Study guide
3.1 Longitudinal Lines: Center, Lane, Edge, and Barrier Markings
Philippines LTO Non-Professional Driver's License Examination Study Guide Exam
Track your progress as you read
Finished sections get a check mark.
1 Chapter 1: Licensing System and Driver Responsibilities
1.1 Qualifications, Application Sequence, Examinations, and LTMS 1.2 Driver's License Classifications, DL Codes (A, A1, B, B1, B2) & Conditions 1.3 License Validity, Renewal Education, Demerit Points, and Enforcement
2 Traffic Signs and Signals
2.1 Regulatory Signs: Priority, Prohibitive, Restrictive, and Mandatory Signs 2.2 Warning, Hazard, Guide, Expressway, and Roadwork Signs 2.3 Traffic Lights, Flashing Signals, Lane Control, and Officer Directions
3 Chapter 3: Pavement Markings and Road Delineators
3.1 Longitudinal Lines: Center, Lane, Edge, and Barrier Markings 3.2 Stop Lines, Yield Lines, Crosswalks, and Directional Markings 3.3 Special Markings, Islands, Box Junctions, and Curb Restrictions
4 Rules of the Road and Right-of-Way
4.1 Right-of-Way at Intersections, Crosswalks, Private Roads, and Roundabouts 4.2 Overtaking, Passing Restrictions, and Lane Discipline 4.3 RA 4136 Speed Limits, Posted Limits, and Safe-Speed Management 4.4 Turning, Lane Position, Signals, U-Turns, and Roundabout Exits 4.5 Expressway Entry, Lane Use, Stopping, Breakdowns, and Exits
5 Chapter 5: Parking, Stopping, and Emergency Duties
5.1 Prohibited Parking and Obstruction Rules under RA 4136 5.2 Safe Parking, Unattended Vehicles, Hills, and Rejoining Traffic 5.3 Crash Duties, Scene Safety, First Aid, and CTPL
6 Chapter 6: Special Philippine Land Transportation Laws
6.1 Seat Belts and Child Restraints: RA 8750 and RA 11229 6.2 Anti-Drunk and Drugged Driving: RA 10586 6.3 Anti-Distracted Driving: RA 10913 6.4 Motorcycle Helmets and Child Passengers: RA 10054 and RA 10666 6.5 Clean Air, Vehicle-User Charges, Loads, Speed Limiters, and Other Special Rules
7 Chapter 7: Defensive Driving and Vehicle Maintenance
7.1 Defensive Driving Principles: SIPDE System and Space Cushioning 7.2 Vehicle Controls, Pre-Drive Checks, BLOWBAGETS, and Post-Drive Routine 7.3 Rain, Floods, Night Driving, Tire Failure, and Mountain Roads 7.4 Sharing the Road with Pedestrians, Cyclists, Motorcycles, Trucks, and Public Transport
3.1 Longitudinal Lines: Center, Lane, Edge, and Barrier Markings
Key Takeaways Explain This Topic AI
Broken lines permit crossing only when the maneuver is otherwise lawful and safe.
A single solid center line prohibits overtaking across it but may be crossed for a lawful turn when safe.
Double solid center lines are barrier lines that must not be crossed.
With a solid-and-broken combination, the rule facing the driver controls.
Edge and lane lines organize the roadway but do not replace signs, signals, or safe-gap judgment.
Last updated: September 2026
3.1 Longitudinal Lines: Center, Lane, Edge, and Barrier Markings
Longitudinal markings run in the direction of travel. They separate opposing streams, divide lanes moving in the same direction, and define roadway edges. Read the pattern facing your vehicle and combine it with signs, sight distance, and traffic conditions.
Broken lines
A broken center or lane line indicates that crossing may be permitted, but only for a lawful and safe maneuver. Before changing lanes or overtaking, check mirrors, signal, check the blind spot, verify a sufficient clear gap, and move smoothly. The broken pattern never grants priority over a vehicle already occupying the destination lane.
On a two-way road, a broken center line allows a pass only when RA 4136’s overtaking conditions are satisfied: the left side must be clearly visible and free of oncoming traffic for enough distance to complete the pass safely. Do not rely on a fictional universal “100-metre return rule.” The statute uses adequate visibility and safe distance, and it separately prohibits passing in specified places such as obstructed curves or crests, railway crossings, most intersections, work zones, and official no-passing zones.
Single solid lines
The LTO pavement-marking lesson distinguishes a single solid center line from a double barrier. A single solid yellow or white center line means no overtaking across the line , although crossing may be allowed for a lawful turn or access movement when it can be completed safely and no sign prohibits it. It is not permission to drive along the opposing lane while looking for an address.
A solid lane line between same-direction lanes discourages or restricts lane changes at a conflict area, approach, or special lane. Stay in the assigned lane and follow nearby arrows and signs. If an emergency or officer direction requires deviation, do so only under that control and with due care.
Double solid barrier lines
Double solid yellow or white lines are a strong barrier marking: do not overtake and do not cross. They protect areas where opposing movements, sight distance, geometry, or traffic organization make crossing dangerous. Waiting behind a slow vehicle is the correct action until the barrier ends and a lawful, safe opportunity appears.
Solid-and-broken combinations
When a solid line and broken line appear together, obey the line nearest your lane. Traffic beside the broken line may cross when lawful and safe; traffic beside the solid line must not cross to overtake. This arrangement often allows one direction a passing opportunity while restricting the direction with poorer sight distance.
Do not copy the choice made by the vehicle ahead. Its driver may be on the broken side while you are on the solid side, or may simply be violating the marking. Decide from the marking adjacent to your own lane.
Lane and edge lines
White lane lines usually separate traffic moving in the same direction. Use them to center the vehicle and to judge whether a planned lane change can be completed without straddling. Avoid traveling on the line, weaving, or changing several lanes in one sweep. Complete one deliberate move, stabilize, and reassess.
Edge lines show the usable boundary of the carriageway and are valuable at night, in rain, and on curves. The shoulder beyond an edge line is not an ordinary overtaking lane. It may contain stopped vehicles, pedestrians, cyclists, debris, drainage openings, or a soft surface. Use it only when lawfully required or in a genuine emergency and only after checking that it is safe.
Reading markings with other controls
Paint can be faded, covered by water, or temporarily superseded by cones and authorized work-zone control. Reduce speed when markings are unclear. A traffic officer, lane signal, or temporary device may direct a safe temporary path, but absent such control the driver must not invent a lane.
Road arrows, stop lines, pedestrian crossings, and painted islands add instructions addressed in later sections. The core hierarchy is practical: obey the lawful officer, active signal, sign, and applicable marking together. When controls appear inconsistent, slow down and choose the action that avoids entering a prohibited or occupied space.
Motorcycle and wet-weather reading
Paint reduces grip when wet, especially for a motorcycle that is braking or leaning. Cross a permitted line as upright and smoothly as possible and avoid accelerating sharply on it. In heavy rain, use reflectors, edge lines, and the motion of traffic as supporting cues while maintaining enough space to stop if a marking disappears under water. Never assume a faded solid line has become a broken line. When classification is genuinely unclear, stay in the established lane, reduce speed, and wait for a sign, clearer marking, or safe route rather than attempting an overtake.
Marking decision table
- Marking beside your lane Basic decision
- Broken line Cross only when the maneuver is lawful and safe
- Single solid center line Do not overtake across it; a lawful turn may be allowed
- Double solid barrier Do not overtake or cross
- Solid-and-broken pair Obey the line nearest your lane
- Edge line Keep within the carriageway; shoulder is not a passing lane