Study guide
1.3 Geometry & Trigonometry Fundamentals
Philippine Military Academy Entrance Examination PMAEE
Track your progress as you read
Finished sections get a check mark.
1 Chapter 1: Mathematics
1.1 Arithmetic & Number Sense 1.2 Algebra & Equations 1.3 Geometry & Trigonometry Fundamentals 1.4 Mathematical Word Problems 1.5 Basic Statistics & Data Analysis
2 Chapter 2: English & Verbal Ability
2.1 English Grammar & Usage 2.2 Vocabulary & Word Relationships 2.3 Reading Comprehension & Composition Rules
3 Chapter 3: Abstract Reasoning
3.1 Visual & Spatial Pattern Analysis 3.2 Numerical & Alphabetical Sequences 3.3 Logical Reasoning & Word Puzzles
1.3 Geometry & Trigonometry Fundamentals
Key Takeaways Explain This Topic AI
Angle pairs like complementary (sum to 90 degrees) and supplementary (sum to 180 degrees) are foundational, especially when intersecting parallel lines with a transversal.
Pythagorean triples (like 3-4-5 and 5-12-13) and special right triangles (30-60-90 and 45-45-90) allow rapid side length calculations without tedious arithmetic.
Basic trigonometric ratios (sine, cosine, tangent) relate angles to side ratios in right triangles, and their values for common angles (30, 45, 60 degrees) should be memorized.
Coordinate geometry equations, such as slope, distance, and midpoint, translate geometric figures into algebraic coordinate calculations.
Parallel lines have equal slopes, whereas perpendicular lines have slopes that are negative reciprocals.
Last updated: July 2026
1.3 Geometry & Trigonometry Fundamentals
Geometry and trigonometry questions on the PMAEE evaluate spatial reasoning, coordinate graphing, and trigonometric relations. Memorizing formulas and recognizing geometric shortcuts are key to saving time.
Angles
An angle is formed by two rays sharing a common endpoint. Angles are classified by their measures:
- Acute angle : Less than 90 ∘ 90^\circ 9 0 ∘
- Right angle : Exactly 90 ∘ 90^\circ 9 0 ∘
- Obtuse angle : Greater than 90 ∘ 90^\circ 9 0 ∘ but less than 180 ∘ 180^\circ 18 0 ∘
- Straight angle : Exactly 180 ∘ 180^\circ 18 0 ∘
- Reflex angle : Greater than 180 ∘ 180^\circ 18 0 ∘ but less than 360 ∘ 360^\circ 36 0 ∘
- Angle Pairs
Complementary angles : Two angles whose sum is exactly 90 ∘ 90^\circ 9 0 ∘ .
Supplementary angles : Two angles whose sum is exactly 180 ∘ 180^\circ 18 0 ∘ .
Vertical angles : Opposing angles formed by intersecting lines; they are always equal.
Parallel Lines cut by a Transversal
When two parallel lines are intersected by a third line, called a transversal , specific angle relationships are established:
Corresponding angles are equal (e.g., top-right positions).
Alternate interior angles are equal (inside parallel lines, opposite sides of transversal).
Alternate exterior angles are equal (outside parallel lines, opposite sides of transversal).
Consecutive interior angles are supplementary (inside, same side of transversal).
Triangles
A triangle is a three-sided polygon. The sum of the interior angles of any triangle is always 180 ∘ 180^\circ 18 0 ∘ .
Area and Perimeter
Perimeter : P = a + b + c P = a + b + c P = a + b + c (sum of all sides).
Area : A = 1 2 b h A = \frac{1}{2}bh A = 2 1 bh , where b b b is the base and h h h is the altitude perpendicular to the base.
Heron's Formula (when height is unknown but all three sides are known): A = s ( s − a ) ( s − b ) ( s − c ) A = \sqrt{s(s-a)(s-b)(s-c)} A = s ( s − a ) ( s − b ) ( s − c )
where s s s is the semi-perimeter: s = a + b + c 2 s = \frac{a+b+c}{2} s = 2 a + b + c .
The Pythagorean Theorem
In any right triangle, the square of the length of the hypotenuse ( c c c ) is equal to the sum of the squares of the lengths of the legs ( a a a and b b b ): a 2 + b 2 = c 2 a^2 + b^2 = c^2 a 2 + b 2 = c 2
PMAEE frequently uses Pythagorean triples —sets of three integers that satisfy the theorem, saving you calculation time:
3 − 4 − 5 3-4-5 3 − 4 − 5 (and multiples like 6 − 8 − 10 , 9 − 12 − 15 6-8-10, 9-12-15 6 − 8 − 10 , 9 − 12 − 15 )
- 5 − 12 − 13 5-12-13 5 − 12 − 13 (and multiples like 10 − 24 − 26 10-24-26 10 − 24 − 26 )
- 8 − 15 − 17 8-15-17 8 − 15 − 17
- 7 − 24 − 25 7-24-25 7 − 24 − 25
- Special Right Triangles
Certain right triangles have fixed angle-to-side relationships:
45 ∘ − 45 ∘ − 90 ∘ 45^\circ - 45^\circ - 90^\circ 4 5 ∘ − 4 5 ∘ − 9 0 ∘ Right Triangle (Isosceles Right Triangle):
The ratio of sides is 1 : 1 : 2 1 : 1 : \sqrt{2} 1 : 1 : 2 .
If the legs are length x x x , the hypotenuse is x 2 x\sqrt{2} x 2 .
30 ∘ − 60 ∘ − 90 ∘ 30^\circ - 60^\circ - 90^\circ 3 0 ∘ − 6 0 ∘ − 9 0 ∘ Right Triangle :
The ratio of sides is 1 : 3 : 2 1 : \sqrt{3} : 2 1 : 3 : 2 .
If the side opposite the 30 ∘ 30^\circ 3 0 ∘ angle (shortest leg) is x x x , the side opposite the 60 ∘ 60^\circ 6 0 ∘ angle (longer leg) is x 3 x\sqrt{3} x 3 , and the hypotenuse is 2 x 2x 2 x .
Basic Trigonometric Ratios
Trigonometric ratios express the relationships between the acute angles of a right triangle and its sides:
Sine ( sin θ \sin \theta sin θ ) = Opposite Hypotenuse \frac{\text{Opposite}}{\text{Hypotenuse}} Hypotenuse Opposite (SOH)
Cosine ( cos θ \cos \theta cos θ ) = Adjacent Hypotenuse \frac{\text{Adjacent}}{\text{Hypotenuse}} Hypotenuse Adjacent (CAH)
Tangent ( tan θ \tan \theta tan θ ) = Opposite Adjacent \frac{\text{Opposite}}{\text{Adjacent}} Adjacent Opposite (TOA)
Reciprocal functions:
Cosecant ( csc θ \csc \theta csc θ ) = 1 sin θ = Hypotenuse Opposite \frac{1}{\sin \theta} = \frac{\text{Hypotenuse}}{\text{Opposite}} s i n θ 1 = Opposite Hypotenuse
Secant ( sec θ \sec \theta sec θ ) = 1 cos θ = Hypotenuse Adjacent \frac{1}{\cos \theta} = \frac{\text{Hypotenuse}}{\text{Adjacent}} c o s θ 1 = Adjacent Hypotenuse
Cotangent ( cot θ \cot \theta cot θ ) = 1 tan θ = Adjacent Opposite \frac{1}{\tan \theta} = \frac{\text{Adjacent}}{\text{Opposite}} t a n θ 1 = Opposite Adjacent
Trigonometric Values for Common Angles
- Angle ( θ \theta θ ) sin θ \sin \theta sin θ cos θ \cos \theta cos θ tan θ \tan \theta tan θ
- 30 ∘ 30^\circ 3 0 ∘ 1 2 \frac{1}{2} 2 1 3 2 \frac{\sqrt{3}}{2} 2 3 3 3 \frac{\sqrt{3}}{3} 3 3
- 45 ∘ 45^\circ 4 5 ∘ 2 2 \frac{\sqrt{2}}{2} 2 2 2 2 \frac{\sqrt{2}}{2} 2 2 1 1 1
- 60 ∘ 60^\circ 6 0 ∘ 3 2 \frac{\sqrt{3}}{2} 2 3 1 2 \frac{1}{2} 2 1 3 \sqrt{3} 3
- Polygons
A polygon is a closed, two-dimensional shape with straight sides. A regular polygon has all sides equal and all angles equal.
Formulas
Sum of interior angles : ( n − 2 ) ⋅ 180 ∘ (n - 2) \cdot 180^\circ ( n − 2 ) ⋅ 18 0 ∘ , where n n n is the number of sides.
Individual interior angle of a regular polygon : ( n − 2 ) ⋅ 180 ∘ n \frac{(n-2) \cdot 180^\circ}{n} n ( n − 2 ) ⋅ 18 0 ∘
Sum of exterior angles : Always 360 ∘ 360^\circ 36 0 ∘ for any convex polygon.
- Individual exterior angle of a regular polygon : 360 ∘ n \frac{360^\circ}{n} n 36 0 ∘
- Quadrilaterals
Quadrilaterals are four-sided polygons. Key classes include:
Parallelogram : Opposite sides parallel and equal. Diagonals bisect each other.
Rectangle : Parallelogram with four right angles. Diagonals are equal.
Rhombus : Parallelogram with four equal sides. Diagonals are perpendicular.
Square : Parallelogram with four equal sides and four right angles.
Trapezoid : Quadrilateral with exactly one pair of parallel sides (called bases). Area A = a + b 2 ⋅ h A = \frac{a+b}{2} \cdot h A = 2 a + b ⋅ h .
Circles
A circle is the set of all points in a plane at a given distance from a center.
Diameter : d = 2 r d = 2r d = 2 r , where r r r is the radius.
- Circumference : C = 2 π r = π d C = 2\pi r = \pi d C = 2 π r = π d
- Area : A = π r 2 A = \pi r^2 A = π r 2
Arc Length : L = θ 360 ∘ ⋅ 2 π r L = \frac{\theta}{360^\circ} \cdot 2\pi r L = 36 0 ∘ θ ⋅ 2 π r , where θ \theta θ is the central angle in degrees.
Sector Area : A s = θ 360 ∘ ⋅ π r 2 A_s = \frac{\theta}{360^\circ} \cdot \pi r^2 A s = 36 0 ∘ θ ⋅ π r 2
Chord : A line segment connecting two points on a circle. The longest chord is the diameter.
Coordinate Geometry
Coordinate geometry maps geometric shapes onto the Cartesian plane using ordered pairs ( x , y ) (x, y) ( x , y ) .
Key Formulas
Given two points P 1 ( x 1 , y 1 ) P_1(x_1, y_1) P 1 ( x 1 , y 1 ) and P 2 ( x 2 , y 2 ) P_2(x_2, y_2) P 2 ( x 2 , y 2 ) :
Slope ( m m m ) : Measures the steepness of a line. m = y 2 − y 1 x 2 − x 1 m = \frac{y_2 - y_1}{x_2 - x_1} m = x 2 − x 1 y 2 − y 1
Distance Formula : Derived from the Pythagorean theorem. d = ( x 2 − x 1 ) 2 + ( y 2 − y 1 ) 2 d = \sqrt{(x_2 - x_1)^2 + (y_2 - y_1)^2} d = ( x 2 − x 1 ) 2 + ( y 2 − y 1 ) 2
Midpoint Formula : Finds the center point between two coordinates. M = ( x 1 + x 2 2 , y 1 + y 2 2 ) M = \left( \frac{x_1 + x_2}{2}, \frac{y_1 + y_2}{2} \right) M = ( 2 x 1 + x 2 , 2 y 1 + y 2 )
Slopes of Parallel and Perpendicular Lines
Parallel lines : Have identical slopes ( m 1 = m 2 m_1 = m_2 m 1 = m 2 ).
Perpendicular lines : Have slopes that are negative reciprocals ( m 1 ⋅ m 2 = − 1 m_1 \cdot m_2 = -1 m 1 ⋅ m 2 = − 1 ). For example, if a line has a slope of 3 / 4 3/4 3/4 , the line perpendicular to it has a slope of − 4 / 3 -4/3 − 4/3 .
Loading diagram...