Study guide
How the ALE Is Organized & Scored
PRC Architect Licensure Examination ALE
Track your progress as you read
Finished sections get a check mark.
1 Introduction
About the PRC Architect Licensure Examination (ALE) How the ALE Is Organized & Scored
2 Chapter 1: Philippine & World Architectural History
1.1 Pre-Colonial & Spanish Colonial Philippine Architecture 1.2 American Colonial Period, Filipino Modernism & National Artists for Architecture 1.3 World Architectural History: Classical Through Modern Movements
3 Chapter 2: Architectural Theory & Planning Principles
2.1 Architectural Theories & Design Philosophies 2.2 Urban & Regional Planning Principles 2.3 Environmental Psychology & Human Behavior in Design
4 Chapter 3: RA 9266 and the Legal Framework of Practice
3.1 RA 9266: The Architecture Act of 2004 3.2 The PRBoA, Licensure & Scope of Practice 3.3 Code of Ethical Conduct for Architects
5 Chapter 4: Professional Practice, Contracts & UAP Standards
4.1 UAP Standards of Professional Practice (SPP Documents) 4.2 Contract Documents, Delivery Methods & Specifications 4.3 Professional Liability, Insurance & Construction Administration
6 Chapter 5: Structural Conceptualization & Systems
5.1 Structural Loads & Systems 5.2 Seismic Design Principles & the NSCP (Seismic Zone 4) 5.3 Structural Materials: Concrete, Steel, Timber & Masonry
7 Chapter 6: Building Materials & Construction Methods
6.1 Building Materials & Specifications 6.2 Construction Methods, Sequencing, QC & Safety 6.3 Building Envelope: Waterproofing, Doors, Windows & Roofing
8 Chapter 7: Building Utilities
7.1 Plumbing & Sanitary Systems 7.2 Electrical Systems & Illumination Design 7.3 HVAC, Mechanical Systems & Acoustics
9 Chapter 8: PD 1096 — The National Building Code
8.1 PD 1096 Development Controls: PSO, TGFA, FLAR & Setbacks 8.2 PD 1096 Fire Safety, Light, Ventilation & Occupancy 8.3 Applying PD 1096: Worked Examples & Common Exam Traps
10 Chapter 9: Site Analysis & Climate-Responsive Design
9.1 Site Analysis: Topography, Environmental Factors & Context 9.2 Tropical Climate-Responsive Design 9.3 Sustainable & Green Design Principles
11 Chapter 10: Programming & Space Planning
10.1 Space Programming & Functional Relationships 10.2 Circulation Systems & Spatial Organization 10.3 Building Typologies & User Requirements
12 Chapter 11: Zoning, Development Controls & Accessibility
11.1 Zoning Regulations, Setbacks & Site Development 11.2 BP 344 Accessibility Law & Universal Design 11.3 Life Safety, Egress & Fire-Code Compliance in Design
13 Chapter 12: Urban Design & Site Planning Process
12.1 Urban Design Principles & Site Development Concepts 12.2 Site Planning Process: From Analysis to Concept 12.3 Landscape Architecture & Site Development Elements
14 Chapter 13: Architectural Graphics, Presentation & Design Exam Strategy
13.1 Architectural Graphics: Plans, Sections, Elevations & Scales 13.2 Presentation Techniques & Design Communication 13.3 The ALE Design Exam Format: Problem-Solving Approach 13.4 Design Strategy & Time Management
How the ALE Is Organized & Scored
Key Takeaways Explain This Topic AI
The ALE passing rule requires a 70% general weighted average (GWA) AND no individual subject rating below 50%
Day 1 morning covers Subject 1 (History & Theory/Practice, 30%) and Day 1 afternoon covers Subject 2 (Structural/Materials/Utilities, 30%)
Day 2 is a full-day exam (about 8:00 AM to 6:00 PM) devoted entirely to the Architectural Design and Site Planning subject (40%)
A candidate scoring 85%, 90%, and 48% on the three subjects has a 71.7% GWA but still fails because Subject 3 is below the 50% floor
- The GWA formula is (Subject 1 score x 0.30) + (Subject 2 score x 0.30) + (Subject 3 score x 0.40)
- Last updated: July 2026
How the ALE Is Organized & Scored
Quick Answer: The ALE is given over two days: Day 1 morning covers Subject 1 (History & Theory/Practice), Day 1 afternoon covers Subject 2 (Structural/Materials/Utilities), and Day 2 is a full-day design exam covering Subject 3 (Architectural Design and Site Planning). To pass, a candidate needs a 70% general weighted average (GWA) across all three subjects and no individual subject rating below 50% — falling below 50% in even one subject fails the exam regardless of the overall average.
The Two-Day Exam Schedule
The ALE is administered over two examination days , following a session schedule set by the PRC for each sitting:
Day Session Subject Weight
Day 1 Morning (approx. 8:00 AM - 1:00 PM) History & Theory of Architecture, Principles of Planning & Architectural Practice 30%
Day 1 Afternoon (approx. 2:00 PM - 7:00 PM) Structural Design, Building Materials & Methods of Construction, and Utilities 30%
Day 2 Full day (approx. 8:00 AM - 6:00 PM) Architectural Design and Site Planning 40%
Day 2 is unlike the other two sessions: instead of only objective multiple-choice items, candidates work through an actual architectural design problem — a full-day board exercise in which they analyze a site and program, then produce planning and design solutions under time pressure. This is why review centers and self-study plans treat Day 2 as a distinct skill to practice, not just content to memorize.
The Passing Rule: 70% GWA, No Subject Below 50%
The PRBoA applies two conditions simultaneously, and a candidate must satisfy both to pass:
The general weighted average (GWA) across the three subjects must be at least 70% .
No individual subject rating may fall below 50%.
The second condition is a hard floor. Even a candidate with an excellent overall average fails the exam if a single subject drops below 50% — there is no way to "average out" a weak subject using strong subjects elsewhere. This design forces candidates to be competent across the entire syllabus rather than specializing in one or two subjects at the expense of a third.
How the Weighted Average Is Calculated
The GWA is computed by multiplying each subject's raw percentage score by its official weight, then summing the three results:
- GWA = (Subject 1 score x 0.30) + (Subject 2 score x 0.30) + (Subject 3 score x 0.40)
- Worked Example 1: A Passing Result
Suppose a candidate scores:
- Subject 1 (History & Theory/Practice, 30%): 75%
- Subject 2 (Structural/Materials/Utilities, 30%): 72%
- Subject 3 (Architectural Design & Site Planning, 40%): 78%
- GWA = (75 x 0.30) + (72 x 0.30) + (78 x 0.40) = 22.5 + 21.6 + 31.2 = 75.3%
Since the GWA is above 70% and every individual subject is above 50%, this candidate passes .
Worked Example 2: A Failing Result Despite a GWA Above 70%
Now suppose a different candidate scores:
- Subject 1 (30%): 85%
- Subject 2 (30%): 90%
- Subject 3 (40%): 48%
- GWA = (85 x 0.30) + (90 x 0.30) + (48 x 0.40) = 25.5 + 27.0 + 19.2 = 71.7%
At first glance, 71.7% looks like a comfortable pass since it clears the 70% threshold. But Subject 3's rating of 48% is below the required 50% minimum , so this candidate fails the ALE despite an overall GWA well above the passing line. This example is the single most important scoring concept for candidates to internalize: a strong overall average provides no protection against a subject-level failure, and Subject 3's large 40% weight makes a low score there especially dangerous to an otherwise strong average.
Retake Policy
Candidates who do not pass the ALE may apply to retake the examination at a future administration — the PRC schedules the ALE multiple times per year, so an unsuccessful candidate typically has another opportunity within months rather than waiting a full year. Consistent with the pattern followed by other PRC-administered licensure boards, examinees who fail repeatedly may be required to complete a refresher course through an accredited provider before being readmitted to a subsequent attempt; candidates in that situation should confirm the exact current requirement with the PRC or PRBoA, since specific refresher-course triggers can be updated by board resolution.
Building a Study Plan Around the Weights
Because Subject 3 (Architectural Design and Site Planning) carries 40% of the grade — the largest single share — and requires demonstrated design skill rather than recall alone, it deserves more than a proportional 40% of study time. A practical rule of thumb used by many review centers:
Allocate review hours roughly proportional to each subject's official weight as a starting floor (30% / 30% / 40%)
Add extra time on top of that proportional share for Subject 3 , since design problem-solving improves mainly through repeated, timed practice rather than reading alone
Build the plan over 6 to 12 months for most first-time examinees, moving from foundational content (laws, history, structural theory) toward full timed mock exams in the final stretch
Reserve the last few weeks before the exam for full-length, timed practice of all three subjects at the actual PRC session lengths (roughly five hours per Day 1 session and a full day for Day 2)
Treating the ALE's scoring rule as a planning tool, not just a pass/fail formula to memorize, is what separates candidates who study efficiently from those who over-prepare in subjects they already know and under-prepare in the one subject that decides most outcomes.