Study guide
6.3 Construction Occupational Safety and Health: RA 11058 and DOLE DO 13
PRC Civil Engineer Licensure Examination CELE
Track your progress as you read
Finished sections get a check mark.
1 Chapter 1: Examination Overview, RA 544 & Professional Practice
1.1 CELE Structure, Format, Scoring, and 2026 Subject Order 1.2 Republic Act No. 544: The Civil Engineering Law and Board Regulations 1.3 Civil Engineering Ethics, Contracts, and Professional Practice
2 Chapter 2: Engineering Mathematics, Numerical Methods & Physics
2.1 Advanced Algebra, Progressions & Word Problems 2.2 Trigonometry and Analytical Geometry 2.3 Differential and Integral Calculus 2.4 Differential Equations and Numerical Methods 2.5 Series, Hyperbolic Functions, Multivariable Calculus, and Laplace Transforms 2.6 Numerical Methods: Linear Systems, Interpolation, Curve Fitting, and ODE Solvers 2.7 Physics for Engineers: Kinematics, Newton's Laws, Work-Energy, and Momentum
3 Chapter 3: Engineering Data Analysis & Engineering Economy
3.1 Engineering Data Analysis and Statistical Applications 3.2 Parameter Estimation, Linear Regression, Correlation, and Queuing Models 3.3 Engineering Economy: Time Value of Money and Interest Formulas 3.4 Project Evaluation, Depreciation, and Benefit-Cost Analysis
4 Chapter 4: Surveying Fundamentals, Construction Layout & Route Surveying
4.1 Errors, Corrections, and Pacing/Taping 4.2 Leveling, Earthworks, and Mass Haul Diagrams 4.3 Traverse Computations, Balancing, and Area Determinations 4.4 Route Surveying: Horizontal and Vertical Curves
5 Chapter 5: Highway & Transportation Engineering
5.1 Highway Geometric Design and Sight Distances 5.2 Traffic Engineering, Flow Fundamentals, and Pavement Design 5.3 Highway Policy, Route Location, Drainage, and Earthwork Slopes 5.4 Transportation Planning, Network Analysis, and Intermodal Systems
6 Chapter 6: Construction Materials, Methods, Management & Safety
6.1 Materials for Construction: Concrete, Formwork, Masonry, Steel, and Wood Products 6.2 Construction Equipment, Formwork, and Construction Methods 6.3 Construction Occupational Safety and Health: RA 11058 and DOLE DO 13 6.4 Construction Project Management, CPM/PERT, and Resource Scheduling 6.5 Construction Principles: Design Requirements, Project Organization, Cost Control, and Value Engineering 6.6 Quantity Surveying, Unit Cost Analysis, and Project Cost Estimates 6.7 Construction Trades and Specialties: Plumbing, Plastics, Doors and Windows, Finishes, and Electrical
7 Chapter 7: Fluid Properties, Hydrostatics & Buoyancy
7.1 Fluid Properties, Units, and Pressure Measurement 7.2 Hydrostatic Pressure on Plane and Curved Surfaces 7.3 Buoyancy, Flotation, and Accelerated Fluid Masses
8 Chapter 8: Hydrodynamics, Pipe Flow, Open Channels & Water Supply
8.1 Fluid Dynamics: Continuity and Energy Equations 8.2 Flow Measurement: Orifices, Weirs, and Venturi Meters 8.3 Fluid Flow in Pipes, Friction Losses, and Pipe Networks 8.4 Open Channel Flow, Manning's Equation, and Hydraulic Jump 8.5 Water Supply: Demand, Storage, Pumping, Distribution, and Treatment
9 Chapter 9: Soil Properties, Seepage & Stresses in Soil Mass
9.1 Soil Composition, Weight-Volume Phase Relationships 9.2 Soil Classification Systems (USCS & AASHTO) and Atterberg Limits 9.3 Soil Permeability, Seepage, Flow Nets, and Effective Stress 9.4 Stresses in Soil Mass, Stress Distribution, and Immediate and Secondary Settlement
10 Chapter 10: Consolidation, Soil Strength, Earth Pressures & Foundations
10.1 Soil Compaction and Soil Compressibility/Consolidation 10.2 Shear Strength of Soils and Mohr-Coulomb Failure Criteria 10.3 Lateral Earth Pressures (Rankine & Coulomb) and Retaining Walls 10.4 Shallow and Deep Foundation Bearing Capacity and Slope Stability
11 Chapter 11: Engineering Mechanics & Statics
11.1 Force Systems, Resultants, and Equilibrium of Rigid Bodies 11.2 Centroids, Moments of Inertia, and Friction 11.3 Cables, Trusses, and Internal Forces in Members
12 Chapter 12: Strength of Materials
12.1 Axial Stress, Strain, and Deformation 12.2 Torsion, Flanged Bolt Couplings, and Thin-Walled Pressure Vessels 12.3 Beam Stresses: Flexural and Transverse Shear 12.4 Beam Deflections, Combined Stresses, and Mohr's Circle
13 Chapter 13: Structural Analysis & NSCP Load Criteria
13.1 Indeterminate Structures: Approximate and Classical Methods 13.2 Moment Distribution Method and Slope Deflection 13.3 Influence Lines for Determinate and Indeterminate Structures 13.4 NSCP Minimum Design Loads: Dead, Live, Wind, and Earthquake
14 Chapter 14: Reinforced Concrete Design (NSCP 2015 / USD)
14.1 Ultimate Strength Design (USD) Principles and Singly Reinforced Beams 14.2 Doubly Reinforced Beams and T-Beams 14.3 Shear and Diagonal Tension, Stirrup Design, and Development Length 14.4 Reinforced Concrete Columns and Isolated Footing Design
15 Chapter 15: Steel, Timber & Prestressed Design and Materials Testing
15.1 Structural Steel Tension Members and Connections 15.2 Structural Steel Compression Members and Beam Design 15.3 Timber Design Principles, Working Stress, and Sawn Lumber Beams 15.4 Prestressed Concrete Fundamentals and Prestress Losses 15.5 Construction Materials Testing and Concrete Mix Proportioning
6.3 Construction Occupational Safety and Health: RA 11058 and DOLE DO 13
Key Takeaways Explain This Topic AI
RA 11058 allows DOLE to impose administrative fines of up to ₱100,000 per day until an OSH violation is corrected.
DOLE DO 13 (1998) requires every construction project to have a Construction Safety and Health Program submitted to the Bureau of Working Conditions.
Under DO 13, workers on unguarded surfaces 6 meters or more above ground or water must be provided with safety harnesses and lifelines.
DO 13 requires the cost of the safety and health program to be a separate pay item in the tender and contract documents.
DO 13 requires a 40-hour basic construction safety and health training course for safety personnel, plus 16 hours of continuing training each year.
Last updated: October 2026
6.3 Construction Occupational Safety and Health: RA 11058 and DOLE DO 13
The AMSTHC TOS area "Construction Occupational Safety and Health" has five competencies:
Enumerate injury accidents, their causes, and the cost of construction worker injuries.
Recall the salient features of RA 11058.
Identify problem areas in construction safety and the elements of an effective program.
Assess safety issues in contracts, record keeping, safety culture and safe workers.
Describe top-management practices, company activities and project coordination for safety.
The legal framework has three layers:
The Labor Code and the Occupational Safety and Health Standards (OSHS) , including Rule 1410 on construction safety.
DOLE Department Order No. 13, s. 1998 , "Guidelines Governing Occupational Safety and Health in the Construction Industry."
RA 11058 (2018) , "An Act Strengthening Compliance with Occupational Safety and Health Standards and Providing Penalties for Violations Thereof." Its implementing rules were DO 198-18, which DO 252-25 revised effective May 16, 2025.
Accidents, Causes and Costs
Major construction hazards:
- falls from height (scaffolds, slab edges, roofs, openings);
- being struck by falling objects or moving equipment;
- caught-in or between incidents (trench collapse, machinery);
- electrocution;
collapse of formwork or temporary structures.
Causes:
Unsafe acts: working without fall protection, bypassing guards, operating equipment without certification.
Unsafe conditions: missing guardrails, unshored trenches, poor housekeeping, defective equipment.
Root causes often lie in management: inadequate planning, training, supervision and budget.
Costs.
Direct (insured) costs include medical care and compensation.
Indirect (uninsured) costs are usually several times larger: lost productivity, idle crews, damaged equipment and materials, investigation time, schedule delays, legal costs, and damage to reputation.
Accident statistics let projects compare performance:
Frequency rate = Lost-time injuries × 1,000,000 Hours worked , Severity rate = Days lost × 1,000,000 Hours worked \text{Frequency rate} = \frac{\text{Lost-time injuries} \times 1{,}000{,}000}{\text{Hours worked}}, \qquad \text{Severity rate} = \frac{\text{Days lost} \times 1{,}000{,}000}{\text{Hours worked}} Frequency rate = Hours worked Lost-time injuries × 1 , 000 , 000 , Severity rate = Hours worked Days lost × 1 , 000 , 000
Example. A project logs 400,000 work-hours with 2 lost-time injuries and 70 days lost. The frequency rate is 2 ( 10 6 ) / 400,000 = 5.0 2(10^6)/400{,}000 = 5.0 2 ( 1 0 6 ) /400 , 000 = 5.0 and the severity rate is 70 ( 10 6 ) / 400,000 = 175 70(10^6)/400{,}000 = 175 70 ( 1 0 6 ) /400 , 000 = 175 .
RA 11058: Salient Features
Coverage. All establishments, projects and sites, including those in economic zones.
Employer duties.
Provide a safe workplace and comply with the OSH standards.
Furnish personal protective equipment (PPE) at no cost to workers.
Give hazard information and training.
Keep and report records of illnesses and accidents.
Workers' rights.
The right to know the hazards of the work.
The right to refuse unsafe work where there is imminent danger, without loss of pay or reprisal.
The right to report accidents and hazards.
The right to PPE.
OSH program and personnel. Workplaces must have an OSH program, an OSH committee, trained safety officers, and first-aid or health personnel scaled to workforce size and risk.
Enforcement. DOLE may issue compliance orders and work stoppage orders where there is imminent danger.
Penalties. Section 28 allows administrative fines of up to ₱100,000 per day until the violation is corrected. The maximum applies when the violation exposes workers to death, serious injury or serious illness. Separate fines apply to obstruction and concealment.
DOLE DO 13: Construction Requirements
Provision Requirement
Construction Safety and Health Program (Sec. 5) Required for every project. It states committee composition, safety policies including toolbox meetings, penalties, training, and waste disposal. It is executed and verified by the project manager and submitted to the Bureau of Working Conditions , which may approve, disapprove or modify it.
Program cost (Sec. 5.3) Integrated into project cost as a separate pay item in tender and contract documents
PPE (Sec. 6) Furnished by the employer at its own expense. Workers on unguarded surfaces 6 m or more above ground or water, or exposed to dangerous falls, must have safety harnesses and lifelines .
Safety personnel (Sec. 7) A full-time general construction safety and health officer; additional officers by workforce size; one officer for every 10 units of heavy equipment; a safety representative for each subcontractor
Emergency health personnel (Sec. 8) Certified first-aider for 50 or fewer workers; full-time nurse for 51 to 200; nurse plus part-time physician and dentist for 201 to 300; full-time physician and infirmary beyond 300
Heavy equipment (Sec. 10) Operators tested and certified (TESDA); equipment tested and certified; daily inspection logbooks
Safety committee (Sec. 11) Chaired by the project manager; initiates daily toolbox meetings
Training (Sec. 12–13) Safety and health awareness seminar before deployment; specialized training for scaffold work, excavations at least 1 m deep, explosives, pile driving and similar work; 40-hour basic construction safety training for safety personnel, plus 16 hours per year continuing
Reports (Sec. 14) Monthly safety report. Notify the DOLE regional office within 24 hours of a dangerous occurrence or a major accident causing death or permanent total disability.
Problem Areas and Elements of an Effective Program
Problem areas:
- excavations and trenches (cave-in, falling material, access);
- scaffolds and work at height;
- cranes and rigging;
- electrical systems;
- formwork and shoring;
- demolition;
- confined spaces;
traffic at road works.
Elements of an effective program:
Management commitment in a written policy, budget and visible leadership.
Hazard identification and risk assessment before each activity, with controls chosen by the hierarchy of controls : elimination, substitution, engineering controls, administrative controls, then PPE as the last line of defense.
Training and orientation for every worker, including daily toolbox meetings.
Inspection and auditing of scaffolds, equipment and housekeeping.
Incident reporting and investigation , aimed at root causes rather than blame.
Emergency preparedness : first aid, evacuation, fire response.
Subcontractor control : the same rules for all workers on site.
Safety in Contracts, Records and Culture
Contracts. Specify safety requirements and the safety pay item, require approval of the safety program before mobilization, and allocate responsibility among owner, contractor and subcontractors.
Records. Keep training records, toolbox meeting minutes, inspection checklists, equipment certifications, accident and near-miss reports, and the monthly reports to DOLE.
Safety culture means workers stop unsafe work without fear and report near misses. Supervisors are measured on safety as well as progress.
Management practices.
Plan safety into the schedule, for example installing edge protection as each slab is cast.
Coordinate trades so they do not work above one another.
Hold pre-task meetings.
Recognize good performance.