Study guide
9.1 Transmission Shaft Design, Critical Speeds & Deflection
PE Mechanical: Machine Design and Materials Exam
Track your progress as you read
Finished sections get a check mark.
1 Chapter 1: Basic Engineering Practice: Drawings, Economics & Design Methodology
1.1 Engineering Terms, Symbols, Drawing Interpretation & Conventions 1.2 Project Management & Engineering Economics 1.3 Design Methodology, Risk Assessment & Safety
2 Chapter 2: Physical & Mechanical Properties of Engineering Materials
2.1 Stress-Strain Relationships & Fundamental Mechanical Properties 2.2 Physical Properties, Temperature Effects, Hardness, Impact Toughness & Creep
3 Chapter 3: Mechanics of Materials: Fundamental Loadings & Deflections
3.1 Axial Loading, Normal Stress & Statically Indeterminate Members 3.2 Direct Shear, Bearing & Transverse Shear in Beams 3.3 Torsion of Shafts, Power Transmission & Thin-Walled Tubes 3.4 Beam Bending Stresses & Deflection Analysis
4 Chapter 4: Mechanics of Materials: Stability, Multiaxial Stress & Thermal Effects
4.1 Column Buckling & Elastic/Inelastic Instability 4.2 Combined Loading, Principal Stresses & Mohr's Circle 4.3 Thermal Stresses & Interference Stresses
5 Chapter 5: Failure Theories: Static Yielding & Fracture Mechanics
5.1 Static Failure Theories for Ductile Materials: von Mises & Tresca 5.2 Static Failure Theories for Brittle Materials & Fracture Mechanics
6 Chapter 6: Fatigue Analysis & Dynamic Failure
6.1 High-Cycle Fatigue, S-N Curves & Marin Modifying Factors 6.2 Fluctuating Stresses, Failure Criteria & Cumulative Damage
7 Chapter 7: Mechanical Attachments: Fasteners & Bolted Joints
7.1 Threaded Fasteners, Proof Strength & Preload Mechanics 7.2 Bolted Joint Stiffness, External Loading & Separation 7.3 Non-Threaded Fasteners: Keys, Pins, Clevises, Retaining Rings, Rivets, Lugs & Anchors
8 Chapter 8: Mechanical Attachments: Permanent Joints & Bonding
8.1 Welded Joints & Weld Group Stress Analysis 8.2 Brazing, Soldering & Structural Adhesive Bonding
9 Chapter 9: Power Transmission: Shafts & Gearing
9.1 Transmission Shaft Design, Critical Speeds & Deflection 9.2 Spur Gears: Geometry, Kinematics & AGMA Stress Equations 9.3 Helical, Bevel & Worm Gearing
10 Chapter 10: Power Transmission: Bearings, Flexible Drives, Friction Devices & Prime Movers
10.1 Rolling-Element Bearings & L10 Life Calculations 10.2 Hydrodynamic Journal Bearings & Lubrication Regimes 10.3 Belts, Roller Chains & Flexible Drives 10.4 Clutches, Brakes & Power Screws 10.5 Electric Motors, Engines & Flywheels
11 Chapter 11: Mechanical Components: Pressure Vessels & Structural Systems
11.1 Pressure Vessels & Piping: Thin and Thick Walls, ASME VIII and B31 11.2 Mechanical Springs: Helical, Belleville & Leaf Springs 11.3 Structural Trusses, Rigid Frames & Energy Methods
12 Chapter 12: Mechanical Dynamics, Vibrations & Fluid Power
12.1 Single-Degree-of-Freedom Vibrations & Resonance 12.2 Vibration Isolation, Multi-DOF Systems & Transmissibility 12.3 Fluid Power Systems: Hydraulics & Pneumatics
13 Chapter 13: Kinematics, Mechatronics & Control Systems
13.1 Mechanism Kinematics, Linkages, Cams & Simple Machines 13.2 Basic Mechatronics, Sensors & Closed-Loop Controls
14 Chapter 14: Supportive Knowledge: Fits, Tolerances & Manufacturing Methods
14.1 Limits, Fits & Geometric Dimensioning & Tolerancing (GD&T) 14.2 Manufacturing Methods, Machinability, Heat Treatment & Assembly
15 Chapter 15: Supportive Knowledge: Codes, Computation, Testing & Corrosion
15.1 Engineering Codes & Standards 15.2 Computational Methods: FEA & Numerical Analysis 15.3 Instrumentation, Testing, Inspection & Quality 15.4 Chemical Processes: Corrosion, Oxidation & Embrittlement
9.1 Transmission Shaft Design, Critical Speeds & Deflection
Key Takeaways Explain This Topic AI
Transmission shafts experience multiaxial fatigue loading consisting of completely reversed cyclic bending stresses ( M a = M , M m = 0 M_a = M, M_m = 0 M a = M , M m = 0 ) from steady transverse loads combined with steady torsional shear stresses ( T m = T , T a ≈ 0 T_m = T, T_a \approx 0 T m = T , T a ≈ 0 ).
The DE-Goodman shaft equation combines the distortion-energy (von Mises) equivalent stresses with the modified Goodman line to solve directly for the minimum diameter under combined bending and torsion.
Rigidity and slope constraints frequently dictate shaft dimensions over fatigue strength; angular slope must remain below 0.0005 rad 0.0005\text{ rad} 0.0005 rad at spur gear meshes and 0.001 to 0.003 rad 0.001\text{ to }0.003\text{ rad} 0.001 to 0.003 rad at ball bearing seats to prevent catastrophic edge-loading.
Rayleigh-Ritz and Dunkerley methods estimate the first lateral critical whirling speed ω c r \omega_{cr} ω cr ; operational speeds must maintain a minimum 20 % to 25 % 20\%\text{ to }25\% 20% to 25% clearance margin above or below resonance.
In super-critical operation ( ω > 1.4 ω c r \omega > 1.4\omega_{cr} ω > 1.4 ω cr ), the shaft dynamic center self-centers about its center of mass, requiring rapid acceleration through resonance during startup to avoid destructive whirl amplitudes.
Last updated: October 2026
9.1 Transmission Shaft Design, Critical Speeds & Deflection
Transmission shafts serve as the foundational rotating conduits for mechanical power across gearboxes, drivetrains, turbines, and industrial machinery. Sizing a reliable shaft requires simultaneously satisfying multiaxial fatigue endurance criteria, static yield thresholds, strict elastic deflection and angular slope tolerances at bearing and gear interfaces, and dynamic clearance from lateral whirling critical speeds.
1. Shaft Loading Mechanics: Cyclic Bending & Torsion
A rotating shaft supporting power transmission elements (spur gears, helical gears, pulleys, sprockets) is subjected to three-dimensional force systems that induce simultaneous bending moments, torsional moments, and transverse or axial shear loads. [Bearing A] [Gear / Pulley] [Bearing B]
- | | |
- +=====|=====================O=====================|=====+
- | | / | \ | |
- +=====|=====================O=====================|=====+
- ^ | | ^
- | v v |
- R_Ay F_t F_r R_By
- Rotational Speed: ω (rpm)
- Bending Moment: M (reverses sign every 180° rotation -> completely reversed fatigue)
- Torque: T (steady transmission -> constant mean shear stress)
- Fully Reversed Bending Stress
When a shaft rotates at angular velocity ω \omega ω under a stationary transverse load (such as gear pitch-line forces or gravity), any material element located on the outer surface rotates from maximum tension at the bottom outer fiber to maximum compression at the top outer fiber. Thus, steady external transverse forces produce completely reversed cyclic bending stresses : M a = M x 2 + M y 2 , M m = 0 M_a = \sqrt{M_x^2 + M_y^2}, \quad M_m = 0 M a = M x 2 + M y 2 , M m = 0 σ a = K f 32 M a π d 3 , σ m = K f 32 M m π d 3 = 0 \sigma_a = K_f \frac{32 M_a}{\pi d^3}, \quad \sigma_m = K_f \frac{32 M_m}{\pi d^3} = 0 σ a = K f π d 3 32 M a , σ m = K f π d 3 32 M m = 0
Where K f K_f K f is the fatigue stress concentration factor for bending at geometric transitions (shoulders, keyways, retaining ring grooves).
Torsional Shear Stress
In steady-state power transmission, the delivered motor torque is predominantly constant: T m = T = P ω = 63025 H n , T a ≈ 0 T_m = T = \frac{P}{\omega} = \frac{63025 H}{n}, \quad T_a \approx 0 T m = T = ω P = n 63025 H , T a ≈ 0 τ m = K f s 16 T m π d 3 , τ a = K f s 16 T a π d 3 ≈ 0 \tau_m = K_{fs} \frac{16 T_m}{\pi d^3}, \quad \tau_a = K_{fs} \frac{16 T_a}{\pi d^3} \approx 0 τ m = K f s π d 3 16 T m , τ a = K f s π d 3 16 T a ≈ 0
Where K f s K_{fs} K f s is the torsional fatigue stress concentration factor. For reciprocating machinery (internal combustion engines, piston compressors), an alternating torque component T a T_a T a exists and must be evaluated alongside T m T_m T m .
2. Multiaxial Fatigue Failure Criteria: The ASME Shaft Equation
Because the bending normal stress σ \sigma σ and torsional shear stress τ \tau τ act simultaneously on the shaft surface, they produce a biaxial plane stress state. Applying the Distortion Energy (DE / von Mises) theory separates the stress state into equivalent alternating and mean von Mises stresses: σ a ′ = σ a 2 + 3 τ a 2 = 16 π d 3 4 ( K f M a ) 2 + 3 ( K f s T a ) 2 \sigma_a' = \sqrt{\sigma_a^2 + 3 \tau_a^2} = \frac{16}{\pi d^3} \sqrt{4 (K_f M_a)^2 + 3 (K_{fs} T_a)^2} σ a ′ = σ a 2 + 3 τ a 2 = π d 3 16 4 ( K f M a ) 2 + 3 ( K f s T a ) 2 σ m ′ = σ m 2 + 3 τ m 2 = 16 π d 3 4 ( K f M m ) 2 + 3 ( K f s T m ) 2 \sigma_m' = \sqrt{\sigma_m^2 + 3 \tau_m^2} = \frac{16}{\pi d^3} \sqrt{4 (K_f M_m)^2 + 3 (K_{fs} T_m)^2} σ m ′ = σ m 2 + 3 τ m 2 = π d 3 16 4 ( K f M m ) 2 + 3 ( K f s T m ) 2
DE-Goodman Criterion
Coupling the equivalent stresses with the Modified Goodman fatigue failure line yields: σ a ′ S e + σ m ′ S u t = 1 n \frac{\sigma_a'}{S_e} + \frac{\sigma_m'}{S_{ut}} = \frac{1}{n} S e σ a ′ + S u t σ m ′ = n 1
Substituting the expressions for σ a ′ \sigma_a' σ a ′ and σ m ′ \sigma_m' σ m ′ and solving explicitly for the shaft diameter d d d gives the DE-Goodman shaft equation (the form used in Shigley; the withdrawn ANSI/ASME B106.1M shaft standard used the elliptic criterion instead): d = [ 16 n π { 1 S e ( 4 ( K f M a ) 2 + 3 ( K f s T a ) 2 ) 1 / 2 + 1 S u t ( 4 ( K f M m ) 2 + 3 ( K f s T m ) 2 ) 1 / 2 } ] 1 / 3 d = \left[ \frac{16 n}{\pi} \left\{ \frac{1}{S_e}\left(4(K_f M_a)^2 + 3(K_{fs} T_a)^2\right)^{1/2} + \frac{1}{S_{ut}}\left(4(K_f M_m)^2 + 3(K_{fs} T_m)^2\right)^{1/2} \right\} \right]^{1/3} d = [ π 16 n { S e 1 ( 4 ( K f M a ) 2 + 3 ( K f s T a ) 2 ) 1/2 + S u t 1 ( 4 ( K f M m ) 2 + 3 ( K f s T m ) 2 ) 1/2 } ] 1/3
For the common industrial case of purely reversed bending ( M m = 0 M_m = 0 M m = 0 ) and purely steady torque ( T a = 0 T_a = 0 T a = 0 ), this simplifies to: d = [ 16 n π ( 2 K f M a S e + 3 K f s T m S u t ) ] 1 / 3 d = \left[ \frac{16 n}{\pi} \left( \frac{2 K_f M_a}{S_e} + \frac{\sqrt{3} K_{fs} T_m}{S_{ut}} \right) \right]^{1/3} d = [ π 16 n ( S e 2 K f M a + S u t 3 K f s T m ) ] 1/3
DE-Gerber and Static Yield Check
The DE-Gerber criterion replaces the linear Goodman boundary with a parabolic relation: n σ a ′ S e + ( n σ m ′ S u t ) 2 = 1 \frac{n \sigma_a'}{S_e} + \left( \frac{n \sigma_m'}{S_{ut}} \right)^2 = 1 S e n σ a ′ + ( S u t n σ m ′ ) 2 = 1
Gerber models the mean of experimental failure data for ductile steels more closely, whereas Goodman is a conservative lower envelope that is widely used for design. In all designs, a first-cycle yield check (Langer / von Mises static line) must confirm that transient startup torques do not cause localized plastic deformation: σ max ′ = ( σ a + σ m ) 2 + 3 ( τ a + τ m ) 2 ≤ S y n y \sigma_{\max}' = \sqrt{(\sigma_a + \sigma_m)^2 + 3(\tau_a + \tau_m)^2} \le \frac{S_y}{n_y} σ m a x ′ = ( σ a + σ m ) 2 + 3 ( τ a + τ m ) 2 ≤ n y S y
3. Shaft Deflection & Angular Slope Limits
High-strength alloy steels increase fatigue allowable stresses ( S e , S u t S_e, S_{ut} S e , S u t ) without altering Young's modulus ( E ≈ 207 GPa E \approx 207\text{ GPa} E ≈ 207 GPa for all carbon and low-alloy steels). Consequently, shafts designed purely for fatigue strength often exhibit excessive elastic deflections that degrade gear mesh kinematics and destroy bearings.
Location / Machine Element Typical Maximum Slope Typical Maximum Transverse Deflection Failure Mechanism if Exceeded
Uncrowned Spur Gear Mesh θ < 0.0005 rad \theta < 0.0005\text{ rad} θ < 0.0005 rad ( 0.029 ∘ 0.029^\circ 0.02 9 ∘ ) 0.010 in 0.010\text{ in} 0.010 in ( P d < 10 P_d < 10 P d < 10 ); 0.005 in 0.005\text{ in} 0.005 in ( 11 ≤ P d ≤ 19 11 \le P_d \le 19 11 ≤ P d ≤ 19 ); 0.003 in 0.003\text{ in} 0.003 in ( 20 ≤ P d ≤ 50 20 \le P_d \le 50 20 ≤ P d ≤ 50 ) Tooth edge-loading, loss of line contact, rapid pitting
Tapered Roller Bearings 0.0005 to 0.0012 rad 0.0005\text{ to }0.0012\text{ rad} 0.0005 to 0.0012 rad N/A Edge loading of rollers and cups
Cylindrical Roller Bearings 0.0008 to 0.0012 rad 0.0008\text{ to }0.0012\text{ rad} 0.0008 to 0.0012 rad N/A Roller skewing, edge stress concentrations
Deep-Groove Ball Bearings 0.001 to 0.003 rad 0.001\text{ to }0.003\text{ rad} 0.001 to 0.003 rad N/A Raceway edge loading, early fatigue spalling
Spherical or Self-Aligning Ball Bearings 0.026 to 0.052 rad 0.026\text{ to }0.052\text{ rad} 0.026 to 0.052 rad ( 1.5 ∘ – 3 ∘ 1.5^\circ\text{--}3^\circ 1. 5 ∘ – 3 ∘ ) N/A Self-aligning designs tolerate substantial shaft slope
(Typical ranges from Shigley Table 7-2; bearing catalogs give the exact misalignment limits for each bearing series. Helical, bevel and crowned gears have their own manufacturer limits.)
Important
If a shaft satisfies fatigue stress limits but exceeds slope limits at a gear mesh, increasing the material strength will not fix the issue. The designer must increase the shaft diameter ( I ∝ d 4 I \propto d^4 I ∝ d 4 ) or shorten the bearing span L L L .
4. Shaft Whirling & Critical Speeds
Dynamic unbalance occurs because the mass center of any real rotor is displaced from its geometric axis of rotation by a small radial eccentricity e e e . As the shaft rotates at angular velocity ω \omega ω , centrifugal forces bow the shaft outward against its elastic flexural stiffness k k k : Elastic Centerline (Restoring Force: k*r)
- |
- v
- [ Bearing ] o---------*---------*---------o [ Bearing ]
- | |
- Geometric Center
- Center of Mass
- (r) (r + e)
- Centrifugal Force: F_c = m * ω^2 * (r + e)
- Equating F_c = k * r yields whirl amplitude: r = e * (ω / ω_n)^2 / [1 - (ω / ω_n)^2]
When operating speed ω \omega ω matches the lateral natural frequency ω n = k / m \omega_n = \sqrt{k/m} ω n = k / m , resonance occurs and the theoretical whirl amplitude approaches infinity. This natural frequency is the critical whirling speed ω c r \omega_{cr} ω cr .
Rayleigh-Ritz Method for Lumped Masses
For a shaft supporting multiple lumped masses w i = m i g w_i = m_i g w i = m i g with static deflections y i y_i y i caused by self-weight acting in the direction of vibration: ω c r = g ∑ i = 1 n w i y i ∑ i = 1 n w i y i 2 \omega_{cr} = \sqrt{\frac{g \sum_{i=1}^n w_i y_i}{\sum_{i=1}^n w_i y_i^2}} ω cr = ∑ i = 1 n w i y i 2 g ∑ i = 1 n w i y i
For a single concentrated center load on a simple span, this reduces to ω c r = g / y static \omega_{cr} = \sqrt{g / y_{\text{static}}} ω cr = g / y static .
Dunkerley's Equation
Dunkerley's method provides a lower-bound (conservative) estimate of the fundamental critical speed by combining the bare shaft natural frequency ω s \omega_s ω s with the critical speeds associated with each individual rotor mass ω i \omega_i ω i acting alone on a massless shaft: 1 ω c r 2 = 1 ω s 2 + 1 ω 1 2 + 1 ω 2 2 + ⋯ + 1 ω n 2 \frac{1}{\omega_{cr}^2} = \frac{1}{\omega_s^2} + \frac{1}{\omega_1^2} + \frac{1}{\omega_2^2} + \dots + \frac{1}{\omega_n^2} ω cr 2 1 = ω s 2 1 + ω 1 2 1 + ω 2 2 1 + ⋯ + ω n 2 1
Sub-Critical vs. Super-Critical Operation
Sub-Critical Operation ( ω < 0.75 ω c r \omega < 0.75\omega_{cr} ω < 0.75 ω cr ) : Standard for machine tool spindles, gearboxes, and industrial drives. The shaft remains rigid, with whirl amplitude remaining below eccentricity e e e .
Super-Critical Operation ( ω > 1.25 ω c r \omega > 1.25\omega_{cr} ω > 1.25 ω cr to 1.4 ω c r 1.4\omega_{cr} 1.4 ω cr ) : Common in high-speed turbomachinery (steam turbines, centrifuges). Above critical resonance, a 180 ∘ 180^\circ 18 0 ∘ phase lag occurs between unbalance and deflection; the rotor self-centers about its center of mass ( r → − e r \to -e r → − e ). Startup systems must accelerate rapidly through the critical speed with adequate external damping to prevent catastrophic deflection accumulation.
- 5. Complete Worked Shaft Design & Critical Speed Analysis
- Problem Statement
A solid drive shaft fabricated from AISI 1045 cold-drawn steel ( S u t = 630 MPa S_{ut} = 630\text{ MPa} S u t = 630 MPa , S y = 530 MPa S_y = 530\text{ MPa} S y = 530 MPa , E = 207 GPa E = 207\text{ GPa} E = 207 GPa ) is supported by deep-groove ball bearings across a simple span of L = 600 mm L = 600\text{ mm} L = 600 mm . The shaft transmits P = 30 kW P = 30\text{ kW} P = 30 kW at n = 1200 rpm n = 1200\text{ rpm} n = 1200 rpm under uniform, non-pulsating torque ( T a = 0 T_a = 0 T a = 0 ).
A spur gear mounted at mid-span ( x = 300 mm x = 300\text{ mm} x = 300 mm ) introduces a steady torque and a completely reversed bending moment of M a = 420 N ⋅ m M_a = 420\text{ N}\cdot\text{m} M a = 420 N ⋅ m ( M m = 0 M_m = 0 M m = 0 ). The total lumped rotor mass at mid-span is m = 32 kg m = 32\text{ kg} m = 32 kg .
At the gear mounting profile keyway, fatigue stress concentration factors are K f = 2.0 K_f = 2.0 K f = 2.0 (bending) and K f s = 1.6 K_{fs} = 1.6 K f s = 1.6 (torsion). The endurance limit corrected for size, surface finish, and reliability ( 99 % 99\% 99% ) is S e = 210 MPa S_e = 210\text{ MPa} S e = 210 MPa . The target design safety factor is n = 2.0 n = 2.0 n = 2.0 .
Step 1: Calculate Transmitted Torque ω = 1200 × 2 π 60 = 125.66 rad/s \omega = \frac{1200 \times 2\pi}{60} = 125.66\text{ rad/s} ω = 60 1200 × 2 π = 125.66 rad/s T m = P ω = 30000 W 125.66 rad/s = 238.73 N ⋅ m T_m = \frac{P}{\omega} = \frac{30000\text{ W}}{125.66\text{ rad/s}} = 238.73\text{ N}\cdot\text{m} T m = ω P = 125.66 rad/s 30000 W = 238.73 N ⋅ m
Step 2: Determine Minimum Diameter via the DE-Goodman Equation
Applying the simplified DE-Goodman shaft equation for M m = 0 M_m = 0 M m = 0 and T a = 0 T_a = 0 T a = 0 : d = [ 16 n π ( 2 K f M a S e + 3 K f s T m S u t ) ] 1 / 3 d = \left[ \frac{16 n}{\pi} \left( \frac{2 K_f M_a}{S_e} + \frac{\sqrt{3} K_{fs} T_m}{S_{ut}} \right) \right]^{1/3} d = [ π 16 n ( S e 2 K f M a + S u t 3 K f s T m ) ] 1/3
Evaluate the individual terms: 2 K f M a S e = 2 × 2.0 × 420 N ⋅ m 210 × 10 6 Pa = 1680 210 × 10 6 = 8.00 × 10 − 6 m 3 \frac{2 K_f M_a}{S_e} = \frac{2 \times 2.0 \times 420\text{ N}\cdot\text{m}}{210 \times 10^6\text{ Pa}} = \frac{1680}{210 \times 10^6} = 8.00 \times 10^{-6}\text{ m}^3 S e 2 K f M a = 210 × 1 0 6 Pa 2 × 2.0 × 420 N ⋅ m = 210 × 1 0 6 1680 = 8.00 × 1 0 − 6 m 3 3 K f s T m S u t = 1.732 × 1.6 × 238.73 N ⋅ m 630 × 10 6 Pa = 661.60 630 × 10 6 = 1.050 × 10 − 6 m 3 \frac{\sqrt{3} K_{fs} T_m}{S_{ut}} = \frac{1.732 \times 1.6 \times 238.73\text{ N}\cdot\text{m}}{630 \times 10^6\text{ Pa}} = \frac{661.60}{630 \times 10^6} = 1.050 \times 10^{-6}\text{ m}^3 S u t 3 K f s T m = 630 × 1 0 6 Pa 1.732 × 1.6 × 238.73 N ⋅ m = 630 × 1 0 6 661.60 = 1.050 × 1 0 − 6 m 3 Sum = ( 8.00 + 1.050 ) × 10 − 6 = 9.050 × 10 − 6 m 3 \text{Sum} = (8.00 + 1.050) \times 10^{-6} = 9.050 \times 10^{-6}\text{ m}^3 Sum = ( 8.00 + 1.050 ) × 1 0 − 6 = 9.050 × 1 0 − 6 m 3 16 n π = 16 × 2.0 π = 10.186 \frac{16 n}{\pi} = \frac{16 \times 2.0}{\pi} = 10.186 π 16 n = π 16 × 2.0 = 10.186 d 3 = 10.186 × 9.050 × 10 − 6 = 9.218 × 10 − 5 m 3 d^3 = 10.186 \times 9.050 \times 10^{-6} = 9.218 \times 10^{-5}\text{ m}^3 d 3 = 10.186 × 9.050 × 1 0 − 6 = 9.218 × 1 0 − 5 m 3 d = ( 9.218 × 10 − 5 ) 1 / 3 = 0.04517 m = 45.2 mm d = (9.218 \times 10^{-5})^{1/3} = 0.04517\text{ m} = 45.2\text{ mm} d = ( 9.218 × 1 0 − 5 ) 1/3 = 0.04517 m = 45.2 mm
Select standard metric shaft diameter: d = 50 mm = 0.050 m d = 50\text{ mm} = 0.050\text{ m} d = 50 mm = 0.050 m .
Step 3: First-Cycle Static Yield Verification at d = 50 mm d = 50\text{ mm} d = 50 mm σ a = 32 K f M a π d 3 = 32 × 2.0 × 420 π ( 0.050 ) 3 = 68.45 MPa \sigma_a = \frac{32 K_f M_a}{\pi d^3} = \frac{32 \times 2.0 \times 420}{\pi (0.050)^3} = 68.45\text{ MPa} σ a = π d 3 32 K f M a = π ( 0.050 ) 3 32 × 2.0 × 420 = 68.45 MPa τ m = 16 K f s T m π d 3 = 16 × 1.6 × 238.73 π ( 0.050 ) 3 = 15.56 MPa \tau_m = \frac{16 K_{fs} T_m}{\pi d^3} = \frac{16 \times 1.6 \times 238.73}{\pi (0.050)^3} = 15.56\text{ MPa} τ m = π d 3 16 K f s T m = π ( 0.050 ) 3 16 × 1.6 × 238.73 = 15.56 MPa σ max ′ = σ a 2 + 3 τ m 2 = ( 68.45 ) 2 + 3 ( 15.56 ) 2 = 4685.4 + 726.3 = 73.56 MPa \sigma_{\max}' = \sqrt{\sigma_a^2 + 3 \tau_m^2} = \sqrt{(68.45)^2 + 3(15.56)^2} = \sqrt{4685.4 + 726.3} = 73.56\text{ MPa} σ m a x ′ = σ a 2 + 3 τ m 2 = ( 68.45 ) 2 + 3 ( 15.56 ) 2 = 4685.4 + 726.3 = 73.56 MPa n y = S y σ max ′ = 530 MPa 73.56 MPa = 7.21 ≫ 1.0 (Safe against static yielding) n_y = \frac{S_y}{\sigma_{\max}'} = \frac{530\text{ MPa}}{73.56\text{ MPa}} = 7.21 \gg 1.0 \quad \text{(Safe against static yielding)} n y = σ m a x ′ S y = 73.56 MPa 530 MPa = 7.21 ≫ 1.0 (Safe against static yielding)
Step 4: Critical Whirling Speed & Bearing Slope Verification
Calculate shaft cross-sectional area moment of inertia: I = π d 4 64 = π ( 0.050 ) 4 64 = 3.068 × 10 − 7 m 4 I = \frac{\pi d^4}{64} = \frac{\pi (0.050)^4}{64} = 3.068 \times 10^{-7}\text{ m}^4 I = 64 π d 4 = 64 π ( 0.050 ) 4 = 3.068 × 1 0 − 7 m 4 E I = ( 207 × 10 9 Pa ) × ( 3.068 × 10 − 7 m 4 ) = 63507 N ⋅ m 2 E I = (207 \times 10^9\text{ Pa}) \times (3.068 \times 10^{-7}\text{ m}^4) = 63507\text{ N}\cdot\text{m}^2 E I = ( 207 × 1 0 9 Pa ) × ( 3.068 × 1 0 − 7 m 4 ) = 63507 N ⋅ m 2
Rotor weight acting at mid-span: W = m g = 32 kg × 9.81 m/s 2 = 313.92 N W = m g = 32\text{ kg} \times 9.81\text{ m/s}^2 = 313.92\text{ N} W = m g = 32 kg × 9.81 m/s 2 = 313.92 N
Mid-span static deflection under rotor weight: y static = W L 3 48 E I = 313.92 × ( 0.600 ) 3 48 × 63507 = 67.807 3048336 = 2.224 × 10 − 5 m = 0.02224 mm y_{\text{static}} = \frac{W L^3}{48 E I} = \frac{313.92 \times (0.600)^3}{48 \times 63507} = \frac{67.807}{3048336} = 2.224 \times 10^{-5}\text{ m} = 0.02224\text{ mm} y static = 48 E I W L 3 = 48 × 63507 313.92 × ( 0.600 ) 3 = 3048336 67.807 = 2.224 × 1 0 − 5 m = 0.02224 mm
Fundamental critical whirling speed: ω c r = g y static = 9.81 m/s 2 2.224 × 10 − 5 m = 441097 = 664.15 rad/s \omega_{cr} = \sqrt{\frac{g}{y_{\text{static}}}} = \sqrt{\frac{9.81\text{ m/s}^2}{2.224 \times 10^{-5}\text{ m}}} = \sqrt{441097} = 664.15\text{ rad/s} ω cr = y static g = 2.224 × 1 0 − 5 m 9.81 m/s 2 = 441097 = 664.15 rad/s N c r = 664.15 × 60 2 π = 6342 rpm N_{cr} = \frac{664.15 \times 60}{2\pi} = 6342\text{ rpm} N cr = 2 π 664.15 × 60 = 6342 rpm N op N c r = 1200 rpm 6342 rpm = 0.189 ( 18.9 % of critical speed ) \frac{N_{\text{op}}}{N_{cr}} = \frac{1200\text{ rpm}}{6342\text{ rpm}} = 0.189 \quad (18.9\% \text{ of critical speed}) N cr N op = 6342 rpm 1200 rpm = 0.189 ( 18.9% of critical speed )
The operating speed is far below the 75 % 75\% 75% threshold, confirming rigid sub-critical operation free of whirling resonance.
Check bearing seat slope θ \theta θ at the supports: θ bearing = W L 2 16 E I = 313.92 × ( 0.600 ) 2 16 × 63507 = 113.01 1016112 = 1.112 × 10 − 4 rad = 0.000111 rad \theta_{\text{bearing}} = \frac{W L^2}{16 E I} = \frac{313.92 \times (0.600)^2}{16 \times 63507} = \frac{113.01}{1016112} = 1.112 \times 10^{-4}\text{ rad} = 0.000111\text{ rad} θ bearing = 16 E I W L 2 = 16 × 63507 313.92 × ( 0.600 ) 2 = 1016112 113.01 = 1.112 × 1 0 − 4 rad = 0.000111 rad
Because 0.000111 rad ≪ 0.001 rad 0.000111\text{ rad} \ll 0.001\text{ rad} 0.000111 rad ≪ 0.001 rad (the allowable alignment limit for deep-groove ball bearings), the shaft satisfies all stiffness and operational criteria.