Study guide
13.2 Solutions, Acids, and Bases
National Medical Admission Test NMAT
Track your progress as you read
Finished sections get a check mark.
1 Introduction & Exam Overview
1.1 Current NMAT Exam Facts 1.2 Registration, Eligibility, and Fees 1.3 Scoring, Percentiles, and Cutoffs 1.4 Test Day and How to Study
2 Part 1: Verbal Ability
2.1 Word Analogies 2.2 Reading Comprehension 2.3 Verbal Exam Tactics
3 Part 1: Inductive Reasoning — Series
3.1 Number Series 3.2 Letter Series 3.3 Figural Series
4 Part 1: Inductive Reasoning — Grouping & Strategy
4.1 Figure Grouping 4.2 Inductive Reasoning Strategies
5 Part 1: Quantitative — Operations & Problem Solving
5.1 Fundamental Operations 5.2 Problem Solving
6 Part 1: Quantitative — Data & Speed
6.1 Data Interpretation 6.2 Quantitative Speed Tactics
7 Part 1: Perceptual Acuity
7.1 Hidden Figures 7.2 Mirror Images 7.3 Identical Information 7.4 Perceptual Speed Tactics
8 Part 2: Biology — Life, Cells & Genetics
8.1 Unity and Diversity of Life 8.2 Cells and Cellular Processes 8.3 Genetics
9 Part 2: Biology — Organisms, Development & Environment
9.1 The World of Plants and Animals 9.2 Development 9.3 Regulation and Homeostasis 9.4 Organisms and Their Environment
10 Part 2: Physics — Mechanics & Thermodynamics
10.1 Mechanics 10.2 Thermodynamics
11 Part 2: Physics — Waves, EM & Modern Physics
11.1 Vibrations, Waves, and Optics 11.2 Electricity and Magnetism 11.3 Modern Physics
12 Part 2: Social Science
12.1 Psychology: Learning, Memory, and Cognition 12.2 Developmental and Social Psychology 12.3 Research Methods in Social Science 12.4 Sociology and Anthropology
13 Part 2: Chemistry — General & Analytical
13.1 General Chemistry: Atomic Structure, Bonding & Stoichiometry 13.2 Solutions, Acids, and Bases 13.3 Analytical Chemistry
14 Part 2: Chemistry — Organic, Biochem & Tactics
14.1 Organic Chemistry 14.2 Biochemistry 14.3 Chemistry Problem Tactics
15 Final Preparation & Medical School Strategy
15.1 Integrating Part 1 and Part 2 15.2 Percentile Targets, ERF, and Retakes
13.2 Solutions, Acids, and Bases
Key Takeaways Explain This Topic AI
Molarity M = moles solute / liters solution; percent by mass and dilution (M₁V₁ = M₂V₂) are the high-yield concentration tools for NMAT arithmetic
Colligative properties (vapor-pressure lowering, boiling-point elevation, freezing-point depression, osmotic pressure) depend on particle concentration, not particle identity, in ideal dilute solutions
Arrhenius acids produce H⁺ (H₃O⁺) in water and bases produce OH⁻; Brønsted–Lowry acids donate protons and bases accept protons — broader and more exam-useful for conjugate pairs
pH = −log[H₃O⁺], pOH = −log[OH⁻], and at 25°C pH + pOH = 14 for aqueous solutions; strong acids/bases fully dissociate, weak ones establish equilibria; buffers resist pH change using a weak acid–conjugate base pair
Chemical equilibrium is dynamic; Le Chatelier’s principle predicts shifts when concentration, pressure/volume (gases), or temperature is changed
Last updated: August 2026
13.2 Solutions, Acids, and Bases
Within CEM NMAT Chemistry (30 items, ~30 minutes), solutions , acids/bases , and equilibrium form a tightly linked cluster: concentration math feeds pH calculations, and weak-acid/base behavior is equilibrium applied to protons. Depth stays introductory college premed — expect clean strong-acid pH items, dilution algebra, and conceptual buffers/Le Chatelier rather than multi-step polyprotic ICE tables.
Quick frame: Molarity turns mass into “how many moles per liter.” pH is a log scale of [H₃O⁺]. Equilibrium is a two-way street; stress moves the position, not the meaning of the equilibrium constant’s temperature dependence.
Concentration units
Molarity (M): M = n s o l u t e V s o l u t i o n ( L ) M = \frac{n_{\mathrm{solute}}}{V_{\mathrm{solution}}(\mathrm{L})} M = V solution ( L ) n solute
Use liters of solution , not liters of pure solvent (unless dilute approximation is justified). Common related ideas: molality (mol solute / kg solvent) appears in colligative formulas; mass percent and volume percent are everyday lab labels.
Percent by mass (w/w): % w / w = m s o l u t e m s o l u t i o n × 100 % \%\,\mathrm{w/w} = \frac{m_{\mathrm{solute}}}{m_{\mathrm{solution}}} \times 100\% % w/w = m solution m solute × 100%
Worked example — molarity. Dissolve 5.85 g NaCl ( M = 58.5 g / m o l M = 58.5\,\mathrm{g/mol} M = 58.5 g/mol ) in water to make 0.500 L solution.
- n = 5.85 / 58.5 = 0.100 m o l n = 5.85/58.5 = 0.100\,\mathrm{mol} n = 5.85/58.5 = 0.100 mol
- M = 0.100 / 0.500 = 0.200 M M = 0.100/0.500 = 0.200\,\mathrm{M} M = 0.100/0.500 = 0.200 M
Worked example — mass percent. 10.0 g sugar in 90.0 g water → solution mass 100.0 g → % w/w = 10.0%.
Dilution: M 1 V 1 = M 2 V 2 M_1 V_1 = M_2 V_2 M 1 V 1 = M 2 V 2
Adding solvent keeps moles of solute constant: n = M 1 V 1 = M 2 V 2 n = M_1 V_1 = M_2 V_2 n = M 1 V 1 = M 2 V 2 . Volumes must use the same unit throughout (mL with mL is fine if consistent).
Worked example — dilution. How much 12.0 M HCl is needed to prepare 250 mL of 0.500 M HCl?
V 1 = M 2 V 2 / M 1 = ( 0.500 ) ( 250 ) / 12.0 = 10.4 m L V_1 = M_2 V_2 / M_1 = (0.500)(250)/12.0 = 10.4\,\mathrm{mL} V 1 = M 2 V 2 / M 1 = ( 0.500 ) ( 250 ) /12.0 = 10.4 mL of concentrated stock, then dilute to 250 mL total.
Worked example — after dilution. 25.0 mL of 2.00 M NaOH diluted to 100.0 mL:
M 2 = M 1 V 1 / V 2 = ( 2.00 ) ( 25.0 ) / 100.0 = 0.500 M M_2 = M_1 V_1 / V_2 = (2.00)(25.0)/100.0 = 0.500\,\mathrm{M} M 2 = M 1 V 1 / V 2 = ( 2.00 ) ( 25.0 ) /100.0 = 0.500 M .
Safety note (conceptual): add acid to water carefully in the lab; NMAT cares more about the mole balance than glassware choreography, but “dilution reduces concentration proportionally to volume increase” is the tested idea.
Colligative properties (conceptual)
Colligative properties depend on the number of solute particles per amount of solvent, not chemical identity (ideal dilute limit):
Vapor-pressure lowering (Raoult’s law idea): nonvolatile solute lowers solvent vapor pressure.
Boiling-point elevation: solution boils higher than pure solvent ( Δ T b = i K b m \Delta T_b = i K_b m Δ T b = i K b m ).
Freezing-point depression: solution freezes lower ( Δ T f = i K f m \Delta T_f = i K_f m Δ T f = i K f m ) — antifreeze and road salt themes.
Osmotic pressure: Π = i M R T \Pi = i MRT Π = i MRT conceptually — water flows toward higher solute concentration across a semipermeable membrane; critical for cells and IV fluid tonicity.
The van ’t Hoff factor (i) counts particles: glucose i ≈ 1 i \approx 1 i ≈ 1 ; NaCl i ≈ 2 i \approx 2 i ≈ 2 ; C a C l 2 \mathrm{CaCl_2} CaC l 2 i ≈ 3 i \approx 3 i ≈ 3 (ideal complete dissociation). Real solutions show ion pairing; NMAT usually uses ideal integers.
Acids and bases: Arrhenius and Brønsted
Arrhenius (aqueous): acid increases [H⁺]/[H₃O⁺]; base increases [OH⁻].
Brønsted–Lowry: acid is a proton donor ; base is a proton acceptor . Conjugate pairs differ by one H⁺ (e.g., H C l / C l − \mathrm{HCl/Cl^-} HCl/C l − , N H 4 + / N H 3 \mathrm{NH_4^+/NH_3} N H 4 + /N H 3 , H 2 O / O H − \mathrm{H_2O/OH^-} H 2 O/O H − , H 3 O + / H 2 O \mathrm{H_3O^+/H_2O} H 3 O + / H 2 O ). Water is amphoteric (can act as acid or base).
Strong acids (common list): HCl, HBr, HI, HNO₃, H₂SO₄ (first proton), HClO₄ — essentially complete dissociation in water. Strong bases: group 1 hydroxides (NaOH, KOH) and heavier group 2 hydroxides (Ba(OH)₂, etc.) — complete dissociation for soluble cases.
Weak acids/bases only partially dissociate; equilibrium constants K a K_a K a , K b K_b K b quantify strength (larger K a K_a K a → stronger weak acid). Do not confuse concentration with strength: 0.1 M HCl is strong and fully dissociated; 0.1 M acetic acid is weak and mostly undissociated.
pH, pOH, and strong acid/base calculations
At 25°C for pure water and dilute aqueous solutions: K w = [ H 3 O + ] [ O H − ] = 1.0 × 10 − 14 K_w = [\mathrm{H_3O^+}][\mathrm{OH^-}] = 1.0 \times 10^{-14} K w = [ H 3 O + ] [ O H − ] = 1.0 × 1 0 − 14 p H = − log [ H 3 O + ] , p O H = − log [ O H − ] , p H + p O H = 14 \mathrm{pH} = -\log[\mathrm{H_3O^+}], \quad \mathrm{pOH} = -\log[\mathrm{OH^-}], \quad \mathrm{pH} + \mathrm{pOH} = 14 pH = − lo g [ H 3 O + ] , pOH = − lo g [ O H − ] , pH + pOH = 14
Neutral: pH 7; acidic: pH < 7; basic: pH > 7 (at 25°C).
Strong monoprotic acid: [H₃O⁺] ≈ molarity of acid (if not extremely dilute). Strong monobasic base: [OH⁻] ≈ molarity of base; then pOH → pH = 14 − pOH.
Worked example — strong acid pH. What is pH of 0.010 M HCl?
[H₃O⁺] = 0.010 = 1.0 × 10⁻² → pH = 2.00.
Worked example — strong base pH. What is pH of 0.010 M NaOH?
[OH⁻] = 0.010 → pOH = 2.00 → pH = 12.00.
Worked example — dilution then pH. 10.0 mL of 0.100 M HCl diluted to 100.0 mL:
M 2 = ( 0.100 ) ( 10.0 ) / 100.0 = 0.0100 M M_2 = (0.100)(10.0)/100.0 = 0.0100\,\mathrm{M} M 2 = ( 0.100 ) ( 10.0 ) /100.0 = 0.0100 M → pH = 2.00.
Log scale reminder: each 1 unit pH change is a 10-fold change in [H₃O⁺]. pH 3 has 10× the [H₃O⁺] of pH 4.
Buffers (conceptual)
A buffer resists pH change when small amounts of strong acid or base are added. Classic composition: weak acid + its conjugate base (e.g., acetic acid + acetate) or weak base + conjugate acid (e.g., NH₃ + NH₄⁺). Mechanism: added H₃O⁺ is consumed by the conjugate base; added OH⁻ is consumed by the weak acid. Capacity fails if one component is exhausted or if huge amounts of strong acid/base are dumped.
Henderson–Hasselbalch (awareness level): p H = p K a + log ( [ A − ] / [ H A ] ) \mathrm{pH} = \mathrm{p}K_a + \log([\mathrm{A^-}]/[\mathrm{HA}]) pH = p K a + lo g ([ A − ] / [ HA ]) — pH near p K a K_a K a when ratio ≈ 1. Blood bicarbonate buffer is a medical-context example, not a calculation requirement for most NMAT items.
Equilibrium intro and Le Chatelier
At chemical equilibrium , forward and reverse rates are equal; concentrations are constant (not necessarily equal). The equilibrium constant (K) (large → products favored) depends on temperature .
Le Chatelier’s principle: if a stress is applied, the system shifts to partially counteract the stress.
- Stress Typical shift
- Add reactant Toward products
- Add product Toward reactants
- Remove product Toward products
- Increase P by decreasing V (gases) Toward fewer gas moles
- Increase temperature Toward endothermic direction
- Decrease temperature Toward exothermic direction
- Catalyst Reaches equilibrium faster; does not change (K) or equilibrium position
Worked conceptual: For N 2 + 3 H 2 ⇌ 2 N H 3 \mathrm{N_2 + 3\,H_2 \rightleftharpoons 2\,NH_3} N 2 + 3 H 2 ⇌ 2 N H 3 (exothermic forward), high pressure favors ammonia (fewer gas moles); high temperature favors reverse (Le Chatelier on heat as a product of the exothermic forward path).
Common traps
Using mL as liters in (M = n/V) (forget ×10⁻³).
Diluting by “halving concentration” without checking volumes.
Computing pH of NaOH as −log of molarity of NaOH (that gives pOH, not pH).
Calling a concentrated weak acid “strong.”
Thinking a catalyst changes equilibrium yield.
Confusing % w/w with molarity without density/molar mass.
Exam tactics
Always track moles of solute through dilutions.
For strong acid/base, write [H₃O⁺] or [OH⁻] first, then log.
Label conjugate pairs when Brønsted definitions are tested.
For Le Chatelier, identify heat as reactant or product from endo/exo wording.
Solutions and acid–base equilibrium are the bridge into analytical chemistry : titrations, indicators, and Beer's law all assume you can handle concentration and equivalence ideas cleanly.