Study guide
7.2 Bolted Joint Stiffness, External Loading & Separation
PE Mechanical: Machine Design and Materials Exam
Track your progress as you read
Finished sections get a check mark.
1 Chapter 1: Basic Engineering Practice: Drawings, Economics & Design Methodology
1.1 Engineering Terms, Symbols, Drawing Interpretation & Conventions 1.2 Project Management & Engineering Economics 1.3 Design Methodology, Risk Assessment & Safety
2 Chapter 2: Physical & Mechanical Properties of Engineering Materials
2.1 Stress-Strain Relationships & Fundamental Mechanical Properties 2.2 Physical Properties, Temperature Effects, Hardness, Impact Toughness & Creep
3 Chapter 3: Mechanics of Materials: Fundamental Loadings & Deflections
3.1 Axial Loading, Normal Stress & Statically Indeterminate Members 3.2 Direct Shear, Bearing & Transverse Shear in Beams 3.3 Torsion of Shafts, Power Transmission & Thin-Walled Tubes 3.4 Beam Bending Stresses & Deflection Analysis
4 Chapter 4: Mechanics of Materials: Stability, Multiaxial Stress & Thermal Effects
4.1 Column Buckling & Elastic/Inelastic Instability 4.2 Combined Loading, Principal Stresses & Mohr's Circle 4.3 Thermal Stresses & Interference Stresses
5 Chapter 5: Failure Theories: Static Yielding & Fracture Mechanics
5.1 Static Failure Theories for Ductile Materials: von Mises & Tresca 5.2 Static Failure Theories for Brittle Materials & Fracture Mechanics
6 Chapter 6: Fatigue Analysis & Dynamic Failure
6.1 High-Cycle Fatigue, S-N Curves & Marin Modifying Factors 6.2 Fluctuating Stresses, Failure Criteria & Cumulative Damage
7 Chapter 7: Mechanical Attachments: Fasteners & Bolted Joints
7.1 Threaded Fasteners, Proof Strength & Preload Mechanics 7.2 Bolted Joint Stiffness, External Loading & Separation 7.3 Non-Threaded Fasteners: Keys, Pins, Clevises, Retaining Rings, Rivets, Lugs & Anchors
8 Chapter 8: Mechanical Attachments: Permanent Joints & Bonding
8.1 Welded Joints & Weld Group Stress Analysis 8.2 Brazing, Soldering & Structural Adhesive Bonding
9 Chapter 9: Power Transmission: Shafts & Gearing
9.1 Transmission Shaft Design, Critical Speeds & Deflection 9.2 Spur Gears: Geometry, Kinematics & AGMA Stress Equations 9.3 Helical, Bevel & Worm Gearing
10 Chapter 10: Power Transmission: Bearings, Flexible Drives, Friction Devices & Prime Movers
10.1 Rolling-Element Bearings & L10 Life Calculations 10.2 Hydrodynamic Journal Bearings & Lubrication Regimes 10.3 Belts, Roller Chains & Flexible Drives 10.4 Clutches, Brakes & Power Screws 10.5 Electric Motors, Engines & Flywheels
11 Chapter 11: Mechanical Components: Pressure Vessels & Structural Systems
11.1 Pressure Vessels & Piping: Thin and Thick Walls, ASME VIII and B31 11.2 Mechanical Springs: Helical, Belleville & Leaf Springs 11.3 Structural Trusses, Rigid Frames & Energy Methods
12 Chapter 12: Mechanical Dynamics, Vibrations & Fluid Power
12.1 Single-Degree-of-Freedom Vibrations & Resonance 12.2 Vibration Isolation, Multi-DOF Systems & Transmissibility 12.3 Fluid Power Systems: Hydraulics & Pneumatics
13 Chapter 13: Kinematics, Mechatronics & Control Systems
13.1 Mechanism Kinematics, Linkages, Cams & Simple Machines 13.2 Basic Mechatronics, Sensors & Closed-Loop Controls
14 Chapter 14: Supportive Knowledge: Fits, Tolerances & Manufacturing Methods
14.1 Limits, Fits & Geometric Dimensioning & Tolerancing (GD&T) 14.2 Manufacturing Methods, Machinability, Heat Treatment & Assembly
15 Chapter 15: Supportive Knowledge: Codes, Computation, Testing & Corrosion
15.1 Engineering Codes & Standards 15.2 Computational Methods: FEA & Numerical Analysis 15.3 Instrumentation, Testing, Inspection & Quality 15.4 Chemical Processes: Corrosion, Oxidation & Embrittlement
7.2 Bolted Joint Stiffness, External Loading & Separation
Key Takeaways Explain This Topic AI
A preloaded bolted joint functions as two springs in parallel resisting external tension: the bolt acts in tension ( k b k_b k b ), while the clamped members act in compression ( k m k_m k m ).
The joint stiffness constant C = k b k b + k m C = \frac{k_b}{k_b + k_m} C = k b + k m k b governs load distribution; in metal-to-metal joints, C C C typically ranges from 0.15 0.15 0.15 to 0.25 0.25 0.25 , meaning the bolt absorbs only 15 % – 25 % 15\%\text{--}25\% 15% – 25% of an applied external tensile load P P P ( F b = F i + C P F_b = F_i + C P F b = F i + CP ).
Joint separation occurs when compressive clamping force on the members drops to zero ( F m = F i − ( 1 − C ) P ≤ 0 F_m = F_i - (1-C) P \le 0 F m = F i − ( 1 − C ) P ≤ 0 ), defining the critical separation load as P sep = F i 1 − C P_{\text{sep}} = \frac{F_i}{1 - C} P sep = 1 − C F i .
High initial bolt preload dramatically extends fatigue life: because alternating bolt stress is proportional to C ( P max − P min ) / ( 2 A t ) C(P_{\max} - P_{\min}) / (2 A_t) C ( P m a x − P m i n ) / ( 2 A t ) , maintaining clamp compression keeps stress amplitude σ a \sigma_a σ a exceptionally small.
In gasketed connections, the low elastic modulus of soft gasket materials drastically reduces member stiffness k m k_m k m , driving C C C toward 0.70 – 0.95 0.70\text{--}0.95 0.70 – 0.95 and requiring design to ASME Boiler Code seating ( y y y ) and maintenance ( m m m ) factors.
Last updated: October 2026
7.2 Bolted Joint Stiffness, External Loading & Separation
A preloaded bolted joint is a statically indeterminate elastic system. When a bolt is tightened, it stretches like a tensile spring, while the clamped structural plates compress like a massive compressive spring. When external service forces act to pull the connected plates apart, the applied load does not transfer directly into the bolt alone. Instead, the bolt and clamped members share the load based on their relative elastic stiffnesses. Mastering joint stiffness derivations, separation margins, and fatigue mitigation is essential for high-integrity machine design.
The Bolted Connection Spring Model
Consider a bolted joint subjected to initial preload F i F_i F i and subsequently loaded by an external tensile force P P P : Dual-Spring Mechanical Model
[ Bolt Head ] Joint Equilibrium Equations:
| ----------------------------
+-----+-----+ Initial State:
- | | F_bolt = F_i (Tension)
- | k_b | (Tension Spring) F_memb = F_i (Compression)
- | |
+-----+-----------+-----+ Under External Tensile Load P:
- | | k_m | | F_b = F_i + C * P
- | | | | (Compression F_m = F_i - (1 - C) * P
- | P <-+ Members +-> P | Springs)
- | | | | Where C = k_b / (k_b + k_m)
- +-----+-----------+-----+ Joint Constant (Typically 0.15 - 0.25)
- | |
+-----+-----+ Separation Threshold (F_m = 0):
- | P_sep = F_i / (1 - C)
- [ Nut ]
- Displacement Compatibility & Load Distribution Derivation
Initial Preload State :
Under tightening preload F i F_i F i , the bolt elongates by δ b , 0 = F i / k b \delta_{b,0} = F_i / k_b δ b , 0 = F i / k b , and the clamped members compress by δ m , 0 = F i / k m \delta_{m,0} = F_i / k_m δ m , 0 = F i / k m .
Application of External Tension ( P P P ) :
An external tensile load P P P attempts to separate the clamped plates. The joint undergoes a net elongation Δ δ \Delta \delta Δ δ :
The bolt elongates further by Δ δ \Delta \delta Δ δ , increasing its tensile force by Δ F b = k b Δ δ \Delta F_b = k_b \Delta \delta Δ F b = k b Δ δ .
The clamped members relax (expand) by the exact same Δ δ \Delta \delta Δ δ , relieving a portion of their compressive clamp force by Δ F m = k m Δ δ \Delta F_m = k_m \Delta \delta Δ F m = k m Δ δ .
Force Equilibrium :
The external tensile load must be balanced by the sum of the increase in bolt tension and the decrease in member clamping force: P = Δ F b + Δ F m = k b Δ δ + k m Δ δ = ( k b + k m ) Δ δ P = \Delta F_b + \Delta F_m = k_b \Delta \delta + k_m \Delta \delta = (k_b + k_m) \Delta \delta P = Δ F b + Δ F m = k b Δ δ + k m Δ δ = ( k b + k m ) Δ δ Solving for the joint deflection: Δ δ = P k b + k m \Delta \delta = \frac{P}{k_b + k_m} Δ δ = k b + k m P
Load Sharing Equations :
Substituting Δ δ \Delta \delta Δ δ back into the individual spring force equations: Δ F b = k b Δ δ = ( k b k b + k m ) P = C P \Delta F_b = k_b \Delta \delta = \left(\frac{k_b}{k_b + k_m}\right) P = C P Δ F b = k b Δ δ = ( k b + k m k b ) P = CP Δ F m = k m Δ δ = ( k m k b + k m ) P = ( 1 − C ) P \Delta F_m = k_m \Delta \delta = \left(\frac{k_m}{k_b + k_m}\right) P = (1 - C) P Δ F m = k m Δ δ = ( k b + k m k m ) P = ( 1 − C ) P where C C C is the joint stiffness constant : C = k b k b + k m C = \frac{k_b}{k_b + k_m} C = k b + k m k b
Total Resulting Forces :
Total Bolt Tensile Load ( F b F_b F b ) : F b = F i + Δ F b = F i + C P F_b = F_i + \Delta F_b = F_i + C P F b = F i + Δ F b = F i + CP
Total Member Clamping Force ( F m F_m F m ) : F m = F i − Δ F m = F i − ( 1 − C ) P F_m = F_i - \Delta F_m = F_i - (1 - C) P F m = F i − Δ F m = F i − ( 1 − C ) P
Bolt Stiffness Derivation ( k b k_b k b )
The grip length l l l of a bolted connection represents the total combined thickness of all clamped plates and washers. Within this grip length, the bolt consists of two sections in series:
An unthreaded body shank of length l d l_d l d and nominal cross-sectional area A d = π 4 d 2 A_d = \frac{\pi}{4} d^2 A d = 4 π d 2 .
A threaded portion of length l t = l − l d l_t = l - l_d l t = l − l d and tensile stress area A t A_t A t . Bolt Grip Elastic Zones
- |<---------------------- Grip Length l --------------------->|
- +-----------------------------------+------------------------+
- | Unthreaded Body Shank | Threaded Section |
- | Length: l_d, Area: A_d | Length: l_t, Area: A_t |
- +-----------------------------------+------------------------+
Because the two sections act as elastic springs in series, their compliances add directly: 1 k b = 1 k d + 1 k t = l d A d E b + l t A t E b \frac{1}{k_b} = \frac{1}{k_d} + \frac{1}{k_t} = \frac{l_d}{A_d E_b} + \frac{l_t}{A_t E_b} k b 1 = k d 1 + k t 1 = A d E b l d + A t E b l t
Solving for the equivalent bolt stiffness k b k_b k b : k b = A d A t E b A d l t + A t l d k_b = \frac{A_d A_t E_b}{A_d l_t + A_t l_d} k b = A d l t + A t l d A d A t E b
If the bolt is fully threaded throughout the entire grip ( l d = 0 , l t = l l_d = 0, l_t = l l d = 0 , l t = l ), the stiffness simplifies to k b = A t E b l k_b = \frac{A_t E_b}{l} k b = l A t E b .
Member Compressive Stiffness Derivation ( k m k_m k m )
Unlike the slender cylindrical bolt, the clamped members are broad plates. Clamping pressure does not distribute uniformly across the entire plate width; instead, compressive stress spreads outward from the bolt head and washer bearing face, forming a stress field modeled as the frustum of a hollow cone (the Rötscher pressure cone). Frustum of a Hollow Cone (Rötscher Cone)
- d_w (Washer Face Diameter ~ 1.5 d)
- | <---------> |
- +-------------+
- /| |\
- / | | \ Half-Apex Angle
- / | | \ alpha = 30°
- / | Hole d | \
- / | | \
- +-----+-------------+-----+
- | <---------------------> |
- D
- Conical Frustum Formulation
Standard machine design adopts a cone half-apex angle of α = 30 ∘ \alpha = 30^\circ α = 3 0 ∘ (with washer face diameter d w ≈ 1.5 d d_w \approx 1.5 d d w ≈ 1.5 d ).
Integrating the compliance of an infinitesimal conical slice of thickness d x dx d x at depth x x x : d ( 1 k ) = d x E m A ( x ) = d x E m π 4 [ ( d w + 2 x tan α ) 2 − d 2 ] d\left(\frac{1}{k}\right) = \frac{dx}{E_m A(x)} = \frac{dx}{E_m \frac{\pi}{4}\left[(d_w + 2 x \tan\alpha)^2 - d^2\right]} d ( k 1 ) = E m A ( x ) d x = E m 4 π [ ( d w + 2 x tan α ) 2 − d 2 ] d x
Evaluating the integral across a plate of thickness t t t yields the classical stiffness formula for a single frustum: k = π E m d tan α ln [ ( 2 t tan α + d w − d ) ( d w + d ) ( 2 t tan α + d w + d ) ( d w − d ) ] k = \frac{\pi E_m d \tan\alpha}{\ln\left[ \frac{(2 t \tan\alpha + d_w - d)(d_w + d)}{(2 t \tan\alpha + d_w + d)(d_w - d)} \right]} k = ln [ ( 2 t t a n α + d w + d ) ( d w − d ) ( 2 t t a n α + d w − d ) ( d w + d ) ] π E m d tan α
For a standard symmetrical joint consisting of two identical plates of thickness t = l / 2 t = l/2 t = l /2 clamped back-to-back, the member assembly consists of two identical frusta in series ( 1 / k m = 1 / k 1 + 1 / k 2 = 2 / k 1 1/k_m = 1/k_1 + 1/k_2 = 2/k_1 1/ k m = 1/ k 1 + 1/ k 2 = 2/ k 1 ): k m = k 1 2 = π E m d tan 30 ∘ 2 ln [ ( l tan 30 ∘ + d w − d ) ( d w + d ) ( l tan 30 ∘ + d w + d ) ( d w − d ) ] k_m = \frac{k_1}{2} = \frac{\pi E_m d \tan 30^\circ}{2 \ln\left[ \frac{(l \tan 30^\circ + d_w - d)(d_w + d)}{(l \tan 30^\circ + d_w + d)(d_w - d)} \right]} k m = 2 k 1 = 2 ln [ ( l t a n 3 0 ∘ + d w + d ) ( d w − d ) ( l t a n 3 0 ∘ + d w − d ) ( d w + d ) ] π E m d tan 3 0 ∘
Multi-Plate and Dissimilar Material Assemblies
When clamped members comprise different materials (e.g., an aluminum cylinder head bolted to a cast iron engine block) or multiple plates of differing thicknesses, each layer is modeled as an individual conical frustum with its respective thickness t i t_i t i and modulus E i E_i E i . The total equivalent member stiffness is calculated from series addition: 1 k m = 1 k 1 + 1 k 2 + 1 k 3 + ⋯ + 1 k n \frac{1}{k_m} = \frac{1}{k_1} + \frac{1}{k_2} + \frac{1}{k_3} + \dots + \frac{1}{k_n} k m 1 = k 1 1 + k 2 1 + k 3 1 + ⋯ + k n 1
Empirical Exponential Approximation
For standard steel-on-steel joints without gaskets, Wileman, Choudhury, and Green derived an accurate curve-fit approximation: k m = E m d A e b ( d / l ) k_m = E_m d A e^{b(d/l)} k m = E m d A e b ( d / l )
where for steel ( E = 30 Mpsi E = 30\text{ Mpsi} E = 30 Mpsi or 207 GPa 207\text{ GPa} 207 GPa ) with d w = 1.5 d d_w = 1.5 d d w = 1.5 d and α = 30 ∘ \alpha = 30^\circ α = 3 0 ∘ :
- A = 0.78715 A = 0.78715 A = 0.78715
- b = 0.62873 b = 0.62873 b = 0.62873
- The Joint Stiffness Constant ( C C C ) & Physical Significance
The dimensionless parameter C = k b k b + k m C = \frac{k_b}{k_b + k_m} C = k b + k m k b is the single most important metric in bolted joint mechanics:
Joint Configuration Member vs. Bolt Stiffness Joint Constant C C C Mechanical Behavior
Rigid Metal-to-Metal (No Gasket) k m ≈ 3 k b to 5 k b k_m \approx 3 k_b \text{ to } 5 k_b k m ≈ 3 k b to 5 k b 0.15 to 0.25 0.15 \text{ to } 0.25 0.15 to 0.25 Bolt absorbs only 15 % – 25 % 15\%\text{--}25\% 15% – 25% of external load; 75 % – 85 % 75\%\text{--}85\% 75% – 85% relieves clamp compression. Highly resistant to fatigue.
Soft Gasketed Flange k m ≪ k b k_m \ll k_b k m ≪ k b ( E gasket ≪ E steel E_{\text{gasket}} \ll E_{\text{steel}} E gasket ≪ E steel ) 0.70 to 0.95 0.70 \text{ to } 0.95 0.70 to 0.95 Bolt absorbs nearly all external tension. Severe alternating stresses; high fatigue risk.
- Joint Separation Criterion & Factors of Safety
- 1. The Separation Criterion ( F m = 0 F_m = 0 F m = 0 )
As the external tensile load P P P increases, the compressive clamping force F m F_m F m decreases continuously. If the external load reaches the critical threshold where F m F_m F m drops to zero, the clamped members detach from one another. This condition is joint separation : F m = F i − ( 1 − C ) P sep = 0 ⟹ P sep = F i 1 − C F_m = F_i - (1 - C) P_{\text{sep}} = 0 \implies P_{\text{sep}} = \frac{F_i}{1 - C} F m = F i − ( 1 − C ) P sep = 0 ⟹ P sep = 1 − C F i
Caution
Once joint separation occurs ( P > P sep P > P_{\text{sep}} P > P sep ), member stiffness disappears ( k m = 0 k_m = 0 k m = 0 ). The joint constant jumps instantaneously to C = 1.0 C = 1.0 C = 1.0 . The bolt must now absorb 100 % 100\% 100% of any additional external load ( F b = P F_b = P F b = P ), resulting in catastrophic joint leakage, severe cyclic shock loading, and rapid fatigue fracture.
2. Factor of Safety Against Separation ( n sep n_{\text{sep}} n sep )
The separation factor of safety quantifies the margin between the operating external load P P P and the separation threshold: n sep = P sep P = F i ( 1 − C ) P n_{\text{sep}} = \frac{P_{\text{sep}}}{P} = \frac{F_i}{(1 - C) P} n sep = P P sep = ( 1 − C ) P F i
Designers commonly target n sep n_{\text{sep}} n sep of about 1.5 1.5 1.5 to 2.0 2.0 2.0 or more, depending on the consequences of separation (leakage, loosening, fatigue).
3. Factor of Safety Against Bolt Yielding ( n y n_y n y )
Under maximum external service load P P P , the bolt must not exceed its proof strength ( S p S_p S p ) or yield strength ( S y S_y S y ): n y = S p A t F b = S p A t F i + C P n_y = \frac{S_p A_t}{F_b} = \frac{S_p A_t}{F_i + C P} n y = F b S p A t = F i + CP S p A t
4. Overload Margin Factor ( n L n_L n L )
The overload margin represents the ratio by which the external load P P P can be multiplied before bolt yield occurs: F b = F i + C ( n L P ) = S p A t ⟹ n L = S p A t − F i C P F_b = F_i + C (n_L P) = S_p A_t \implies n_L = \frac{S_p A_t - F_i}{C P} F b = F i + C ( n L P ) = S p A t ⟹ n L = CP S p A t − F i
Fatigue Loading & The Preload Paradox
In dynamic machinery (internal combustion engines, reciprocating compressors, turbine casings), external tensile loads fluctuate continuously between P min P_{\min} P m i n and P max P_{\max} P m a x . Bolted Joint Fatigue Mechanics
- Load ^
- | External Load Cycles: P_min to P_max
- | Bolt Tension Cycles: F_b,min to F_b,max
- F_b,max+ - - - - - - - - - - - - - - - - - - - - - - - - - - - - -+---/
- | /\ /\ | C * (P_max - P_min)
- | / \ / \ +---\
- F_b,min+ - - - - - - - - - / - -\- - - - - - / - -\- - - - - - - -+
- | / \ / \
- F_i +=================+========+========+========+=============+ (Heavy Static Preload)
- |
- +----------------------------------------------------------> Time
- Alternating and Mean Stresses in the Bolt
Under cyclic external loading from P min P_{\min} P m i n to P max P_{\max} P m a x :
Maximum bolt force: F b , max = F i + C P max F_{b,\max} = F_i + C P_{\max} F b , m a x = F i + C P m a x
Minimum bolt force: F b , min = F i + C P min F_{b,\min} = F_i + C P_{\min} F b , m i n = F i + C P m i n
The alternating force amplitude ( F a F_a F a ) and mean force ( F m F_m F m ) are: F a = F b , max − F b , min 2 = C ( P max − P min ) 2 F_a = \frac{F_{b,\max} - F_{b,\min}}{2} = \frac{C(P_{\max} - P_{\min})}{2} F a = 2 F b , m a x − F b , m i n = 2 C ( P m a x − P m i n ) F m = F b , max + F b , min 2 = F i + C ( P max + P min ) 2 F_m = \frac{F_{b,\max} + F_{b,\min}}{2} = F_i + \frac{C(P_{\max} + P_{\min})}{2} F m = 2 F b , m a x + F b , m i n = F i + 2 C ( P m a x + P m i n )
Dividing by the tensile stress area A t A_t A t yields the cyclic stresses: σ a = F a A t = C ( P max − P min ) 2 A t \sigma_a = \frac{F_a}{A_t} = \frac{C(P_{\max} - P_{\min})}{2 A_t} σ a = A t F a = 2 A t C ( P m a x − P m i n ) σ m = F m A t = F i A t + C ( P max + P min ) 2 A t \sigma_m = \frac{F_m}{A_t} = \frac{F_i}{A_t} + \frac{C(P_{\max} + P_{\min})}{2 A_t} σ m = A t F m = A t F i + 2 A t C ( P m a x + P m i n )
The Preload Fatigue Paradox Explained
Superficially, introducing a heavy preload F i F_i F i increases the mean stress σ m \sigma_m σ m substantially. On a standard Haigh or Goodman diagram, higher mean tensile stress degrades fatigue life. Why, then, is high preload universal practice for dynamic joints?
Because C C C is small ( C ≈ 0.20 C \approx 0.20 C ≈ 0.20 ), the alternating stress amplitude σ a \sigma_a σ a felt by the bolt is attenuated by 80 % 80\% 80% compared to an un-preloaded pin or separated joint! In high-cycle fatigue, crack initiation and propagation are exponentially sensitive to alternating stress amplitude σ a \sigma_a σ a , while mean stress σ m \sigma_m σ m plays a secondary role. High preload keeps the joint firmly clamped, keeping σ a \sigma_a σ a well below the endurance limit ( S e S_e S e ) and ensuring infinite fatigue life.
Modified Goodman Fatigue Safety Factor ( n f n_f n f )
Using the modified Goodman criterion with fully corrected bolt endurance limit S e S_e S e : σ a S e + σ m S u t = 1 n f \frac{\sigma_a}{S_e} + \frac{\sigma_m}{S_{ut}} = \frac{1}{n_f} S e σ a + S u t σ m = n f 1
Gasketed Joints & ASME Boiler Code Mechanics
When a joint must contain pressurized fluids, a sealing gasket is compressed between mating flanges. Gaskets alter joint mechanics completely:
1. Elastic Destruction of Member Stiffness ( k m k_m k m )
Because elastomeric, compressed fiber, or spiral-wound gaskets have elastic moduli ( E gasket ≈ 10 to 500 kpsi E_{\text{gasket}} \approx 10\text{ to }500\text{ kpsi} E gasket ≈ 10 to 500 kpsi ) hundreds of times lower than steel ( E steel = 30 , 000 kpsi E_{\text{steel}} = 30,000\text{ kpsi} E steel = 30 , 000 kpsi ), the gasket's compliance completely dominates the series sum: 1 k m = 1 k flange + 1 k gasket ≈ 1 k gasket \frac{1}{k_m} = \frac{1}{k_{\text{flange}}} + \frac{1}{k_{\text{gasket}}} \approx \frac{1}{k_{\text{gasket}}} k m 1 = k flange 1 + k gasket 1 ≈ k gasket 1
As k m k_m k m plummets, the joint stiffness constant surges toward unity ( C → 0.80 – 0.95 C \to 0.80\text{--}0.95 C → 0.80 – 0.95 ). Consequently, almost 100 % 100\% 100% of any cyclic fluid pressure pulse transfers directly into the bolt as alternating tension, dramatically heightening fatigue risk.
2. ASME Boiler & Pressure Vessel Code (Section VIII, Division 1)
The ASME Code governs flanged pressure connections using two standardized design factors:
Gasket Seating Factor ( y y y , psi) : The minimum initial compressive clamping pressure required to plastically deform the gasket material into the micro-imperfections of the flange faces during assembly before internal pressurization: W m 2 = π b G y W_{m2} = \pi b G y W m 2 = πb G y where b b b is the effective gasket seating width, and G G G is the mean diameter of the gasket contact face.
Gasket Maintenance Factor ( m m m , dimensionless) : The minimum ratio of residual compressive clamping stress on the gasket to internal fluid pressure ( P g P_g P g ) required to maintain a leak-tight seal during operating pressure: W m 1 = π 4 G 2 P g + 2 b π G m P g W_{m1} = \frac{\pi}{4} G^2 P_g + 2 b \pi G m P_g W m 1 = 4 π G 2 P g + 2 bπ G m P g where π 4 G 2 P g \frac{\pi}{4} G^2 P_g 4 π G 2 P g is the hydrostatic end force tending to separate the flanges, and 2 b π G m P g 2 b \pi G m P_g 2 bπ G m P g is the required residual compressive gasket seal load.
The required total bolting area is dictated by the governing condition: A m = max ( W m 1 / S b , W m 2 / S a ) A_m = \max(W_{m1} / S_b, W_{m2} / S_a) A m = max ( W m 1 / S b , W m 2 / S a ) .
- Worked Engineering Scenario: Cylinder Head Bolted Joint Analysis Internal Pressure Fluctuates: 0 to P_max
- ||||
- vvvv
- +----------------------------------+
- | Cylinder Head Cover |
- +==================================+ <-- Gasket / Interface
- | Cylinder Block |
- +----------------------------------+
- | |
- Bolt 1 Bolt 2
- (M16 x 2.0 Cl 10.9) (M16 x 2.0 Cl 10.9)
- Problem Statement
A high-pressure hydraulic actuator cylinder head is clamped to a steel cylinder body using eight M16 x 2.0 ISO Property Class 10.9 bolts in a metal-to-metal connection without a soft gasket.
Geometric and material properties:
- Bolt: M16 x 2.0 ( d = 16.0 mm d = 16.0\text{ mm} d = 16.0 mm , pitch p = 2.0 mm p = 2.0\text{ mm} p = 2.0 mm )
- Tensile stress area: A t = 157 mm 2 A_t = 157\text{ mm}^2 A t = 157 mm 2
Nominal body area: A d = π 4 ( 16 ) 2 = 201.1 mm 2 A_d = \frac{\pi}{4}(16)^2 = 201.1\text{ mm}^2 A d = 4 π ( 16 ) 2 = 201.1 mm 2
Total clamped grip length: l = 60.0 mm l = 60.0\text{ mm} l = 60.0 mm (two steel plates of thickness t 1 = t 2 = 30.0 mm t_1 = t_2 = 30.0\text{ mm} t 1 = t 2 = 30.0 mm )
Unthreaded shank length in grip: l d = 25.0 mm l_d = 25.0\text{ mm} l d = 25.0 mm
Threaded shank length in grip: l t = l − l d = 60.0 − 25.0 = 35.0 mm l_t = l - l_d = 60.0 - 25.0 = 35.0\text{ mm} l t = l − l d = 60.0 − 25.0 = 35.0 mm
Modulus of elasticity (bolt and steel plates): E b = E m = 207 GPa = 207 × 10 3 N/mm 2 E_b = E_m = 207\text{ GPa} = 207 \times 10^3\text{ N/mm}^2 E b = E m = 207 GPa = 207 × 1 0 3 N/mm 2
Class 10.9 properties: Proof strength S p = 830 MPa S_p = 830\text{ MPa} S p = 830 MPa , Ultimate tensile strength S u t = 1 , 000 MPa S_{ut} = 1,000\text{ MPa} S u t = 1 , 000 MPa
Fully modified endurance limit: S e = 150 MPa S_e = 150\text{ MPa} S e = 150 MPa
Service loading: Fluctuating internal cylinder pressure applies an external cyclic tensile load ranging from P min = 0 P_{\min} = 0 P m i n = 0 to P max = 32.0 kN P_{\max} = 32.0\text{ kN} P m a x = 32.0 kN per bolt .
Calculate:
The bolt stiffness k b k_b k b , member stiffness k m k_m k m , and joint stiffness constant C C C .
The recommended reusable preload F i F_i F i .
The maximum bolt load F b , max F_{b,\max} F b , m a x and minimum clamping force F m , min F_{m,\min} F m , m i n .
The factor of safety against joint separation ( n sep n_{\text{sep}} n sep ) and factor of safety against bolt yielding ( n y n_y n y ).
The alternating stress σ a \sigma_a σ a , mean stress σ m \sigma_m σ m , and the modified Goodman fatigue safety factor n f n_f n f .
Step-by-Step Mathematical Solution
Step 1: Bolt Stiffness ( k b k_b k b ) k b = A d A t E b A d l t + A t l d k_b = \frac{A_d A_t E_b}{A_d l_t + A_t l_d} k b = A d l t + A t l d A d A t E b k b = ( 201.1 mm 2 ) ( 157.0 mm 2 ) ( 207 × 10 3 N/mm 2 ) ( 201.1 mm 2 ) ( 35.0 mm ) + ( 157.0 mm 2 ) ( 25.0 mm ) k_b = \frac{(201.1\text{ mm}^2)(157.0\text{ mm}^2)(207 \times 10^3\text{ N/mm}^2)}{(201.1\text{ mm}^2)(35.0\text{ mm}) + (157.0\text{ mm}^2)(25.0\text{ mm})} k b = ( 201.1 mm 2 ) ( 35.0 mm ) + ( 157.0 mm 2 ) ( 25.0 mm ) ( 201.1 mm 2 ) ( 157.0 mm 2 ) ( 207 × 1 0 3 N/mm 2 ) k b = 6.5356 × 10 9 7 , 038.5 + 3 , 925.0 = 6.5356 × 10 9 10 , 963.5 = 5.9612 × 10 5 N/mm = 596.1 MN/m k_b = \frac{6.5356 \times 10^9}{7,038.5 + 3,925.0} = \frac{6.5356 \times 10^9}{10,963.5} = 5.9612 \times 10^5\text{ N/mm} = 596.1\text{ MN/m} k b = 7 , 038.5 + 3 , 925.0 6.5356 × 1 0 9 = 10 , 963.5 6.5356 × 1 0 9 = 5.9612 × 1 0 5 N/mm = 596.1 MN/m
Step 2: Member Compressive Stiffness ( k m k_m k m )
Using the symmetrical back-to-back frustum formula with t = 30.0 mm t = 30.0\text{ mm} t = 30.0 mm , l = 60.0 mm l = 60.0\text{ mm} l = 60.0 mm , d = 16.0 mm d = 16.0\text{ mm} d = 16.0 mm , d w = 1.5 d = 24.0 mm d_w = 1.5 d = 24.0\text{ mm} d w = 1.5 d = 24.0 mm , and α = 30 ∘ \alpha = 30^\circ α = 3 0 ∘ ( tan 30 ∘ = 0.57735 \tan 30^\circ = 0.57735 tan 3 0 ∘ = 0.57735 ): k m = π E m d tan 30 ∘ 2 ln [ ( l tan 30 ∘ + d w − d ) ( d w + d ) ( l tan 30 ∘ + d w + d ) ( d w − d ) ] k_m = \frac{\pi E_m d \tan 30^\circ}{2 \ln\left[ \frac{(l \tan 30^\circ + d_w - d)(d_w + d)}{(l \tan 30^\circ + d_w + d)(d_w - d)} \right]} k m = 2 ln [ ( l t a n 3 0 ∘ + d w + d ) ( d w − d ) ( l t a n 3 0 ∘ + d w − d ) ( d w + d ) ] π E m d tan 3 0 ∘
Compute numerator: Num = π × ( 207 × 10 3 N/mm 2 ) × 16.0 mm × 0.57735 = 6.0073 × 10 6 N/mm \text{Num} = \pi \times (207 \times 10^3\text{ N/mm}^2) \times 16.0\text{ mm} \times 0.57735 = 6.0073 \times 10^6\text{ N/mm} Num = π × ( 207 × 1 0 3 N/mm 2 ) × 16.0 mm × 0.57735 = 6.0073 × 1 0 6 N/mm
Compute argument of the natural logarithm: l tan 30 ∘ = 60.0 × 0.57735 = 34.641 mm l \tan 30^\circ = 60.0 \times 0.57735 = 34.641\text{ mm} l tan 3 0 ∘ = 60.0 × 0.57735 = 34.641 mm d w − d = 24.0 − 16.0 = 8.0 mm , d w + d = 24.0 + 16.0 = 40.0 mm d_w - d = 24.0 - 16.0 = 8.0\text{ mm}, \quad d_w + d = 24.0 + 16.0 = 40.0\text{ mm} d w − d = 24.0 − 16.0 = 8.0 mm , d w + d = 24.0 + 16.0 = 40.0 mm Arg = ( 34.641 + 8.0 ) ( 40.0 ) ( 34.641 + 40.0 ) ( 8.0 ) = ( 42.641 ) ( 40.0 ) ( 74.641 ) ( 8.0 ) = 1705.64 597.13 = 2.8564 \text{Arg} = \frac{(34.641 + 8.0)(40.0)}{(34.641 + 40.0)(8.0)} = \frac{(42.641)(40.0)}{(74.641)(8.0)} = \frac{1705.64}{597.13} = 2.8564 Arg = ( 34.641 + 40.0 ) ( 8.0 ) ( 34.641 + 8.0 ) ( 40.0 ) = ( 74.641 ) ( 8.0 ) ( 42.641 ) ( 40.0 ) = 597.13 1705.64 = 2.8564
Compute denominator: Denom = 2 × ln ( 2.8564 ) = 2 × 1.04956 = 2.0991 \text{Denom} = 2 \times \ln(2.8564) = 2 \times 1.04956 = 2.0991 Denom = 2 × ln ( 2.8564 ) = 2 × 1.04956 = 2.0991
Calculate k m k_m k m : k m = 6.0073 × 10 6 2.0991 = 2.8618 × 10 6 N/mm = 2 , 861.8 MN/m k_m = \frac{6.0073 \times 10^6}{2.0991} = 2.8618 \times 10^6\text{ N/mm} = 2,861.8\text{ MN/m} k m = 2.0991 6.0073 × 1 0 6 = 2.8618 × 1 0 6 N/mm = 2 , 861.8 MN/m
Step 3: Joint Stiffness Constant ( C C C ) C = k b k b + k m = 596.1 596.1 + 2 , 861.8 = 596.1 3 , 457.9 = 0.1724 ≈ 0.172 C = \frac{k_b}{k_b + k_m} = \frac{596.1}{596.1 + 2,861.8} = \frac{596.1}{3,457.9} = 0.1724 \approx 0.172 C = k b + k m k b = 596.1 + 2 , 861.8 596.1 = 3 , 457.9 596.1 = 0.1724 ≈ 0.172
(The bolt absorbs only 17.2 % 17.2\% 17.2% of the applied external tensile load).
Step 4: Recommended Preload ( F i F_i F i )
Proof load for M16 Class 10.9: F p = A t S p = 157.0 mm 2 × 830 N/mm 2 = 130 , 310 N = 130.31 kN F_p = A_t S_p = 157.0\text{ mm}^2 \times 830\text{ N/mm}^2 = 130,310\text{ N} = 130.31\text{ kN} F p = A t S p = 157.0 mm 2 × 830 N/mm 2 = 130 , 310 N = 130.31 kN
Reusable preload ( 75 % 75\% 75% of proof load): F i = 0.75 F p = 0.75 × 130.31 kN = 97.73 kN = 97 , 730 N F_i = 0.75 F_p = 0.75 \times 130.31\text{ kN} = 97.73\text{ kN} = 97,730\text{ N} F i = 0.75 F p = 0.75 × 130.31 kN = 97.73 kN = 97 , 730 N
Step 5: Bolt and Member Forces Under Peak Service Load ( P max = 32.0 kN P_{\max} = 32.0\text{ kN} P m a x = 32.0 kN )
Maximum bolt force: F b , max = F i + C P max = 97.73 kN + 0.1724 ( 32.0 kN ) = 97.73 + 5.52 = 103.25 kN F_{b,\max} = F_i + C P_{\max} = 97.73\text{ kN} + 0.1724(32.0\text{ kN}) = 97.73 + 5.52 = 103.25\text{ kN} F b , m a x = F i + C P m a x = 97.73 kN + 0.1724 ( 32.0 kN ) = 97.73 + 5.52 = 103.25 kN
Minimum member clamping force: F m , min = F i − ( 1 − C ) P max = 97.73 kN − ( 1 − 0.1724 ) ( 32.0 kN ) = 97.73 − 26.48 = 71.25 kN F_{m,\min} = F_i - (1 - C) P_{\max} = 97.73\text{ kN} - (1 - 0.1724)(32.0\text{ kN}) = 97.73 - 26.48 = 71.25\text{ kN} F m , m i n = F i − ( 1 − C ) P m a x = 97.73 kN − ( 1 − 0.1724 ) ( 32.0 kN ) = 97.73 − 26.48 = 71.25 kN
Step 6: Factors of Safety Against Separation and Yielding
Separation Factor of Safety ( n sep n_{\text{sep}} n sep ): n sep = F i ( 1 − C ) P max = 97.73 kN 26.48 kN = 3.69 n_{\text{sep}} = \frac{F_i}{(1 - C) P_{\max}} = \frac{97.73\text{ kN}}{26.48\text{ kN}} = 3.69 n sep = ( 1 − C ) P m a x F i = 26.48 kN 97.73 kN = 3.69
(Joint has an excellent margin against leakage or separation; n sep = 3.69 ≫ 1.5 n_{\text{sep}} = 3.69 \gg 1.5 n sep = 3.69 ≫ 1.5 ).
Bolt Yield Factor of Safety ( n y n_y n y ): n y = S p A t F b , max = 130.31 kN 103.25 kN = 1.26 n_y = \frac{S_p A_t}{F_{b,\max}} = \frac{130.31\text{ kN}}{103.25\text{ kN}} = 1.26 n y = F b , m a x S p A t = 103.25 kN 130.31 kN = 1.26
Step 7: Fatigue Analysis (Modified Goodman Criterion)
Alternating stress amplitude ( σ a \sigma_a σ a ): σ a = C ( P max − P min ) 2 A t = 0.1724 × ( 32 , 000 N − 0 ) 2 × 157.0 mm 2 = 5 , 516.8 N 314.0 mm 2 = 17.57 MPa \sigma_a = \frac{C (P_{\max} - P_{\min})}{2 A_t} = \frac{0.1724 \times (32,000\text{ N} - 0)}{2 \times 157.0\text{ mm}^2} = \frac{5,516.8\text{ N}}{314.0\text{ mm}^2} = 17.57\text{ MPa} σ a = 2 A t C ( P m a x − P m i n ) = 2 × 157.0 mm 2 0.1724 × ( 32 , 000 N − 0 ) = 314.0 mm 2 5 , 516.8 N = 17.57 MPa
Mean stress ( σ m \sigma_m σ m ): σ m = F i A t + σ a = 97 , 730 N 157.0 mm 2 + 17.57 MPa = 622.48 MPa + 17.57 MPa = 640.05 MPa \sigma_m = \frac{F_i}{A_t} + \sigma_a = \frac{97,730\text{ N}}{157.0\text{ mm}^2} + 17.57\text{ MPa} = 622.48\text{ MPa} + 17.57\text{ MPa} = 640.05\text{ MPa} σ m = A t F i + σ a = 157.0 mm 2 97 , 730 N + 17.57 MPa = 622.48 MPa + 17.57 MPa = 640.05 MPa
Evaluate Goodman safety factor ( n f n_f n f ) with S e = 150 MPa S_e = 150\text{ MPa} S e = 150 MPa and S u t = 1 , 000 MPa S_{ut} = 1,000\text{ MPa} S u t = 1 , 000 MPa : σ a S e + σ m S u t = 1 n f \frac{\sigma_a}{S_e} + \frac{\sigma_m}{S_{ut}} = \frac{1}{n_f} S e σ a + S u t σ m = n f 1 17.57 MPa 150.0 MPa + 640.05 MPa 1 , 000.0 MPa = 0.1171 + 0.6401 = 0.7572 \frac{17.57\text{ MPa}}{150.0\text{ MPa}} + \frac{640.05\text{ MPa}}{1,000.0\text{ MPa}} = 0.1171 + 0.6401 = 0.7572 150.0 MPa 17.57 MPa + 1 , 000.0 MPa 640.05 MPa = 0.1171 + 0.6401 = 0.7572 n f = 1 0.7572 = 1.32 n_f = \frac{1}{0.7572} = 1.32 n f = 0.7572 1 = 1.32
Because n f = 1.32 > 1.0 n_f = 1.32 > 1.0 n f = 1.32 > 1.0 , the preloaded cylinder head joint will survive infinite fatigue life under continuous cyclic pressure pulses.
Note
The check above draws the Goodman load line from the origin, which is conservative. Because the preload stays constant while only the external load cycles, Shigley measures the margin along a load line that starts at the preload stress σ i = F i / A t \sigma_i = F_i/A_t σ i = F i / A t :
n f = S e ( S u t − σ i ) S u t σ a + S e ( σ m − σ i ) = 150 ( 1,000 − 622.48 ) 1,000 ( 17.57 ) + 150 ( 17.57 ) = 56,628 20,206 = 2.80 n_f = \frac{S_e (S_{ut} - \sigma_i)}{S_{ut} \sigma_a + S_e(\sigma_m - \sigma_i)} = \frac{150(1{,}000 - 622.48)}{1{,}000(17.57) + 150(17.57)} = \frac{56{,}628}{20{,}206} = 2.80 n f = S u t σ a + S e ( σ m − σ i ) S e ( S u t − σ i ) = 1 , 000 ( 17.57 ) + 150 ( 17.57 ) 150 ( 1 , 000 − 622.48 ) = 20 , 206 56 , 628 = 2.80
Use whichever method the problem specifies; both confirm that the joint is safe.