Study guide

2.1 Advanced Algebra, Progressions & Word Problems

PRC Civil Engineer Licensure Examination CELE

Track your progress as you read

Finished sections get a check mark.

1 Chapter 1: Examination Overview, RA 544 & Professional Practice

1.1 CELE Structure, Format, Scoring, and 2026 Subject Order 1.2 Republic Act No. 544: The Civil Engineering Law and Board Regulations 1.3 Civil Engineering Ethics, Contracts, and Professional Practice

2 Chapter 2: Engineering Mathematics, Numerical Methods & Physics

2.1 Advanced Algebra, Progressions & Word Problems 2.2 Trigonometry and Analytical Geometry 2.3 Differential and Integral Calculus 2.4 Differential Equations and Numerical Methods 2.5 Series, Hyperbolic Functions, Multivariable Calculus, and Laplace Transforms 2.6 Numerical Methods: Linear Systems, Interpolation, Curve Fitting, and ODE Solvers 2.7 Physics for Engineers: Kinematics, Newton's Laws, Work-Energy, and Momentum

3 Chapter 3: Engineering Data Analysis & Engineering Economy

3.1 Engineering Data Analysis and Statistical Applications 3.2 Parameter Estimation, Linear Regression, Correlation, and Queuing Models 3.3 Engineering Economy: Time Value of Money and Interest Formulas 3.4 Project Evaluation, Depreciation, and Benefit-Cost Analysis

4 Chapter 4: Surveying Fundamentals, Construction Layout & Route Surveying

4.1 Errors, Corrections, and Pacing/Taping 4.2 Leveling, Earthworks, and Mass Haul Diagrams 4.3 Traverse Computations, Balancing, and Area Determinations 4.4 Route Surveying: Horizontal and Vertical Curves

5 Chapter 5: Highway & Transportation Engineering

5.1 Highway Geometric Design and Sight Distances 5.2 Traffic Engineering, Flow Fundamentals, and Pavement Design 5.3 Highway Policy, Route Location, Drainage, and Earthwork Slopes 5.4 Transportation Planning, Network Analysis, and Intermodal Systems

6 Chapter 6: Construction Materials, Methods, Management & Safety

6.1 Materials for Construction: Concrete, Formwork, Masonry, Steel, and Wood Products 6.2 Construction Equipment, Formwork, and Construction Methods 6.3 Construction Occupational Safety and Health: RA 11058 and DOLE DO 13 6.4 Construction Project Management, CPM/PERT, and Resource Scheduling 6.5 Construction Principles: Design Requirements, Project Organization, Cost Control, and Value Engineering 6.6 Quantity Surveying, Unit Cost Analysis, and Project Cost Estimates 6.7 Construction Trades and Specialties: Plumbing, Plastics, Doors and Windows, Finishes, and Electrical

7 Chapter 7: Fluid Properties, Hydrostatics & Buoyancy

7.1 Fluid Properties, Units, and Pressure Measurement 7.2 Hydrostatic Pressure on Plane and Curved Surfaces 7.3 Buoyancy, Flotation, and Accelerated Fluid Masses

8 Chapter 8: Hydrodynamics, Pipe Flow, Open Channels & Water Supply

8.1 Fluid Dynamics: Continuity and Energy Equations 8.2 Flow Measurement: Orifices, Weirs, and Venturi Meters 8.3 Fluid Flow in Pipes, Friction Losses, and Pipe Networks 8.4 Open Channel Flow, Manning's Equation, and Hydraulic Jump 8.5 Water Supply: Demand, Storage, Pumping, Distribution, and Treatment

9 Chapter 9: Soil Properties, Seepage & Stresses in Soil Mass

9.1 Soil Composition, Weight-Volume Phase Relationships 9.2 Soil Classification Systems (USCS & AASHTO) and Atterberg Limits 9.3 Soil Permeability, Seepage, Flow Nets, and Effective Stress 9.4 Stresses in Soil Mass, Stress Distribution, and Immediate and Secondary Settlement

10 Chapter 10: Consolidation, Soil Strength, Earth Pressures & Foundations

10.1 Soil Compaction and Soil Compressibility/Consolidation 10.2 Shear Strength of Soils and Mohr-Coulomb Failure Criteria 10.3 Lateral Earth Pressures (Rankine & Coulomb) and Retaining Walls 10.4 Shallow and Deep Foundation Bearing Capacity and Slope Stability

11 Chapter 11: Engineering Mechanics & Statics

11.1 Force Systems, Resultants, and Equilibrium of Rigid Bodies 11.2 Centroids, Moments of Inertia, and Friction 11.3 Cables, Trusses, and Internal Forces in Members

12 Chapter 12: Strength of Materials

12.1 Axial Stress, Strain, and Deformation 12.2 Torsion, Flanged Bolt Couplings, and Thin-Walled Pressure Vessels 12.3 Beam Stresses: Flexural and Transverse Shear 12.4 Beam Deflections, Combined Stresses, and Mohr's Circle

13 Chapter 13: Structural Analysis & NSCP Load Criteria

13.1 Indeterminate Structures: Approximate and Classical Methods 13.2 Moment Distribution Method and Slope Deflection 13.3 Influence Lines for Determinate and Indeterminate Structures 13.4 NSCP Minimum Design Loads: Dead, Live, Wind, and Earthquake

14 Chapter 14: Reinforced Concrete Design (NSCP 2015 / USD)

14.1 Ultimate Strength Design (USD) Principles and Singly Reinforced Beams 14.2 Doubly Reinforced Beams and T-Beams 14.3 Shear and Diagonal Tension, Stirrup Design, and Development Length 14.4 Reinforced Concrete Columns and Isolated Footing Design

15 Chapter 15: Steel, Timber & Prestressed Design and Materials Testing

15.1 Structural Steel Tension Members and Connections 15.2 Structural Steel Compression Members and Beam Design 15.3 Timber Design Principles, Working Stress, and Sawn Lumber Beams 15.4 Prestressed Concrete Fundamentals and Prestress Losses 15.5 Construction Materials Testing and Concrete Mix Proportioning

2.1 Advanced Algebra, Progressions & Word Problems

Key Takeaways Explain This Topic AI

For any quadratic equation ax² + bx + c = 0, root nature is governed by discriminant Δ = b² - 4ac, while Vieta's formulas establish that root sum is -b/a and root product is c/a.

The general (r+1)-th term in a binomial expansion (a + b)ⁿ is T_{r+1} = binom(n, r) a^{n-r} b^r; for even n, the unique middle term occurs at r = n/2.

Arithmetic, geometric, and harmonic series exhibit distinct sum mechanics; an infinite geometric series converges to S_inf = a₁ / (1 - r) if and only if |r| < 1.

Standard CELE word problems are solved via unit rates: work problems use reciprocal time rates, clock hands separate at 5.5 deg/min (11/12 min-spaces/min), and round trips at different speeds require the harmonic mean.

Last updated: October 2026

2.1 Advanced Algebra, Progressions & Word Problems

Advanced algebra and progression series constitute the computational foundation of the Applied Mathematics cluster in the Philippine Civil Engineering Licensure Examination (CELE). Board exam problems frequently combine polynomial algebra, progression theory, and rate-based word problems into multi-step engineering scenarios. Mastery of both algebraic derivations and high-speed calculator-supported solution strategies is essential for completing the examination within the strict allotted time.

  • Quadratic Equations & Polynomial Theory
  • Standard Form and Discriminant Analysis

A quadratic equation in standard form is expressed as: a x 2 + b x + c = 0 ( a ≠ 0 ) ax^2 + bx + c = 0 \quad (a \ne 0) a x 2 + b x + c = 0 ( a  = 0 )

Its roots are obtained analytically via the quadratic formula: x = − b ± b 2 − 4 a c 2 a x = \frac{-b \pm \sqrt{b^2 - 4ac}}{2a} x = 2 a − b ± b 2 − 4 a c ​ ​

The algebraic nature of the roots is governed entirely by the discriminant Δ = b 2 − 4 a c \Delta = b^2 - 4ac Δ = b 2 − 4 a c :

Discriminant ( Δ \Delta Δ ) Nature of Roots Geometric Interpretation on x y xy x y -Plane

Δ > 0 \Delta > 0 Δ > 0 , perfect square Two distinct real, rational roots Parabola intersects the x x x -axis at two distinct rational points

Δ > 0 \Delta > 0 Δ > 0 , non-square Two distinct real, irrational roots (conjugate surds) Parabola intersects the x x x -axis at two distinct irrational points

Δ = 0 \Delta = 0 Δ = 0 Real, equal roots (single repeated root x = − b / 2 a x = -b/2a x = − b /2 a ) Parabola is tangent to the x x x -axis at its vertex

Δ < 0 \Delta < 0 Δ < 0 Two complex conjugate roots ( x = α ± i β x = \alpha \pm i\beta x = α ± i β ) Parabola does not intersect or touch the x x x -axis

Vieta's Relations for Polynomial Roots

Vieta's formulas establish direct relationships between the coefficients of a polynomial and symmetric sums of its roots without requiring explicit factorization:

Quadratic ( a x 2 + b x + c = 0 ax^2 + bx + c = 0 a x 2 + b x + c = 0 ): Sum of roots: x 1 + x 2 = − b a \text{Sum of roots: } x_1 + x_2 = -\frac{b}{a} Sum of roots: x 1 ​ + x 2 ​ = − a b ​ Product of roots: x 1 x 2 = c a \text{Product of roots: } x_1 x_2 = \frac{c}{a} Product of roots: x 1 ​ x 2 ​ = a c ​

Cubic ( a x 3 + b x 2 + c x + d = 0 ax^3 + bx^2 + cx + d = 0 a x 3 + b x 2 + c x + d = 0 ): x 1 + x 2 + x 3 = − b a x_1 + x_2 + x_3 = -\frac{b}{a} x 1 ​ + x 2 ​ + x 3 ​ = − a b ​ x 1 x 2 + x 2 x 3 + x 3 x 1 = c a x_1 x_2 + x_2 x_3 + x_3 x_1 = \frac{c}{a} x 1 ​ x 2 ​ + x 2 ​ x 3 ​ + x 3 ​ x 1 ​ = a c ​ x 1 x 2 x 3 = − d a x_1 x_2 x_3 = -\frac{d}{a} x 1 ​ x 2 ​ x 3 ​ = − a d ​

Remainder & Factor Theorems

Remainder Theorem: If a polynomial P ( x ) P(x) P ( x ) is divided by a linear divisor ( x − r ) (x - r) ( x − r ) , the scalar remainder R R R is identical to the functional evaluation R = P ( r ) R = P(r) R = P ( r ) .

Factor Theorem: A linear binomial ( x − r ) (x - r) ( x − r ) is a factor of P ( x ) P(x) P ( x ) if and only if P ( r ) = 0 P(r) = 0 P ( r ) = 0 .

Synthetic Division: A rapid tabular shortcut used on board exam scratch papers to evaluate P ( r ) P(r) P ( r ) and determine the depressed polynomial quotient.

Descartes' Rule of Signs: The number of positive real roots of a real polynomial P ( x ) P(x) P ( x ) equals the number of sign variations between consecutive non-zero coefficients or is less by an even positive integer. The number of negative real roots equals the sign variations in P ( − x ) P(-x) P ( − x ) or is less by an even positive integer.

The Binomial Theorem & Term Expansion

For any positive integer n n n , the expansion of the binomial ( a + b ) n (a + b)^n ( a + b ) n is given by: ( a + b ) n = ∑ k = 0 n ( n k ) a n − k b k = ( n 0 ) a n + ( n 1 ) a n − 1 b + ⋯ + ( n n ) b n (a + b)^n = \sum_{k=0}^{n} \binom{n}{k} a^{n-k} b^k = \binom{n}{0}a^n + \binom{n}{1}a^{n-1}b + \dots + \binom{n}{n}b^n ( a + b ) n = ∑ k = 0 n ​ ( k n ​ ) a n − k b k = ( 0 n ​ ) a n + ( 1 n ​ ) a n − 1 b + ⋯ + ( n n ​ ) b n

Where the binomial coefficient is evaluated as: ( n k ) = n ! k ! ( n − k ) ! \binom{n}{k} = \frac{n!}{k!(n-k)!} ( k n ​ ) = k ! ( n − k )! n ! ​

Properties of the Expansion

Total Number of Terms: An expansion of degree n n n contains exactly n + 1 n + 1 n + 1 terms.

Sum of Coefficients: Evaluated by substituting all variable terms with unity: Sum = ( a + b ) n ∣ a = 1 , b = 1 = 2 n \text{Sum} = (a + b)^n \big|_{a=1, b=1} = 2^n Sum = ( a + b ) n ​ a = 1 , b = 1 ​ = 2 n .

General ( r + 1 ) (r+1) ( r + 1 ) -th Term Formula: T r + 1 = ( n r ) a n − r b r T_{r+1} = \binom{n}{r} a^{n-r} b^r T r + 1 ​ = ( r n ​ ) a n − r b r (Note: The r r r -value is always one less than the ordinal term position; for example, the 5th term uses r = 4 r = 4 r = 4 .)

Middle Terms:

If n n n is even, there is a single middle term at ordinal position n 2 + 1 \frac{n}{2} + 1 2 n ​ + 1 , where r = n 2 r = \frac{n}{2} r = 2 n ​ .

If n n n is odd, there are two symmetric middle terms at positions n + 1 2 \frac{n+1}{2} 2 n + 1 ​ and n + 3 2 \frac{n+3}{2} 2 n + 3 ​ , where r = n − 1 2 r = \frac{n-1}{2} r = 2 n − 1 ​ and r = n + 1 2 r = \frac{n+1}{2} r = 2 n + 1 ​ .

Constant Term (Term Independent of x x x ): Formulated by equating the combined exponent of the variable x x x in T r + 1 T_{r+1} T r + 1 ​ to zero and solving for integer r r r .

Progression Series: Arithmetic, Geometric & Harmonic

Progressions model recurring patterns, depreciation schedules, drainage runoff steps, and structural load distributions.

Progression Type Defining Relationship n n n -th Term ( a n a_n a n ​ ) Sum of First n n n Terms ( S n S_n S n ​ ) Mean of a a a and b b b

Arithmetic (AP) Constant difference d = a k − a k − 1 d = a_k - a_{k-1} d = a k ​ − a k − 1 ​ a n = a 1 + ( n − 1 ) d a_n = a_1 + (n - 1)d a n ​ = a 1 ​ + ( n − 1 ) d S n = n 2 [ 2 a 1 + ( n − 1 ) d ] = n 2 ( a 1 + a n ) S_n = \frac{n}{2}[2a_1 + (n - 1)d] = \frac{n}{2}(a_1 + a_n) S n ​ = 2 n ​ [ 2 a 1 ​ + ( n − 1 ) d ] = 2 n ​ ( a 1 ​ + a n ​ ) A = a + b 2 A = \frac{a + b}{2} A = 2 a + b ​

Geometric (GP) Constant ratio r = a k a k − 1 r = \frac{a_k}{a_{k-1}} r = a k − 1 ​ a k ​ ​ a n = a 1 r n − 1 a_n = a_1 r^{n-1} a n ​ = a 1 ​ r n − 1 S n = a 1 ( 1 − r n ) 1 − r ( r ≠ 1 ) S_n = \frac{a_1(1 - r^n)}{1 - r} \quad (r \ne 1) S n ​ = 1 − r a 1 ​ ( 1 − r n ) ​ ( r  = 1 ) G = a b G = \sqrt{ab} G = ab ​

Harmonic (HP) Reciprocals 1 a n \frac{1}{a_n} a n ​ 1 ​ form an AP a n = 1 1 a 1 + ( n − 1 ) d ′ a_n = \frac{1}{\frac{1}{a_1} + (n - 1)d'} a n ​ = a 1 ​ 1 ​ + ( n − 1 ) d ′ 1 ​ No closed algebraic sum formula H = 2 a b a + b H = \frac{2ab}{a + b} H = a + b 2 ab ​

Infinite Geometric Series

When the common ratio satisfies the strict convergence criterion ∣ r ∣ < 1 |r| < 1 ∣ r ∣ < 1 , the higher-order terms r n → 0 r^n \to 0 r n → 0 as n → ∞ n \to \infty n → ∞ . The infinite sum converges to: S ∞ = a 1 1 − r ( ∣ r ∣ < 1 ) S_\infty = \frac{a_1}{1 - r} \quad (|r| < 1) S ∞ ​ = 1 − r a 1 ​ ​ ( ∣ r ∣ < 1 ) If ∣ r ∣ ≥ 1 |r| \ge 1 ∣ r ∣ ≥ 1 , the series diverges and has no finite sum.

Pythagorean Means Inequality

For any set of positive real numbers a a a and b b b : A ≥ G ≥ H A \ge G \ge H A ≥ G ≥ H a + b 2 ≥ a b ≥ 2 a b a + b \frac{a + b}{2} \ge \sqrt{ab} \ge \frac{2ab}{a + b} 2 a + b ​ ≥ ab ​ ≥ a + b 2 ab ​ The equality holds if and only if a = b a = b a = b . Furthermore, the geometric mean is the exact geometric mean of the arithmetic and harmonic means: G 2 = A ⋅ H G^2 = A \cdot H G 2 = A ⋅ H

Standard CELE Board Exam Word Problem Archetypes

CELE word problems test the ability to translate physical and engineering descriptions into algebraic models. Five classical problem archetypes appear regularly on the examination:

1. Work and Rate Problems

Work problems rely on reciprocal unit rates. If an agent completes a task in t t t time units, their rate of production is R = 1 t R = \frac{1}{t} R = t 1 ​ tasks per unit time.

Combined Simultaneous Work: ∑ R i = 1 t 1 + 1 t 2 + ⋯ + 1 t n = 1 T total \sum R_i = \frac{1}{t_1} + \frac{1}{t_2} + \dots + \frac{1}{t_n} = \frac{1}{T_{\text{total}}} ∑ R i ​ = t 1 ​ 1 ​ + t 2 ​ 1 ​ + ⋯ + t n ​ 1 ​ = T total ​ 1 ​

Hydraulic Pipes (Inlets & Outlets): Filling pipes contribute positive rates ( + 1 / t +1/t + 1/ t ), whereas drainage outlets contribute negative rates ( − 1 / t -1/t − 1/ t ): R net = ∑ 1 t in − ∑ 1 t out R_{\text{net}} = \sum \frac{1}{t_{\text{in}}} - \sum \frac{1}{t_{\text{out}}} R net ​ = ∑ t in ​ 1 ​ − ∑ t out ​ 1 ​

Interrupted / Sequential Work: If crew A works for time t A t_A t A ​ and crew B works for time t B t_B t B ​ to finish the complete project: R A t A + R B t B = 1.0 R_A t_A + R_B t_B = 1.0 R A ​ t A ​ + R B ​ t B ​ = 1.0

2. Mixture and Dilution Problems

Governed by the conservation of solute mass. In any combination of volumes: C 1 V 1 + C 2 V 2 = C final ( V 1 + V 2 ) C_1 V_1 + C_2 V_2 = C_{\text{final}}(V_1 + V_2) C 1 ​ V 1 ​ + C 2 ​ V 2 ​ = C final ​ ( V 1 ​ + V 2 ​ ) Where C C C represents solute concentration (percentage or decimal fraction) and V V V is volume.

Successive Dilution (Repeated Replacement): If a container of volume V V V initially full of pure liquid is repeatedly diluted by removing volume y y y and replacing it with pure solvent, the concentration remaining after n n n iterations is: x n = x 0 ( 1 − y V ) n x_n = x_0 \left(1 - \frac{y}{V}\right)^n x n ​ = x 0 ​ ( 1 − V y ​ ) n

3. Motion and Relative Velocity Problems

Governed by d = v ⋅ t d = v \cdot t d = v ⋅ t .

Upstream and Downstream Motion: v downstream = v still + v current v_{\text{downstream}} = v_{\text{still}} + v_{\text{current}} v downstream ​ = v still ​ + v current ​ v upstream = v still − v current v_{\text{upstream}} = v_{\text{still}} - v_{\text{current}} v upstream ​ = v still ​ − v current ​

Average Speed Over Equal Distances: When traveling distance D D D at speed v 1 v_1 v 1 ​ and returning the same distance D D D at speed v 2 v_2 v 2 ​ , total time is t = D / v 1 + D / v 2 t = D/v_1 + D/v_2 t = D / v 1 ​ + D / v 2 ​ . The overall average speed is the harmonic mean : v avg = 2 D D v 1 + D v 2 = 2 v 1 v 2 v 1 + v 2 v_{\text{avg}} = \frac{2D}{\frac{D}{v_1} + \frac{D}{v_2}} = \frac{2 v_1 v_2}{v_1 + v_2} v avg ​ = v 1 ​ D ​ + v 2 ​ D ​ 2 D ​ = v 1 ​ + v 2 ​ 2 v 1 ​ v 2 ​ ​ (Exam Alert: Never compute simple arithmetic average for round-trip speeds!)

4. Age Relationship Problems

Structured by setting up linear equations across distinct temporal frames: past ( x − N x - N x − N ), present ( x x x ), and future ( x + M x + M x + M ). The age difference between two individuals remains invariant across all time frames.

5. Clock Hands Problems

A standard circular clock dial is divided into 60 minute-spaces ( 360 ∘ 360^\circ 36 0 ∘ ).

Minute Hand Speed: 360 ∘ / 60 min = 6 ∘ / min = 1.0 minute-space/min 360^\circ / 60\text{ min} = 6^\circ/\text{min} = 1.0\text{ minute-space/min} 36 0 ∘ /60 min = 6 ∘ / min = 1.0 minute-space/min .

Hour Hand Speed: 30 ∘ / 60 min = 0.5 ∘ / min = 1 12 minute-space/min 30^\circ / 60\text{ min} = 0.5^\circ/\text{min} = \frac{1}{12}\text{ minute-space/min} 3 0 ∘ /60 min = 0. 5 ∘ / min = 12 1 ​ minute-space/min .

Relative Speed of Separation: Δ v = 6 ∘ − 0.5 ∘ = 5.5 ∘ / min = 11 12 minute-spaces/min \Delta v = 6^\circ - 0.5^\circ = 5.5^\circ/\text{min} = \frac{11}{12}\text{ minute-spaces/min} Δ v = 6 ∘ − 0. 5 ∘ = 5. 5 ∘ / min = 12 11 ​ minute-spaces/min

Time Formula: To gain an angular separation of S S S minute-spaces starting from hour H H H (where the hour hand is initially at 5 H 5H 5 H minute-spaces): m = 12 11 × ( net minute-spaces to be gained ) m = \frac{12}{11} \times (\text{net minute-spaces to be gained}) m = 11 12 ​ × ( net minute-spaces to be gained )

  • Step-by-Step Worked Problem Examples
  • Worked Example 1: Multi-Pipe Water Reservoir Filling

Problem: A water storage reservoir for a municipal distribution system has a capacity of 2 , 400 m 3 2,400\text{ m}^3 2 , 400 m 3 . Inlet Pipe A can fill the reservoir alone in 8 hours 8\text{ hours} 8 hours . Inlet Pipe B can fill it alone in 12 hours 12\text{ hours} 12 hours . An emergency drainage Pipe C can empty the full reservoir alone in 16 hours 16\text{ hours} 16 hours . At 6:00 AM, Pipe A and Pipe C are opened simultaneously. At 9:00 AM, Pipe B is also opened. At what exact clock time will the reservoir be completely filled?

Solution:

Establish individual hourly rates: R A = + 1 8 res/hr , R B = + 1 12 res/hr , R C = − 1 16 res/hr R_A = +\frac{1}{8}\text{ res/hr}, \quad R_B = +\frac{1}{12}\text{ res/hr}, \quad R_C = -\frac{1}{16}\text{ res/hr} R A ​ = + 8 1 ​ res/hr , R B ​ = + 12 1 ​ res/hr , R C ​ = − 16 1 ​ res/hr

Compute volume filled between 6:00 AM and 9:00 AM ( Δ t 1 = 3 hours \Delta t_1 = 3\text{ hours} Δ t 1 ​ = 3 hours ): R initial = R A + R C = 1 8 − 1 16 = 2 − 1 16 = 1 16 res/hr R_{\text{initial}} = R_A + R_C = \frac{1}{8} - \frac{1}{16} = \frac{2 - 1}{16} = \frac{1}{16}\text{ res/hr} R initial ​ = R A ​ + R C ​ = 8 1 ​ − 16 1 ​ = 16 2 − 1 ​ = 16 1 ​ res/hr Fraction filled = 1 16 × 3 = 3 16 \text{Fraction filled} = \frac{1}{16} \times 3 = \frac{3}{16} Fraction filled = 16 1 ​ × 3 = 16 3 ​

Determine remaining fraction to fill: Remaining fraction = 1 − 3 16 = 13 16 \text{Remaining fraction} = 1 - \frac{3}{16} = \frac{13}{16} Remaining fraction = 1 − 16 3 ​ = 16 13 ​

Compute combined net rate with all three pipes active from 9:00 AM onwards: R net = R A + R B + R C = 1 8 + 1 12 − 1 16 = 6 + 4 − 3 48 = 7 48 res/hr R_{\text{net}} = R_A + R_B + R_C = \frac{1}{8} + \frac{1}{12} - \frac{1}{16} = \frac{6 + 4 - 3}{48} = \frac{7}{48}\text{ res/hr} R net ​ = R A ​ + R B ​ + R C ​ = 8 1 ​ + 12 1 ​ − 16 1 ​ = 48 6 + 4 − 3 ​ = 48 7 ​ res/hr

Solve for remaining time t 2 t_2 t 2 ​ : t 2 = Remaining fraction R net = 13 / 16 7 / 48 = 13 16 × 48 7 = 39 7 hours = 5 4 7 hours t_2 = \frac{\text{Remaining fraction}}{R_{\text{net}}} = \frac{13/16}{7/48} = \frac{13}{16} \times \frac{48}{7} = \frac{39}{7}\text{ hours} = 5\frac{4}{7}\text{ hours} t 2 ​ = R net ​ Remaining fraction ​ = 7/48 13/16 ​ = 16 13 ​ × 7 48 ​ = 7 39 ​ hours = 5 7 4 ​ hours 5 hours + ( 4 7 × 60 ) minutes = 5 hours 34.29 minutes ≈ 5 hr 34 min 17 sec 5\text{ hours} + \left(\frac{4}{7} \times 60\right)\text{ minutes} = 5\text{ hours } 34.29\text{ minutes} \approx 5\text{ hr } 34\text{ min } 17\text{ sec} 5 hours + ( 7 4 ​ × 60 ) minutes = 5 hours 34.29 minutes ≈ 5 hr 34 min 17 sec

Add time elapsed to 9:00 AM: Clock time = 9:00 AM + 5 hr 34 min 17 sec = 2:34:17 PM \text{Clock time} = \text{9:00 AM} + 5\text{ hr } 34\text{ min } 17\text{ sec} = \text{2:34:17 PM} Clock time = 9:00 AM + 5 hr 34 min 17 sec = 2:34:17 PM

Worked Example 2: Clock Hands Perpendicularity

Problem: In how many minutes after 2:00 PM will the hands of a clock be perpendicular ( 90 ∘ 90^\circ 9 0 ∘ apart) for the first time?

Solution:

At 2:00 PM, the minute hand is at 12 (0 minute-spaces) and the hour hand is at 2 ( 2 × 5 = 10 minute-spaces 2 \times 5 = 10\text{ minute-spaces} 2 × 5 = 10 minute-spaces ).

For the hands to be perpendicular ( 90 ∘ 90^\circ 9 0 ∘ ), they must be separated by: Separation = 90 ∘ 6 ∘ / minute-space = 15 minute-spaces \text{Separation} = \frac{90^\circ}{6^\circ/\text{minute-space}} = 15\text{ minute-spaces} Separation = 6 ∘ / minute-space 9 0 ∘ ​ = 15 minute-spaces

For the first time after 2:00 PM, the minute hand must overtake the hour hand and pull 15 minute-spaces 15\text{ minute-spaces} 15 minute-spaces ahead of it (since initially it is only 10 spaces behind, it cannot be 15 spaces behind while remaining after 2:00 PM).

The total distance the minute hand must gain relative to the hour hand is: Distance to catch up + Lead required = 10 + 15 = 25 minute-spaces \text{Distance to catch up} + \text{Lead required} = 10 + 15 = 25\text{ minute-spaces} Distance to catch up + Lead required = 10 + 15 = 25 minute-spaces

Using the clock relative speed multiplier 12 11 \frac{12}{11} 11 12 ​ : m = 12 11 × 25 = 300 11 = 27 3 11 minutes ≈ 27.27 minutes m = \frac{12}{11} \times 25 = \frac{300}{11} = 27\frac{3}{11}\text{ minutes} \approx 27.27\text{ minutes} m = 11 12 ​ × 25 = 11 300 ​ = 27 11 3 ​ minutes ≈ 27.27 minutes

The hands will be perpendicular for the first time at 2:27:16 PM .

CELE Board Exam Traps & Strategic Checklists

Warning

Average Speed Fallacy: The most frequent trap in motion problems is averaging two speeds over equal distances using an arithmetic average ( v 1 + v 2 ) / 2 (v_1 + v_2)/2 ( v 1 ​ + v 2 ​ ) /2 . You must always use the harmonic average 2 v 1 v 2 v 1 + v 2 \frac{2 v_1 v_2}{v_1 + v_2} v 1 ​ + v 2 ​ 2 v 1 ​ v 2 ​ ​ .

Clock Problem Directionality: Pay close attention to whether the problem asks for the hands to be opposite each other ( 180 ∘ = 30 spaces 180^\circ = 30\text{ spaces} 18 0 ∘ = 30 spaces ), in a straight line ( 0 ∘ 0^\circ 0 ∘ or 180 ∘ 180^\circ 18 0 ∘ ), or perpendicular ( 90 ∘ = 15 spaces 90^\circ = 15\text{ spaces} 9 0 ∘ = 15 spaces ). Note whether it specifies the first or second occurrence.

Binomial Term Indexing: In binomial expansions ( a + b ) n (a + b)^n ( a + b ) n , the term index r r r starts at 0 0 0 . The k k k -th term has r = k − 1 r = k - 1 r = k − 1 . Forgetting this off-by-one index is the leading cause of incorrect exponent calculation.

Loading diagram... Progression Classification and Word Problem Modeling Workflow