Study guide
9.3 Helical, Bevel & Worm Gearing
PE Mechanical: Machine Design and Materials Exam
Track your progress as you read
Finished sections get a check mark.
1 Chapter 1: Basic Engineering Practice: Drawings, Economics & Design Methodology
1.1 Engineering Terms, Symbols, Drawing Interpretation & Conventions 1.2 Project Management & Engineering Economics 1.3 Design Methodology, Risk Assessment & Safety
2 Chapter 2: Physical & Mechanical Properties of Engineering Materials
2.1 Stress-Strain Relationships & Fundamental Mechanical Properties 2.2 Physical Properties, Temperature Effects, Hardness, Impact Toughness & Creep
3 Chapter 3: Mechanics of Materials: Fundamental Loadings & Deflections
3.1 Axial Loading, Normal Stress & Statically Indeterminate Members 3.2 Direct Shear, Bearing & Transverse Shear in Beams 3.3 Torsion of Shafts, Power Transmission & Thin-Walled Tubes 3.4 Beam Bending Stresses & Deflection Analysis
4 Chapter 4: Mechanics of Materials: Stability, Multiaxial Stress & Thermal Effects
4.1 Column Buckling & Elastic/Inelastic Instability 4.2 Combined Loading, Principal Stresses & Mohr's Circle 4.3 Thermal Stresses & Interference Stresses
5 Chapter 5: Failure Theories: Static Yielding & Fracture Mechanics
5.1 Static Failure Theories for Ductile Materials: von Mises & Tresca 5.2 Static Failure Theories for Brittle Materials & Fracture Mechanics
6 Chapter 6: Fatigue Analysis & Dynamic Failure
6.1 High-Cycle Fatigue, S-N Curves & Marin Modifying Factors 6.2 Fluctuating Stresses, Failure Criteria & Cumulative Damage
7 Chapter 7: Mechanical Attachments: Fasteners & Bolted Joints
7.1 Threaded Fasteners, Proof Strength & Preload Mechanics 7.2 Bolted Joint Stiffness, External Loading & Separation 7.3 Non-Threaded Fasteners: Keys, Pins, Clevises, Retaining Rings, Rivets, Lugs & Anchors
8 Chapter 8: Mechanical Attachments: Permanent Joints & Bonding
8.1 Welded Joints & Weld Group Stress Analysis 8.2 Brazing, Soldering & Structural Adhesive Bonding
9 Chapter 9: Power Transmission: Shafts & Gearing
9.1 Transmission Shaft Design, Critical Speeds & Deflection 9.2 Spur Gears: Geometry, Kinematics & AGMA Stress Equations 9.3 Helical, Bevel & Worm Gearing
10 Chapter 10: Power Transmission: Bearings, Flexible Drives, Friction Devices & Prime Movers
10.1 Rolling-Element Bearings & L10 Life Calculations 10.2 Hydrodynamic Journal Bearings & Lubrication Regimes 10.3 Belts, Roller Chains & Flexible Drives 10.4 Clutches, Brakes & Power Screws 10.5 Electric Motors, Engines & Flywheels
11 Chapter 11: Mechanical Components: Pressure Vessels & Structural Systems
11.1 Pressure Vessels & Piping: Thin and Thick Walls, ASME VIII and B31 11.2 Mechanical Springs: Helical, Belleville & Leaf Springs 11.3 Structural Trusses, Rigid Frames & Energy Methods
12 Chapter 12: Mechanical Dynamics, Vibrations & Fluid Power
12.1 Single-Degree-of-Freedom Vibrations & Resonance 12.2 Vibration Isolation, Multi-DOF Systems & Transmissibility 12.3 Fluid Power Systems: Hydraulics & Pneumatics
13 Chapter 13: Kinematics, Mechatronics & Control Systems
13.1 Mechanism Kinematics, Linkages, Cams & Simple Machines 13.2 Basic Mechatronics, Sensors & Closed-Loop Controls
14 Chapter 14: Supportive Knowledge: Fits, Tolerances & Manufacturing Methods
14.1 Limits, Fits & Geometric Dimensioning & Tolerancing (GD&T) 14.2 Manufacturing Methods, Machinability, Heat Treatment & Assembly
15 Chapter 15: Supportive Knowledge: Codes, Computation, Testing & Corrosion
15.1 Engineering Codes & Standards 15.2 Computational Methods: FEA & Numerical Analysis 15.3 Instrumentation, Testing, Inspection & Quality 15.4 Chemical Processes: Corrosion, Oxidation & Embrittlement
9.3 Helical, Bevel & Worm Gearing
Key Takeaways Explain This Topic AI
Helical gears generate axial thrust loads W a = W t tan ψ W_a = W_t \tan \psi W a = W t tan ψ along their shafts in addition to radial forces W r = W t tan ϕ t W_r = W_t \tan \phi_t W r = W t tan ϕ t ; thrust loads can be cancelled internally using double-helical (herringbone) tooth geometry.
In helical gear geometry, the normal pitch and transverse pitch are linked by the helix angle: p n = p t cos ψ p_n = p_t \cos \psi p n = p t cos ψ , and normal vs. transverse pressure angles follow tan ϕ n = tan ϕ t cos ψ \tan \phi_n = \tan \phi_t \cos \psi tan ϕ n = tan ϕ t cos ψ .
Straight bevel gear teeth transmit forces at the mid-face average pitch radius; on a 90 ∘ 90^\circ 9 0 ∘ shaft arrangement, the pinion axial thrust force equals the gear radial separating force ( W a , P = W r , G W_{a,P} = W_{r,G} W a , P = W r , G ), and vice versa.
Worm gearing operates via continuous sliding engagement, yielding high single-stage speed reduction ratios ( m v = N G / N w m_v = N_G / N_w m v = N G / N w ) but lower mechanical efficiencies ( η = 60 % − 90 % \eta = 60\% - 90\% η = 60% − 90% ) requiring rigorous thermal dissipation checks.
A worm gearset is statically self-locking when the tangent of the lead angle is less than the static coefficient of friction ( tan λ < f static \tan \lambda < f_{\text{static}} tan λ < f static , typically λ ≤ 5 ∘ \lambda \le 5^\circ λ ≤ 5 ∘ ); however, vibration can cause backdriving, mandating mechanical holding brakes in hoists.
Last updated: October 2026
9.3 Helical, Bevel & Worm Gearing
When power transmission requires higher load capacities, quieter operation at elevated speeds, or non-parallel shaft orientations, mechanical systems transition from spur gears to helical, bevel, or worm gearing. Sizing these gears requires resolving three-dimensional tooth reaction forces into tangential, radial, and axial thrust components to ensure proper shaft and bearing selection.
1. Helical Gears: Geometry & 3D Force Resolution
Helical gear teeth are inclined at a helix angle ψ \psi ψ (typically 15 ∘ 15^\circ 1 5 ∘ to 30 ∘ 30^\circ 3 0 ∘ ) relative to the shaft axis of rotation. Because contact initiates at one end of the tooth and progresses smoothly across the face width, helical gears engage more quietly and support higher loads than spur gears. [Transverse Plane] [Normal Plane (Perpendicular to Helix)]
- | /
- | /
- | ψ /
- | <---------- /
- v v
- +-----------+ +-----------+
- | p_t | | p_n |
- +-----------+ +-----------+
- Geometric Identity: p_n = p_t * cos(ψ)
- Normal Pitch: P_n = P_t / cos(ψ)
- Pressure Angle: tan(φ_n) = tan(φ_t) * cos(ψ)
- Geometric Relationships: Transverse vs. Normal Planes
Pitch Relationships : p n = p t cos ψ p_n = p_t \cos \psi p n = p t cos ψ , P n = P t / cos ψ P_n = P_t / \cos \psi P n = P t / cos ψ , m n = m t cos ψ m_n = m_t \cos \psi m n = m t cos ψ .
Pitch Diameter : d = N / P t = N / ( P n cos ψ ) = m n N / cos ψ d = N / P_t = N / (P_n \cos \psi) = m_n N / \cos \psi d = N / P t = N / ( P n cos ψ ) = m n N / cos ψ .
Pressure Angles : tan ϕ n = tan ϕ t cos ψ ⟹ tan ϕ t = tan ϕ n cos ψ \tan \phi_n = \tan \phi_t \cos \psi \implies \tan \phi_t = \frac{\tan \phi_n}{\cos \psi} tan ϕ n = tan ϕ t cos ψ ⟹ tan ϕ t = c o s ψ t a n ϕ n .
Axial Pitch ( p x p_x p x ) : Distance between corresponding points on adjacent teeth parallel to shaft axis: p x = p t / tan ψ p_x = p_t / \tan \psi p x = p t / tan ψ .
Face Contact Ratio ( m F m_F m F ) : To ensure smooth helical tooth engagement, the face width F F F must satisfy m F = F / p x = F tan ψ / p t ≥ 1.15 m_F = F / p_x = F \tan \psi / p_t \ge 1.15 m F = F / p x = F tan ψ / p t ≥ 1.15 .
Virtual / Equivalent Number of Teeth ( N ′ N' N ′ ) : When selecting tooth-cutting tools or evaluating Lewis/AGMA geometry factors, the tooth form in the normal plane corresponds to an equivalent spur gear with tooth count: N ′ = N cos 3 ψ N' = \frac{N}{\cos^3 \psi} N ′ = cos 3 ψ N
3D Force Decomposition on Helical Gears
The total normal contact force W W W acting normal to the helical tooth surface decomposes into three orthogonal components: W t = 2 T d (Tangential transmitted load) W_t = \frac{2 T}{d} \quad \text{(Tangential transmitted load)} W t = d 2 T (Tangential transmitted load) W r = W t tan ϕ t = W t tan ϕ n cos ψ (Radial separating load) W_r = W_t \tan \phi_t = W_t \frac{\tan \phi_n}{\cos \psi} \quad \text{(Radial separating load)} W r = W t tan ϕ t = W t cos ψ tan ϕ n (Radial separating load) W a = W t tan ψ (Axial thrust load) W_a = W_t \tan \psi \quad \text{(Axial thrust load)} W a = W t tan ψ (Axial thrust load) W = W t cos ϕ n cos ψ (Resultant normal load) W = \frac{W_t}{\cos \phi_n \cos \psi} \quad \text{(Resultant normal load)} W = cos ϕ n cos ψ W t (Resultant normal load)
Warning
Helical gears produce substantial axial thrust loads ( W a W_a W a ) that must be carried by tapered roller or angular contact bearings. To eliminate external thrust loads on drive shafts, engineers utilize double-helical or herringbone gears , where opposing left-hand and right-hand helices cancel axial forces internally.
2. Straight Bevel Gears: Geometry & Forces
Bevel gears transmit power between intersecting shafts (most commonly oriented at a shaft angle of Σ = 90 ∘ \Sigma = 90^\circ Σ = 9 0 ∘ ). The rolling surfaces are cones rather than cylinders. Apex
- /\
- / \
- / \
- / A_0 \ Cone Distance: A_0 = d_P / [2 * sin(γ)]
- / \
- / \
- +------/ \------+
- | Pinion (γ) Gear (Γ) |
- +--------------------------+
- Shaft Angle: Σ = γ + Γ = 90°
- Pinion Pitch Cone Angle: tan(γ) = N_P / N_G = 1 / m_G
- Gear Pitch Cone Angle: tan(Γ) = N_G / N_P = m_G
- Geometric Proportions & Face Width Limit
Pitch cone distance: A 0 = d P 2 sin γ = d G 2 sin Γ A_0 = \frac{d_P}{2 \sin \gamma} = \frac{d_G}{2 \sin \Gamma} A 0 = 2 s i n γ d P = 2 s i n Γ d G .
Maximum face width constraint: To avoid excessively thin teeth at the small end of the cone, the face width F F F must satisfy: F ≤ min ( A 0 3 , 10 P d ) F \le \min\left( \frac{A_0}{3}, \frac{10}{P_d} \right) F ≤ min ( 3 A 0 , P d 10 )
Tredgold's approximation defines the virtual tooth count: N ′ = N / cos γ N' = N / \cos \gamma N ′ = N / cos γ .
Force Resolution on Straight Bevel Pinions
Because the tooth tapers toward the apex, resultant forces are evaluated at the mid-face average pitch radius r avg r_{\text{avg}} r avg : r avg = r − F sin γ 2 = d P 2 ( 1 − F 2 A 0 ) r_{\text{avg}} = r - \frac{F \sin \gamma}{2} = \frac{d_P}{2} \left( 1 - \frac{F}{2 A_0} \right) r avg = r − 2 F sin γ = 2 d P ( 1 − 2 A 0 F ) W t = T P r avg (Tangential load) W_t = \frac{T_P}{r_{\text{avg}}} \quad \text{(Tangential load)} W t = r avg T P (Tangential load) W r = W t tan ϕ cos γ (Radial separating load on pinion) W_r = W_t \tan \phi \cos \gamma \quad \text{(Radial separating load on pinion)} W r = W t tan ϕ cos γ (Radial separating load on pinion) W a = W t tan ϕ sin γ (Axial thrust load on pinion) W_a = W_t \tan \phi \sin \gamma \quad \text{(Axial thrust load on pinion)} W a = W t tan ϕ sin γ (Axial thrust load on pinion)
Force Interaction on Perpendicular Shafts ( Σ = 90 ∘ \Sigma = 90^\circ Σ = 9 0 ∘ )
Because the pinion and gear shafts are perpendicular, Newton's third law links the radial and thrust reactions: W t , G = W t , P W_{t,G} = W_{t,P} W t , G = W t , P W r , G = W a , P (Pinion thrust becomes gear radial load) W_{r,G} = W_{a,P} \quad \text{(Pinion thrust becomes gear radial load)} W r , G = W a , P (Pinion thrust becomes gear radial load) W a , G = W r , P (Pinion radial load becomes gear thrust load) W_{a,G} = W_{r,P} \quad \text{(Pinion radial load becomes gear thrust load)} W a , G = W r , P (Pinion radial load becomes gear thrust load)
3. Worm Gearing: Kinematics, Forces & Efficiency
Worm gear sets connect non-parallel, non-intersecting shafts (skew axes, typically at 90 ∘ 90^\circ 9 0 ∘ ). The driving worm resembles a power screw, meshing with a conjugated helical gear (the worm gear or wheel). Worm (Driver, N_w starts) -------> [ SKEW 90° ] -------> Worm Gear (Driven, N_G teeth)
- Axial Pitch of Worm (p_x) = Circular Pitch of Gear (p_t)
- Lead: l = p_x * N_w
- Lead Angle: tan(λ) = l / (π * d_w)
- Velocity Ratio: m_v = N_G / N_w (independent of pitch diameters!)
- Force Decomposition with Sliding Friction
The sliding engagement between worm threads and gear teeth creates substantial friction. Resolving the 3D equilibrium with friction coefficient f f f : W t , w = − W a , G = W t , G ( cos ϕ n sin λ + f cos λ cos ϕ n cos λ − f sin λ ) W_{t,w} = -W_{a,G} = W_{t,G} \left( \frac{\cos \phi_n \sin \lambda + f \cos \lambda}{\cos \phi_n \cos \lambda - f \sin \lambda} \right) W t , w = − W a , G = W t , G ( cos ϕ n cos λ − f sin λ cos ϕ n sin λ + f cos λ ) W a , w = − W t , G = 2 T G d G W_{a,w} = -W_{t,G} = \frac{2 T_G}{d_G} W a , w = − W t , G = d G 2 T G W r , w = − W r , G = W t , G sin ϕ n cos ϕ n cos λ − f sin λ W_{r,w} = -W_{r,G} = \frac{W_{t,G} \sin \phi_n}{\cos \phi_n \cos \lambda - f \sin \lambda} W r , w = − W r , G = cos ϕ n cos λ − f sin λ W t , G sin ϕ n
Where ϕ n \phi_n ϕ n is the normal pressure angle and λ \lambda λ is the lead angle.
Sliding Velocity & Efficiency
The pitch-line velocity of the worm is v w = π d w n w / 60 v_w = \pi d_w n_w / 60 v w = π d w n w /60 . Due to the thread helix, the actual relative sliding velocity between surfaces is: v s = v w cos λ = π d w n w 60 cos λ v_s = \frac{v_w}{\cos \lambda} = \frac{\pi d_w n_w}{60 \cos \lambda} v s = cos λ v w = 60 cos λ π d w n w
The mechanical efficiency η \eta η when the worm drives the gear is: η = cos ϕ n − f tan λ cos ϕ n + f cot λ \eta = \frac{\cos \phi_n - f \tan \lambda}{\cos \phi_n + f \cot \lambda} η = cos ϕ n + f cot λ cos ϕ n − f tan λ
Self-Locking Condition & Thermal Rejection
Self-Locking : A worm drive is statically self-locking (cannot be backdriven by torque applied to the worm wheel) when the lead angle is smaller than the friction angle: tan λ < f static ( Typically λ ≤ 5 ∘ to 6 ∘ ) \tan \lambda < f_{\text{static}} \quad (\text{Typically } \lambda \le 5^\circ\text{ to }6^\circ) tan λ < f static ( Typically λ ≤ 5 ∘ to 6 ∘ )
Caution
Self-locking should never serve as the sole safety brake in hoists or elevators. Ambient machinery vibration or dynamic shock loads can dramatically reduce the dynamic coefficient of friction, causing an otherwise self-locking gearset to creep or free-wheel.
Thermal Dissipation Limits : Due to sliding friction, worm gearboxes generate significant heat: H loss = ( 1 − η ) P in H_{\text{loss}} = (1 - \eta) P_{\text{in}} H loss = ( 1 − η ) P in . The continuous power rating of an enclosed worm gearbox is often limited by thermal dissipation rather than mechanical stress: H loss ≤ h cr A ( T oil − T ambient ) H_{\text{loss}} \le h_{\text{cr}} A (T_{\text{oil}} - T_{\text{ambient}}) H loss ≤ h cr A ( T oil − T ambient )
Where h cr h_{\text{cr}} h cr is the combined convective/radiative heat transfer coefficient and A A A is the housing surface area.
- 4. Complete Worked Engineering Problem: Worm Gearbox Design Analysis
- Problem Statement
A single-reduction speed reducer driven by an electric motor incorporates a double-threaded right-hand steel worm ( N w = 2 N_w = 2 N w = 2 ) meshing with a 40-tooth bronze worm gear ( N G = 40 N_G = 40 N G = 40 ). The drive specifications are:
Worm pitch diameter: d w = 50.0 mm = 0.050 m d_w = 50.0\text{ mm} = 0.050\text{ m} d w = 50.0 mm = 0.050 m
Axial pitch of worm: p x = 15.708 mm = 0.015708 m p_x = 15.708\text{ mm} = 0.015708\text{ m} p x = 15.708 mm = 0.015708 m (equivalent to gear circular pitch p t p_t p t )
Normal pressure angle: ϕ n = 20 ∘ \phi_n = 20^\circ ϕ n = 2 0 ∘
Input mechanical power: P = 4.0 kW = 4000 W P = 4.0\text{ kW} = 4000\text{ W} P = 4.0 kW = 4000 W at worm speed n w = 1450 rpm n_w = 1450\text{ rpm} n w = 1450 rpm
- Sliding friction coefficient: f = 0.045 f = 0.045 f = 0.045
- Static friction coefficient: f static = 0.080 f_{\text{static}} = 0.080 f static = 0.080
Perform a comprehensive design analysis: determine lead angle, sliding velocity, mesh efficiency, output torque, 3D reaction forces on both shafts, self-locking status, and thermal heat dissipation rate.
Step 1: Worm Lead & Lead Angle
Calculate lead l l l of the two-start worm: l = p x N w = 15.708 mm × 2 = 31.416 mm = 0.031416 m l = p_x N_w = 15.708\text{ mm} \times 2 = 31.416\text{ mm} = 0.031416\text{ m} l = p x N w = 15.708 mm × 2 = 31.416 mm = 0.031416 m
Calculate lead angle λ \lambda λ : tan λ = l π d w = 31.416 mm π × 50.0 mm = 31.416 157.080 = 0.2000 \tan \lambda = \frac{l}{\pi d_w} = \frac{31.416\text{ mm}}{\pi \times 50.0\text{ mm}} = \frac{31.416}{157.080} = 0.2000 tan λ = π d w l = π × 50.0 mm 31.416 mm = 157.080 31.416 = 0.2000 λ = arctan ( 0.2000 ) = 11.31 ∘ \lambda = \arctan(0.2000) = 11.31^\circ λ = arctan ( 0.2000 ) = 11.3 1 ∘
Step 2: Gear Dimensions & Operating Velocities
Pitch diameter of the worm gear: d G = N G p x π = 40 × 15.708 mm π = 200.0 mm = 0.200 m d_G = \frac{N_G p_x}{\pi} = \frac{40 \times 15.708\text{ mm}}{\pi} = 200.0\text{ mm} = 0.200\text{ m} d G = π N G p x = π 40 × 15.708 mm = 200.0 mm = 0.200 m
Gear rotational speed: n G = n w ( N w N G ) = 1450 × ( 2 40 ) = 72.5 rpm n_G = n_w \left(\frac{N_w}{N_G}\right) = 1450 \times \left(\frac{2}{40}\right) = 72.5\text{ rpm} n G = n w ( N G N w ) = 1450 × ( 40 2 ) = 72.5 rpm
Pitch line velocity of the worm: v w = π d w n w 60 = π × 0.050 m × 1450 rpm 60 = 3.796 m/s v_w = \frac{\pi d_w n_w}{60} = \frac{\pi \times 0.050\text{ m} \times 1450\text{ rpm}}{60} = 3.796\text{ m/s} v w = 60 π d w n w = 60 π × 0.050 m × 1450 rpm = 3.796 m/s
Relative tooth sliding velocity: v s = v w cos λ = 3.796 m/s cos ( 11.31 ∘ ) = 3.796 0.9806 = 3.871 m/s v_s = \frac{v_w}{\cos \lambda} = \frac{3.796\text{ m/s}}{\cos(11.31^\circ)} = \frac{3.796}{0.9806} = 3.871\text{ m/s} v s = cos λ v w = cos ( 11.3 1 ∘ ) 3.796 m/s = 0.9806 3.796 = 3.871 m/s
Step 3: Mesh Efficiency & Input Torque
Evaluate mesh efficiency η \eta η using cos ϕ n = cos 20 ∘ = 0.9397 \cos \phi_n = \cos 20^\circ = 0.9397 cos ϕ n = cos 2 0 ∘ = 0.9397 , tan λ = 0.2000 \tan \lambda = 0.2000 tan λ = 0.2000 , and cot λ = 5.000 \cot \lambda = 5.000 cot λ = 5.000 : η = cos ϕ n − f tan λ cos ϕ n + f cot λ = 0.9397 − ( 0.045 × 0.2000 ) 0.9397 + ( 0.045 × 5.000 ) = 0.9397 − 0.0090 0.9397 + 0.2250 = 0.9307 1.1647 = 0.7991 ≈ 79.91 % \eta = \frac{\cos \phi_n - f \tan \lambda}{\cos \phi_n + f \cot \lambda} = \frac{0.9397 - (0.045 \times 0.2000)}{0.9397 + (0.045 \times 5.000)} = \frac{0.9397 - 0.0090}{0.9397 + 0.2250} = \frac{0.9307}{1.1647} = 0.7991 \approx 79.91\% η = cos ϕ n + f cot λ cos ϕ n − f tan λ = 0.9397 + ( 0.045 × 5.000 ) 0.9397 − ( 0.045 × 0.2000 ) = 0.9397 + 0.2250 0.9397 − 0.0090 = 1.1647 0.9307 = 0.7991 ≈ 79.91%
Input torque delivered to the worm shaft: ω w = 1450 × 2 π 60 = 151.84 rad/s \omega_w = \frac{1450 \times 2\pi}{60} = 151.84\text{ rad/s} ω w = 60 1450 × 2 π = 151.84 rad/s T w = P ω w = 4000 W 151.84 rad/s = 26.34 N ⋅ m T_w = \frac{P}{\omega_w} = \frac{4000\text{ W}}{151.84\text{ rad/s}} = 26.34\text{ N}\cdot\text{m} T w = ω w P = 151.84 rad/s 4000 W = 26.34 N ⋅ m
Step 4: Three-Dimensional Force Decomposition
Tangential transmitted force driving the worm: W t , w = 2 T w d w = 2 × 26.34 N ⋅ m 0.050 m = 1053.6 N W_{t,w} = \frac{2 T_w}{d_w} = \frac{2 \times 26.34\text{ N}\cdot\text{m}}{0.050\text{ m}} = 1053.6\text{ N} W t , w = d w 2 T w = 0.050 m 2 × 26.34 N ⋅ m = 1053.6 N
Axial thrust force developed on the worm shaft (which directly drives the worm gear tangentially): W a , w = W t , w η tan λ = 1053.6 N × 0.7991 0.2000 = 4210.0 N W_{a,w} = \frac{W_{t,w} \eta}{\tan \lambda} = \frac{1053.6\text{ N} \times 0.7991}{0.2000} = 4210.0\text{ N} W a , w = tan λ W t , w η = 0.2000 1053.6 N × 0.7991 = 4210.0 N
Radial separating force between worm and gear shafts: W r = W t , w sin ϕ n cos ϕ n sin λ + f cos λ = 1053.6 × 0.3420 ( 0.9397 × 0.1961 ) + ( 0.045 × 0.9806 ) = 360.33 0.1843 + 0.0441 = 360.33 0.2284 = 1577.6 N W_r = \frac{W_{t,w} \sin \phi_n}{\cos \phi_n \sin \lambda + f \cos \lambda} = \frac{1053.6 \times 0.3420}{(0.9397 \times 0.1961) + (0.045 \times 0.9806)} = \frac{360.33}{0.1843 + 0.0441} = \frac{360.33}{0.2284} = 1577.6\text{ N} W r = cos ϕ n sin λ + f cos λ W t , w sin ϕ n = ( 0.9397 × 0.1961 ) + ( 0.045 × 0.9806 ) 1053.6 × 0.3420 = 0.1843 + 0.0441 360.33 = 0.2284 360.33 = 1577.6 N
Step 5: Output Torque & Reaction Forces on Gear Shaft
Tangential force on gear: W t , G = W a , w = 4210.0 N W_{t,G} = W_{a,w} = 4210.0\text{ N} W t , G = W a , w = 4210.0 N
Axial thrust force on gear: W a , G = W t , w = 1053.6 N W_{a,G} = W_{t,w} = 1053.6\text{ N} W a , G = W t , w = 1053.6 N
Radial force on gear: W r , G = W r = 1577.6 N W_{r,G} = W_r = 1577.6\text{ N} W r , G = W r = 1577.6 N
Output torque delivered by the worm wheel shaft: T G = W t , G ( d G 2 ) = 4210.0 N × 0.100 m = 421.0 N ⋅ m T_G = W_{t,G} \left(\frac{d_G}{2}\right) = 4210.0\text{ N} \times 0.100\text{ m} = 421.0\text{ N}\cdot\text{m} T G = W t , G ( 2 d G ) = 4210.0 N × 0.100 m = 421.0 N ⋅ m
Check power balance: P out = T G ω G = 421.0 N ⋅ m × ( 72.5 × 2 π 60 rad/s ) = 421.0 × 7.592 = 3196.2 W = 3.20 kW P_{\text{out}} = T_G \omega_G = 421.0\text{ N}\cdot\text{m} \times \left(\frac{72.5 \times 2\pi}{60}\text{ rad/s}\right) = 421.0 \times 7.592 = 3196.2\text{ W} = 3.20\text{ kW} P out = T G ω G = 421.0 N ⋅ m × ( 60 72.5 × 2 π rad/s ) = 421.0 × 7.592 = 3196.2 W = 3.20 kW P out P in = 3196.2 W 4000 W = 0.7991 ( Matches calculated η = 79.91 % ) \frac{P_{\text{out}}}{P_{\text{in}}} = \frac{3196.2\text{ W}}{4000\text{ W}} = 0.7991 \quad (\text{Matches calculated } \eta = 79.91\%) P in P out = 4000 W 3196.2 W = 0.7991 ( Matches calculated η = 79.91% )
Step 6: Self-Locking & Thermal Rejection Evaluation
Self-Locking Verification : tan λ = 0.2000 \tan \lambda = 0.2000 tan λ = 0.2000 , whereas f static = 0.080 f_{\text{static}} = 0.080 f static = 0.080 .
Because tan λ = 0.2000 > f static = 0.080 \tan \lambda = 0.2000 > f_{\text{static}} = 0.080 tan λ = 0.2000 > f static = 0.080 , the drive is backdrivable and NOT self-locking . An external mechanical brake must be incorporated if the application requires load holding.
Thermal Dissipation Requirement :
Heat generated by sliding friction: H loss = ( 1 − η ) P in = ( 1 − 0.7991 ) × 4000 W = 803.6 W = 0.804 kW H_{\text{loss}} = (1 - \eta) P_{\text{in}} = (1 - 0.7991) \times 4000\text{ W} = 803.6\text{ W} = 0.804\text{ kW} H loss = ( 1 − η ) P in = ( 1 − 0.7991 ) × 4000 W = 803.6 W = 0.804 kW
The gearbox housing and cooling ribs must be sized to continuously dissipate 804 W 804\text{ W} 804 W to maintain the lubricant sump temperature below 90 ∘ C 90^\circ\text{C} 9 0 ∘ C .