Study guide

7.2 Pulleys, Wheels and Axles, and Inclined Planes

Philippines Computer-Based National Career Assessment Examination CB-NCAE

Track your progress as you read

Finished sections get a check mark.

1 Chapter 1: Overview, Architecture, and Testing Policies

1.1 CB-NCAE Overview, Governance, and Purpose 1.2 Computer-Based Platform, Delivery, and Accommodations 1.3 Senior High School Track Integration and Career Guidance

2 Chapter 2: GSA — Verbal Reasoning (English & Filipino)

2.1 Reading Comprehension and Passage Analysis 2.2 Vocabulary in Context, Context Clues, and Idiomatic Usage 2.3 Verbal Analogies and Word Relationships 2.4 Critical Evaluation, Tone, and Argument Synthesis

3 Chapter 3: GSA — Numerical Reasoning

3.1 Arithmetic Operations, Fractions, Decimals, and Percentages 3.2 Ratios, Proportions, and Rates 3.3 Basic Algebra, Sequences, and Patterns 3.4 Geometry, Measurement, and Data Interpretation

4 Chapter 4: GSA — Logical Reasoning

4.1 Categorical Syllogisms and Deductive Reasoning 4.2 Conditional Logic, Truth Tables, and Contrapositives 4.3 Logical Fallacies and Argument Flaws 4.4 Analytical Puzzles, Linear Ordering, and Grouping

5 Chapter 5: GSA — Abstract Reasoning

5.1 Linear Figure Series and Sequential Progression 5.2 Matrix Completion and Multi-Variable Grids 5.3 Figure Classification and Odd-One-Out 5.4 Rule Induction, Pattern Analogy, and Complex Transformations

6 Chapter 6: GSA — Spatial Reasoning

6.1 2D to 3D Mental Folding and Surface Nets 6.2 Orthographic Projection and Multiview Visualization 6.3 3D Spatial Rotation and Block Visualization 6.4 Mirror Images, Reflections, and Spatial Symmetry

7 Chapter 7: GSA — Mechanical Reasoning

7.1 Simple Machines: Levers, Moments, and Mechanical Advantage 7.2 Pulleys, Wheels and Axles, and Inclined Planes 7.3 Gears, Belt Drives, and Rotational Mechanics 7.4 Fluid Mechanics, Pressure, and Basic Electrical Circuits

8 Chapter 8: GSA — Perceptual Accuracy and Response Efficiency (PARE)

8.1 Alphanumeric Code and String Matching 8.2 Clerical Filing, Indexing, and Alphabetical Sorting 8.3 Symbol Counting, Visual Inspection, and Transposition Detection

9 Chapter 9: CORE — Career and Occupational Roles Explorer & Track Guidance

9.1 CORE-A: Holland's RIASEC Typology 9.2 CORE-B: Thurstone Model of Occupational Interests 9.3 Profile Synthesis and Senior High School Track Selection

7.2 Pulleys, Wheels and Axles, and Inclined Planes

Key Takeaways Explain This Topic AI

A single fixed pulley provides an IMA = 1 \text{IMA} = 1 IMA = 1 (acting solely as a direction changer), whereas a single movable pulley provides an IMA = 2 \text{IMA} = 2 IMA = 2 (halving the required effort while doubling rope pull distance).

In block and tackle systems, the Ideal Mechanical Advantage equals the exact number of rope strands directly supporting the load and movable pulley block.

Downward effort strands running off a fixed pulley do not support the load and are excluded from strand counts, whereas upward effort strands pulling directly from a movable pulley are included.

An inclined plane trades distance for force with an IMA = L / h = 1 / sin ⁡ θ \text{IMA} = L / h = 1 / \sin \theta IMA = L / h = 1/ sin θ , while wedges and screws function as mobile and helical variations of the inclined plane.

A wheel and axle operates as a continuous rotating lever with an Ideal Mechanical Advantage equal to the ratio of the wheel radius to the axle radius ( IMA = R wheel / r axle \text{IMA} = R_{\text{wheel}} / r_{\text{axle}} IMA = R wheel ​ / r axle ​ ).

Last updated: October 2026

7.2 Pulleys, Wheels and Axles, and Inclined Planes

Pulleys, inclined planes, and wheel-and-axle systems represent primary engineering solutions for lifting heavy loads vertically against gravity. In each mechanism, the mechanical advantage is achieved by trading displacement distance for effort force. Mastering these simple machines requires understanding the geometry of force vectors and the distribution of mechanical tension.

Pulleys: Fixed, Movable, and Block & Tackle Systems

A pulley is a grooved wheel (sheave) that turns around an axle mounted inside a housing or frame (block), designed to support and guide a flexible cord, cable, or rope.

1. Single Fixed Pulley

A fixed pulley has its axle firmly anchored to an immovable overhead structure (e.g., a ceiling beam or crane mast).

Mechanical Behavior : When pulling the rope downward, the load rises upward by the identical distance ( d e = d L d_e = d_L d e ​ = d L ​ ).

Mechanical Advantage : IMA = 1.0 \text{IMA} = 1.0 IMA = 1.0 .

Function : It does not multiply force . Its sole advantage is changing the direction of the applied force , allowing an operator to pull downward—working with gravity and utilizing their own body weight—rather than lifting upward against gravity.

2. Single Movable Pulley

A movable pulley is attached directly to the load itself, moving upward and downward along with the load.

Mechanical Behavior : The rope is anchored overhead at one end, loops under the movable pulley, and the free end is pulled upward by the operator.

Tension Distribution : The total downward weight of the load ( F L F_L F L ​ ) is shared equally between the two upward-supporting rope segments on either side of the pulley:

T = F L 2 ⟹ F e = F L 2 T = \frac{F_L}{2} \implies F_e = \frac{F_L}{2} T = 2 F L ​ ​ ⟹ F e ​ = 2 F L ​ ​

Displacement : To lift the load by a vertical height of h h h , both supporting rope strands must shorten by h h h . Consequently, the operator must pull 2 h 2h 2 h of rope ( d e = 2 d L d_e = 2 d_L d e ​ = 2 d L ​ ).

Mechanical Advantage : IMA = 2.0 \text{IMA} = 2.0 IMA = 2.0 .

Function : It cuts the required lifting force in half, at the expense of doubling the length of rope that must be hauled. Single Fixed vs. Single Movable Pulley:

  • FIXED PULLEY (IMA = 1) MOVABLE PULLEY (IMA = 2)
  • [ Ceiling Anchor ] [ Ceiling Anchor ]
  • | |
  • ( O ) <--- Fixed Axle | ^ Effort (Fe = W/2)
  • / \ | |
  • / v Effort (Fe = W) \ /
  • | \ /
  • [Load] (Weight W) ( O ) <--- Movable Axle
  • |
  • [Load] (Weight W)
  • 3. Block and Tackle Systems and the Strand-Counting Rule

A block and tackle combines multiple fixed and movable pulleys into two blocks to achieve high mechanical advantage.

To determine the Ideal Mechanical Advantage of any block and tackle system on an exam, use the Strand-Counting Rule :

Identify the movable pulley block (the block that moves with the load).

Count only the rope strands that directly emerge from and support the movable block .

The Direction Rule : Inspect the free end of the rope where the effort is applied:

If the effort rope pulls downward (running off an overhead fixed pulley), it does NOT support the movable block. Do not count it .

If the effort rope pulls upward (running directly off a movable pulley), it DOES help support the load. Count it .

IMA = n ( where n is the number of supporting rope strands ) \text{IMA} = n \quad (\text{where } n \text{ is the number of supporting rope strands}) IMA = n ( where n is the number of supporting rope strands )

Ideal Effort F e = F load n , d e = n × d L \text{Ideal Effort } F_e = \frac{F_{\text{load}}}{n}, \qquad d_e = n \times d_L Ideal Effort F e ​ = n F load ​ ​ , d e ​ = n × d L ​

  • Arrangement Strands holding the moving block IMA Ideal effort for a 600 N load
  • One fixed pulley None (there is no moving block) 1 600 N
  • One movable pulley, rope anchored overhead, free end pulled upward 2 2 300 N

Two-sheave fixed block and two-sheave moving block, rope anchored to the fixed block, free end leaving the fixed block downward 4 4 150 N

The same blocks, rope anchored to the moving block, free end leaving the moving block upward 5 5 120 N

In the four-strand case, the downward pull on the free end comes off a fixed pulley, so it does not hold up the moving block. In the five-strand case, the free end pulls upward directly on the moving block, so it counts.

Important

Always verify the direction of the final effort strand. In a standard block and tackle where the rope passes once over each pulley: if the rope exits from the top block downward, IMA = number of pulleys in system \text{IMA} = \text{number of pulleys in system} IMA = number of pulleys in system . If the rope exits from the bottom block upward, IMA = number of pulleys + 1 \text{IMA} = \text{number of pulleys} + 1 IMA = number of pulleys + 1 .

Inclined Planes (Ramps)

An inclined plane is a flat, stationary supporting surface tilted at an angle θ \theta θ to the horizontal. It enables a heavy load to be raised to an elevation h h h by pushing or pulling it along the sloping ramp length L L L .

Force Vector Resolution

Gravity pulls an object of mass m m m straight down with weight W = m g W = mg W = m g . On an incline, this gravitational vector is resolved into two perpendicular components:

Parallel Component ( F ∥ F_\parallel F ∥ ​ ) : Pulls the object down along the ramp surface: F ∥ = W sin ⁡ θ = m g ( h L ) F_\parallel = W \sin \theta = mg \left(\frac{h}{L}\right) F ∥ ​ = W sin θ = m g ( L h ​ )

Perpendicular Normal Component ( F ⊥ F_\perp F ⊥ ​ ) : Presses the object firmly into the ramp surface: F ⊥ = W cos ⁡ θ F_\perp = W \cos \theta F ⊥ ​ = W cos θ Inclined Plane Force Vectors:

  • /|
  • / |
  • / |
  • L / | h (Height)
  • / |
  • / |
  • /___θ__|
  • Base (b)

Gravity (W = mg) splits into:

  • Down the ramp: F_parallel = mg * sin(θ) = mg * (h / L)
  • Into the ramp: F_normal = mg * cos(θ)
  • Mechanical Advantage of a Ramp

In an ideal frictionless scenario, the effort force F e F_e F e ​ needed to push the load up the ramp at constant speed must balance F ∥ F_\parallel F ∥ ​ :

F e = W ( h L ) ⟹ IMA = F load F effort = L h = 1 sin ⁡ θ F_e = W \left(\frac{h}{L}\right) \implies \text{IMA} = \frac{F_{\text{load}}}{F_{\text{effort}}} = \frac{L}{h} = \frac{1}{\sin \theta} F e ​ = W ( L h ​ ) ⟹ IMA = F effort ​ F load ​ ​ = h L ​ = s i n θ 1 ​

A ramp 10 m 10\text{ m} 10 m long that rises 2 m 2\text{ m} 2 m vertically has an IMA = 10 / 2 = 5.0 \text{IMA} = 10 / 2 = 5.0 IMA = 10/2 = 5.0 . An operator needs only 200 N 200\text{ N} 200 N of ideal effort to lift a 1 , 000 N 1,000\text{ N} 1 , 000 N load.

If friction is present with coefficient μ \mu μ , the actual effort required must overcome both gravity and friction: F e , actual = W sin ⁡ θ + f friction = W sin ⁡ θ + μ W cos ⁡ θ F_{e,\text{actual}} = W \sin \theta + f_{\text{friction}} = W \sin \theta + \mu W \cos \theta F e , actual ​ = W sin θ + f friction ​ = W sin θ + μ W cos θ

Wedges and Screws: Mobile and Helical Inclined Planes

Both the wedge and the screw are direct mechanical adaptations of the inclined plane.

1. The Wedge

While an inclined plane remains stationary while the load moves up its slope, a wedge is a mobile double inclined plane that is driven into or under a load to separate, split, or lift it.

IMA wedge = Length of Wedge ( L ) Thickness / Width of Wedge ( t ) \text{IMA}_{\text{wedge}} = \frac{\text{Length of Wedge } (L)}{\text{Thickness / Width of Wedge } (t)} IMA wedge ​ = Thickness / Width of Wedge ( t ) Length of Wedge ( L ) ​

A long, thin wedge has a high mechanical advantage and penetrates easily, but must be driven deep into the material to produce a given separation.

A short, blunt wedge has a low mechanical advantage, requiring a massive driving force (e.g., from a sledgehammer), but yields rapid lateral expansion.

Common examples include axes, chisels, knife blades, nails, doorstops, and plowshares.

2. The Screw

A screw is an inclined plane wrapped helically around a central cylinder. The spiral ridge formed by the incline is the thread .

Pitch ( p p p ) : The linear distance between two consecutive thread crests, representing the axial distance the screw advances into a material in exactly one full 360 ∘ 360^\circ 36 0 ∘ rotation.

Mechanical Advantage : When a screw is rotated by an effort applied at the tip of a handle or lever of radius r r r (such as a screwdriver handle or screw jack lever), the effort moves through the circumference of a circle ( 2 π r 2\pi r 2 π r ) while the load advances by one pitch ( p p p ):

IMA screw = 2 π r p \text{IMA}_{\text{screw}} = \frac{2\pi r}{p} IMA screw ​ = p 2 π r ​

Because the circumference 2 π r 2\pi r 2 π r is enormously larger than the tiny thread pitch p p p (often 1 to 5 mm 1\text{ to }5\text{ mm} 1 to 5 mm ), screws generate exceptionally large mechanical advantage (often exceeding 500 500 500 to 2 , 000 2,000 2 , 000 ). Furthermore, the extensive friction between the threads prevents screws from "back-driving" under load, making them inherently self-locking (e.g., car jacks, clamps, vises, threaded bolts).

Wheels and Axles

A wheel and axle consists of two rigidly connected concentric cylinders of different diameters that rotate together about a shared central axis. Wheel and Axle Mechanism:

  • (====== Wheel (Radius R) =====)
  • | |
  • | [= Axle =] |
  • | (Radius r) |
  • +-------+-------+
  • |
  • v Load (Suspended on axle)
  • 1. Applied to the Wheel (Force Multiplier)

When the input effort is applied to the perimeter of the larger cylinder (the wheel) to rotate the smaller cylinder (the axle), the system acts as a continuous rotating Class 1 or Class 2 lever:

IMA = Radius of Wheel ( R wheel ) Radius of Axle ( r axle ) = D wheel d axle \text{IMA} = \frac{\text{Radius of Wheel } (R_{\text{wheel}})}{\text{Radius of Axle } (r_{\text{axle}})} = \frac{D_{\text{wheel}}}{d_{\text{axle}}} IMA = Radius of Axle ( r axle ​ ) Radius of Wheel ( R wheel ​ ) ​ = d axle ​ D wheel ​ ​

Because R wheel > r axle R_{\text{wheel}} > r_{\text{axle}} R wheel ​ > r axle ​ , the IMA \text{IMA} IMA is strictly greater than 1. Effort force is multiplied at the axle. Examples include automobile steering wheels, doorknobs, screwdriver handles driving a narrow blade tip, winches, and windlasses.

2. Applied to the Axle (Speed Multiplier)

When input torque is supplied directly to the axle to turn the wheel (such as an engine driveshaft turning a car wheel, or a bicycle chain turning the rear hub), the IMA \text{IMA} IMA is less than 1. This configuration trades force multiplication for substantial increases in linear speed and distance traveled along the wheel's outer rim.

Summary table: simple machines

  • Simple Machine Ideal Mechanical Advantage (IMA) Key Variables Typical Application
  • Fixed Pulley 1.0 1.0 1.0 Direction only Flagpole, window blinds
  • Movable Pulley 2.0 2.0 2.0 Number of supporting lines ( n = 2 n=2 n = 2 ) Construction hoisting
  • Block & Tackle n n n Total strands supporting movable block Heavy crane rigging, boat sails

Inclined Plane L / h = 1 / sin ⁡ θ L / h = 1 / \sin \theta L / h = 1/ sin θ Ramp length ( L L L ) vs. vertical rise ( h h h ) Wheelchair ramps, freight docks

Wedge L / t L / t L / t Penetration length ( L L L ) vs. thickness ( t t t ) Splitting mauls, chisels, knife edges

Screw Jack 2 π r / p 2\pi r / p 2 π r / p Lever radius ( r r r ) vs. thread pitch ( p p p ) Automotive jacks, workshop vises

Wheel and Axle R wheel / r axle R_{\text{wheel}} / r_{\text{axle}} R wheel ​ / r axle ​ Wheel radius ( R R R ) vs. axle radius ( r r r ) Steering wheels, winches, doorknobs