Assembly Line Balancing, Precedence Constraints & Efficiency Heuristics 9.7 Manufacturing & Service Process Planning: Operation Selection, Sequencing, Route Sheets, Fixturing & Mistake Proofing

10 Ergonomics, Human Capacity, Occupational Safety & DART Rates

10.1 Anthropometry, Percentile Design, Workstation Ergonomics & Link Analysis 10.2 Industrial Biomechanics, the NIOSH Lifting Equation & Lifting Aids 10.3 Limits of Human Capacity & Risk-Factor Tools: Work Physiology, Strength, Range of Motion, Vision, RULA & Slip Resistance 10.4 Environmental Ergonomics (Noise, Heat, Illumination), Human-Machine Systems & OSHA Safety 10.5 Safety Codes, Standards & Voluntary Guidelines (OSHA, ANSI, NIOSH, MIL-STD) and DART Rate Calculations

11 Statistical Process Control & Process Capability

11.1 Statistical Process Control for Variables (X-bar/R and X-bar/s Charts) 11.2 Statistical Process Control for Attributes (p, np, c, and u Charts) 11.3 Process Capability Indices (Cp, Cpk, Cpm, Pp, Ppk) & Sigma Levels

12 Design of Experiments, Acceptance Sampling & Quality Systems

12.1 Design of Experiments: 2^k Factorials, ANOVA & Taguchi Robust Design 12.2 Acceptance Sampling: OC Curves, AQL, LTPD, AOQL, Z1.4/MIL-STD-105E & Dodge-Romig 12.3 Quality Systems (Deming, TQM, ISO 9000, Benchmarking), Root Cause Analysis & DMAIC

13 Reliability Engineering & Maintenance Systems

13.1 Reliability Modeling, Failure Rates (lambda) & Life Distributions (Exponential, Weibull) 13.2 System Reliability Architecture: Series, Parallel, k-out-of-n & Redundancy 13.3 Equipment Maintenance Engineering, Availability (A), MTBF/MTTR & RCM

9.7 Manufacturing & Service Process Planning: Operation Selection, Sequencing, Route Sheets, Fixturing & Mistake Proofing

Key Takeaways Explain This Topic AI

Process planning selects operations and equipment, sequences them, specifies tooling, fixturing, and parameters, and documents the result in route sheets, operation sheets, and work instructions.

Sequencing rules include establishing datum surfaces first, roughing before finishing, completing features before heat treatment that must then be ground, and placing inspection after critical operations.

The 3-2-1 locating principle restrains a prismatic part's six degrees of freedom with three locators on the primary datum, two on the secondary, and one on the tertiary, with clamps pushing the part against the locators.

Variant computer-aided process planning retrieves and edits a standard plan for a part family coded by group technology, while generative CAPP builds a new plan from decision logic.

A service blueprint maps customer actions, onstage and backstage employee actions, and support processes, separated by the lines of interaction and visibility, and marks fail points for mistake proofing.

Last updated: October 2026

9.7 Manufacturing & Service Process Planning

Process planning turns a product design (drawings, tolerances, materials) or a service concept into a defined sequence of work that operators can execute repeatably. The NCEES specification lists the elements: selection of operations, sequence, instructions, tooling and fixturing, and mistake proofing .

1. Steps in Manufacturing Process Planning

Interpret the design: geometry, critical dimensions, tolerances and geometric tolerances (GD&T), surface finish, material, heat treatment, and annual volume.

Select processes: choose operations that can meet each requirement, such as casting or forging for the form, turning or milling for features, and grinding for tight tolerance and fine finish.

Select equipment: match machine capability (size, power, accuracy, C p k C_{pk} C p k ​ ) and capacity to the volume.

Sequence the operations (Section 2).

Specify tooling, fixturing, and parameters: cutting tools, speeds and feeds, gauges, and fixtures.

Estimate times: setup and run standards from time study, PMTS, or standard data.

Document: route sheet, operation sheets, work instructions, and the control plan.

Selecting Processes

Each process has a range of achievable tolerance, finish, and economical volume. Grinding, for example, holds much tighter tolerances and finer finishes than turning but removes material slowly, so it is normally reserved for finishing. Choose the cheapest process sequence whose capability ( C p k C_{pk} C p k ​ ) meets the specification with margin. A process that can only just hold a tolerance will generate scrap and inspection cost.

2. Sequencing Rules

Operation order is driven by precedence logic and datum logic :

Establish datums first. Machine the surfaces that later operations locate from, so every later feature is referenced to an accurate base.

Rough before finish. Heavy cuts cause heat and stress, which distort finished surfaces.

Complete soft-state features before heat treatment. Drill, tap, and mill keyways while the part is soft. After hardening, only grinding or other hard-finishing remains.

Deburr after the operations that create burrs, and before assembly or plating.

Inspect after critical or costly operations, so defects are not carried into expensive downstream work.

Minimize setups and handling. Combine operations that use the same setup, which also improves feature-to-feature accuracy.

Example Route Sheet: Hardened Drive Shaft

  • Op Description Work center Tooling or fixture Notes
  • 10 Saw bar stock to length Saw Length stop Raw material: 4140 bar
  • 20 Face both ends, center drill Lathe Chuck Creates the center-hole datums

30 Rough and finish turn diameters, leaving grind stock on journals CNC lathe Between centers Turned journals left oversize

  • 40 Mill keyway Vertical mill V-block fixture with end stop Done while soft
  • 45 Deburr Bench — Before heat treatment
  • 50 Harden and temper Heat treat Rack Hardness specified on drawing
  • 60 Grind bearing journals Cylindrical grinder Between centers Final size and finish
  • 70 Final inspection Quality lab Gauges, CMM Critical-to-quality checks

A route sheet lists the operations and work centers in order. An operation sheet expands one operation with setup, tools, parameters, and inspection. Work instructions show the operator, step by step and with pictures, how to perform it, highlighting key points and quality checks.

3. Tooling and Fixturing

A fixture locates and holds the workpiece. A jig also guides the tool, such as a drill bushing. Both must locate the part accurately and repeatably, hold it rigidly against cutting forces, load quickly, and be mistake-proof.

The 3-2-1 Locating Principle

A rigid prismatic part has six degrees of freedom : translation along X, Y, and Z and rotation about each axis. The 3-2-1 principle restrains all six with the minimum number of locators:

3 locators on the primary datum surface (the largest face) define a plane, restraining Z translation and rotation about X and Y.

2 locators on the secondary datum restrain the next translation and the remaining rotation.

1 locator on the tertiary datum restrains the last translation.

Clamps then push the part firmly against the locators, never against a clamp on the opposite side of a locator, and clamping forces should act through the locators so the part does not distort. Locate on the datum features named on the drawing so that the measured features relate to the same references the designer used. Cylindrical parts are commonly located with V-blocks, centers, or collets.

4. Computer-Aided Process Planning (CAPP)

Variant (retrieval) CAPP: parts are coded into families with a group technology classification code. A standard plan exists for each family, and a new part retrieves its family plan, which the planner edits.

Generative CAPP: decision logic and process databases build a new plan from part features without starting from a stored plan.

Variant systems are easier to set up; generative systems handle novel parts but need extensive rules and data.

5. Mistake Proofing in Process Planning

Build poka-yoke devices into the plan rather than relying on inspection:

Fixtures that accept the part in only the correct orientation, using asymmetric pins.

Sensors that confirm the part is seated before the cycle can start.

Kits and counters that stop the cycle if a fastener is missing.

Source inspection: checking conditions that cause defects, such as the right tool or a seated part, before the operation instead of inspecting the result afterward.

The quality chapter covers contact, fixed-value, and motion-step methods and control versus warning devices.

6. Service Process Planning: The Service Blueprint

G. Lynn Shostack introduced the service blueprint in 1984. It is a flowchart in horizontal bands:

Physical evidence: what the customer sees, such as the lobby, website, or invoice.

Customer actions: each step the customer takes.

Onstage (visible) contact employee actions , separated from customer actions by the line of interaction .

Backstage (invisible) contact employee actions , below the line of visibility .

Support processes , below the line of internal interaction .

The planner marks fail points (steps likely to go wrong), wait points , and the time standard for each step. Fail points get service poka-yoke, such as checklists, reminder calls, or swipe cards that verify identity.

Example: At an equipment-rental counter, a fail point is "wrong equipment pulled from the yard" (backstage). A barcode scan matching the reservation removes it. Another is "customer waits for paperwork" (onstage), addressed by pre-filling the contract online before arrival.