Study guide
6.3 Building Envelope: Waterproofing, Doors, Windows & Roofing
PRC Architect Licensure Examination ALE
Track your progress as you read
Finished sections get a check mark.
1 Introduction
About the PRC Architect Licensure Examination (ALE) How the ALE Is Organized & Scored
2 Chapter 1: Philippine & World Architectural History
1.1 Pre-Colonial & Spanish Colonial Philippine Architecture 1.2 American Colonial Period, Filipino Modernism & National Artists for Architecture 1.3 World Architectural History: Classical Through Modern Movements
3 Chapter 2: Architectural Theory & Planning Principles
2.1 Architectural Theories & Design Philosophies 2.2 Urban & Regional Planning Principles 2.3 Environmental Psychology & Human Behavior in Design
4 Chapter 3: RA 9266 and the Legal Framework of Practice
3.1 RA 9266: The Architecture Act of 2004 3.2 The PRBoA, Licensure & Scope of Practice 3.3 Code of Ethical Conduct for Architects
5 Chapter 4: Professional Practice, Contracts & UAP Standards
4.1 UAP Standards of Professional Practice (SPP Documents) 4.2 Contract Documents, Delivery Methods & Specifications 4.3 Professional Liability, Insurance & Construction Administration
6 Chapter 5: Structural Conceptualization & Systems
5.1 Structural Loads & Systems 5.2 Seismic Design Principles & the NSCP (Seismic Zone 4) 5.3 Structural Materials: Concrete, Steel, Timber & Masonry
7 Chapter 6: Building Materials & Construction Methods
6.1 Building Materials & Specifications 6.2 Construction Methods, Sequencing, QC & Safety 6.3 Building Envelope: Waterproofing, Doors, Windows & Roofing
8 Chapter 7: Building Utilities
7.1 Plumbing & Sanitary Systems 7.2 Electrical Systems & Illumination Design 7.3 HVAC, Mechanical Systems & Acoustics
9 Chapter 8: PD 1096 — The National Building Code
8.1 PD 1096 Development Controls: PSO, TGFA, FLAR & Setbacks 8.2 PD 1096 Fire Safety, Light, Ventilation & Occupancy 8.3 Applying PD 1096: Worked Examples & Common Exam Traps
10 Chapter 9: Site Analysis & Climate-Responsive Design
9.1 Site Analysis: Topography, Environmental Factors & Context 9.2 Tropical Climate-Responsive Design 9.3 Sustainable & Green Design Principles
11 Chapter 10: Programming & Space Planning
10.1 Space Programming & Functional Relationships 10.2 Circulation Systems & Spatial Organization 10.3 Building Typologies & User Requirements
12 Chapter 11: Zoning, Development Controls & Accessibility
11.1 Zoning Regulations, Setbacks & Site Development 11.2 BP 344 Accessibility Law & Universal Design 11.3 Life Safety, Egress & Fire-Code Compliance in Design
13 Chapter 12: Urban Design & Site Planning Process
12.1 Urban Design Principles & Site Development Concepts 12.2 Site Planning Process: From Analysis to Concept 12.3 Landscape Architecture & Site Development Elements
14 Chapter 13: Architectural Graphics, Presentation & Design Exam Strategy
13.1 Architectural Graphics: Plans, Sections, Elevations & Scales 13.2 Presentation Techniques & Design Communication 13.3 The ALE Design Exam Format: Problem-Solving Approach 13.4 Design Strategy & Time Management
6.3 Building Envelope: Waterproofing, Doors, Windows & Roofing
Key Takeaways Explain This Topic AI
PAGASA climatology shows roughly 20 tropical cyclones enter the Philippine Area of Responsibility in an average year, driving roofing and drainage design
Jalousie (louvered) windows provide near 100% operable ventilation area versus about half for a sliding sash of the same size
Roof-wall junctions and expansion joints are among the most common waterproofing failure points because the roof and wall move independently
Overflow scuppers give a low-slope or flat roof a redundant drainage path if the primary gutter or downspout becomes blocked
Laminated glass holds broken fragments to its PVB interlayer instead of releasing them, unlike tempered glass which disperses into granular pieces
Last updated: July 2026
Building Envelope: Waterproofing, Doors, Windows & Roofing
Quick Answer: The building envelope - roof, walls, at-grade and below-grade enclosure, and openings - must be detailed as one continuous system, because a single weak point (an undetailed roof-wall junction, an unsealed window frame, a torn membrane at an expansion joint) can compromise the whole assembly. In the Philippine climate, envelope decisions on waterproofing membranes, window operability, and roofing slope/drainage all respond directly to sustained, high-intensity tropical rainfall and frequent typhoon wind loads.
The Building Envelope as a System
The building envelope is the combination of the roof, exterior walls, at-grade and below-grade enclosure, and openings (doors and windows) that together control water intrusion, air movement, heat transfer, and daylight. Because these elements meet at continuous lines - parapets, sills, thresholds, joints - envelope failures overwhelmingly originate at these transitions rather than in the middle of an unbroken wall or roof surface. Architects must therefore detail the envelope as one coordinated system, not as a collection of independently selected components.
Waterproofing Principles and Common Failure Points
Reliable waterproofing rests on three complementary layers: correct slope and positive drainage that moves water away from the building before it can pond; a continuous membrane matched to the exposure condition; and careful detailing at every transition, penetration, and joint, which is where the great majority of real-world waterproofing failures originate, not in the membrane's unbroken field area.
Common membrane types include:
Cementitious waterproofing - a rigid, cement-based coating; economical for interior wet areas such as toilets and for below-grade walls, but brittle enough to crack if the substrate moves.
Bituminous (asphalt) membrane - a torch-applied or self-adhered modified-bitumen sheet; the traditional choice for roof decks, typically installed before ballast, pavers, or a roof garden is placed over it.
Elastomeric/liquid-applied membrane - a polyurethane- or acrylic-based coating, flexible enough to bridge hairline cracks and follow substrate movement; common on exposed roof decks and podium slabs.
Bentonite clay waterproofing - a sodium-bentonite panel or sheet placed against below-grade walls that swells on contact with groundwater to form a self-sealing barrier.
Three transitions deserve particular attention because they fail so often in practice:
Roof-wall junctions (parapets and upstands). The roof deck and the adjoining wall move differently under thermal expansion and structural deflection, so a membrane simply run up the wall face and left unrestrained will eventually crack. The standard detail turns base flashing up the wall and sets counter-flashing (or a reglet) into the wall to shed water down over the base flashing rather than behind it.
Expansion and control joints. Buildings expand, contract, and sway under thermal cycling, wind, and seismic movement, so a rigid waterproofing detail carried across a joint will simply tear. The joint needs a flexible waterproof system - a compressible backer rod and sealant, or a manufactured expansion-joint cover - sized to the anticipated movement.
Below-grade waterproofing. Basement and foundation walls face constant hydrostatic pressure from groundwater, which will exploit any gap in the membrane. The standard response pairs a positive-side (exterior-face) membrane with a protection board (to prevent puncture during backfilling) and a drainage board or weep system that relieves hydrostatic pressure rather than relying on the membrane alone to resist it indefinitely.
Doors and Windows for the Tropical Climate
- Window Type Operable Ventilation Area Best Suited To
- Jalousie/louvered Near 100% of the window area Airflow-priority spaces, lower wind exposure
- Awning (top-hinged) Moderate; sheds light rain Ventilation needed during rain
- Casement (side-hinged) Moderate; tight compression seal Exposed elevations, wind-driven rain resistance
- Sliding About half the window area Balconies, limited swing clearance
Jalousie (louvered) windows use horizontal glass or aluminum slats tilted open by a crank. Because nearly the entire window area is operable, they provide close to 100% ventilation opening compared with roughly half the opening on a sliding sash of the same size, and the slats can be angled to admit airflow while shedding light rain. Their weaknesses are the flip side of that openness: the individual slats and their end clips offer relatively weak resistance to wind-driven rain and typhoon-force wind uplift, and the many slat-to-slat joints are harder to weatherseal than a single continuous sash. Awning windows are top-hinged and swing outward, so the open sash itself sheds rain, letting the window stay open for ventilation even in light showers. Casement windows are side-hinged and crank-operated, closing to a tight compression seal against the frame; that seal gives them the best resistance to wind-driven rain among operable window types, which is why they are favored on more exposed elevations and upper floors, at the cost of requiring exterior clearance to swing. Sliding windows run in a horizontal track, need no swing clearance, and are simple to operate, but only about half the opening is ever operable at once, and their tracks require careful weatherstripping to resist wind-driven rain.
Door selection follows the same swing-versus-slide logic, with an added life-safety and accessibility layer under Batas Pambansa Blg. 344 (BP 344, the Accessibility Law): doors along an accessible path need adequate clear width and a low-profile threshold so they do not become a barrier to a wheelchair user.
Roofing System Design for Heavy Tropical Rainfall
Philippine Atmospheric, Geophysical and Astronomical Services Administration (PAGASA) climatology puts the average number of tropical cyclones entering the Philippine Area of Responsibility at roughly 20 per year, with several making direct landfall, so roofing systems must be designed for sustained, high-intensity rainfall rather than occasional showers. Slope is the first line of defense: lapped, corrugated sheet profiles generally need a steeper minimum slope than continuous long-span ribbed profiles, since fewer end-laps reduce the risk of capillary water backing up at a shallow pitch, but the exact minimum should always be confirmed against the selected product's manufacturer data sheet rather than assumed as one fixed number across all roofing types. Drainage capacity must be sized generously for high rainfall intensity, and low-slope or flat roof areas should always include overflow scuppers as a redundant path in case the primary gutter or downspout is blocked by debris; without an overflow path, a blocked drain on a flat roof can pond enough water to threaten a structural overload. Insulation in the Philippine context responds to heat rather than cold: a reflective radiant-barrier foil layer under the roofing sheet, often paired with a ventilated attic space or ridge vents, cuts radiant heat gain into the ceiling space and measurably reduces the air-conditioning load below. Material choice must also answer to climate directly: Galvalume (aluminum-zinc alloy-coated steel) and factory pre-painted finishes resist corrosion in humid, salt-laden coastal air far better than plain galvanized iron, and every fastener and lap detail must be specified for wind-uplift resistance given the wind loads that typhoons generate.