Study guide

16.3 Design Standard Navigation and Revision Years

NCEES PE Civil: Water Resources and Environmental Exam Exam

Track your progress as you read

Finished sections get a check mark.

1 Chapter 1: NCEES WRE Exam Spec and Reference Strategy

1.1 NCEES WRE Format 1.2 Reference Handbook and Units 1.3 Blueprint Prioritization

2 Chapter 6: WRE Project Planning, Cost, and Engineering Economics

6.1 Quantity Takeoff and Unit Basis 6.2 Cost Estimating and Bid Item Logic 6.3 Schedules, Sequencing, and Critical Path 6.4 Present Worth, Life-Cycle Cost, and Sustainability

3 Chapter 7: Soil Mechanics for WRE Problems

7.1 Lateral Earth Pressure and Retaining Situations 7.2 Consolidation, Compaction, and Settlement 7.3 Bearing Capacity and Slope Stability 7.4 Soil Data, Boring Logs, and Unit Conversions

4 Chapter 8: WRE Analysis and Hydraulic Design Foundations

8.1 Mass Balance and Hydraulic Loading 8.2 Solids Loading and Sludge Mass Balance 8.3 Hydraulic Flow Measurement and Instrumentation 8.4 Design Checks, Safety Factors, and Reasonableness

5 Chapter 9: WRE Hydrology, Runoff, and Storage Routing

9.1 Design Storms, IDF, and Time of Concentration 9.2 Rational Method and Peak Flow Limits 9.3 NRCS Curve Number and Unit Hydrographs 9.4 Detention, Retention, and Routing Checks

6 Chapter 10: Closed Conduit and Open Channel Hydraulics

10.1 Continuity, Energy, and HGL/EGL 10.2 Pipe Flow Losses, Pumps, and Net Head 10.3 Manning, Open Channel, and Critical Flow 10.4 Culverts, Weirs, Orifices, and Control Sections

7 Chapter 11: Groundwater, Wells, and Aquifer Flow

11.1 Darcy Law, Gradient, and Flow Area 11.2 Confined and Unconfined Aquifers and Storage 11.3 Well Drawdown, Specific Capacity, and Interference 11.4 Contaminant Transport and Dewatering Decisions

8 Chapter 12: Water Quality Chemistry and Pollutant Loading

12.1 Concentration, Load, and Mass-Rate Conversions 12.2 BOD, CBOD, DO, and Oxygen Demand 12.3 Nutrients, pH, Alkalinity, and Buffering 12.4 Pollutant Allocation, TMDL, and Water Quality Criteria

9 Chapter 13: Water Treatment Processes and Design Checks

13.1 Coagulation, Flocculation, and Sedimentation 13.2 Filtration, Disinfection, and CT Logic 13.3 Softening, Iron, Manganese, and Chemical Feed 13.4 Treatment Plant Hydraulics and Operations

10 Chapter 14: Wastewater Collection, Treatment, and Sludge

14.1 Collection-System Hydraulics and Infiltration 14.2 Preliminary, Primary, and Secondary Treatment 14.3 Nutrient Removal and Effluent Quality 14.4 Sludge Processing, Digestion, and Dewatering

11 Chapter 3: Water Quality, Treatment, and Sitework

Water Quality and Regulation Drinking Water and Wastewater Treatment Project Sitework and Final Review

12 Chapter 15: Sitework, Drainage, and Erosion Control

15.1 Grading, Cut/Fill, and Earthwork Balancing 15.2 Storm Drain Inlets and Minor Systems 15.3 Erosion, Sediment Control, and BMPs 15.4 Permitting, Constructability, and Field Adjustments

13 Chapter 4: Materials, Analysis, and Design for WRE

4.1 Materials and Pipe Selection 4.2 Analysis and Design Workflow 4.3 Site-Civil Constructability

14 Chapter 16: Materials, Pipes, Standards, and Reference Navigation

16.1 Pipe Material Selection and Failure Modes 16.2 Concrete, Soil, and Geosynthetic Materials 16.3 Design Standard Navigation and Revision Years 16.4 Reference Search Drills and Unit Checks

15 Chapter 18: Pumps, Distribution, and Collection Systems

18.1 Pump Curves, System Curves, and Operating Point 18.2 Water Distribution Pressure, Demand, and Storage 18.3 Sewer Collection, Lift Stations, and Force Mains 18.4 Transient, Surge, and Operational Troubleshooting

16 Chapter 19: WRE Calculation Workbook and Unit Drills

19.1 Flow, Concentration, and Load Workbook 19.2 Hydraulics Energy and Head Workbook 19.3 Treatment and Process Sizing Workbook 19.4 Error Patterns and Repair Drills

17 Chapter 5: Mixed Practice, Units, and Final Review

Formula Selection and Units Mixed WRE Mock Review Exam Day and Spec Transition

18 Chapter 17: Full-Length WRE Mixed Practice and Final Review

17.1 Eighty-Question Mock Exam Plan 17.2 Miss-Log Diagnostics by Domain 17.3 Calculator, Reference, and Break Strategy 17.4 Final-Week Current vs 2027 Spec Check

16.3 Design Standard Navigation and Revision Years

Key Takeaways Explain This Topic AI

For the current PE Civil WRE exam effective before April 2027, NCEES identifies the April 2024 WRE specification and its listed design standards as the controlling exam references.

The current WRE standard list supplies the Recommended Standards for Wastewater Facilities (Ten States Standards), 2014, and Recommended Standards for Water Works, 2018, as searchable electronic PDFs.

NCEES scores solutions that reference a standard of practice using the listed standard and revision year, so newer or older editions can produce wrong exam answers.

Only one standards chapter may be opened and searched at a time in the exam interface, making chapter targeting and exact keyword choice part of the tested skill.

Use the future April 2027 civil specification only when your exam date is on or after its effective date; do not blend future standard lists into current April 2024 WRE practice.

Last updated: June 2026

Standards Are Part of the Exam, Not Background Reading

NCEES describes the PE Civil exam as closed-book with searchable electronic references. For the current WRE specification effective beginning April 2024 (and effective before April 2027), the exam supplies the PE Civil Reference Handbook plus the design standards listed on the WRE specification. That list is short but decisive: the Recommended Standards for Wastewater Facilities, 2014 and the Recommended Standards for Water Works, 2018 , both published by the Great Lakes-Upper Mississippi River Board (GLUMRB) and commonly called the Ten States Standards .

NCEES also states that solutions to questions referencing a standard of practice are scored based on the listed standard and revision year. That sentence is worth points. If you learned a later edition, a local utility manual, or a state amendment, it may reflect good real-world practice yet still be wrong for the current NCEES item.

Current WRE Standard Map

Reference on current WRE spec Revision year Use it when the problem is about

Recommended Standards for Wastewater Facilities (Ten States, Wastewater) 2014 Collection systems, pumping, treatment units, sludge handling, disinfection, layout, reliability/redundancy criteria

Recommended Standards for Water Works (Ten States, Water Works) 2018 Source development, treatment, pumping, storage, distribution, disinfection, chemical feed, waterworks design criteria

PE Civil Reference Handbook Current NCEES edition (supplied) Equations, unit conversions, hydraulics, hydrology, water quality, soils and materials basics, general civil formulas

The standard is not where you search for every formula. Use the handbook first for Bernoulli, Manning, Hazen-Williams, Darcy-Weisbach, continuity, detention time, mass loading, soil phase relationships, and unit conversions. Use the Ten States standards when the prompt asks what a design criterion, minimum, layout requirement, redundancy expectation, or treatment-facility provision should be under the listed standard.

Reference and Calculation Workflow

The exam software provides searchable PDF references with linked chapters, but only one chapter at a time can be opened and searched. A broad search wastes time if you are in the wrong document or chapter.

Decide whether the question is water, wastewater, or general handbook. A storage tank, disinfectant residual, filter loading rate, or water-main detail points to Water Works 2018. A lift station, sanitary sewer, aeration basin, clarifier, digester, sludge, or effluent disinfection detail points to Wastewater Facilities 2014.

Choose the most likely chapter from the table of contents before searching, so the search starts near the topic.

Search for the noun the standard uses, not only the noun the question uses. Try pump station and pumping station; storage and reservoir; sewer and collection; chlorine and disinfection.

Read definitions and footnotes before using a table value. Many criteria depend on design flow, population served, facility class, redundancy, or whether the unit is preliminary, primary, secondary, or disinfection.

Confirm revision year and units. If the criterion is a rate, detention time, dimension, or loading value, convert it to the requested answer units before selecting an option.

Avoiding the 2024-2027 Mix-Up

The NCEES civil page now shows current materials (effective before April 2027) alongside future materials (effective beginning April 2027). That layout tempts candidates to download the wrong file. For an exam taken before April 2027, study from the April 2024 WRE specification and the revision years on that file. For an exam on or after the April 2027 effective date, switch to the future file. Do not blend them during practice, because the answer key follows the reference set for your exam window.

A disciplined reference habit converts directly into score: pick the correct reference, then the correct chapter, then the correct table or paragraph, then the unit conversion. The candidate who knows where to look usually beats the one who memorized scattered design trivia. Practice this on every standards item until document choice is automatic — under timed conditions you have only a few minutes per question, and a misdirected search is the most common time sink on the depth exam.

Criteria You Should Recognize on Sight

You do not have to memorize the Ten States tables, but recognizing the kind of criterion each standard contains tells you instantly which document to open. The Wastewater Facilities standard supplies design values such as peak-to-average flow factors, minimum sewer slopes and velocities (about 2 ft/s minimum scour velocity), clarifier surface overflow rates, aeration detention times, and redundancy/reliability classes for treatment trains.

The Water Works standard supplies values such as filter loading rates, clearwell and contact-time provisions, finished-water storage, minimum distribution pressures (commonly 20 psi minimum during fire flow, 35 psi normal), and chemical-feed redundancy.

  • If the question mentions... Open this standard Likely criterion sought
  • Sanitary sewer slope or velocity Wastewater Facilities 2014 Minimum self-cleansing velocity / slope
  • Lift-station pumps and reliability Wastewater Facilities 2014 Firm capacity, standby/redundant pump
  • Clarifier or aeration basin sizing Wastewater Facilities 2014 Overflow rate, detention time
  • Distribution system pressure Water Works 2018 Minimum normal and fire-flow pressure
  • Finished-water storage volume Water Works 2018 Storage and equalization provisions
  • Filter loading rate Water Works 2018 Rapid-rate filter loading criterion
  • Why Revision Year Changes Answers

Design criteria drift between editions. A redundancy requirement, a loading rate, or a minimum pressure can be revised, and NCEES keys the answer to the year on the spec. The 2018 Water Works edition, for instance, reflects updates the 2012 edition did not contain. If you study from a printed copy that happens to be an older or newer edition than the listed revision, you risk selecting a numerically 'correct in real life' answer that is wrong for the exam window.

Always confirm the cover-page revision year of the on-screen PDF before trusting a table value, and never substitute a state-specific amendment for the GLUMRB national criterion the exam keys to.