Study guide

1.2 Reference Handbook and Units

NCEES PE Civil: Water Resources and Environmental Exam Exam

Track your progress as you read

Finished sections get a check mark.

1 Chapter 1: NCEES WRE Exam Spec and Reference Strategy

1.1 NCEES WRE Format 1.2 Reference Handbook and Units 1.3 Blueprint Prioritization

2 Chapter 6: WRE Project Planning, Cost, and Engineering Economics

6.1 Quantity Takeoff and Unit Basis 6.2 Cost Estimating and Bid Item Logic 6.3 Schedules, Sequencing, and Critical Path 6.4 Present Worth, Life-Cycle Cost, and Sustainability

3 Chapter 7: Soil Mechanics for WRE Problems

7.1 Lateral Earth Pressure and Retaining Situations 7.2 Consolidation, Compaction, and Settlement 7.3 Bearing Capacity and Slope Stability 7.4 Soil Data, Boring Logs, and Unit Conversions

4 Chapter 8: WRE Analysis and Hydraulic Design Foundations

8.1 Mass Balance and Hydraulic Loading 8.2 Solids Loading and Sludge Mass Balance 8.3 Hydraulic Flow Measurement and Instrumentation 8.4 Design Checks, Safety Factors, and Reasonableness

5 Chapter 9: WRE Hydrology, Runoff, and Storage Routing

9.1 Design Storms, IDF, and Time of Concentration 9.2 Rational Method and Peak Flow Limits 9.3 NRCS Curve Number and Unit Hydrographs 9.4 Detention, Retention, and Routing Checks

6 Chapter 10: Closed Conduit and Open Channel Hydraulics

10.1 Continuity, Energy, and HGL/EGL 10.2 Pipe Flow Losses, Pumps, and Net Head 10.3 Manning, Open Channel, and Critical Flow 10.4 Culverts, Weirs, Orifices, and Control Sections

7 Chapter 11: Groundwater, Wells, and Aquifer Flow

11.1 Darcy Law, Gradient, and Flow Area 11.2 Confined and Unconfined Aquifers and Storage 11.3 Well Drawdown, Specific Capacity, and Interference 11.4 Contaminant Transport and Dewatering Decisions

8 Chapter 12: Water Quality Chemistry and Pollutant Loading

12.1 Concentration, Load, and Mass-Rate Conversions 12.2 BOD, CBOD, DO, and Oxygen Demand 12.3 Nutrients, pH, Alkalinity, and Buffering 12.4 Pollutant Allocation, TMDL, and Water Quality Criteria

9 Chapter 13: Water Treatment Processes and Design Checks

13.1 Coagulation, Flocculation, and Sedimentation 13.2 Filtration, Disinfection, and CT Logic 13.3 Softening, Iron, Manganese, and Chemical Feed 13.4 Treatment Plant Hydraulics and Operations

10 Chapter 14: Wastewater Collection, Treatment, and Sludge

14.1 Collection-System Hydraulics and Infiltration 14.2 Preliminary, Primary, and Secondary Treatment 14.3 Nutrient Removal and Effluent Quality 14.4 Sludge Processing, Digestion, and Dewatering

11 Chapter 3: Water Quality, Treatment, and Sitework

Water Quality and Regulation Drinking Water and Wastewater Treatment Project Sitework and Final Review

12 Chapter 15: Sitework, Drainage, and Erosion Control

15.1 Grading, Cut/Fill, and Earthwork Balancing 15.2 Storm Drain Inlets and Minor Systems 15.3 Erosion, Sediment Control, and BMPs 15.4 Permitting, Constructability, and Field Adjustments

13 Chapter 4: Materials, Analysis, and Design for WRE

4.1 Materials and Pipe Selection 4.2 Analysis and Design Workflow 4.3 Site-Civil Constructability

14 Chapter 16: Materials, Pipes, Standards, and Reference Navigation

16.1 Pipe Material Selection and Failure Modes 16.2 Concrete, Soil, and Geosynthetic Materials 16.3 Design Standard Navigation and Revision Years 16.4 Reference Search Drills and Unit Checks

15 Chapter 18: Pumps, Distribution, and Collection Systems

18.1 Pump Curves, System Curves, and Operating Point 18.2 Water Distribution Pressure, Demand, and Storage 18.3 Sewer Collection, Lift Stations, and Force Mains 18.4 Transient, Surge, and Operational Troubleshooting

16 Chapter 19: WRE Calculation Workbook and Unit Drills

19.1 Flow, Concentration, and Load Workbook 19.2 Hydraulics Energy and Head Workbook 19.3 Treatment and Process Sizing Workbook 19.4 Error Patterns and Repair Drills

17 Chapter 5: Mixed Practice, Units, and Final Review

Formula Selection and Units Mixed WRE Mock Review Exam Day and Spec Transition

18 Chapter 17: Full-Length WRE Mixed Practice and Final Review

17.1 Eighty-Question Mock Exam Plan 17.2 Miss-Log Diagnostics by Domain 17.3 Calculator, Reference, and Break Strategy 17.4 Final-Week Current vs 2027 Spec Check

1.2 Reference Handbook and Units

Key Takeaways Explain This Topic AI

For active pre-April-2027 WRE exams, the supplied references are the NCEES PE Civil Reference Handbook plus TSS Recommended Standards for Wastewater Facilities (2014) and TSS Recommended Standards for Water Works (2018).

Personal notes, printed handbooks, outside PDFs, and candidate-supplied design standards are prohibited in the exam room.

Standards are supplied as searchable electronic PDFs broken into individual chapters; only one chapter can be open and searched at a time.

Solutions are scored against the listed standards and revision years only; answers based on other standards receive no credit.

The WRE specification uses both SI and U.S. Customary units, so dimensional setup is a first-pass scoring skill, not final cleanup.

Last updated: June 2026

Treat References as Test Tools

The PE Civil WRE exam is closed book with electronic references . Under the active April 2024 specification, NCEES supplies the PE Civil Reference Handbook plus two design standards : the Recommended Standards for Wastewater Facilities (2014) and the Recommended Standards for Water Works (2018) — both published by the Great Lakes—Upper Mississippi River Board (often abbreviated TSS for the "Ten States Standards" / Ten-State Standards lineage). Personal copies, printed binders, handwritten notes, and outside PDFs are not allowed in the testing room.

That policy reshapes how you study. Your goal is not to memorize every equation in hydrology, pipe flow, open-channel flow, treatment, groundwater, or sitework. Your goal is to know which reference family controls the problem, navigate to it fast, and confirm the variables and units match the item.

Supplied reference (pre-April-2027) Best use Practice habit

PE Civil Reference Handbook Equations, constants, definitions, charts, unit relationships Use the current MyNCEES PDF on every timed set.

Recommended Standards for Wastewater Facilities (2014) Wastewater design criteria (loading rates, detention, clarifier overflow) Locate criteria by treatment unit, not from memory.

Recommended Standards for Water Works (2018) Drinking-water criteria (demand, storage, filtration, disinfection) Search by facility type, demand term, and process name.

Memorize the handbook's table of contents structure , not its contents. Knowing that, for example, open-channel relations and Manning's equation live in the water-resources section saves a minute per lookup across 80 items.

A common trap is assuming the handbook contains everything. It does not contain the design criteria that the two standards carry — clarifier surface overflow rates, filtration loading limits, minimum detention times, recommended distribution storage. Those are scored against the Recommended Standards documents, so a candidate who only practices from the handbook will fail to recognize when a question is really a standards-lookup. Train yourself to ask, on every wastewater or drinking-water item, "is this a handbook equation or a standards criterion?" before searching.

How Electronic Search Changes the Work

The handbook and both standards are searchable electronic PDFs available the entire exam , but the standards are split into individual chapters , and only one chapter can be opened and searched at a time so the software handles the large files efficiently. That means you cannot keyword-search across an entire standard at once; you must first guess the correct chapter, then search within it. During preparation, never build habits around browser tabs, sticky notes, or a giant personal equation sheet you will not have.

A high-value reference drill: solve each practice problem twice . First, solve it normally. Second, write the exact navigation path you used — reference (handbook or which standard), chapter, search term, equation label or table number, and the unit trap. Over weeks this builds navigation muscle memory that survives the one-chapter-at-a-time constraint.

Units Are a First-Pass Decision

The WRE specification uses both the International System of Units (SI) and the U.S. Customary System (USCS) . A large share of misses occur before any engineering begins : gallons per minute mixed with cubic feet per second, million gallons per day (MGD) converted too late, milligrams per liter (mg/L) treated as a mass instead of a concentration, or head and pressure dropped into one equation without conversion (1 psi ≈ 2.31 ft of water head).

Apply this unit process to every quantitative item:

Restate the target unit before opening any reference.

Convert flow, area, and time units before substituting into an equation.

Keep concentration-load problems dimensional end to end (the load equation lb/day = flow MGD × concentration mg/L × 8.34 is a top-five WRE workhorse).

Use the handbook conversion factor that matches the requested unit system, not a remembered approximation.

Sanity-check the magnitude against the facility or watershed scale.

High-frequency WRE unit contexts include MGD, gpm, cfs, acre-feet, ft of head, psi, mg/L, lb/day, ft², acres, and cubic yards . Recurring conceptual traps: flow versus load, peak rate versus runoff volume, energy grade line (EGL) versus hydraulic grade line (HGL), and open-channel versus pressurized-flow assumptions.

Standard-Year Discipline

When a question references a design standard, NCEES scores only against the standards and revision years listed in the active specification — solutions based on other standards or editions receive no credit. For pre-April-2027 exams that means the 2014 Wastewater and 2018 Water Works editions specifically. The April 2027 specification revises this list, so candidates testing after the transition must not assume the same references or revision years.

A Worked Reference-and-Unit Example

Consider a circulating-water item: a pump delivers 700 gpm through a pipe and you must report flow in cfs to use a handbook headloss chart. Apply the unit process first. The conversion 1 cfs = 448.8 gpm lives in the handbook's conversion tables, so 700 gpm / 448.8 = 1.56 cfs . Only now open the headloss reference, because the chart's axis is in cfs. A candidate who skips the conversion and reads the chart at "700" lands three orders of magnitude off and wastes the item.

Now extend it to load: if that same flow is 1.0 MGD of secondary effluent at 30 mg/L total suspended solids, the daily solids load is 1.0 × 30 × 8.34 = 250 lb/day . The dimensional discipline — pairing MGD with mg/L and the 8.34 factor — is what makes the answer trustworthy, and it is the same pattern the practice and flashcard sets drill repeatedly. Keep the workflow consistent: target unit first, conversion factor from the supplied reference, substitution last, magnitude check at the end.