Study guide

13.2 Construction, Roadside, and Work-Zone Safety

PE Civil: Structural Exam

Track your progress as you read

Finished sections get a check mark.

1 Exam Identity and Reference Workflow

2026 PE Civil: Structural Identity, Format, and Scoring Electronic Handbook, Design Standards, Units, and Version Control

2 Chapter 2: Gravity and Construction Loads

2.1 Dead Loads and Self-Weight 2.2 Live Loads, Reduction, and Load Placement 2.3 Construction-Stage Loads

3 Environmental Loads

Wind Loads and Pressure Paths Seismic Loads and Lateral Force Distribution Snow, Rain, and Ice Loads

4 Moving, Impact, and Lateral Soil Loads

Vehicular, Crane, and Other Moving Loads Impact and Dynamic Allowances Earth Pressure and Surcharge Loads

5 Chapter 5: Load Paths and Combinations

5.1 Tributary Areas and Complete Vertical/Lateral Load Paths 5.2 Strength and Service Load Combinations

6 Reactions, Diagrams, and Basic Axial Effects

Free-Body Diagrams, Reactions, Shear, and Moment Qualitative Diagrams, Influence Lines, and Critical Placement Axial Tension, Compression, and Deformation

7 Chapter 7: Axial Systems and Shear Effects

7.1 Trusses, Braces, and Column Axial Force 7.2 Shear Stress, Shear Flow, and Built-Up Sections 7.3 One-Way, Two-Way, Punching, and Interface Shear Effects

8 Flexure

Section Properties and Elastic Flexural Stress Beam and Slab Flexural Load Effects Biaxial and Unsymmetrical Flexure

9 Combined Stress and Deflection

Combined Axial and Flexural Stress Principal Stress, Mohr's Circle, and Combined Shear Elastic Deflection Methods

10 Chapter 10: Serviceability, Torsion, and Stability

10.1 Serviceability: Deflection, Drift, Vibration, and Ponding 10.2 Torsion and Warping Effects 10.3 Buckling, Effective Length, and Second-Order Stability

11 Fatigue, Robustness, Thermal, and Bearing Effects

Fatigue and Progressive-Collapse Concepts Thermal Deformation and Bearing/Contact Stress

12 Inspections, Submittals, and Adjacent Facilities

Special Inspections and Verification Duties Shop Drawings, Submittals, RFIs, and Delegated Design Construction Effects on Adjacent Facilities

13 Chapter 13: Temporary Works and Safety

13.1 Formwork, Falsework, Scaffolding, Shoring/Reshoring, Bracing, and Anchorage 13.2 Construction, Roadside, and Work-Zone Safety

14 Soils and Core Concrete Properties

Soil Phase Relationships and Classification Soil Strength, Permeability, and Compressibility Fresh and Hardened Concrete Properties

15 Chapter 15: Prestressed Concrete and Steel Properties

15.1 Reinforced, Precast, Pretensioned, and Post-Tensioned Concrete Materials 15.2 Structural and Cold-Formed Steel Properties 15.3 Steel Toughness, Weldability, Corrosion, and Temperature Effects

16 Timber, Masonry, and Material Conformance

Timber Properties and ASD Design Values Masonry, CMU, Mortar, Grout, and Brick Veneer Properties Concrete and Masonry Test Methods Steel, Timber, and Other Material Specification Conformance

17 Horizontal Members I

Steel Beams and Girders Reinforced Concrete Beams and Slabs Timber and Masonry Horizontal Members

18 Chapter 18: Diaphragms and Vertical Members

18.1 Diaphragms, Collectors, Struts, and Composite Slabs 18.2 Steel Columns and Beam-Columns 18.3 Concrete Columns and Bearing Walls

19 Shear Walls, Trusses, and Frames

Shear Walls and Vertical Lateral Members Trusses and Braced Systems Moment Frames and Stability Systems

20 Composite/Bridge Systems and Bolted Connections

Composite Construction and Structural System Selection Bridge Systems and Load Distribution Bolted Steel Connections

21 Chapter 21: Welded, Embedded, and Anchored Connections

21.1 Welded Steel Connections 21.2 Bearing, Embedded, and Precast Connections 21.3 Anchors, Post-Installed Anchors, and Wood/Masonry Connections

22 Shallow Foundations

Isolated, Spread, and Strip Footings Combined and Strap Footings Mat Foundations and Foundation Slabs

23 Deep Foundations

Driven Piles: Axial Capacity and Settlement Drilled Shafts, Piers, and Caissons Pile Groups, Caps, and Lateral Deep-Foundation Response

24 Chapter 24: Retaining Structures

24.1 Lateral Earth/Water Pressure and Drainage 24.2 Sliding, Overturning, Bearing, and Global Stability 24.3 Concrete Cantilever, Gravity, and Basement Walls 24.4 Sheet-Pile, Anchored, and Mechanically Stabilized Earth Walls

13.2 Construction, Roadside, and Work-Zone Safety

Key Takeaways Explain This Topic AI

For this 2026 exam, answer OSHA questions from only the NCEES-supplied July 2020 Title 29 CFR excerpts and the facts given; current-web language is not the controlled exam text.

Identify the applicable operation, hazard, responsible role, and required control before searching the supplied excerpt for a threshold or exception.

A competent person identifies existing and predictable hazards and has authority for prompt correction; do not substitute a job title for the role's required capability and authority.

Fall, scaffold, steel-erection, and concrete-construction controls must match the actual stage, access route, anchorage, falling-object exposure, and changing site conditions.

Roadside and work-zone planning separates workers from public and construction traffic through coordinated control devices, visibility, escape space, equipment movement, access, and inspection.

When conditions change or a protective system is struck, moved, overloaded, or undermined, reassess before resuming exposed work.

Last updated: July 2026

Safety questions are decisions about hazards, roles, and controls—not invitations to rely on a remembered slogan. For a July 2026 PE Civil: Structural exam, the controlled safety reference is only the specified portions of Title 29 CFR Parts 1910 and 1926 supplied by NCEES, dated July 2020 . Use the exact supplied excerpt for numerical thresholds, definitions, exceptions, and prescribed systems. Do not present current OSHA web text, an unsupplied subpart, a state-plan rule, or a later revision as though it were the exam reference. Real work still follows current applicable law.

Hazard-to-Control Workflow

Name the operation. Examples include scaffold erection, steel connection, concrete placement, form stripping, work beside traffic, or vehicle backing.

Identify the exposure. Look for falls, falling objects, collapse, struck-by, caught-between, electrical contact, impalement, moving equipment, public traffic, or changing ground support.

Identify the role. Determine what the employer, competent person, qualified person, operator, signaler, or exposed worker must decide or do under the supplied text.

Select the control family. Consider elimination or separation, engineered protection, work practice and access controls, and required personal protective equipment.

Look up exact requirements. Search the supplied July 2020 excerpt for the operation and verify definitions, limits, alternatives, and exceptions.

Reassess after change. Weather, impact, relocation, new equipment, removed guardrails, shifted traffic, or altered sequence can invalidate the original control.

A competent person is not simply the most senior worker. The supplied definition ties the role to recognizing existing and predictable hazards plus authority to correct them promptly. A qualified person has the knowledge, training, experience, or recognized standing required for the technical problem under the applicable definition. One individual may satisfy both roles, but the titles are not automatically interchangeable.

Falls and Falling Objects

Determine where workers stand, how they arrive, what edges or openings exist, and what changes during the task. The supplied provisions may require a guardrail system, personal fall-arrest system, safety net, covers, controlled access, or another identified method depending on the operation. Do not invent a universal height threshold from memory; retrieve the applicable value and exception from the furnished excerpt.

Personal fall arrest requires a complete system and suitable anchorage, connection, clearance, and compatible equipment. Tying to an unverified handrail, temporary brace, or scaffold component can transfer force into something not designed as an anchor. Falling-object exposure may need toe boards, screens, canopies, barricaded zones, material control, or another supplied measure; protecting the worker at elevation does not protect people below.

Scaffold, Steel, and Concrete Work

For a scaffold , check foundation and base support, planking or platform condition, load and material storage, ties and braces, safe access, fall protection, falling-object protection, power-line exposure, and inspection after erection, alteration, movement, impact, or adverse conditions. Erection, dismantling, or modification must follow the role and supervision provisions in the supplied excerpt. Never remove a brace merely to improve access without reevaluation.

For steel erection , focus on stability throughout hoisting and connection: rigging and suspended-load exposure, landing and securing members, connector access, temporary connections, decking or openings, fall exposure, and the effect of releasing the crane. A member that is stable while held by the hoist may become unstable at release. The erection sequence and temporary bracing must agree with the structural plan.

For concrete construction , consider forms and shores, reinforcing-steel impalement, placement equipment, limited or controlled access where applicable, premature form removal, and the strength needed before load transfer. Structural calculations establish capacity; the supplied OSHA provisions establish safety duties within their scope. Passing one does not automatically satisfy the other.

Roadside and Work-Zone Exposure

A work zone must guide road users while providing workers a survivable work area. Identify the advance warning, transition, activity, and termination functions shown in the problem; channelize traffic through a clear path and protect the work space as the applicable supplied material and scenario require. Consider vehicle speed and trajectory, barriers or other separation, device visibility, lighting and glare, flagger or signaler position, communication, and an escape route. Do not stand where an errant public vehicle or reversing construction truck can pin a worker against equipment or a rigid object.

Construction access crossing public traffic needs coordinated entry and exit, sight distance, delivery timing, and control of backing or blind spots. High-visibility apparel or signaling requirements must be taken from the supplied excerpt rather than a remembered current manual. Inspect after traffic shifts, device displacement, weather, darkness, or changes in work limits.

Worked Changing-Condition Scenario

A crew works from a tied scaffold beside an open traffic lane to repair a concrete pier. Overnight, a vehicle strikes a channelizing device and the scaffold base settles after rain. The morning task is not “continue carefully.” Apply the workflow:

Stop exposure and keep workers off the affected scaffold and out of the compromised roadside area.

Restore or revise traffic separation before placing personnel where public traffic can reach them.

Have the required competent person reassess the scaffold base, plumbness, ties, braces, platform, access, fall protection, and falling-object zone under the supplied provisions.

Inspect temporary anchorage and the supporting ground; obtain technical evaluation where the change exceeds the competent person's authority or expertise.

Reestablish access, escape space, device visibility, and communication for traffic and construction equipment.

Resume only after deficiencies are corrected and required authorization or inspection is complete.

The scenario integrates roadside and construction hazards: fixing only the displaced device leaves scaffold instability, while leveling the scaffold alone leaves traffic exposure.

Exam Discipline

Read role words and exceptions closely. Confirm any precise threshold in the July 2020 excerpt; memory or current-web practice is not controlled exam evidence.