Study guide
17.1 Eighty-Question Mock Exam Plan
NCEES PE Civil: Water Resources and Environmental Exam Exam
Track your progress as you read
Finished sections get a check mark.
1 Chapter 1: NCEES WRE Exam Spec and Reference Strategy
1.1 NCEES WRE Format 1.2 Reference Handbook and Units 1.3 Blueprint Prioritization
2 Chapter 6: WRE Project Planning, Cost, and Engineering Economics
6.1 Quantity Takeoff and Unit Basis 6.2 Cost Estimating and Bid Item Logic 6.3 Schedules, Sequencing, and Critical Path 6.4 Present Worth, Life-Cycle Cost, and Sustainability
3 Chapter 7: Soil Mechanics for WRE Problems
7.1 Lateral Earth Pressure and Retaining Situations 7.2 Consolidation, Compaction, and Settlement 7.3 Bearing Capacity and Slope Stability 7.4 Soil Data, Boring Logs, and Unit Conversions
4 Chapter 8: WRE Analysis and Hydraulic Design Foundations
8.1 Mass Balance and Hydraulic Loading 8.2 Solids Loading and Sludge Mass Balance 8.3 Hydraulic Flow Measurement and Instrumentation 8.4 Design Checks, Safety Factors, and Reasonableness
5 Chapter 9: WRE Hydrology, Runoff, and Storage Routing
9.1 Design Storms, IDF, and Time of Concentration 9.2 Rational Method and Peak Flow Limits 9.3 NRCS Curve Number and Unit Hydrographs 9.4 Detention, Retention, and Routing Checks
6 Chapter 10: Closed Conduit and Open Channel Hydraulics
10.1 Continuity, Energy, and HGL/EGL 10.2 Pipe Flow Losses, Pumps, and Net Head 10.3 Manning, Open Channel, and Critical Flow 10.4 Culverts, Weirs, Orifices, and Control Sections
7 Chapter 11: Groundwater, Wells, and Aquifer Flow
11.1 Darcy Law, Gradient, and Flow Area 11.2 Confined and Unconfined Aquifers and Storage 11.3 Well Drawdown, Specific Capacity, and Interference 11.4 Contaminant Transport and Dewatering Decisions
8 Chapter 12: Water Quality Chemistry and Pollutant Loading
12.1 Concentration, Load, and Mass-Rate Conversions 12.2 BOD, CBOD, DO, and Oxygen Demand 12.3 Nutrients, pH, Alkalinity, and Buffering 12.4 Pollutant Allocation, TMDL, and Water Quality Criteria
9 Chapter 13: Water Treatment Processes and Design Checks
13.1 Coagulation, Flocculation, and Sedimentation 13.2 Filtration, Disinfection, and CT Logic 13.3 Softening, Iron, Manganese, and Chemical Feed 13.4 Treatment Plant Hydraulics and Operations
10 Chapter 14: Wastewater Collection, Treatment, and Sludge
14.1 Collection-System Hydraulics and Infiltration 14.2 Preliminary, Primary, and Secondary Treatment 14.3 Nutrient Removal and Effluent Quality 14.4 Sludge Processing, Digestion, and Dewatering
11 Chapter 3: Water Quality, Treatment, and Sitework
Water Quality and Regulation Drinking Water and Wastewater Treatment Project Sitework and Final Review
12 Chapter 15: Sitework, Drainage, and Erosion Control
15.1 Grading, Cut/Fill, and Earthwork Balancing 15.2 Storm Drain Inlets and Minor Systems 15.3 Erosion, Sediment Control, and BMPs 15.4 Permitting, Constructability, and Field Adjustments
13 Chapter 4: Materials, Analysis, and Design for WRE
4.1 Materials and Pipe Selection 4.2 Analysis and Design Workflow 4.3 Site-Civil Constructability
14 Chapter 16: Materials, Pipes, Standards, and Reference Navigation
16.1 Pipe Material Selection and Failure Modes 16.2 Concrete, Soil, and Geosynthetic Materials 16.3 Design Standard Navigation and Revision Years 16.4 Reference Search Drills and Unit Checks
15 Chapter 18: Pumps, Distribution, and Collection Systems
18.1 Pump Curves, System Curves, and Operating Point 18.2 Water Distribution Pressure, Demand, and Storage 18.3 Sewer Collection, Lift Stations, and Force Mains 18.4 Transient, Surge, and Operational Troubleshooting
16 Chapter 19: WRE Calculation Workbook and Unit Drills
19.1 Flow, Concentration, and Load Workbook 19.2 Hydraulics Energy and Head Workbook 19.3 Treatment and Process Sizing Workbook 19.4 Error Patterns and Repair Drills
17 Chapter 5: Mixed Practice, Units, and Final Review
Formula Selection and Units Mixed WRE Mock Review Exam Day and Spec Transition
18 Chapter 17: Full-Length WRE Mixed Practice and Final Review
17.1 Eighty-Question Mock Exam Plan 17.2 Miss-Log Diagnostics by Domain 17.3 Calculator, Reference, and Break Strategy 17.4 Final-Week Current vs 2027 Spec Check
17.1 Eighty-Question Mock Exam Plan
Key Takeaways Explain This Topic AI
The PE Civil Water Resources and Environmental (WRE) exam is 80 questions delivered in two roughly 40-question sessions inside a 9.5-hour appointment: 2-minute non-disclosure agreement, 8-minute tutorial, 8.5 hours of testing, and one 50-minute scheduled break.
Once you submit a session you cannot return to it, so a realistic mock must lock each 40-question block before moving on.
The April 2024 WRE specification is depth-only across all 12 domains; the pre-2024 morning-breadth, afternoon-depth split is retired and should not be practiced.
Allocate heavier mock coverage to high-range domains: hydrology (8-12), closed conduit (7-11), open channel (7-11), wastewater (7-11), and project sitework (9-14).
Post-mock diagnosis matters more than the raw percentage; classify every miss by domain, cause, time, and corrective action before retesting.
Last updated: June 2026
Purpose of the Full-Length Mock
The full-length mock is the final stress test for PE Civil Water Resources and Environmental (WRE) readiness. The current exam, effective for appointments before April 2027, is computer-based testing (CBT) , closed book with searchable electronic references, and contains 80 questions delivered in two sessions of about 40 questions each . NCEES schedules a 9.5-hour appointment : a 2-minute non-disclosure agreement, an 8-minute tutorial, 8.5 hours of testing time , and one 50-minute scheduled break taken between the two sessions.
The single most important format rule to rehearse: once a session is submitted, it cannot be reopened. You cannot carry an unfinished hydraulics problem from session 1 into session 2. Your mock must enforce this so you never discover the rule on exam day.
The April 2024 specification is depth-only . Candidates work every question across all 12 WRE domains; the old morning-breadth, afternoon-depth structure is gone. A good mock therefore interleaves project planning, soils, materials, hydraulics, hydrology, water quality, drinking water, wastewater, groundwater, and sitework rather than clustering one topic.
Domain-Balanced Question Mix
Use this 80-question allocation. It stays inside the April 2024 NCEES question-count ranges while weighting the highest-volume WRE areas.
- Domain NCEES Range Mock Qs Main Skill Tested
- Project planning 4-6 5 Present worth, cost, schedule, sustainability
- Soil mechanics 3-5 4 Bearing, settlement, lateral earth pressure, slope stability
- Engineering materials 4-6 5 Soil classification, concrete, pipe materials, lab tests
- Analysis and design 6-9 7 Mass balance, hydraulic/solids loading, flow measurement
- Closed conduit hydraulics 7-11 8 Energy, headloss, pumps, pipe networks
- Open channel hydraulics 7-11 8 Manning flow, culverts, critical depth, storm drainage
- Hydrology 8-12 10 IDF, time of concentration, NRCS runoff, routing
- Groundwater and wells 4-6 4 Aquifers, drawdown, seepage, well hydraulics
- Surface/groundwater quality 5-8 5 Dissolved oxygen, TMDL, contaminant transport
- Drinking water distribution/treatment 6-9 6 Demand, storage, coagulation, disinfection
- Wastewater collection/treatment 7-11 8 Collection, activated sludge, solids, nutrient removal
- Project sitework 9-14 9 Earthwork, erosion control, excavation safety, curves, walls
The ranges total 80 at their midpoints, so this plan is defensible. Common trap: candidates over-build hydraulics and hydrology and starve sitework, yet sitework carries the single largest range (9-14).
Two-Pass Timing Inside Each Session
Treat 6 minutes per question as the long-run average, not a target for each item. One-step unit or concept questions should take 2-4 minutes; a pump operating-point, detention-basin routing, or activated-sludge solids problem may justify 8-12 minutes once the setup is clean. The error is spending 12 minutes before confirming the setup is clean.
Run each ~40-question session with a two-pass workflow:
Read the final sentence first and circle the requested unit (cfs, MGD, lb/day, ft of head, mg/L).
Solve obvious and medium questions immediately on pass one.
Flag items with long data tables, multiple conversions, or uncertain assumptions.
Never leave a question blank before submitting a session — there is no return; choose the best-supported option.
After the break, reset scratch paper and start session 2 with identical discipline.
For practice, give yourself about 4 hours 15 minutes per 40-question session (8.5 hours / 2), take the full 50-minute break between them, and submit each block irrevocably. This is stricter than casual studying and reveals whether fatigue causes unit drift or skipped assumptions.
Scoring and Review Target
A raw percentage is useful only if tied to diagnosis. After the mock, build a table with columns for question number, domain, correct or incorrect, miss type, time spent, reference used, and corrective action. Separate wrong answers from slow correct answers — an 11-minute correct hydrograph problem is a scoring risk because it borrows time from later items that you never reach inside the locked session.
Readiness is not one magic number. NCEES does not publish a fixed passing percentage; the cut score is established by modified-Angoff standard setting for each new question pool and is reported to candidates only as pass or fail, never as a raw or scaled score. A practical final-week proxy is consistent performance near 70 percent or better on mixed, timed practice, with no single domain below roughly 50 percent and no repeating unit-error pattern.
Triage a weak low-volume domain such as groundwater and wells; repair a weak high-volume domain such as hydrology, hydraulics, wastewater, or sitework immediately, because those carry the points.
Two Common Full-Length Mock Failures
Beyond the score, watch for two structural failures that a casual practice session hides. First, session imbalance : candidates who do not enforce the two-session lock often pour 5 hours into the first 40 questions and then sprint the second 40 in 3.5 hours, exactly inverting the real constraint. Practice splitting your time so each ~40-question session gets close to 4 hours 15 minutes, and submit the first session before opening the second.
Second, reference dependency drift : in a relaxed setting candidates look up formulas they actually know cold, which feels harmless but adds 60 to 90 seconds per question and compounds into a full hour across 80 items. Your mock should record every handbook search so you can see whether your search rate is sustainable. If you are searching more than roughly one in three questions, your handbook habit — not your engineering knowledge — is your bottleneck, and that is a fast, high-yield repair in the final week.