Study guide

18.3 Sewer Collection, Lift Stations, and Force Mains

NCEES PE Civil: Water Resources and Environmental Exam Exam

Track your progress as you read

Finished sections get a check mark.

1 Chapter 1: NCEES WRE Exam Spec and Reference Strategy

1.1 NCEES WRE Format 1.2 Reference Handbook and Units 1.3 Blueprint Prioritization

2 Chapter 6: WRE Project Planning, Cost, and Engineering Economics

6.1 Quantity Takeoff and Unit Basis 6.2 Cost Estimating and Bid Item Logic 6.3 Schedules, Sequencing, and Critical Path 6.4 Present Worth, Life-Cycle Cost, and Sustainability

3 Chapter 7: Soil Mechanics for WRE Problems

7.1 Lateral Earth Pressure and Retaining Situations 7.2 Consolidation, Compaction, and Settlement 7.3 Bearing Capacity and Slope Stability 7.4 Soil Data, Boring Logs, and Unit Conversions

4 Chapter 8: WRE Analysis and Hydraulic Design Foundations

8.1 Mass Balance and Hydraulic Loading 8.2 Solids Loading and Sludge Mass Balance 8.3 Hydraulic Flow Measurement and Instrumentation 8.4 Design Checks, Safety Factors, and Reasonableness

5 Chapter 9: WRE Hydrology, Runoff, and Storage Routing

9.1 Design Storms, IDF, and Time of Concentration 9.2 Rational Method and Peak Flow Limits 9.3 NRCS Curve Number and Unit Hydrographs 9.4 Detention, Retention, and Routing Checks

6 Chapter 10: Closed Conduit and Open Channel Hydraulics

10.1 Continuity, Energy, and HGL/EGL 10.2 Pipe Flow Losses, Pumps, and Net Head 10.3 Manning, Open Channel, and Critical Flow 10.4 Culverts, Weirs, Orifices, and Control Sections

7 Chapter 11: Groundwater, Wells, and Aquifer Flow

11.1 Darcy Law, Gradient, and Flow Area 11.2 Confined and Unconfined Aquifers and Storage 11.3 Well Drawdown, Specific Capacity, and Interference 11.4 Contaminant Transport and Dewatering Decisions

8 Chapter 12: Water Quality Chemistry and Pollutant Loading

12.1 Concentration, Load, and Mass-Rate Conversions 12.2 BOD, CBOD, DO, and Oxygen Demand 12.3 Nutrients, pH, Alkalinity, and Buffering 12.4 Pollutant Allocation, TMDL, and Water Quality Criteria

9 Chapter 13: Water Treatment Processes and Design Checks

13.1 Coagulation, Flocculation, and Sedimentation 13.2 Filtration, Disinfection, and CT Logic 13.3 Softening, Iron, Manganese, and Chemical Feed 13.4 Treatment Plant Hydraulics and Operations

10 Chapter 14: Wastewater Collection, Treatment, and Sludge

14.1 Collection-System Hydraulics and Infiltration 14.2 Preliminary, Primary, and Secondary Treatment 14.3 Nutrient Removal and Effluent Quality 14.4 Sludge Processing, Digestion, and Dewatering

11 Chapter 3: Water Quality, Treatment, and Sitework

Water Quality and Regulation Drinking Water and Wastewater Treatment Project Sitework and Final Review

12 Chapter 15: Sitework, Drainage, and Erosion Control

15.1 Grading, Cut/Fill, and Earthwork Balancing 15.2 Storm Drain Inlets and Minor Systems 15.3 Erosion, Sediment Control, and BMPs 15.4 Permitting, Constructability, and Field Adjustments

13 Chapter 4: Materials, Analysis, and Design for WRE

4.1 Materials and Pipe Selection 4.2 Analysis and Design Workflow 4.3 Site-Civil Constructability

14 Chapter 16: Materials, Pipes, Standards, and Reference Navigation

16.1 Pipe Material Selection and Failure Modes 16.2 Concrete, Soil, and Geosynthetic Materials 16.3 Design Standard Navigation and Revision Years 16.4 Reference Search Drills and Unit Checks

15 Chapter 18: Pumps, Distribution, and Collection Systems

18.1 Pump Curves, System Curves, and Operating Point 18.2 Water Distribution Pressure, Demand, and Storage 18.3 Sewer Collection, Lift Stations, and Force Mains 18.4 Transient, Surge, and Operational Troubleshooting

16 Chapter 19: WRE Calculation Workbook and Unit Drills

19.1 Flow, Concentration, and Load Workbook 19.2 Hydraulics Energy and Head Workbook 19.3 Treatment and Process Sizing Workbook 19.4 Error Patterns and Repair Drills

17 Chapter 5: Mixed Practice, Units, and Final Review

Formula Selection and Units Mixed WRE Mock Review Exam Day and Spec Transition

18 Chapter 17: Full-Length WRE Mixed Practice and Final Review

17.1 Eighty-Question Mock Exam Plan 17.2 Miss-Log Diagnostics by Domain 17.3 Calculator, Reference, and Break Strategy 17.4 Final-Week Current vs 2027 Spec Check

18.3 Sewer Collection, Lift Stations, and Force Mains

Key Takeaways Explain This Topic AI

Collection-system flow is sanitary base flow plus infiltration and inflow; wet-weather response often controls lift-station and overflow questions.

Gravity sewer checks usually require Manning capacity, slope, depth ratio, and velocity reasonableness rather than diameter alone.

Lift-station firm capacity is the capacity with the largest pump out of service, not the sum of all installed pumps.

Wet-well active volume controls pump cycling and must balance inflow, pump rate, starts per hour, and detention time.

Force mains are pressure conduits, so headloss, air release, surge, corrosion, and minimum velocity all matter.

Last updated: June 2026

Collection Systems from Pipe to Pump Station

The April 2024 WRE specification covers wastewater collection systems, including lift stations, sewer networks, infiltration, inflow, smoke testing, maintenance, and odor control. That scope is broader than the Manning equation. A gravity sewer, wet well, pump, and force main behave as one system during wet weather, power loss, and maintenance.

Sanitary flow is wastewater from homes, businesses, and industry. Infiltration is groundwater entering through defects such as cracked pipe, bad joints, and leaking manholes; it persists for hours or days after rain and rises with the seasonal water table. Inflow is stormwater entering quickly through roof drains, yard drains, cross connections, missing cleanout caps, or leaky manhole covers; it spikes during the storm and recedes fast. PE questions frequently ask which investigation or repair matches the hydrograph response, so memorize the two timing signatures.

Collection-System Elements

  • Element Main check Failure signal
  • Gravity sewer Manning capacity, slope, depth, velocity Surcharging, deposits, overflows
  • Manhole Access, drop, leakage, corrosion I/I, odor, hydrogen-sulfide damage
  • Lift station Firm capacity, wet-well volume, controls Excess cycling, high-level alarms
  • Force main Headloss, pressure class, air, surge High pump head, air binding, breaks
  • Maintenance Cleaning, CCTV, smoke testing, root control Repeated blockages, wet-weather spikes

Design flow typically equals peak sanitary flow plus infiltration plus inflow. If sanitary base is 0.90 MGD, a peaking factor of 2.5 gives 2.25 MGD peak sanitary, and adding 0.35 MGD I/I yields 2.60 MGD that the conveyance must handle.

Gravity Sewer and Lift-Station Workflow

Use Manning's equation , V = (1.49/n) R^(2/3) S^(1/2) in U.S. units, for gravity sewers. Full-pipe capacity is quick to check when the pipe flows full but unpressurized; partly full flow needs the hydraulic radius and area at the actual depth ratio (d/D). Many standards seek a minimum velocity at typical flow (often near 2 ft/s) to limit solids deposition, but exact criteria are jurisdiction-specific. On the exam, use the velocity or slope criterion given, and remember that an oversized pipe can drop velocity below the scour value at low flow.

Lift-station steps:

Build design inflow: base sanitary flow plus infiltration, inflow, peaking, and industrial contribution.

Check firm capacity with the largest pump out of service when reliability is asked.

Use the pump-and-force-main system curve to confirm the actual operating flow, not nameplate.

Size or check wet-well active volume for cycling: drawdown and fill time both count.

Check high-water storage, emergency power, bypass pumping, alarms, and odor or corrosion if operational.

For one pump cycling between lead-on and lead-off levels, drawdown time = V / (Qpump - Qin), fill time = V / Qin, and cycle time = drawdown + fill. The minimum cycle time for a maximum starts-per-hour limit Z is T = 60/Z minutes. The active volume that worst-cases the cycle occurs when Qin = Qpump/2; designers often size to that point. If inflow approaches pump capacity, drawdown stretches and reserve shrinks; if active volume is too small, starts per hour climb and motors overheat; if it is too large, detention rises and septicity and odor follow.

Force Mains, Air, and Troubleshooting

A force main is a pressure pipe whose headloss is part of the pump system curve. Its high points trap air; air pockets cut effective area, raise headloss, and destabilize pumping. Air-release valves and air-vacuum valves may be required at high points depending on profile and transient risk. A minimum velocity (frequently cited near 2 ft/s for raw wastewater) keeps solids in suspension, while excessive velocity drives up headloss and surge. Ductile iron, PVC, and HDPE all carry force mains, but the crown is also the prime spot for hydrogen-sulfide-driven crown corrosion in any partially full or turbulent section.

Match symptoms to causes rather than swapping parts:

  • Symptom Likely cause Targeted action
  • Wet-weather flow spike Inflow sources Smoke testing, manhole cover repair
  • Slow recession after rain Infiltration CCTV, joint and manhole sealing
  • High discharge pressure, low flow Closed valve, blockage, air binding Verify valve, inspect force main
  • Frequent starts, dry weather Wet well too small or controls off Resize active volume, reset floats
  • Odor and concrete spalling Sulfide generation, low velocity Ventilation, chemical dosing, cleaning

A gravity-sewer overflow during dry weather points to a blockage or pump failure, not I/I. A surcharge only during storms points to I/I and the conveyance peaking factor. On the PE exam, the best operational answer addresses the cause without violating hydraulic capacity: you never solve an I/I problem by enlarging a pump if the receiving treatment plant cannot take the wet-weather load, and you never claim a smoke test will fix steady seasonal infiltration. Smoke testing finds rapid inflow paths (roof leaders, cross connections, uncapped cleanouts); CCTV and dyed-water testing find slow infiltration through cracks and joints.

Matching the diagnostic tool to the hydrograph timing is itself a common exam distinction, so keep the inflow-versus-infiltration signatures separate when you choose a remedy.