Study guide

13.1 Mechanism Kinematics, Linkages, Cams & Simple Machines

PE Mechanical: Machine Design and Materials Exam

Track your progress as you read

Finished sections get a check mark.

1 Chapter 1: Basic Engineering Practice: Drawings, Economics & Design Methodology

1.1 Engineering Terms, Symbols, Drawing Interpretation & Conventions 1.2 Project Management & Engineering Economics 1.3 Design Methodology, Risk Assessment & Safety

2 Chapter 2: Physical & Mechanical Properties of Engineering Materials

2.1 Stress-Strain Relationships & Fundamental Mechanical Properties 2.2 Physical Properties, Temperature Effects, Hardness, Impact Toughness & Creep

3 Chapter 3: Mechanics of Materials: Fundamental Loadings & Deflections

3.1 Axial Loading, Normal Stress & Statically Indeterminate Members 3.2 Direct Shear, Bearing & Transverse Shear in Beams 3.3 Torsion of Shafts, Power Transmission & Thin-Walled Tubes 3.4 Beam Bending Stresses & Deflection Analysis

4 Chapter 4: Mechanics of Materials: Stability, Multiaxial Stress & Thermal Effects

4.1 Column Buckling & Elastic/Inelastic Instability 4.2 Combined Loading, Principal Stresses & Mohr's Circle 4.3 Thermal Stresses & Interference Stresses

5 Chapter 5: Failure Theories: Static Yielding & Fracture Mechanics

5.1 Static Failure Theories for Ductile Materials: von Mises & Tresca 5.2 Static Failure Theories for Brittle Materials & Fracture Mechanics

6 Chapter 6: Fatigue Analysis & Dynamic Failure

6.1 High-Cycle Fatigue, S-N Curves & Marin Modifying Factors 6.2 Fluctuating Stresses, Failure Criteria & Cumulative Damage

7 Chapter 7: Mechanical Attachments: Fasteners & Bolted Joints

7.1 Threaded Fasteners, Proof Strength & Preload Mechanics 7.2 Bolted Joint Stiffness, External Loading & Separation 7.3 Non-Threaded Fasteners: Keys, Pins, Clevises, Retaining Rings, Rivets, Lugs & Anchors

8 Chapter 8: Mechanical Attachments: Permanent Joints & Bonding

8.1 Welded Joints & Weld Group Stress Analysis 8.2 Brazing, Soldering & Structural Adhesive Bonding

9 Chapter 9: Power Transmission: Shafts & Gearing

9.1 Transmission Shaft Design, Critical Speeds & Deflection 9.2 Spur Gears: Geometry, Kinematics & AGMA Stress Equations 9.3 Helical, Bevel & Worm Gearing

10 Chapter 10: Power Transmission: Bearings, Flexible Drives, Friction Devices & Prime Movers

10.1 Rolling-Element Bearings & L10 Life Calculations 10.2 Hydrodynamic Journal Bearings & Lubrication Regimes 10.3 Belts, Roller Chains & Flexible Drives 10.4 Clutches, Brakes & Power Screws 10.5 Electric Motors, Engines & Flywheels

11 Chapter 11: Mechanical Components: Pressure Vessels & Structural Systems

11.1 Pressure Vessels & Piping: Thin and Thick Walls, ASME VIII and B31 11.2 Mechanical Springs: Helical, Belleville & Leaf Springs 11.3 Structural Trusses, Rigid Frames & Energy Methods

12 Chapter 12: Mechanical Dynamics, Vibrations & Fluid Power

12.1 Single-Degree-of-Freedom Vibrations & Resonance 12.2 Vibration Isolation, Multi-DOF Systems & Transmissibility 12.3 Fluid Power Systems: Hydraulics & Pneumatics

13 Chapter 13: Kinematics, Mechatronics & Control Systems

13.1 Mechanism Kinematics, Linkages, Cams & Simple Machines 13.2 Basic Mechatronics, Sensors & Closed-Loop Controls

14 Chapter 14: Supportive Knowledge: Fits, Tolerances & Manufacturing Methods

14.1 Limits, Fits & Geometric Dimensioning & Tolerancing (GD&T) 14.2 Manufacturing Methods, Machinability, Heat Treatment & Assembly

15 Chapter 15: Supportive Knowledge: Codes, Computation, Testing & Corrosion

15.1 Engineering Codes & Standards 15.2 Computational Methods: FEA & Numerical Analysis 15.3 Instrumentation, Testing, Inspection & Quality 15.4 Chemical Processes: Corrosion, Oxidation & Embrittlement

13.1 Mechanism Kinematics, Linkages, Cams & Simple Machines

Key Takeaways Explain This Topic AI

Gruebler's (Kutzbach) mobility criterion M = 3 ( n − 1 ) − 2 j 1 − j 2 M = 3(n-1) - 2 j_1 - j_2 M = 3 ( n − 1 ) − 2 j 1 ​ − j 2 ​ determines the degrees of freedom for planar mechanisms, where M = 1 M = 1 M = 1 denotes a constrained single-input mechanism, M = 0 M = 0 M = 0 is a statically determinate structure, and M < 0 M < 0 M < 0 is a statically indeterminate pre-stressed structure.

Grashof's condition s + l ≤ p + q s + l \le p + q s + l ≤ p + q governs whether continuous relative rotation is possible in a four-bar linkage; if satisfied, fixing the link adjacent to the shortest link yields a crank-rocker, fixing the shortest link yields a double-crank (drag link), and fixing the coupler opposite the shortest yields a double-rocker.

The transmission angle μ \mu μ between the coupler and output follower should be maintained within 45 ∘ ≤ μ ≤ 135 ∘ 45^\circ \le \mu \le 135^\circ 4 5 ∘ ≤ μ ≤ 13 5 ∘ throughout the operating cycle to prevent high joint friction, excessive bearing side-loads, and transmission lockup.

By the Kennedy-Aronhold theorem, any three bodies in relative planar motion share three instant centers of velocity that lie on a single straight line, allowing direct determination of angular velocity ratios ω j ω i = r I i j / I 1 i r I i j / I 1 j \frac{\omega_j}{\omega_i} = \frac{r_{I_{ij}/I_{1i}}}{r_{I_{ij}/I_{1j}}} ω i ​ ω j ​ ​ = r I ij ​ / I 1 j ​ ​ r I ij ​ / I 1 i ​ ​ ​ without solving closed-loop vector equations.

In a toggle mechanism, two connecting links approach collinearity ( 180 ∘ 180^\circ 18 0 ∘ or 0 ∘ 0^\circ 0 ∘ ), causing output velocity to approach zero for a finite input velocity and resulting in theoretical mechanical advantage M A = F o u t F i n = v i n v o u t → ∞ MA = \frac{F_{out}}{F_{in}} = \frac{v_{in}}{v_{out}} \to \infty M A = F in ​ F o u t ​ ​ = v o u t ​ v in ​ ​ → ∞ .

Last updated: October 2026

13.1 Mechanism Kinematics, Linkages & Instant Centers

Kinematics is the study of geometry in motion—analyzing position, displacement, velocity, and acceleration of machine components without regard to the forces causing the motion. In machine design and mechanical automation, kinematic synthesis and analysis ensure that linkages, actuators, and transmissions guide tooling through required paths, produce necessary mechanical advantage, and minimize peak inertial accelerations. Understanding mechanism mobility, four-bar linkage dynamics, slider-crank behavior, and instant centers provides the analytical foundation required for machine design problems on the PE exam.

Planar Mechanism Mobility & Degrees of Freedom

The mobility (or degrees of freedom, M M M ) of a mechanical linkage represents the number of independent input parameters (typically position coordinates or actuator inputs) required to completely define the physical configuration and spatial orientation of every link in the mechanism.

Gruebler's (Kutzbach) Criterion for Planar Mechanisms

In an unconstrained planar system, an isolated rigid link possesses 3 independent degrees of freedom: translation in x x x , translation in y y y , and rotation θ \theta θ about the z z z -axis. When n n n rigid links are assembled into a mechanism, one link is selected as the stationary ground frame (leaving n − 1 n-1 n − 1 moving links with 3 ( n − 1 ) 3(n-1) 3 ( n − 1 ) unconstrained degrees of freedom). Connecting these links with kinematic joints removes degrees of freedom.

The degree of freedom of a planar mechanism is evaluated using Gruebler's criterion (also referred to as the Kutzbach mobility equation): M = 3 ( n − 1 ) − 2 j 1 − j 2 M = 3(n - 1) - 2 j_1 - j_2 M = 3 ( n − 1 ) − 2 j 1 ​ − j 2 ​

where:

n n n = total number of links in the mechanism, including the fixed base/ground frame ( n ≥ 2 n \ge 2 n ≥ 2 ).

j 1 j_1 j 1 ​ = total number of single-degree-of-freedom joints (lower pairs). Each j 1 j_1 j 1 ​ joint removes 2 degrees of relative motion, permitting 1 degree of freedom.

j 2 j_2 j 2 ​ = total number of two-degree-of-freedom joints (higher pairs). Each j 2 j_2 j 2 ​ joint removes 1 degree of relative motion, permitting 2 degrees of freedom. Joint Classifications

  • +-------------------------------------------------------------------------+
  • | Joint Type | Allowed Relative Motion | DOF Removed | Symbol |
  • |------------------------+-------------------------+-------------+--------|
  • | Revolute (Pin) | 1-DOF Rotation | 2 DOF | j_1 |
  • | Prismatic (Slider) | 1-DOF Translation | 2 DOF | j_1 |
  • | Cam-Follower (Roll/Slip)| Rotation + Tangent Slip | 1 DOF | j_2 |
  • | Gear Tooth Mesh | Rolling + Sliding | 1 DOF | j_2 |
  • | Pin-in-Slot | Sliding + Rotation | 1 DOF | j_2 |
  • +-------------------------------------------------------------------------+
  • Physical Significance of Mobility ( M M M )

M = 1 M = 1 M = 1 (Constrained Mechanism) : The system possesses exactly one degree of freedom. A single driver (e.g., an electric motor rotating a crank at ω \omega ω or a hydraulic cylinder extending a rod at v v v ) produces determinate, repeatable motion in all other links.

M > 1 M > 1 M > 1 (Multi-Degree-of-Freedom Mechanism) : The mechanism requires M M M independent actuators to control its configuration (e.g., a two-link robotic arm with M = 2 M = 2 M = 2 requiring two servo actuators).

M = 0 M = 0 M = 0 (Statically Determinate Structure) : The links form a rigid frame or truss incapable of gross kinematic motion without elastic deformation.

M < 0 M < 0 M < 0 (Statically Indeterminate Structure) : The system contains redundant constraints (pre-stressed structure). Assembling the links requires elastic deformation or high manufacturing tolerances.

Joint Multiplicity and Idle Degrees of Freedom

Two practical caveats frequently appear on kinematic exams:

Multiple Pin Joints : When k k k links are pinned together at the same physical pivot point, the junction is counted as ( k − 1 ) (k - 1) ( k − 1 ) separate 1-DOF revolute joints ( j 1 j_1 j 1 ​ ). For example, three links pinned together at a single hinge count as 3 − 1 = 2 3 - 1 = 2 3 − 1 = 2 pin joints.

Idle (Redundant) Degrees of Freedom ( f idle f_{\text{idle}} f idle ​ ) : Certain mechanisms incorporate components that move without altering the primary kinematic relationship between input and output. A standard cam mechanism with a rotating roller follower possesses an idle rotational degree of freedom of the roller about its own axis. The modified mobility equation is: M = 3 ( n − 1 ) − 2 j 1 − j 2 − f idle M = 3(n - 1) - 2 j_1 - j_2 - f_{\text{idle}} M = 3 ( n − 1 ) − 2 j 1 ​ − j 2 ​ − f idle ​

Four-Bar Linkages & Grashof's Condition

The planar four-bar linkage is the fundamental building block of kinematic machinery. It consists of four rigid links connected by four revolute joints:

  • Link 1: Fixed base frame (ground)
  • Link 2: Input link (driver / crank)
  • Link 3: Coupler link (connecting rod)
  • Link 4: Output link (rocker / follower) Four-Bar Linkage Diagram
  • Coupler (Link 3)
  • A +-----------------+ B
  • / \
  • Input (Link 2) / \ Output (Link 4)
  • / \
  • O_2 +-----------------------+ O_4
  • Ground (Link 1)
  • Grashof's Criterion

Grashof's law predicts the rotational behavior of a planar four-bar linkage based entirely on the lengths of its four links:

  • Let s s s = length of the shortest link
  • Let l l l = length of the longest link
  • Let p , q p, q p , q = lengths of the two intermediate links
  • A linkage is Grashof if: s + l ≤ p + q s + l \le p + q s + l ≤ p + q

If this inequality is satisfied, at least one link can execute a continuous 360 ∘ 360^\circ 36 0 ∘ rotation relative to the other three links.

Classifications of Grashof Linkages ( s + l < p + q s + l < p + q s + l < p + q )

Depending on which link is chosen as the fixed ground frame (inversion), three distinct mechanisms arise:

Crank-Rocker Mechanism :

Ground link is adjacent to the shortest link s s s .

The shortest link s s s serves as the input crank, rotating continuously through 360 ∘ 360^\circ 36 0 ∘ .

The opposite grounded link oscillates back and forth over a finite angular stroke as an output rocker.

Widely utilized in windshield wipers, sewing machine needle drives, and reciprocating conveyors.

Double-Crank Mechanism (Drag-Link) :

The shortest link s s s is the stationary ground link.

Both links connected to ground (links 2 and 4) are capable of complete 360 ∘ 360^\circ 36 0 ∘ continuous rotation.

When driven at a constant input angular velocity, the output crank rotates with a cyclically varying angular velocity, functioning as a quick-return motion generator.

Double-Rocker Mechanism :

The link opposite the shortest link s s s is chosen as the ground link (i.e., shortest link s s s is the coupler).

Both grounded links rock back and forth through bounded angular ranges; neither grounded link can rotate fully through 360 ∘ 360^\circ 36 0 ∘ , though the floating coupler executes full rotations.

Non-Grashof Linkages ( s + l > p + q s + l > p + q s + l > p + q )

If s + l > p + q s + l > p + q s + l > p + q , the linkage is Non-Grashof (Triple-Rocker). No link can make a complete 360 ∘ 360^\circ 36 0 ∘ revolution relative to any other link. All three moving links oscillate between limit stops regardless of which link is grounded.

Change-Point Mechanisms ( s + l = p + q s + l = p + q s + l = p + q )

When s + l = p + q s + l = p + q s + l = p + q , the linkage is a change-point mechanism (e.g., a parallelogram or deltoid linkage). At the collinear positions (where all four links become parallel or lie on a single straight line), the output motion becomes indeterminate. The mechanism can "toggle" or fold back on itself unless guided through the change point by flywheel inertia or duplicate out-of-phase links (such as steam locomotive side-rods).

Transmission Angle ( μ \mu μ )

The transmission angle μ \mu μ is defined as the acute angle between the coupler link (link 3) and the output rocker link (link 4): F_coupler

  • Link 3 ---------> * (Joint B)
  • / \
  • / \ Transmission Angle mu
  • / \
  • / \ Link 4 (Output Rocker)
  • v v
  • F_axial F_transverse = F_coupler * sin(mu)

The force transmitted from the coupler drives the output rocker through the transverse component F transverse = F coupler sin ⁡ μ F_{\text{transverse}} = F_{\text{coupler}} \sin\mu F transverse ​ = F coupler ​ sin μ , while the axial component F axial = F coupler cos ⁡ μ F_{\text{axial}} = F_{\text{coupler}} \cos\mu F axial ​ = F coupler ​ cos μ generates bearing reaction loads on pivot O 4 O_4 O 4 ​ .

Ideal Condition : μ = 90 ∘ \mu = 90^\circ μ = 9 0 ∘ (maximum torque transmission, zero axial bearing load).

Design Criterion : For smooth, reliable operation without mechanical locking or excessive wear, the transmission angle throughout the entire cycle should satisfy: 45 ∘ ≤ μ ≤ 135 ∘ ( ∣ 90 ∘ − μ ∣ ≤ 45 ∘ ) 45^\circ \le \mu \le 135^\circ \quad (|90^\circ - \mu| \le 45^\circ) 4 5 ∘ ≤ μ ≤ 13 5 ∘ ( ∣9 0 ∘ − μ ∣ ≤ 4 5 ∘ )

If μ < 45 ∘ \mu < 45^\circ μ < 4 5 ∘ or μ > 135 ∘ \mu > 135^\circ μ > 13 5 ∘ , force transmission efficiency drops significantly, mechanical deflection increases, and the linkage risks binding or jamming.

Using the law of cosines, the extreme transmission angles occur when the input crank is collinear with the fixed ground frame:

Minimum Transmission Angle μ min ⁡ \mu_{\min} μ m i n ​ (at θ 2 = 0 ∘ \theta_2 = 0^\circ θ 2 ​ = 0 ∘ , inner dead center): cos ⁡ μ min ⁡ = L 3 2 + L 4 2 − ( L 1 − L 2 ) 2 2 L 3 L 4 \cos\mu_{\min} = \frac{L_3^2 + L_4^2 - (L_1 - L_2)^2}{2 L_3 L_4} cos μ m i n ​ = 2 L 3 ​ L 4 ​ L 3 2 ​ + L 4 2 ​ − ( L 1 ​ − L 2 ​ ) 2 ​

Maximum Transmission Angle μ max ⁡ \mu_{\max} μ m a x ​ (at θ 2 = 180 ∘ \theta_2 = 180^\circ θ 2 ​ = 18 0 ∘ , outer dead center): cos ⁡ μ max ⁡ = L 3 2 + L 4 2 − ( L 1 + L 2 ) 2 2 L 3 L 4 \cos\mu_{\max} = \frac{L_3^2 + L_4^2 - (L_1 + L_2)^2}{2 L_3 L_4} cos μ m a x ​ = 2 L 3 ​ L 4 ​ L 3 2 ​ + L 4 2 ​ − ( L 1 ​ + L 2 ​ ) 2 ​

Slider-Crank Mechanism Kinematics

The slider-crank mechanism converts rotational motion into reciprocating linear motion (or vice versa), serving as the foundational kinematics for internal combustion engines, reciprocating compressors, and stamping presses. Slider-Crank Kinematics

  • Coupler (Length l)
  • A +-------------------+
  • / \ Piston (Slider)
  • Crank (r) / +-------+
  • / theta | P (x) | ===>
  • O +-------------------------+-------+
  • Stroke Axis
  • Analytical Displacement, Velocity & Acceleration

Let:

  • r r r = crank radius (length of link 2)
  • l l l = connecting rod length (length of link 3)

λ = r l \lambda = \frac{r}{l} λ = l r ​ = crank-to-rod ratio (typically 0.20 ≤ λ ≤ 0.30 0.20 \le \lambda \le 0.30 0.20 ≤ λ ≤ 0.30 )

  • θ = ω t \theta = \omega t θ = ω t = crank angle measured from Top Dead Center (TDC)
  • ω \omega ω = constant crank angular velocity (rad/s)

Measuring slider displacement x x x from the crank center O O O toward the slider: x ( θ ) = r cos ⁡ θ + l 2 − r 2 sin ⁡ 2 θ = r cos ⁡ θ + l 1 − λ 2 sin ⁡ 2 θ x(\theta) = r \cos\theta + \sqrt{l^2 - r^2 \sin^2\theta} = r \cos\theta + l \sqrt{1 - \lambda^2 \sin^2\theta} x ( θ ) = r cos θ + l 2 − r 2 sin 2 θ ​ = r cos θ + l 1 − λ 2 sin 2 θ ​

Measuring piston displacement s s s from Top Dead Center ( s = 0 s = 0 s = 0 when θ = 0 \theta = 0 θ = 0 ): s ( θ ) = ( r + l ) − x ( θ ) = r ( 1 − cos ⁡ θ ) + l ( 1 − 1 − λ 2 sin ⁡ 2 θ ) s(\theta) = (r + l) - x(\theta) = r(1 - \cos\theta) + l \left(1 - \sqrt{1 - \lambda^2 \sin^2\theta}\right) s ( θ ) = ( r + l ) − x ( θ ) = r ( 1 − cos θ ) + l ( 1 − 1 − λ 2 sin 2 θ ​ )

Applying the binomial series approximation 1 − u ≈ 1 − 1 2 u \sqrt{1 - u} \approx 1 - \frac{1}{2}u 1 − u ​ ≈ 1 − 2 1 ​ u (valid because λ 2 ≪ 1 \lambda^2 \ll 1 λ 2 ≪ 1 ): 1 − λ 2 sin ⁡ 2 θ ≈ 1 − λ 2 2 sin ⁡ 2 θ = 1 − λ 2 4 ( 1 − cos ⁡ 2 θ ) \sqrt{1 - \lambda^2 \sin^2\theta} \approx 1 - \frac{\lambda^2}{2} \sin^2\theta = 1 - \frac{\lambda^2}{4}(1 - \cos 2\theta) 1 − λ 2 sin 2 θ ​ ≈ 1 − 2 λ 2 ​ sin 2 θ = 1 − 4 λ 2 ​ ( 1 − cos 2 θ )

This yields the standard engineering approximations widely applied in engine kinematics:

Piston Displacement ( s s s from TDC): s ≈ r [ ( 1 − cos ⁡ θ ) + r 4 l ( 1 − cos ⁡ 2 θ ) ] s \approx r \left[ (1 - \cos\theta) + \frac{r}{4l} (1 - \cos 2\theta) \right] s ≈ r [ ( 1 − cos θ ) + 4 l r ​ ( 1 − cos 2 θ ) ]

Piston Velocity ( v = s ˙ v = \dot{s} v = s ˙ ): v = r ω ( sin ⁡ θ + r 2 l sin ⁡ 2 θ ) v = r \omega \left( \sin\theta + \frac{r}{2l} \sin 2\theta \right) v = r ω ( sin θ + 2 l r ​ sin 2 θ )

Piston Acceleration ( a = v ˙ = s ¨ a = \dot{v} = \ddot{s} a = v ˙ = s ¨ ): a = r ω 2 ( cos ⁡ θ + r l cos ⁡ 2 θ ) a = r \omega^2 \left( \cos\theta + \frac{r}{l} \cos 2\theta \right) a = r ω 2 ( cos θ + l r ​ cos 2 θ )

Primary vs. Secondary Inertia Dynamics

Primary Term ( cos ⁡ θ \cos\theta cos θ ): Oscillates at engine running frequency ω \omega ω . Represents pure harmonic motion of an infinitely long connecting rod ( l / r → ∞ l/r \to \infty l / r → ∞ ).

Secondary Term ( r l cos ⁡ 2 θ \frac{r}{l}\cos 2\theta l r ​ cos 2 θ ): Oscillates at twice engine frequency ( 2 ω 2\omega 2 ω ). Arises from the angular obliquity of the connecting rod. It causes the piston to travel faster and experience higher accelerations during the top half of the stroke than the bottom half.

At Top Dead Center ( θ = 0 ∘ \theta = 0^\circ θ = 0 ∘ ): a TDC = r ω 2 ( 1 + r l ) a_{\text{TDC}} = r \omega^2 \left(1 + \frac{r}{l}\right) a TDC ​ = r ω 2 ( 1 + l r ​ )

At Bottom Dead Center ( θ = 180 ∘ \theta = 180^\circ θ = 18 0 ∘ ): a BDC = − r ω 2 ( 1 − r l ) a_{\text{BDC}} = -r \omega^2 \left(1 - \frac{r}{l}\right) a BDC ​ = − r ω 2 ( 1 − l r ​ )

Instant Centers of Velocity & Kennedy's Theorem

An instant center of velocity (IC) between two bodies in planar motion is a point common to both bodies (or their rigid extensions) having identical instantaneous linear velocity vectors in both magnitude and direction.

Notation and Number of Instant Centers

The instant center between body i i i and body j j j is denoted I i j I_{ij} I ij ​ (or I C ( i , j ) IC(i,j) I C ( i , j ) ). Because I i j ≡ I j i I_{ij} \equiv I_{ji} I ij ​ ≡ I ji ​ , the total number of instant centers N N N for a mechanism containing n n n links is the number of 2-link combinations: N = n ( n − 1 ) 2 N = \frac{n(n - 1)}{2} N = 2 n ( n − 1 ) ​

For a standard 4-bar linkage or slider-crank ( n = 4 n = 4 n = 4 links): N = 4 ( 4 − 1 ) 2 = 6 instant centers: I 12 , I 23 , I 34 , I 14 , I 13 , I 24 N = \frac{4(4 - 1)}{2} = 6 \text{ instant centers: } I_{12}, I_{23}, I_{34}, I_{14}, I_{13}, I_{24} N = 2 4 ( 4 − 1 ) ​ = 6 instant centers: I 12 ​ , I 23 ​ , I 34 ​ , I 14 ​ , I 13 ​ , I 24 ​

Locating Primary Instant Centers by Inspection

Revolute (Pin) Joint : The instant center I i j I_{ij} I ij ​ between two pinned links is located directly at the physical center of the pin.

Prismatic (Slider) Joint : The instant center I i j I_{ij} I ij ​ between a slider and its straight guide lies at infinity ( ∞ \infty ∞ ) along a line perpendicular to the sliding axis.

Pure Rolling Contact : The instant center I i j I_{ij} I ij ​ between two bodies rolling without slip is located at the instantaneous point of contact.

Rolling with Sliding : The instant center lies along the common normal at the point of contact.

Kennedy-Aronhold Theorem of Three Centers

Kennedy-Aronhold Theorem :

The three instant centers associated with any three bodies undergoing relative planar motion ( I i j , I j k , and I i k I_{ij}, I_{jk}, \text{and } I_{ik} I ij ​ , I jk ​ , and I ik ​ ) must lie on a single straight line.

This theorem provides the geometric tool to find secondary instant centers without calculations:

To find I 13 I_{13} I 13 ​ for links 1, 2, and 3: I 13 I_{13} I 13 ​ must lie on the line passing through I 12 I_{12} I 12 ​ and I 23 I_{23} I 23 ​ . Simultaneously, considering links 1, 4, and 3, I 13 I_{13} I 13 ​ must lie on the line passing through I 14 I_{14} I 14 ​ and I 34 I_{34} I 34 ​ . The intersection of line ( I 12 − I 23 ) (I_{12}-I_{23}) ( I 12 ​ − I 23 ​ ) and line ( I 14 − I 34 ) (I_{14}-I_{34}) ( I 14 ​ − I 34 ​ ) locates I 13 I_{13} I 13 ​ .

To find I 24 I_{24} I 24 ​ : I 24 I_{24} I 24 ​ lies at the intersection of line ( I 12 − I 14 ) (I_{12}-I_{14}) ( I 12 ​ − I 14 ​ ) (the ground link line) and line ( I 23 − I 34 ) (I_{23}-I_{34}) ( I 23 ​ − I 34 ​ ) (the coupler link line). Kennedy's Circle Diagram Method

  • 1 (Ground)
  • / \
  • / \
  • (Link 2) 2 --- 4 (Link 4)
  • \ /
  • \ /
  • 3 (Coupler)
  • Intersection of chords (1-2-3) and (1-4-3) locates instant center I_13
  • Intersection of chords (2-1-4) and (2-3-4) locates instant center I_24
  • Velocity Analysis Using Instant Centers

Instant centers allow direct calculation of velocities without setting up trigonometric loop-closure matrices:

Linear Velocity of Instant Center I i j I_{ij} I ij ​ :

Because I i j I_{ij} I ij ​ is common to body i i i (rotating about ground pivot I 1 i I_{1i} I 1 i ​ ) and body j j j (rotating about ground pivot I 1 j I_{1j} I 1 j ​ ): v I i j = ω i ⋅ r I i j / I 1 i = ω j ⋅ r I i j / I 1 j v_{I_{ij}} = \omega_i \cdot r_{I_{ij}/I_{1i}} = \omega_j \cdot r_{I_{ij}/I_{1j}} v I ij ​ ​ = ω i ​ ⋅ r I ij ​ / I 1 i ​ ​ = ω j ​ ⋅ r I ij ​ / I 1 j ​ ​

Angular Velocity Ratio Theorem :

Rearranging the common velocity relationship gives the angular velocity ratio between any two links directly from the geometric distances to their mutual instant center: ω j ω i = r I i j / I 1 i r I i j / I 1 j \frac{\omega_j}{\omega_i} = \frac{r_{I_{ij}/I_{1i}}}{r_{I_{ij}/I_{1j}}} ω i ​ ω j ​ ​ = r I ij ​ / I 1 j ​ ​ r I ij ​ / I 1 i ​ ​ ​

For a four-bar linkage, the output rocker velocity ω 4 \omega_4 ω 4 ​ relative to input crank velocity ω 2 \omega_2 ω 2 ​ is: ω 4 ω 2 = O 2 I 24 O 4 I 24 \frac{\omega_4}{\omega_2} = \frac{O_2 I_{24}}{O_4 I_{24}} ω 2 ​ ω 4 ​ ​ = O 4 ​ I 24 ​ O 2 ​ I 24 ​ ​

where O 2 ≡ I 12 O_2 \equiv I_{12} O 2 ​ ≡ I 12 ​ and O 4 ≡ I 14 O_4 \equiv I_{14} O 4 ​ ≡ I 14 ​ .

  • Mechanical Advantage & Toggle Mechanisms
  • Mechanical Advantage Definition

Assuming an ideal, frictionless mechanism, power input equals power output: P in = P out ⟹ F in v in = F out v out ( or T in ω in = T out ω out ) P_{\text{in}} = P_{\text{out}} \implies F_{\text{in}} v_{\text{in}} = F_{\text{out}} v_{\text{out}} \quad (\text{or } T_{\text{in}} \omega_{\text{in}} = T_{\text{out}} \omega_{\text{out}}) P in ​ = P out ​ ⟹ F in ​ v in ​ = F out ​ v out ​ ( or T in ​ ω in ​ = T out ​ ω out ​ )

The Mechanical Advantage ( M A MA M A ) is defined as the ratio of output force to input force: M A = F out F in = v in v out MA = \frac{F_{\text{out}}}{F_{\text{in}}} = \frac{v_{\text{in}}}{v_{\text{out}}} M A = F in ​ F out ​ ​ = v out ​ v in ​ ​

For rotational input and output: M A torque = T out T in = ω in ω out = O 4 I 24 O 2 I 24 MA_{\text{torque}} = \frac{T_{\text{out}}}{T_{\text{in}}} = \frac{\omega_{\text{in}}}{\omega_{\text{out}}} = \frac{O_4 I_{24}}{O_2 I_{24}} M A torque ​ = T in ​ T out ​ ​ = ω out ​ ω in ​ ​ = O 2 ​ I 24 ​ O 4 ​ I 24 ​ ​

Toggle Mechanisms ( M A → ∞ MA \to \infty M A → ∞ )

A toggle mechanism occurs when two moving links become collinear (the included angle between them approaches 180 ∘ 180^\circ 18 0 ∘ or 0 ∘ 0^\circ 0 ∘ ). Toggle Mechanism Alignment

  • F_in
  • |
  • v
  • Link 2 A Link 3
  • Fixed O +-----------*-----------+ B (Slider / Output Tool)
  • <----------------------->
  • Collinear Alignment (180 deg)
  • Output velocity v_B -> 0
  • Mechanical Advantage MA -> Infinity

As the links approach collinearity: v out = v in tan ⁡ α ⟹ lim ⁡ α → 0 v out = 0 v_{\text{out}} = v_{\text{in}} \tan\alpha \implies \lim_{\alpha \to 0} v_{\text{out}} = 0 v out ​ = v in ​ tan α ⟹ α → 0 lim ​ v out ​ = 0 M A = F out F in = lim ⁡ v out → 0 v in v out → ∞ MA = \frac{F_{\text{out}}}{F_{\text{in}}} = \lim_{v_{\text{out}} \to 0} \frac{v_{\text{in}}}{v_{\text{out}}} \to \infty M A = F in ​ F out ​ ​ = v out ​ → 0 lim ​ v out ​ v in ​ ​ → ∞

In actual machinery, the output force is finite, limited only by the structural elasticity of the links, frame rigidity, and pin joint clearances. Toggle positions are widely used in:

  • Rock crushers and toggle presses (generating high crushing loads from modest actuator inputs)
  • Manual clamping fixtures (holding workpieces securely without continuous clamping force)

Aircraft landing gear locks (over-center toggle geometry ensures positive mechanical lock under landing impact loads)

  • Simple Machines, Cams & Intermittent-Motion Devices
  • Simple Machines and Ideal Mechanical Advantage

Every mechanism trades force for distance. The ideal mechanical advantage (IMA) follows from geometry alone; the actual advantage is M A = η × I M A MA = \eta \times IMA M A = η × I M A .

  • Machine Ideal mechanical advantage (output force / input force)
  • Lever a / b a/b a / b (input arm length divided by output arm length)
  • Wheel and axle R / r R/r R / r
  • Pulley block (block and tackle) Number of rope parts supporting the moving block
  • Inclined plane L / h = 1 / sin ⁡ θ L/h = 1/\sin\theta L / h = 1/ sin θ (force applied along the slope)
  • Screw jack 2 π R / l 2\pi R/l 2 π R / l (handle radius R R R , lead l l l )

Mini-example: A block and tackle with four rope parts supporting the moving block lifts an 8 kN 8\,\text{kN} 8 kN load at 85 % 85\% 85% efficiency. The pull required is 8,000 / ( 4 × 0.85 ) = 2,353 N 8{,}000/(4 \times 0.85) = 2{,}353\,\text{N} 8 , 000/ ( 4 × 0.85 ) = 2 , 353 N , and 4 m 4\,\text{m} 4 m of rope must be pulled for each 1 m 1\,\text{m} 1 m of lift. Friction makes many wedges and screws self-locking (see power screws in Section 10.4).

Cams and Followers

A cam converts rotation into a programmed follower motion (rise, dwell, return). Followers may be knife-edge, roller or flat-faced, translating or oscillating, and are held in contact by a spring (force closure) or a groove (form closure). The motion law matters because acceleration drives inertia forces and vibration:

  • Rise motion Behavior at the start and end of the rise Use
  • Uniform velocity Infinite acceleration (impact) at each end Only very slow cams
  • Parabolic (constant acceleration) Finite acceleration but infinite jerk at transitions Moderate speeds
  • Simple harmonic Acceleration jumps at the ends when dwells are adjacent Moderate speeds
  • Cycloidal Zero acceleration at both ends of the rise High-speed cams with dwells

For a cycloidal rise of height h h h over cam angle β \beta β at cam speed ω \omega ω , the follower displacement is y = h [ θ / β − 1 2 π sin ⁡ ( 2 π θ / β ) ] y = h\left[\theta/\beta - \tfrac{1}{2\pi}\sin(2\pi\theta/\beta)\right] y = h [ θ / β − 2 π 1 ​ sin ( 2 π θ / β ) ] , the peak velocity is 2 h ω / β 2h\omega/\beta 2 hω / β , and the peak acceleration is 2 π h ω 2 / β 2 2\pi h \omega^2/\beta^2 2 πh ω 2 / β 2 . For a simple harmonic rise, the peak acceleration is π 2 h ω 2 / ( 2 β 2 ) \pi^2 h \omega^2/(2\beta^2) π 2 h ω 2 / ( 2 β 2 ) .

The pressure angle is the angle between the follower's direction of motion and the common normal at the contact point. A common rule of thumb keeps it below about 30 ∘ 30^\circ 3 0 ∘ for translating roller followers; a larger base circle reduces it at the cost of a bigger cam. The return spring must exceed the follower inertia force m ∣ a min ⁡ ∣ m\,|a_{\min}| m ∣ a m i n ​ ∣ during deceleration, or the follower will jump off the cam.

Intermittent-Motion Devices

An external Geneva wheel with n n n slots advances 360 ∘ / n 360^\circ/n 36 0 ∘ / n per driver revolution. It moves only while the driver turns through 180 ∘ − 360 ∘ / n 180^\circ - 360^\circ/n 18 0 ∘ − 36 0 ∘ / n and dwells for the rest: a 4-slot Geneva moves during 90 ∘ 90^\circ 9 0 ∘ of driver rotation and dwells for 270 ∘ 270^\circ 27 0 ∘ .

Ratchets and pawls permit motion in one direction only, for indexing and for holding loads on hoists and winches.

  • Step-by-Step Worked Kinematic Problem
  • Problem Statement

A planar four-bar mechanism O 2 A B O 4 O_2 A B O_4 O 2 ​ A B O 4 ​ drives an industrial sorting feeder. The mechanism has the following link lengths:

  • Ground link L 1 = O 2 O 4 = 400 mm L_1 = O_2 O_4 = 400\,\text{mm} L 1 ​ = O 2 ​ O 4 ​ = 400 mm
  • Input crank L 2 = O 2 A = 120 mm L_2 = O_2 A = 120\,\text{mm} L 2 ​ = O 2 ​ A = 120 mm
  • Coupler link L 3 = A B = 350 mm L_3 = A B = 350\,\text{mm} L 3 ​ = A B = 350 mm
  • Output rocker L 4 = O 4 B = 280 mm L_4 = O_4 B = 280\,\text{mm} L 4 ​ = O 4 ​ B = 280 mm

The input crank O 2 A O_2 A O 2 ​ A rotates at a constant angular velocity ω 2 = 25.0 rad/s \omega_2 = 25.0\,\text{rad/s} ω 2 ​ = 25.0 rad/s counterclockwise.

Calculate:

Verify Grashof's condition and identify the mechanism classification.

Compute the minimum and maximum transmission angles ( μ min ⁡ \mu_{\min} μ m i n ​ and μ max ⁡ \mu_{\max} μ m a x ​ ) and evaluate whether the linkage operates within the recommended transmission window ( 45 ∘ ≤ μ ≤ 135 ∘ 45^\circ \le \mu \le 135^\circ 4 5 ∘ ≤ μ ≤ 13 5 ∘ ).

At the configuration where crank angle θ 2 = 90.0 ∘ \theta_2 = 90.0^\circ θ 2 ​ = 90. 0 ∘ (crank perpendicular to ground line O 2 O 4 O_2 O_4 O 2 ​ O 4 ​ ), the open configuration (pin B B B above the ground line) places I 24 I_{24} I 24 ​ on the extended ground line 258.2 mm 258.2\,\text{mm} 258.2 mm to the left of O 2 O_2 O 2 ​ , so O 2 I 24 = 258.2 mm O_2 I_{24} = 258.2\,\text{mm} O 2 ​ I 24 ​ = 258.2 mm and O 4 I 24 = 658.2 mm O_4 I_{24} = 658.2\,\text{mm} O 4 ​ I 24 ​ = 658.2 mm (solve the triangle for B B B , extend line A B AB A B to the ground line, and measure). Determine the instantaneous angular velocity of the output rocker ω 4 \omega_4 ω 4 ​ , the linear velocity of pin A A A ( v A v_A v A ​ ), and the instantaneous mechanical advantage M A torque = T out / T in MA_{\text{torque}} = T_{\text{out}} / T_{\text{in}} M A torque ​ = T out ​ / T in ​ .

  • Step-by-Step Solution
  • Step 1: Grashof Condition & Linkage Classification

Identify link lengths:

  • Shortest link: s = L 2 = 120 mm s = L_2 = 120\,\text{mm} s = L 2 ​ = 120 mm
  • Longest link: l = L 1 = 400 mm l = L_1 = 400\,\text{mm} l = L 1 ​ = 400 mm

Intermediate links: p = L 4 = 280 mm p = L_4 = 280\,\text{mm} p = L 4 ​ = 280 mm , q = L 3 = 350 mm q = L_3 = 350\,\text{mm} q = L 3 ​ = 350 mm

Check Grashof's inequality: s + l = 120 + 400 = 520 mm s + l = 120 + 400 = 520\,\text{mm} s + l = 120 + 400 = 520 mm p + q = 280 + 350 = 630 mm p + q = 280 + 350 = 630\,\text{mm} p + q = 280 + 350 = 630 mm

Since s + l = 520 < p + q = 630 s + l = 520 < p + q = 630 s + l = 520 < p + q = 630 , the linkage satisfies Grashof's condition ( s + l < p + q s + l < p + q s + l < p + q ).

The shortest link s s s is link 2 (the input crank), which is pinned directly to the fixed ground frame (link 1). Therefore, by Grashof's inversion criteria, this mechanism is a Grashof Crank-Rocker Mechanism . The input crank O 2 A O_2 A O 2 ​ A can rotate continuously through 360 ∘ 360^\circ 36 0 ∘ , while the output link O 4 B O_4 B O 4 ​ B rocks back and forth.

Step 2: Transmission Angle Analysis

The transmission angle μ \mu μ is the angle between coupler A B A B A B and output rocker O 4 B O_4 B O 4 ​ B . The extreme values occur when the crank is collinear with the ground line O 2 O 4 O_2 O_4 O 2 ​ O 4 ​ :

Inner Dead Center ( θ 2 = 0 ∘ \,\theta_2 = 0^\circ\, θ 2 ​ = 0 ∘ ):

The effective base of triangle A B O 4 A B O_4 A B O 4 ​ is L 1 − L 2 = 400 − 120 = 280 mm L_1 - L_2 = 400 - 120 = 280\,\text{mm} L 1 ​ − L 2 ​ = 400 − 120 = 280 mm .

Applying the law of cosines: cos ⁡ μ min ⁡ = L 3 2 + L 4 2 − ( L 1 − L 2 ) 2 2 L 3 L 4 = 350 2 + 280 2 − 280 2 2 × 350 × 280 = 350 2 2 × 350 × 280 = 350 560 = 0.625 \cos\mu_{\min} = \frac{L_3^2 + L_4^2 - (L_1 - L_2)^2}{2 L_3 L_4} = \frac{350^2 + 280^2 - 280^2}{2 \times 350 \times 280} = \frac{350^2}{2 \times 350 \times 280} = \frac{350}{560} = 0.625 cos μ m i n ​ = 2 L 3 ​ L 4 ​ L 3 2 ​ + L 4 2 ​ − ( L 1 ​ − L 2 ​ ) 2 ​ = 2 × 350 × 280 35 0 2 + 28 0 2 − 28 0 2 ​ = 2 × 350 × 280 35 0 2 ​ = 560 350 ​ = 0.625 μ min ⁡ = arccos ⁡ ( 0.625 ) ≈ 51.32 ∘ \mu_{\min} = \arccos(0.625) \approx 51.32^\circ μ m i n ​ = arccos ( 0.625 ) ≈ 51.3 2 ∘

Outer Dead Center ( θ 2 = 180 ∘ \,\theta_2 = 180^\circ\, θ 2 ​ = 18 0 ∘ ):

The effective base of triangle A B O 4 A B O_4 A B O 4 ​ is L 1 + L 2 = 400 + 120 = 520 mm L_1 + L_2 = 400 + 120 = 520\,\text{mm} L 1 ​ + L 2 ​ = 400 + 120 = 520 mm .

Applying the law of cosines: cos ⁡ μ max ⁡ = L 3 2 + L 4 2 − ( L 1 + L 2 ) 2 2 L 3 L 4 = 350 2 + 280 2 − 520 2 2 × 350 × 280 = 122 , ⁣ 500 + 78 , ⁣ 400 − 270 , ⁣ 400 196 , ⁣ 000 = − 69 , ⁣ 500 196 , ⁣ 000 ≈ − 0.35459 \cos\mu_{\max} = \frac{L_3^2 + L_4^2 - (L_1 + L_2)^2}{2 L_3 L_4} = \frac{350^2 + 280^2 - 520^2}{2 \times 350 \times 280} = \frac{122,\!500 + 78,\!400 - 270,\!400}{196,\!000} = \frac{-69,\!500}{196,\!000} \approx -0.35459 cos μ m a x ​ = 2 L 3 ​ L 4 ​ L 3 2 ​ + L 4 2 ​ − ( L 1 ​ + L 2 ​ ) 2 ​ = 2 × 350 × 280 35 0 2 + 28 0 2 − 52 0 2 ​ = 196 , 000 122 , 500 + 78 , 400 − 270 , 400 ​ = 196 , 000 − 69 , 500 ​ ≈ − 0.35459 μ max ⁡ = arccos ⁡ ( − 0.35459 ) ≈ 110.77 ∘ \mu_{\max} = \arccos(-0.35459) \approx 110.77^\circ μ m a x ​ = arccos ( − 0.35459 ) ≈ 110.7 7 ∘

Evaluation : 45 ∘ ≤ μ min ⁡ = 51.3 ∘ < μ max ⁡ = 110.8 ∘ ≤ 135 ∘ 45^\circ \le \mu_{\min} = 51.3^\circ < \mu_{\max} = 110.8^\circ \le 135^\circ 4 5 ∘ ≤ μ m i n ​ = 51. 3 ∘ < μ m a x ​ = 110. 8 ∘ ≤ 13 5 ∘

The entire transmission angle excursion ( 51.3 ∘ 51.3^\circ 51. 3 ∘ to 110.8 ∘ 110.8^\circ 110. 8 ∘ ) falls well within the recommended 45 ∘ ≤ μ ≤ 135 ∘ 45^\circ \le \mu \le 135^\circ 4 5 ∘ ≤ μ ≤ 13 5 ∘ operational window. The linkage will operate smoothly with low pin friction and no danger of binding.

Step 3: Velocity and Mechanical Advantage Analysis

Compute the linear velocity of pin A A A : v A = ω 2 L 2 = ( 25.0 rad/s ) × ( 0.120 m ) = 3.00 m/s v_A = \omega_2 L_2 = (25.0\,\text{rad/s}) \times (0.120\,\text{m}) = 3.00\,\text{m/s} v A ​ = ω 2 ​ L 2 ​ = ( 25.0 rad/s ) × ( 0.120 m ) = 3.00 m/s

Using the instant center I 24 I_{24} I 24 ​ , the angular velocity ratio between output link 4 and input link 2 is: ω 4 ω 2 = O 2 I 24 O 4 I 24 = 258.2 mm 658.2 mm = 0.3923 \frac{\omega_4}{\omega_2} = \frac{O_2 I_{24}}{O_4 I_{24}} = \frac{258.2\,\text{mm}}{658.2\,\text{mm}} = 0.3923 ω 2 ​ ω 4 ​ ​ = O 4 ​ I 24 ​ O 2 ​ I 24 ​ ​ = 658.2 mm 258.2 mm ​ = 0.3923

Compute output rocker angular velocity ω 4 \omega_4 ω 4 ​ : ω 4 = ω 2 × 0.3923 = 25.0 rad/s × 0.3923 = 9.81 rad/s \omega_4 = \omega_2 \times 0.3923 = 25.0\,\text{rad/s} \times 0.3923 = 9.81\,\text{rad/s} ω 4 ​ = ω 2 ​ × 0.3923 = 25.0 rad/s × 0.3923 = 9.81 rad/s

Compute ideal torque mechanical advantage: M A torque = T out T in = ω 2 ω 4 = 1 0.3923 = 658.2 258.2 ≈ 2.549 MA_{\text{torque}} = \frac{T_{\text{out}}}{T_{\text{in}}} = \frac{\omega_2}{\omega_4} = \frac{1}{0.3923} = \frac{658.2}{258.2} \approx 2.549 M A torque ​ = T in ​ T out ​ ​ = ω 4 ​ ω 2 ​ ​ = 0.3923 1 ​ = 258.2 658.2 ​ ≈ 2.549

Because I 24 I_{24} I 24 ​ lies outside the two fixed pivots, the rocker turns in the same direction as the crank. The linkage amplifies the input torque by a factor of about 2.55 at this configuration.