Study guide
9.2 Spur Gears: Geometry, Kinematics & AGMA Stress Equations
PE Mechanical: Machine Design and Materials Exam
Track your progress as you read
Finished sections get a check mark.
1 Chapter 1: Basic Engineering Practice: Drawings, Economics & Design Methodology
1.1 Engineering Terms, Symbols, Drawing Interpretation & Conventions 1.2 Project Management & Engineering Economics 1.3 Design Methodology, Risk Assessment & Safety
2 Chapter 2: Physical & Mechanical Properties of Engineering Materials
2.1 Stress-Strain Relationships & Fundamental Mechanical Properties 2.2 Physical Properties, Temperature Effects, Hardness, Impact Toughness & Creep
3 Chapter 3: Mechanics of Materials: Fundamental Loadings & Deflections
3.1 Axial Loading, Normal Stress & Statically Indeterminate Members 3.2 Direct Shear, Bearing & Transverse Shear in Beams 3.3 Torsion of Shafts, Power Transmission & Thin-Walled Tubes 3.4 Beam Bending Stresses & Deflection Analysis
4 Chapter 4: Mechanics of Materials: Stability, Multiaxial Stress & Thermal Effects
4.1 Column Buckling & Elastic/Inelastic Instability 4.2 Combined Loading, Principal Stresses & Mohr's Circle 4.3 Thermal Stresses & Interference Stresses
5 Chapter 5: Failure Theories: Static Yielding & Fracture Mechanics
5.1 Static Failure Theories for Ductile Materials: von Mises & Tresca 5.2 Static Failure Theories for Brittle Materials & Fracture Mechanics
6 Chapter 6: Fatigue Analysis & Dynamic Failure
6.1 High-Cycle Fatigue, S-N Curves & Marin Modifying Factors 6.2 Fluctuating Stresses, Failure Criteria & Cumulative Damage
7 Chapter 7: Mechanical Attachments: Fasteners & Bolted Joints
7.1 Threaded Fasteners, Proof Strength & Preload Mechanics 7.2 Bolted Joint Stiffness, External Loading & Separation 7.3 Non-Threaded Fasteners: Keys, Pins, Clevises, Retaining Rings, Rivets, Lugs & Anchors
8 Chapter 8: Mechanical Attachments: Permanent Joints & Bonding
8.1 Welded Joints & Weld Group Stress Analysis 8.2 Brazing, Soldering & Structural Adhesive Bonding
9 Chapter 9: Power Transmission: Shafts & Gearing
9.1 Transmission Shaft Design, Critical Speeds & Deflection 9.2 Spur Gears: Geometry, Kinematics & AGMA Stress Equations 9.3 Helical, Bevel & Worm Gearing
10 Chapter 10: Power Transmission: Bearings, Flexible Drives, Friction Devices & Prime Movers
10.1 Rolling-Element Bearings & L10 Life Calculations 10.2 Hydrodynamic Journal Bearings & Lubrication Regimes 10.3 Belts, Roller Chains & Flexible Drives 10.4 Clutches, Brakes & Power Screws 10.5 Electric Motors, Engines & Flywheels
11 Chapter 11: Mechanical Components: Pressure Vessels & Structural Systems
11.1 Pressure Vessels & Piping: Thin and Thick Walls, ASME VIII and B31 11.2 Mechanical Springs: Helical, Belleville & Leaf Springs 11.3 Structural Trusses, Rigid Frames & Energy Methods
12 Chapter 12: Mechanical Dynamics, Vibrations & Fluid Power
12.1 Single-Degree-of-Freedom Vibrations & Resonance 12.2 Vibration Isolation, Multi-DOF Systems & Transmissibility 12.3 Fluid Power Systems: Hydraulics & Pneumatics
13 Chapter 13: Kinematics, Mechatronics & Control Systems
13.1 Mechanism Kinematics, Linkages, Cams & Simple Machines 13.2 Basic Mechatronics, Sensors & Closed-Loop Controls
14 Chapter 14: Supportive Knowledge: Fits, Tolerances & Manufacturing Methods
14.1 Limits, Fits & Geometric Dimensioning & Tolerancing (GD&T) 14.2 Manufacturing Methods, Machinability, Heat Treatment & Assembly
15 Chapter 15: Supportive Knowledge: Codes, Computation, Testing & Corrosion
15.1 Engineering Codes & Standards 15.2 Computational Methods: FEA & Numerical Analysis 15.3 Instrumentation, Testing, Inspection & Quality 15.4 Chemical Processes: Corrosion, Oxidation & Embrittlement
9.2 Spur Gears: Geometry, Kinematics & AGMA Stress Equations
Key Takeaways Explain This Topic AI
Involute spur gear profiles enforce conjugate action, guaranteeing a strictly constant velocity ratio m v = N G / N P = ω P / ω G m_v = N_G / N_P = \omega_P / \omega_G m v = N G / N P = ω P / ω G regardless of minor operating center distance variations.
Undercutting occurs during rack generation when the tip of the cutting rack extends inside the base circle tangent; for standard full-depth 20 ∘ 20^\circ 2 0 ∘ teeth, the minimum tooth count to avoid undercutting is N min = 18 N_{\min} = 18 N m i n = 18 teeth.
Epicyclic (planetary) gear train velocity analysis is governed by the relative kinematic formula ( ω L − ω arm ) / ( ω F − ω arm ) = e (\omega_L - \omega_{\text{arm}}) / (\omega_F - \omega_{\text{arm}}) = e ( ω L − ω arm ) / ( ω F − ω arm ) = e , coupled with the geometric pitch diameter constraint N R = N S + 2 N P N_R = N_S + 2 N_P N R = N S + 2 N P .
AGMA tooth bending stress incorporates dynamic velocity effects ( K v K_v K v ), load distribution ( K m K_m K m ), and root fillet stress concentration via the geometry factor J J J , scaling linearly with transmitted tangential load W t W_t W t .
AGMA pitting resistance (Hertzian contact stress σ c \sigma_c σ c ) scales with W t \sqrt{W_t} W t and typically governs gear pair sizing over bending fatigue, as cyclic surface shear initiates subsurface microcracks leading to progressive pitting.
Last updated: October 2026
9.2 Spur Gears: Geometry, Kinematics & AGMA Stress Equations
Spur gears are the simplest and most widely used power transmission elements for parallel rotating shafts. Precise gear design requires balancing geometric kinematic requirements (conjugate action, contact ratio, and non-undercutting geometry) against structural failure modes governed by the American Gear Manufacturers Association (AGMA) standards: tooth root bending fatigue and surface contact pitting.
1. Spur Gear Tooth Geometry & Involute Proportions
The fundamental law of gearing dictates that for a constant angular velocity ratio between two meshing gears, the common normal to the tooth profiles at their contact point must pass through a fixed point on the line of centers known as the pitch point P P P . The involute curve satisfies this condition and provides conjugate action even when shaft center distance deviates slightly from nominal. [Base Circle]
- / \
- [Pitch Circle] / \
- / \ / \
- / Pitch \ / \
- | Point | | Involute |
- | P |-----| Tooth Profile |
- \ / \ /
- \ / \ /
- \ / \ /
- \ /
- [Base Circle d_b = d * cos(φ)]
Pressure Angle (φ): Angle between Line of Action and common tangent to pitch circles.
Standard: φ = 20° (historic: 14.5°, heavy-duty: 25°).
Fundamental Geometric Definitions
Pitch Diameter ( d d d ) : The theoretical diameter of the pitch cylinder rolling without slip: d = N / P d = m N d = N / P_d = m N d = N / P d = m N .
Diametral Pitch ( P d P_d P d ) : Teeth per unit pitch diameter (in US Customary units, in − 1 \text{in}^{-1} in − 1 ): P d = N / d P_d = N / d P d = N / d .
Module ( m m m ) : Pitch diameter in millimeters per tooth (in metric units, mm): m = d / N = 25.4 / P d m = d / N = 25.4 / P_d m = d / N = 25.4/ P d .
Circular Pitch ( p p p ) : Distance along the pitch circle from a point on one tooth to the corresponding point on the next: p = π d / N = π / P d = π m p = \pi d / N = \pi / P_d = \pi m p = π d / N = π / P d = πm .
Base Circle Diameter ( d b d_b d b ) : The fundamental generating cylinder from which the involute profile originates: d b = d cos ϕ d_b = d \cos \phi d b = d cos ϕ .
Base Pitch ( p b p_b p b ) : Distance along the base circle: p b = p cos ϕ = π d b / N p_b = p \cos \phi = \pi d_b / N p b = p cos ϕ = π d b / N .
Standard Tooth Proportions (Full-Depth Involute) :
- Addendum: a = 1.0 / P d = 1.0 m a = 1.0 / P_d = 1.0 m a = 1.0/ P d = 1.0 m
- Dedendum: b = 1.25 / P d = 1.25 m b = 1.25 / P_d = 1.25 m b = 1.25/ P d = 1.25 m
- Clearance: c = b − a = 0.25 / P d = 0.25 m c = b - a = 0.25 / P_d = 0.25 m c = b − a = 0.25/ P d = 0.25 m
Whole Depth: h t = a + b = 2.25 / P d = 2.25 m h_t = a + b = 2.25 / P_d = 2.25 m h t = a + b = 2.25/ P d = 2.25 m
Working Depth: h k = 2 a = 2.0 / P d = 2.0 m h_k = 2 a = 2.0 / P_d = 2.0 m h k = 2 a = 2.0/ P d = 2.0 m
Tooth Thickness on Pitch Circle: t = p / 2 = π / ( 2 P d ) t = p / 2 = \pi / (2 P_d) t = p /2 = π / ( 2 P d )
Contact Ratio ( m c m_c m c )
The contact ratio represents the average number of tooth pairs in contact simultaneously: m c = L a b p b = r a , P 2 − r b , P 2 + r a , G 2 − r b , G 2 − C sin ϕ p cos ϕ m_c = \frac{L_{ab}}{p_b} = \frac{\sqrt{r_{a,P}^2 - r_{b,P}^2} + \sqrt{r_{a,G}^2 - r_{b,G}^2} - C \sin \phi}{p \cos \phi} m c = p b L ab = p cos ϕ r a , P 2 − r b , P 2 + r a , G 2 − r b , G 2 − C sin ϕ
Where r a r_{a} r a is addendum radius ( d / 2 + a d/2 + a d /2 + a ), r b r_b r b is base radius ( d b / 2 d_b / 2 d b /2 ), and C C C is center distance ( ( d P + d G ) / 2 (d_P + d_G)/2 ( d P + d G ) /2 ). To ensure continuous, quiet power transfer without dynamic impact as teeth engage and disengage, designers keep the contact ratio at or above about 1.2: m c ≥ 1.2 (Recommended: 1.4 ≤ m c ≤ 1.8 ) m_c \ge 1.2 \quad \text{(Recommended: } 1.4 \le m_c \le 1.8\text{)} m c ≥ 1.2 (Recommended: 1.4 ≤ m c ≤ 1.8 )
Interference & Undercutting Thresholds
Interference occurs when contact takes place along the line of action outside the tangent points of the base circles, causing the hardened tip of one tooth to dig into the flank of its mating tooth. During gear manufacturing (e.g., hobbing with a rack cutter), interference causes the cutter to remove material from the dedendum root, weakening the tooth bending strength (undercutting).
For a pinion generated by a standard full-depth rack cutter ( k = 1.0 k = 1.0 k = 1.0 ), the minimum tooth count to prevent undercutting is: N min = 2 k sin 2 ϕ N_{\min} = \frac{2 k}{\sin^2 \phi} N m i n = sin 2 ϕ 2 k
Pressure Angle ( ϕ \phi ϕ ) Theoretical N min N_{\min} N m i n (Rack Cutter) Minimum Practical Teeth Without Undercutting
14.5 ∘ 14.5^\circ 14. 5 ∘ (Obsolete) N min = 2 / sin 2 ( 14.5 ∘ ) = 31.9 N_{\min} = 2 / \sin^2(14.5^\circ) = 31.9 N m i n = 2/ sin 2 ( 14. 5 ∘ ) = 31.9 32 teeth
20 ∘ 20^\circ 2 0 ∘ (Standard) N min = 2 / sin 2 ( 20 ∘ ) = 17.1 N_{\min} = 2 / \sin^2(20^\circ) = 17.1 N m i n = 2/ sin 2 ( 2 0 ∘ ) = 17.1 18 teeth
25 ∘ 25^\circ 2 5 ∘ (High Strength) N min = 2 / sin 2 ( 25 ∘ ) = 11.2 N_{\min} = 2 / \sin^2(25^\circ) = 11.2 N m i n = 2/ sin 2 ( 2 5 ∘ ) = 11.2 12 teeth
For two identical equal gears ( 1 : 1 1:1 1 : 1 ratio) meshing together, the threshold is lower: N min = 2 k 3 sin 2 ϕ ( 1 + 1 + 3 sin 2 ϕ ) → ϕ = 20 ∘ N min ≈ 12.3 ⟹ 13 teeth N_{\min} = \frac{2 k}{3 \sin^2 \phi}\left(1 + \sqrt{1 + 3\sin^2 \phi}\right) \xrightarrow{\phi = 20^\circ} N_{\min} \approx 12.3 \implies 13\text{ teeth} N m i n = 3 sin 2 ϕ 2 k ( 1 + 1 + 3 sin 2 ϕ ) ϕ = 2 0 ∘ N m i n ≈ 12.3 ⟹ 13 teeth
- 2. Gear Kinematics & Epicyclic (Planetary) Trains
- Pitch Line Velocity & Transmitted Tangential Force
For a pinion rotating at n P rpm n_P\text{ rpm} n P rpm transmitting power H (hp) H\text{ (hp)} H (hp) or P (kW) P\text{ (kW)} P (kW) : V = π d P n P 12 ft/min = π d P n P 60 m/s V = \frac{\pi d_P n_P}{12}\text{ ft/min} = \frac{\pi d_P n_P}{60}\text{ m/s} V = 12 π d P n P ft/min = 60 π d P n P m/s W t = 33000 H V lbf = 1000 P V N = 2 T P d P W_t = \frac{33000 H}{V}\text{ lbf} = \frac{1000 P}{V}\text{ N} = \frac{2 T_P}{d_P} W t = V 33000 H lbf = V 1000 P N = d P 2 T P
Separating radial force: W r = W t tan ϕ W_r = W_t \tan \phi W r = W t tan ϕ . Total normal force: W = W t / cos ϕ W = W_t / \cos \phi W = W t / cos ϕ .
Simple and Compound Gear Trains
For a train of external spur gears, the train value (output speed divided by input speed) is e = n L n F = ± product of driving-gear tooth numbers product of driven-gear tooth numbers e = \frac{n_L}{n_F} = \pm \frac{\text{product of driving-gear tooth numbers}}{\text{product of driven-gear tooth numbers}} e = n F n L = ± product of driven-gear tooth numbers product of driving-gear tooth numbers
Each external mesh reverses the direction of rotation, so the sign is positive for an even number of external meshes and negative for an odd number; an internal (ring) mesh does not reverse direction.
Simple train : one gear per shaft. Intermediate idler gears cancel out of the tooth ratio ( e = − N 1 / N 3 e = -N_1/N_3 e = − N 1 / N 3 for gear 1 driving gear 3 through idler 2) but change the direction of rotation and the center distance.
Compound train : two gears fixed to an intermediate shaft, so the stage ratios multiply. A single spur stage is usually kept below about 10:1; larger reductions use two or more stages.
Reverted compound train : the output shaft is coaxial with the input shaft, which requires equal center distances in both stages, r 2 + r 3 = r 4 + r 5 r_2 + r_3 = r_4 + r_5 r 2 + r 3 = r 4 + r 5 (for equal pitch, N 2 + N 3 = N 4 + N 5 N_2 + N_3 = N_4 + N_5 N 2 + N 3 = N 4 + N 5 ).
Example: a 20-tooth pinion drives a 60-tooth gear; a 15-tooth pinion on the same shaft drives a 45-tooth output gear. Then e = ( 20 × 15 ) / ( 60 × 45 ) = 1 / 9 e = (20 \times 15)/(60 \times 45) = 1/9 e = ( 20 × 15 ) / ( 60 × 45 ) = 1/9 , two external meshes give the same rotation direction as the input, and a 1,800 rpm 1{,}800\,\text{rpm} 1 , 800 rpm input produces 200 rpm 200\,\text{rpm} 200 rpm at the output. Because 20 + 60 = 80 20 + 60 = 80 20 + 60 = 80 but 15 + 45 = 60 15 + 45 = 60 15 + 45 = 60 , this train cannot be reverted without changing the second-stage pitch.
Epicyclic (Planetary) Gear Trains
Epicyclic trains provide compact, coaxial, high-ratio speed reduction. The basic stage comprises a central Sun gear ( S S S ), several Planet gears ( P P P ) mounted on a rotating Carrier Arm ( A A A ), and an outer internal Ring/Annulus gear ( R R R ). +----------------------------+
- | Ring Gear (R) |
- | +----------------------+ |
- | | Planet (P) | |
- | | +----------+ | |
- | | | Sun (S) | | |
- | | | (O) | | |
- | | +----------+ | |
- | | [Carrier A] | |
- | +----------------------+ |
- +----------------------------+
Pitch Diameter Constraint: d_R = d_S + 2 * d_P ==> N_R = N_S + 2 * N_P
The fundamental kinematic equation relating the first gear ( F F F ), last gear ( L L L ), and carrier arm is: ω L − ω arm ω F − ω arm = e \frac{\omega_L - \omega_{\text{arm}}}{\omega_F - \omega_{\text{arm}}} = e ω F − ω arm ω L − ω arm = e
Where e e e is the train value with the carrier locked stationary ( e = ( − N S / N P ) × ( + N P / N R ) = − N S / N R e = (-N_S / N_P) \times (+N_P / N_R) = -N_S / N_R e = ( − N S / N P ) × ( + N P / N R ) = − N S / N R ).
3. AGMA Tooth Bending Stress (ANSI/AGMA 2001-D04)
Note
The equations in this section follow ANSI/AGMA 2001-D04 (inch units), the form taught in Shigley and most exam references. AGMA has since replaced it with the metric-only ANSI/AGMA 2101-E25, and the Q v Q_v Q v accuracy number comes from the older AGMA 2000/2015 system (now ANSI/AGMA ISO 1328-1). Use whatever factor charts and equations the problem or reference handbook supplies.
The historic Lewis equation modeled the tooth as a cantilever beam loaded at the tip: σ = W t P d / ( F Y ) \sigma = W_t P_d / (F Y) σ = W t P d / ( F Y ) . The modernized AGMA Bending Stress Equation refines this by incorporating dynamic velocity magnification, load distribution, and fillet stress concentration evaluated at the Highest Point of Single Tooth Contact (HPSTC): σ = W t K o K v K s P d F K m K B J [ SI: σ = W t F m K o K v K s K m K B J ] \sigma = W_t K_o K_v K_s \frac{P_d}{F} \frac{K_m K_B}{J} \quad \left[ \text{SI: } \sigma = \frac{W_t}{F m} K_o K_v K_s K_m \frac{K_B}{J} \right] σ = W t K o K v K s F P d J K m K B [ SI: σ = F m W t K o K v K s K m J K B ]
Where the governing parameters are defined as follows:
W t W_t W t : Transmitted tangential pitch-line load (lbf or N).
K o K_o K o : Overload factor ; accounts for roughness and shock from prime mover and driven load (uniform = 1.0 = 1.0 = 1.0 , light shock = 1.25 = 1.25 = 1.25 , heavy shock = 1.75 − 2.25 = 1.75 - 2.25 = 1.75 − 2.25 ).
K v K_v K v : Dynamic factor ; accounts for tooth spacing inaccuracies and pitch line velocity V V V via the AGMA Transmission Accuracy Number Q v Q_v Q v ( Q v = 5 − 11 Q_v = 5 - 11 Q v = 5 − 11 ): K v = ( A + V A ) B , B = 0.25 ( 12 − Q v ) 2 / 3 , A = 50 + 56 ( 1 − B ) K_v = \left( \frac{A + \sqrt{V}}{A} \right)^B, \quad B = 0.25(12 - Q_v)^{2/3}, \quad A = 50 + 56(1 - B) K v = ( A A + V ) B , B = 0.25 ( 12 − Q v ) 2/3 , A = 50 + 56 ( 1 − B )
K s K_s K s : Size factor ; accounts for non-uniform material properties across thick tooth modules ( K s = 1.0 K_s = 1.0 K s = 1.0 for P d ≥ 5 P_d \ge 5 P d ≥ 5 ).
F F F : Active face width of the gear tooth (in or mm). Recommended: 8 / P d ≤ F ≤ 16 / P d 8/P_d \le F \le 16/P_d 8/ P d ≤ F ≤ 16/ P d .
K m K_m K m : Load distribution factor ; accounts for shaft deflection, housing misalignment, and tooth crowning ( K m ≥ 1.0 K_m \ge 1.0 K m ≥ 1.0 ).
K B K_B K B : Rim thickness factor ; for solid gears K B = 1.0 K_B = 1.0 K B = 1.0 ; for thin-rimmed gears with backup ratio m B < 1.2 m_B < 1.2 m B < 1.2 , K B > 1.0 K_B > 1.0 K B > 1.0 .
J J J : AGMA bending geometry factor ; incorporates the Lewis form factor, tooth root fillet stress concentration factor, and load sharing at the HPSTC.
Allowable bending stress check: σ ≤ σ all = S t S F Y N K T K R \sigma \le \sigma_{\text{all}} = \frac{S_t}{S_F} \frac{Y_N}{K_T K_R} σ ≤ σ all = S F S t K T K R Y N , where S t S_t S t is bending fatigue strength, S F S_F S F is bending safety factor, and Y N Y_N Y N is stress cycle factor.
4. AGMA Pitting Resistance (Surface Contact Stress)
Gear surface failure (pitting) results from repeated cyclic contact stresses governed by Hertzian contact between two cylinders. The AGMA Contact Stress Equation is: σ c = Z E W t K o K v K s K m d P F C f I \sigma_c = Z_E \sqrt{W_t K_o K_v K_s \frac{K_m}{d_P F} \frac{C_f}{I}} σ c = Z E W t K o K v K s d P F K m I C f
Z E Z_E Z E : Elastic coefficient , derived from Poisson's ratio ν \nu ν and Young's modulus E E E of the pinion and gear: Z E = 1 π ( 1 − ν P 2 E P + 1 − ν G 2 E G ) Z_E = \sqrt{\frac{1}{\pi \left( \frac{1-\nu_P^2}{E_P} + \frac{1-\nu_G^2}{E_G} \right)}} Z E = π ( E P 1 − ν P 2 + E G 1 − ν G 2 ) 1
For steel mating with steel ( E = 30 × 10 6 psi , ν = 0.30 E = 30 \times 10^6\text{ psi}, \nu = 0.30 E = 30 × 1 0 6 psi , ν = 0.30 ), Z E ≈ 2300 psi Z_E \approx 2300\sqrt{\text{psi}} Z E ≈ 2300 psi ( 191 MPa 191\sqrt{\text{MPa}} 191 MPa ).
I I I : AGMA surface geometry factor , defined for external spur gears as: I = cos ϕ sin ϕ 2 m N ( m G m G + 1 ) I = \frac{\cos \phi \sin \phi}{2 m_N} \left( \frac{m_G}{m_G + 1} \right) I = 2 m N cos ϕ sin ϕ ( m G + 1 m G )
Where m N = 1.0 m_N = 1.0 m N = 1.0 for spur gears (load sharing ratio) and m G = N G / N P m_G = N_G / N_P m G = N G / N P .
C f C_f C f : Surface condition factor ( C f = 1.0 C_f = 1.0 C f = 1.0 for standard ground/shaved finishes).
Tip
Notice that σ c ∝ W t \sigma_c \propto \sqrt{W_t} σ c ∝ W t , whereas bending stress σ ∝ W t \sigma \propto W_t σ ∝ W t . Because allowable contact fatigue strengths are evaluated directly against σ c \sigma_c σ c , surface pitting often governs through-hardened steel gears. To compare the two modes fairly, compare the bending factor S F S_F S F with the square of the contact factor, S H 2 S_H^2 S H 2 .
- 5. Complete Worked Problem: AGMA Bending & Contact Stress Analysis
- Problem Statement
A commercial single-reduction spur gear drive transmits H = 25 hp H = 25\text{ hp} H = 25 hp from an electric motor running at n P = 1750 rpm n_P = 1750\text{ rpm} n P = 1750 rpm to an industrial blower. The drive specifications are:
- Diametral Pitch: P d = 5 in − 1 P_d = 5\text{ in}^{-1} P d = 5 in − 1
- Pressure Angle: ϕ = 20 ∘ \phi = 20^\circ ϕ = 2 0 ∘ (full-depth involute)
- Pinion teeth: N P = 20 N_P = 20 N P = 20 ; Gear teeth: N G = 60 N_G = 60 N G = 60
- Face width: F = 1.75 in F = 1.75\text{ in} F = 1.75 in
- AGMA Quality Number: Q v = 6 Q_v = 6 Q v = 6
- Application Overload Factor: K o = 1.25 K_o = 1.25 K o = 1.25 (light shock)
- Load Distribution Factor: K m = 1.22 K_m = 1.22 K m = 1.22
Size Factor: K s = 1.0 K_s = 1.0 K s = 1.0 ; Rim Factor: K B = 1.0 K_B = 1.0 K B = 1.0 ; Surface Factor: C f = 1.0 C_f = 1.0 C f = 1.0
AGMA Pinion Geometry Factors: Bending J = 0.35 J = 0.35 J = 0.35 ; Contact I = 0.1205 I = 0.1205 I = 0.1205
Material: Grade 1 through-hardened steel ( 250 HB 250\text{ HB} 250 HB , Z E = 2300 psi Z_E = 2300\sqrt{\text{psi}} Z E = 2300 psi , AGMA Grade 1 allowables from Shigley: bending S t = 77.3 HB + 12,800 = 32,125 psi ≈ 32.1 ksi S_t = 77.3\,\text{HB} + 12{,}800 = 32{,}125\text{ psi} \approx 32.1\text{ ksi} S t = 77.3 HB + 12 , 800 = 32 , 125 psi ≈ 32.1 ksi and contact S c = 322 HB + 29,100 = 109,600 psi ≈ 109.6 ksi S_c = 322\,\text{HB} + 29{,}100 = 109{,}600\text{ psi} \approx 109.6\text{ ksi} S c = 322 HB + 29 , 100 = 109 , 600 psi ≈ 109.6 ksi ; take Y N = Z N = K T = K R = 1 Y_N = Z_N = K_T = K_R = 1 Y N = Z N = K T = K R = 1 for 10 7 10^7 1 0 7 cycles at 99% reliability)
Step 1: Kinematics & Transmitted Tangential Load
Calculate pitch diameters and pitch line velocity: d P = N P P d = 20 5 = 4.00 in , d G = N G P d = 60 5 = 12.00 in d_P = \frac{N_P}{P_d} = \frac{20}{5} = 4.00\text{ in}, \quad d_G = \frac{N_G}{P_d} = \frac{60}{5} = 12.00\text{ in} d P = P d N P = 5 20 = 4.00 in , d G = P d N G = 5 60 = 12.00 in V = π d P n P 12 = π × 4.00 in × 1750 rpm 12 = 1832.6 ft/min V = \frac{\pi d_P n_P}{12} = \frac{\pi \times 4.00\text{ in} \times 1750\text{ rpm}}{12} = 1832.6\text{ ft/min} V = 12 π d P n P = 12 π × 4.00 in × 1750 rpm = 1832.6 ft/min
Calculate transmitted tangential load W t W_t W t : W t = 33000 H V = 33000 × 25 hp 1832.6 ft/min = 450.2 lbf W_t = \frac{33000 H}{V} = \frac{33000 \times 25\text{ hp}}{1832.6\text{ ft/min}} = 450.2\text{ lbf} W t = V 33000 H = 1832.6 ft/min 33000 × 25 hp = 450.2 lbf
Step 2: Dynamic Factor K v K_v K v
For Q v = 6 Q_v = 6 Q v = 6 : B = 0.25 ( 12 − Q v ) 2 / 3 = 0.25 ( 12 − 6 ) 2 / 3 = 0.25 × ( 6 ) 2 / 3 = 0.25 × 3.3019 = 0.8255 B = 0.25 (12 - Q_v)^{2/3} = 0.25 (12 - 6)^{2/3} = 0.25 \times (6)^{2/3} = 0.25 \times 3.3019 = 0.8255 B = 0.25 ( 12 − Q v ) 2/3 = 0.25 ( 12 − 6 ) 2/3 = 0.25 × ( 6 ) 2/3 = 0.25 × 3.3019 = 0.8255 A = 50 + 56 ( 1 − B ) = 50 + 56 ( 1 − 0.8255 ) = 50 + 56 ( 0.1745 ) = 59.77 A = 50 + 56(1 - B) = 50 + 56(1 - 0.8255) = 50 + 56(0.1745) = 59.77 A = 50 + 56 ( 1 − B ) = 50 + 56 ( 1 − 0.8255 ) = 50 + 56 ( 0.1745 ) = 59.77 K v = ( A + V A ) B = ( 59.77 + 1832.6 59.77 ) 0.8255 = ( 59.77 + 42.81 59.77 ) 0.8255 = ( 1.716 ) 0.8255 = 1.562 K_v = \left( \frac{A + \sqrt{V}}{A} \right)^B = \left( \frac{59.77 + \sqrt{1832.6}}{59.77} \right)^{0.8255} = \left( \frac{59.77 + 42.81}{59.77} \right)^{0.8255} = (1.716)^{0.8255} = 1.562 K v = ( A A + V ) B = ( 59.77 59.77 + 1832.6 ) 0.8255 = ( 59.77 59.77 + 42.81 ) 0.8255 = ( 1.716 ) 0.8255 = 1.562
Step 3: AGMA Tooth Bending Stress Calculation
Apply the AGMA bending stress equation: σ = W t K o K v K s P d F K m K B J \sigma = W_t K_o K_v K_s \frac{P_d}{F} \frac{K_m K_B}{J} σ = W t K o K v K s F P d J K m K B
Evaluate intermediate terms: W t K o K v K s = 450.2 × 1.25 × 1.562 × 1.0 = 879.0 lbf W_t K_o K_v K_s = 450.2 \times 1.25 \times 1.562 \times 1.0 = 879.0\text{ lbf} W t K o K v K s = 450.2 × 1.25 × 1.562 × 1.0 = 879.0 lbf P d F = 5 1.75 = 2.857 in − 2 \frac{P_d}{F} = \frac{5}{1.75} = 2.857\text{ in}^{-2} F P d = 1.75 5 = 2.857 in − 2 K m K B J = 1.22 × 1.0 0.35 = 3.486 \frac{K_m K_B}{J} = \frac{1.22 \times 1.0}{0.35} = 3.486 J K m K B = 0.35 1.22 × 1.0 = 3.486 σ = 879.0 × 2.857 × 3.486 = 8754 psi ≈ 8.75 ksi \sigma = 879.0 \times 2.857 \times 3.486 = 8754\text{ psi} \approx 8.75\text{ ksi} σ = 879.0 × 2.857 × 3.486 = 8754 psi ≈ 8.75 ksi
Bending factor of safety: S F = S t σ = 32.1 ksi 8.75 ksi = 3.67 (Highly robust against bending fatigue) S_F = \frac{S_t}{\sigma} = \frac{32.1\text{ ksi}}{8.75\text{ ksi}} = 3.67 \quad \text{(Highly robust against bending fatigue)} S F = σ S t = 8.75 ksi 32.1 ksi = 3.67 (Highly robust against bending fatigue)
Step 4: AGMA Surface Contact Stress (Pitting Resistance)
Apply the AGMA contact stress equation: σ c = Z E W t K o K v K s K m d P F C f I \sigma_c = Z_E \sqrt{W_t K_o K_v K_s \frac{K_m}{d_P F} \frac{C_f}{I}} σ c = Z E W t K o K v K s d P F K m I C f
Evaluate the terms under the square root: K m d P F = 1.22 4.00 × 1.75 = 1.22 7.00 = 0.1743 in − 2 \frac{K_m}{d_P F} = \frac{1.22}{4.00 \times 1.75} = \frac{1.22}{7.00} = 0.1743\text{ in}^{-2} d P F K m = 4.00 × 1.75 1.22 = 7.00 1.22 = 0.1743 in − 2 C f I = 1.0 0.1205 = 8.299 \frac{C_f}{I} = \frac{1.0}{0.1205} = 8.299 I C f = 0.1205 1.0 = 8.299 Radicand = 879.0 × 0.1743 × 8.299 = 1271.5 psi \text{Radicand} = 879.0 \times 0.1743 \times 8.299 = 1271.5\text{ psi} Radicand = 879.0 × 0.1743 × 8.299 = 1271.5 psi 1271.5 = 35.66 psi \sqrt{1271.5} = 35.66\sqrt{\text{psi}} 1271.5 = 35.66 psi σ c = 2300 psi × 35.66 psi = 82018 psi ≈ 82.0 ksi \sigma_c = 2300\sqrt{\text{psi}} \times 35.66\sqrt{\text{psi}} = 82018\text{ psi} \approx 82.0\text{ ksi} σ c = 2300 psi × 35.66 psi = 82018 psi ≈ 82.0 ksi
Contact factor of safety: S H = S c σ c = 109.6 ksi 82.0 ksi = 1.34 S_H = \frac{S_c}{\sigma_c} = \frac{109.6\text{ ksi}}{82.0\text{ ksi}} = 1.34 S H = σ c S c = 82.0 ksi 109.6 ksi = 1.34
Because contact stress varies with W t \sqrt{W_t} W t , AGMA practice compares S F S_F S F with S H 2 S_H^2 S H 2 , not with S H S_H S H . Here S H 2 = 1.34 2 = 1.79 S_H^2 = 1.34^2 = 1.79 S H 2 = 1.3 4 2 = 1.79 is well below S F = 3.67 S_F = 3.67 S F = 3.67 , so pitting (wear) is the threat that governs this gearset.