Study guide
10.3 Manning, Open Channel, and Critical Flow
NCEES PE Civil: Water Resources and Environmental Exam Exam
Track your progress as you read
Finished sections get a check mark.
1 Chapter 1: NCEES WRE Exam Spec and Reference Strategy
1.1 NCEES WRE Format 1.2 Reference Handbook and Units 1.3 Blueprint Prioritization
2 Chapter 6: WRE Project Planning, Cost, and Engineering Economics
6.1 Quantity Takeoff and Unit Basis 6.2 Cost Estimating and Bid Item Logic 6.3 Schedules, Sequencing, and Critical Path 6.4 Present Worth, Life-Cycle Cost, and Sustainability
3 Chapter 7: Soil Mechanics for WRE Problems
7.1 Lateral Earth Pressure and Retaining Situations 7.2 Consolidation, Compaction, and Settlement 7.3 Bearing Capacity and Slope Stability 7.4 Soil Data, Boring Logs, and Unit Conversions
4 Chapter 8: WRE Analysis and Hydraulic Design Foundations
8.1 Mass Balance and Hydraulic Loading 8.2 Solids Loading and Sludge Mass Balance 8.3 Hydraulic Flow Measurement and Instrumentation 8.4 Design Checks, Safety Factors, and Reasonableness
5 Chapter 9: WRE Hydrology, Runoff, and Storage Routing
9.1 Design Storms, IDF, and Time of Concentration 9.2 Rational Method and Peak Flow Limits 9.3 NRCS Curve Number and Unit Hydrographs 9.4 Detention, Retention, and Routing Checks
6 Chapter 10: Closed Conduit and Open Channel Hydraulics
10.1 Continuity, Energy, and HGL/EGL 10.2 Pipe Flow Losses, Pumps, and Net Head 10.3 Manning, Open Channel, and Critical Flow 10.4 Culverts, Weirs, Orifices, and Control Sections
7 Chapter 11: Groundwater, Wells, and Aquifer Flow
11.1 Darcy Law, Gradient, and Flow Area 11.2 Confined and Unconfined Aquifers and Storage 11.3 Well Drawdown, Specific Capacity, and Interference 11.4 Contaminant Transport and Dewatering Decisions
8 Chapter 12: Water Quality Chemistry and Pollutant Loading
12.1 Concentration, Load, and Mass-Rate Conversions 12.2 BOD, CBOD, DO, and Oxygen Demand 12.3 Nutrients, pH, Alkalinity, and Buffering 12.4 Pollutant Allocation, TMDL, and Water Quality Criteria
9 Chapter 13: Water Treatment Processes and Design Checks
13.1 Coagulation, Flocculation, and Sedimentation 13.2 Filtration, Disinfection, and CT Logic 13.3 Softening, Iron, Manganese, and Chemical Feed 13.4 Treatment Plant Hydraulics and Operations
10 Chapter 14: Wastewater Collection, Treatment, and Sludge
14.1 Collection-System Hydraulics and Infiltration 14.2 Preliminary, Primary, and Secondary Treatment 14.3 Nutrient Removal and Effluent Quality 14.4 Sludge Processing, Digestion, and Dewatering
11 Chapter 3: Water Quality, Treatment, and Sitework
Water Quality and Regulation Drinking Water and Wastewater Treatment Project Sitework and Final Review
12 Chapter 15: Sitework, Drainage, and Erosion Control
15.1 Grading, Cut/Fill, and Earthwork Balancing 15.2 Storm Drain Inlets and Minor Systems 15.3 Erosion, Sediment Control, and BMPs 15.4 Permitting, Constructability, and Field Adjustments
13 Chapter 4: Materials, Analysis, and Design for WRE
4.1 Materials and Pipe Selection 4.2 Analysis and Design Workflow 4.3 Site-Civil Constructability
14 Chapter 16: Materials, Pipes, Standards, and Reference Navigation
16.1 Pipe Material Selection and Failure Modes 16.2 Concrete, Soil, and Geosynthetic Materials 16.3 Design Standard Navigation and Revision Years 16.4 Reference Search Drills and Unit Checks
15 Chapter 18: Pumps, Distribution, and Collection Systems
18.1 Pump Curves, System Curves, and Operating Point 18.2 Water Distribution Pressure, Demand, and Storage 18.3 Sewer Collection, Lift Stations, and Force Mains 18.4 Transient, Surge, and Operational Troubleshooting
16 Chapter 19: WRE Calculation Workbook and Unit Drills
19.1 Flow, Concentration, and Load Workbook 19.2 Hydraulics Energy and Head Workbook 19.3 Treatment and Process Sizing Workbook 19.4 Error Patterns and Repair Drills
17 Chapter 5: Mixed Practice, Units, and Final Review
Formula Selection and Units Mixed WRE Mock Review Exam Day and Spec Transition
18 Chapter 17: Full-Length WRE Mixed Practice and Final Review
17.1 Eighty-Question Mock Exam Plan 17.2 Miss-Log Diagnostics by Domain 17.3 Calculator, Reference, and Break Strategy 17.4 Final-Week Current vs 2027 Spec Check
10.3 Manning, Open Channel, and Critical Flow
Key Takeaways Explain This Topic AI
Manning's equation, Q = (1.49/n) A R^(2/3) S^(1/2) in US units (coefficient 1.0 in SI), estimates uniform open-channel capacity.
Hydraulic radius R = A/P (wetted area over wetted perimeter), not flow depth, except as a rough approximation in very wide channels.
Normal depth is the uniform-flow depth for a given flow, slope, roughness, and shape; it need not equal the actual depth near a control.
Critical flow occurs at Froude number Fr = 1 and minimum specific energy; for a rectangular channel y_c = (q^2/g)^(1/3) with q = Q/b.
Subcritical flow (Fr < 1) is deep, slow, and downstream-controlled; supercritical flow (Fr > 1) is shallow, fast, and upstream-controlled.
Last updated: June 2026
Uniform Flow, Control, and Flow Regime
Open-channel hydraulics differs from pressure-pipe hydraulics because the water surface is exposed to the atmosphere and can adjust its depth. The NCEES WRE specification includes open-channel flow, hydraulic grade lines, energy dissipation, stormwater drainage, and subcritical and supercritical flow. The exam often asks which hydraulic model applies before it asks for a number, so identify the regime and the controlling depth first.
Manning's Equation
In US customary units, Manning's equation is Q = (1.49/n) A R^(2/3) S^(1/2) ; in SI the coefficient is 1.0. Here A is wetted flow area, R = A/P is hydraulic radius, P is wetted perimeter, S is the energy slope (equal to the channel slope under uniform flow), and n is the Manning roughness. Typical n values: smooth concrete ~0.012-0.015, earth ~0.022-0.030, natural channels with vegetation ~0.035-0.05+. A small n error scales Q almost linearly, so confirm the surface description.
- Channel change Effect on Q if other terms fixed
- Larger area A Increases Q
- Larger hydraulic radius R Increases Q
- Steeper slope S Increases Q (square-root sensitivity)
- Larger roughness n Decreases Q
- More wetted perimeter for same area Decreases R and Q
A frequent PE mistake is substituting flow depth for hydraulic radius. For a rectangular channel A = by and P = b + 2y, so R = by/(b + 2y). Only in a very wide channel (b much greater than y) does R approach the depth y. Always build A, P, and R from the actual geometry.
Normal Depth Workflow
Normal depth is the depth that makes Manning capacity equal the given flow in a prismatic channel under uniform-flow assumptions:
Identify the channel shape and write A, P, and R as functions of depth y.
Insert the given n and slope S.
Substitute into Manning's equation.
Iterate, or test the answer choices, until computed Q matches the required Q.
Confirm the depth is physically possible within the section.
Normal depth is not automatically the water depth at a culvert entrance, spillway, bridge opening, or abrupt slope break. Those are controls. A control section fixes a depth-discharge relationship and produces gradually varied (nonuniform) flow upstream or downstream.
Critical Flow and Specific Energy
Specific energy is energy per unit weight measured from the channel bottom: E = y + V^2/(2g). For a given flow and shape, critical depth occurs at the minimum specific energy. The Froude number Fr = V/sqrt(gD_h), where D_h is hydraulic depth A/T (top width T), sets the regime: Fr < 1 is subcritical (deep, slower, influenced by downstream conditions); Fr > 1 is supercritical (shallow, faster, controlled from upstream); Fr = 1 is critical.
For a rectangular channel, critical depth has a convenient closed form: y_c = (q^2/g)^(1/3) , where q = Q/b is the unit discharge. This appears repeatedly in weir, spillway, culvert, and transition problems, so memorize it. At critical depth the minimum specific energy in a rectangular channel is E_min = 1.5 y_c.
Hydraulic Jumps and Energy Dissipation
A hydraulic jump occurs where supercritical flow transitions to subcritical flow. Depth rises sharply from y1 to the conjugate depth y2, velocity drops, and energy is dissipated as turbulence. Across the jump you apply the momentum equation, not Bernoulli , because energy is lost. For a rectangular channel the conjugate-depth ratio is y2/y1 = 0.5[sqrt(1 + 8 Fr1^2) - 1]. The exam often asks conceptually why a stilling basin, drop structure, plunge pool, or riprap apron is placed downstream of a culvert or spillway: to force or contain the jump and protect the channel.
Exam-Ready Checks
Use Manning only when uniform flow is reasonable or explicitly requested.
Compare normal depth to critical depth to classify the slope (mild vs steep) and the likely control.
Subcritical profiles respond to downstream controls; supercritical profiles respond to upstream controls.
Expect supercritical flow near steep outlets and energy-dissipation structures.
Keep units paired: cfs with ft, or m^3/s with m, never mixed.
Label exactly which depth is requested: normal depth, critical depth, actual depth at a control, or conjugate depth after a jump are different quantities.
Slope Classification and Profiles
Comparing normal depth (y_n) to critical depth (y_c) classifies the channel and tells you which gradually varied flow profile to expect. If y_n > y_c the slope is mild (M); if y_n < y_c the slope is steep (S); if y_n = y_c the slope is critical (C). On a mild slope, uniform flow is subcritical and the channel is downstream-controlled; on a steep slope, uniform flow is supercritical and upstream-controlled. The exam may ask you to name the profile (M1 backwater behind a dam, M2 drawdown to a free overfall, S1, S2, and so on) rather than to compute a number.
Recognizing that a backwater curve forms upstream of an obstruction on a mild slope, or that a drawdown forms approaching a free overfall, is frequently enough to pick the answer.
Worked Mini-Example
A trapezoidal channel has a 6 ft bottom width, side slopes of 2 horizontal to 1 vertical, n = 0.025, and a slope of 0.001 ft/ft carrying 200 cfs. At a trial depth y, area A = (b + zy)y = (6 + 2y)y and wetted perimeter P = b + 2y sqrt(1 + z^2) = 6 + 2y sqrt(5). At y = 3 ft: A = (6 + 6)(3) = 36 ft^2, P = 6 + 6(2.236) = 19.4 ft, R = 1.86 ft, and Q = (1.49/0.025)(36)(1.86^0.667)(0.001^0.5) = about 100 cfs, too low. Increasing the trial depth raises both A and R, so you iterate upward until computed Q matches 200 cfs (near y is about 4.6 ft).
This iteration is the heart of every normal-depth item: build A, P, and R as functions of depth, then converge. On the CBT, plugging the four answer choices in directly is often faster than blind iteration.