Study guide
2.5 Series, Hyperbolic Functions, Multivariable Calculus, and Laplace Transforms
PRC Civil Engineer Licensure Examination CELE
Track your progress as you read
Finished sections get a check mark.
1 Chapter 1: Examination Overview, RA 544 & Professional Practice
1.1 CELE Structure, Format, Scoring, and 2026 Subject Order 1.2 Republic Act No. 544: The Civil Engineering Law and Board Regulations 1.3 Civil Engineering Ethics, Contracts, and Professional Practice
2 Chapter 2: Engineering Mathematics, Numerical Methods & Physics
2.1 Advanced Algebra, Progressions & Word Problems 2.2 Trigonometry and Analytical Geometry 2.3 Differential and Integral Calculus 2.4 Differential Equations and Numerical Methods 2.5 Series, Hyperbolic Functions, Multivariable Calculus, and Laplace Transforms 2.6 Numerical Methods: Linear Systems, Interpolation, Curve Fitting, and ODE Solvers 2.7 Physics for Engineers: Kinematics, Newton's Laws, Work-Energy, and Momentum
3 Chapter 3: Engineering Data Analysis & Engineering Economy
3.1 Engineering Data Analysis and Statistical Applications 3.2 Parameter Estimation, Linear Regression, Correlation, and Queuing Models 3.3 Engineering Economy: Time Value of Money and Interest Formulas 3.4 Project Evaluation, Depreciation, and Benefit-Cost Analysis
4 Chapter 4: Surveying Fundamentals, Construction Layout & Route Surveying
4.1 Errors, Corrections, and Pacing/Taping 4.2 Leveling, Earthworks, and Mass Haul Diagrams 4.3 Traverse Computations, Balancing, and Area Determinations 4.4 Route Surveying: Horizontal and Vertical Curves
5 Chapter 5: Highway & Transportation Engineering
5.1 Highway Geometric Design and Sight Distances 5.2 Traffic Engineering, Flow Fundamentals, and Pavement Design 5.3 Highway Policy, Route Location, Drainage, and Earthwork Slopes 5.4 Transportation Planning, Network Analysis, and Intermodal Systems
6 Chapter 6: Construction Materials, Methods, Management & Safety
6.1 Materials for Construction: Concrete, Formwork, Masonry, Steel, and Wood Products 6.2 Construction Equipment, Formwork, and Construction Methods 6.3 Construction Occupational Safety and Health: RA 11058 and DOLE DO 13 6.4 Construction Project Management, CPM/PERT, and Resource Scheduling 6.5 Construction Principles: Design Requirements, Project Organization, Cost Control, and Value Engineering 6.6 Quantity Surveying, Unit Cost Analysis, and Project Cost Estimates 6.7 Construction Trades and Specialties: Plumbing, Plastics, Doors and Windows, Finishes, and Electrical
7 Chapter 7: Fluid Properties, Hydrostatics & Buoyancy
7.1 Fluid Properties, Units, and Pressure Measurement 7.2 Hydrostatic Pressure on Plane and Curved Surfaces 7.3 Buoyancy, Flotation, and Accelerated Fluid Masses
8 Chapter 8: Hydrodynamics, Pipe Flow, Open Channels & Water Supply
8.1 Fluid Dynamics: Continuity and Energy Equations 8.2 Flow Measurement: Orifices, Weirs, and Venturi Meters 8.3 Fluid Flow in Pipes, Friction Losses, and Pipe Networks 8.4 Open Channel Flow, Manning's Equation, and Hydraulic Jump 8.5 Water Supply: Demand, Storage, Pumping, Distribution, and Treatment
9 Chapter 9: Soil Properties, Seepage & Stresses in Soil Mass
9.1 Soil Composition, Weight-Volume Phase Relationships 9.2 Soil Classification Systems (USCS & AASHTO) and Atterberg Limits 9.3 Soil Permeability, Seepage, Flow Nets, and Effective Stress 9.4 Stresses in Soil Mass, Stress Distribution, and Immediate and Secondary Settlement
10 Chapter 10: Consolidation, Soil Strength, Earth Pressures & Foundations
10.1 Soil Compaction and Soil Compressibility/Consolidation 10.2 Shear Strength of Soils and Mohr-Coulomb Failure Criteria 10.3 Lateral Earth Pressures (Rankine & Coulomb) and Retaining Walls 10.4 Shallow and Deep Foundation Bearing Capacity and Slope Stability
11 Chapter 11: Engineering Mechanics & Statics
11.1 Force Systems, Resultants, and Equilibrium of Rigid Bodies 11.2 Centroids, Moments of Inertia, and Friction 11.3 Cables, Trusses, and Internal Forces in Members
12 Chapter 12: Strength of Materials
12.1 Axial Stress, Strain, and Deformation 12.2 Torsion, Flanged Bolt Couplings, and Thin-Walled Pressure Vessels 12.3 Beam Stresses: Flexural and Transverse Shear 12.4 Beam Deflections, Combined Stresses, and Mohr's Circle
13 Chapter 13: Structural Analysis & NSCP Load Criteria
13.1 Indeterminate Structures: Approximate and Classical Methods 13.2 Moment Distribution Method and Slope Deflection 13.3 Influence Lines for Determinate and Indeterminate Structures 13.4 NSCP Minimum Design Loads: Dead, Live, Wind, and Earthquake
14 Chapter 14: Reinforced Concrete Design (NSCP 2015 / USD)
14.1 Ultimate Strength Design (USD) Principles and Singly Reinforced Beams 14.2 Doubly Reinforced Beams and T-Beams 14.3 Shear and Diagonal Tension, Stirrup Design, and Development Length 14.4 Reinforced Concrete Columns and Isolated Footing Design
15 Chapter 15: Steel, Timber & Prestressed Design and Materials Testing
15.1 Structural Steel Tension Members and Connections 15.2 Structural Steel Compression Members and Beam Design 15.3 Timber Design Principles, Working Stress, and Sawn Lumber Beams 15.4 Prestressed Concrete Fundamentals and Prestress Losses 15.5 Construction Materials Testing and Concrete Mix Proportioning
2.5 Series, Hyperbolic Functions, Multivariable Calculus, and Laplace Transforms
Key Takeaways Explain This Topic AI
The hyperbolic cosine cosh x = (eˣ + e⁻ˣ)/2 describes a hanging cable, and cosh²x − sinh²x = 1.
A power series converges where the ratio test limit |a_(n+1)/a_n| is less than 1, which defines its radius of convergence.
The total differential dz = (∂z/∂x)dx + (∂z/∂y)dy estimates the change or error in a computed quantity.
The Laplace transform turns a linear differential equation with initial conditions into an algebraic equation in s.
Work done pumping liquid out of a tank equals the integral of γ × (slice area) × (lift distance) over the liquid depth.
Last updated: October 2026
2.5 Series, Hyperbolic Functions, Multivariable Calculus, and Laplace Transforms
The 2022 AMSTHC table of specifications (TOS) gives Calculus and Differential Equations five competencies each, at one item per competency. Section 2.3 covers derivatives and single-variable integration, and Section 2.4 covers first-order and constant-coefficient equations. This section covers the remaining competencies:
- Plane curves and hyperbolic functions (Calculus 1.3)
- Infinite sequences, power series and infinite series (Calculus 1.4)
- Partial derivatives (Calculus 1.5)
- Integration for areas, volumes, force and work (Differential Equations 2.1)
- Systems of linear differential equations (Differential Equations 2.3)
- Double and triple integrals (Differential Equations 2.4)
- Laplace transforms (Differential Equations 2.5)
- Plane Curves and Curvature
A curve may be given as y = f ( x ) y = f(x) y = f ( x ) , parametrically as x = x ( t ) x = x(t) x = x ( t ) and y = y ( t ) y = y(t) y = y ( t ) , or in polar form as r = f ( θ ) r = f(\theta) r = f ( θ ) . Engineers most often need its slope, its arc length and its curvature.
- Quantity Cartesian y = f ( x ) y = f(x) y = f ( x ) Parametric
- Slope y ′ y' y ′ d y / d t d x / d t \dfrac{dy/dt}{dx/dt} d x / d t d y / d t
Arc length ∫ 1 + ( y ′ ) 2 d x \int \sqrt{1 + (y')^2}\,dx ∫ 1 + ( y ′ ) 2 d x ∫ x ˙ 2 + y ˙ 2 d t \int \sqrt{\dot{x}^2 + \dot{y}^2}\,dt ∫ x ˙ 2 + y ˙ 2 d t
Radius of curvature ρ = [ 1 + ( y ′ ) 2 ] 3 / 2 ∣ y ′ ′ ∣ \rho = \dfrac{[1 + (y')^2]^{3/2}}{\lvert y'' \rvert} ρ = ∣ y ′′ ∣ [ 1 + ( y ′ ) 2 ] 3/2 ρ = ( x ˙ 2 + y ˙ 2 ) 3 / 2 ∣ x ˙ y ¨ − y ˙ x ¨ ∣ \rho = \dfrac{(\dot{x}^2 + \dot{y}^2)^{3/2}}{\lvert \dot{x}\ddot{y} - \dot{y}\ddot{x} \rvert} ρ = ∣ x ˙ y ¨ − y ˙ x ¨ ∣ ( x ˙ 2 + y ˙ 2 ) 3/2
Example. For y = x 2 / 40 y = x^2/40 y = x 2 /40 at x = 10 x = 10 x = 10 : y ′ = 0.5 y' = 0.5 y ′ = 0.5 and y ′ ′ = 0.05 y'' = 0.05 y ′′ = 0.05 . Then ρ = ( 1.25 ) 1.5 / 0.05 = 27.95 \rho = (1.25)^{1.5}/0.05 = 27.95 ρ = ( 1.25 ) 1.5 /0.05 = 27.95 . This is the same idea as the radius of a parabolic vertical curve at a point.
Hyperbolic Functions
sinh x = e x − e − x 2 , cosh x = e x + e − x 2 , tanh x = sinh x cosh x \sinh x = \frac{e^x - e^{-x}}{2}, \qquad \cosh x = \frac{e^x + e^{-x}}{2}, \qquad \tanh x = \frac{\sinh x}{\cosh x} sinh x = 2 e x − e − x , cosh x = 2 e x + e − x , tanh x = c o s h x s i n h x
- Identity or derivative Result
- Fundamental identity cosh 2 x − sinh 2 x = 1 \cosh^2 x - \sinh^2 x = 1 cosh 2 x − sinh 2 x = 1
Double angle sinh 2 x = 2 sinh x cosh x \sinh 2x = 2\sinh x\cosh x sinh 2 x = 2 sinh x cosh x ; cosh 2 x = cosh 2 x + sinh 2 x \cosh 2x = \cosh^2 x + \sinh^2 x cosh 2 x = cosh 2 x + sinh 2 x
Derivatives d d x sinh x = cosh x \frac{d}{dx}\sinh x = \cosh x d x d sinh x = cosh x ; d d x cosh x = sinh x \frac{d}{dx}\cosh x = \sinh x d x d cosh x = sinh x ; d d x tanh x = sech 2 x \frac{d}{dx}\tanh x = \text{sech}^2 x d x d tanh x = sech 2 x
Inverse sinh − 1 x = ln ( x + x 2 + 1 ) \sinh^{-1} x = \ln\left(x + \sqrt{x^2 + 1}\right) sinh − 1 x = ln ( x + x 2 + 1 )
A cable hanging under its own weight takes the shape y = c cosh ( x / c ) y = c\cosh(x/c) y = c cosh ( x / c ) , which is why the catenary in Section 11.3 uses these functions. Example: cosh 1 = ( 2.71828 + 0.36788 ) / 2 = 1.5431 \cosh 1 = (2.71828 + 0.36788)/2 = 1.5431 cosh 1 = ( 2.71828 + 0.36788 ) /2 = 1.5431 .
Sequences, Infinite Series and Power Series
An infinite series ∑ a n \sum a_n ∑ a n converges if its partial sums approach a finite limit. For civil engineering problems, the key tests are:
Divergence test. If a n ↛ 0 a_n \not\to 0 a n → 0 , the series diverges.
Geometric series. ∑ a r n \sum a r^{n} ∑ a r n converges to a / ( 1 − r ) a/(1-r) a / ( 1 − r ) when ∣ r ∣ < 1 \lvert r \rvert < 1 ∣ r ∣ < 1 .
p-series. ∑ 1 / n p \sum 1/n^p ∑ 1/ n p converges only when p > 1 p > 1 p > 1 . The harmonic series ( p = 1 p = 1 p = 1 ) diverges.
Ratio test. If L = lim ∣ a n + 1 / a n ∣ < 1 L = \lim \lvert a_{n+1}/a_n \rvert < 1 L = lim ∣ a n + 1 / a n ∣ < 1 , the series converges; if L > 1 L > 1 L > 1 , it diverges.
A power series ∑ c n ( x − a ) n \sum c_n (x - a)^n ∑ c n ( x − a ) n converges within a radius of convergence R R R found from the ratio test. Taylor series about x = a x = a x = a (Maclaurin when a = 0 a = 0 a = 0 ):
f ( x ) = ∑ n = 0 ∞ f ( n ) ( a ) n ! ( x − a ) n f(x) = \sum_{n=0}^{\infty} \frac{f^{(n)}(a)}{n!}(x - a)^n f ( x ) = ∑ n = 0 ∞ n ! f ( n ) ( a ) ( x − a ) n
Function Maclaurin series Valid for
e x e^x e x 1 + x + x 2 2 ! + x 3 3 ! + ⋯ 1 + x + \frac{x^2}{2!} + \frac{x^3}{3!} + \cdots 1 + x + 2 ! x 2 + 3 ! x 3 + ⋯ all x x x
sin x \sin x sin x x − x 3 3 ! + x 5 5 ! − ⋯ x - \frac{x^3}{3!} + \frac{x^5}{5!} - \cdots x − 3 ! x 3 + 5 ! x 5 − ⋯ all x x x
cos x \cos x cos x 1 − x 2 2 ! + x 4 4 ! − ⋯ 1 - \frac{x^2}{2!} + \frac{x^4}{4!} - \cdots 1 − 2 ! x 2 + 4 ! x 4 − ⋯ all x x x
ln ( 1 + x ) \ln(1+x) ln ( 1 + x ) x − x 2 2 + x 3 3 − ⋯ x - \frac{x^2}{2} + \frac{x^3}{3} - \cdots x − 2 x 2 + 3 x 3 − ⋯ − 1 < x ≤ 1 -1 < x \le 1 − 1 < x ≤ 1
( 1 + x ) k (1+x)^k ( 1 + x ) k 1 + k x + k ( k − 1 ) 2 ! x 2 + ⋯ 1 + kx + \frac{k(k-1)}{2!}x^2 + \cdots 1 + k x + 2 ! k ( k − 1 ) x 2 + ⋯ ∣ x ∣ < 1 \lvert x \rvert < 1 ∣ x ∣ < 1
These series justify everyday engineering approximations, such as sin θ ≈ θ \sin\theta \approx \theta sin θ ≈ θ , cos θ ≈ 1 − θ 2 / 2 \cos\theta \approx 1 - \theta^2/2 cos θ ≈ 1 − θ 2 /2 , and the slope correction h 2 / ( 2 s ) h^2/(2s) h 2 / ( 2 s ) in taping.
Partial Derivatives and the Total Differential
For z = f ( x , y ) z = f(x, y) z = f ( x , y ) , the partial derivative ∂ z / ∂ x \partial z/\partial x ∂ z / ∂ x treats y y y as constant. The total differential estimates how z z z changes when both variables change slightly:
d z = ∂ z ∂ x d x + ∂ z ∂ y d y dz = \frac{\partial z}{\partial x}dx + \frac{\partial z}{\partial y}dy d z = ∂ x ∂ z d x + ∂ y ∂ z d y
Error example. A rectangular footing is measured as 2.00 ± 0.01 m 2.00 \pm 0.01\text{ m} 2.00 ± 0.01 m by 3.00 ± 0.01 m 3.00 \pm 0.01\text{ m} 3.00 ± 0.01 m . Area A = x y = 6.00 m 2 A = xy = 6.00\text{ m}^2 A = x y = 6.00 m 2 , and d A = y d x + x d y = 3 ( 0.01 ) + 2 ( 0.01 ) = 0.05 m 2 dA = y\,dx + x\,dy = 3(0.01) + 2(0.01) = 0.05\text{ m}^2 d A = y d x + x d y = 3 ( 0.01 ) + 2 ( 0.01 ) = 0.05 m 2 , or about 0.8 % 0.8\% 0.8% .
Second partials give curvature, and setting ∂ f / ∂ x = ∂ f / ∂ y = 0 \partial f/\partial x = \partial f/\partial y = 0 ∂ f / ∂ x = ∂ f / ∂ y = 0 locates critical points of a two-variable function. A critical point is a minimum when f x x > 0 f_{xx} > 0 f xx > 0 and f x x f y y − f x y 2 > 0 f_{xx}f_{yy} - f_{xy}^2 > 0 f xx f yy − f x y 2 > 0 .
Applications of Integration: Force and Work
Work by a variable force: W = ∫ a b F ( x ) d x W = \int_a^b F(x)\,dx W = ∫ a b F ( x ) d x . For a spring, W = 1 2 k ( x 2 2 − x 1 2 ) W = \frac{1}{2}k(x_2^2 - x_1^2) W = 2 1 k ( x 2 2 − x 1 2 ) .
Pumping liquid: a horizontal slice at depth y y y has weight γ A ( y ) d y \gamma A(y)\,dy γ A ( y ) d y and must be lifted a distance L ( y ) L(y) L ( y ) , so W = ∫ γ A ( y ) L ( y ) d y W = \int \gamma A(y) L(y)\,dy W = ∫ γ A ( y ) L ( y ) d y .
Hydrostatic force on a vertical plate: F = ∫ γ y w ( y ) d y F = \int \gamma\, y\, w(y)\,dy F = ∫ γ y w ( y ) d y , where w ( y ) w(y) w ( y ) is the plate width at depth y y y .
Example. A cylindrical tank 2 m 2\text{ m} 2 m in radius and 5 m 5\text{ m} 5 m deep is full of water. All of it is pumped over the rim. Each slice of thickness d y dy d y at depth y y y below the rim weighs 9.81 π ( 2 ) 2 d y 9.81\pi(2)^2\,dy 9.81 π ( 2 ) 2 d y kN and is lifted y y y meters:
W = ∫ 0 5 9.81 ( 4 π ) y d y = 9.81 ( 4 π ) 25 2 = 1,541 kJ W = \int_0^5 9.81(4\pi)\,y\,dy = 9.81(4\pi)\frac{25}{2} = 1{,}541\text{ kJ} W = ∫ 0 5 9.81 ( 4 π ) y d y = 9.81 ( 4 π ) 2 25 = 1 , 541 kJ
Double and Triple Integrals
A double integral ∬ R f ( x , y ) d A \iint_R f(x,y)\,dA ∬ R f ( x , y ) d A sums f f f over a plane region. With f = 1 f = 1 f = 1 it gives area; with f f f as a height it gives volume. Triple integrals ∭ f d V \iiint f\,dV ∭ f d V give volume, mass and moments of solids.
Example. The volume under z = 6 − x − 2 y z = 6 - x - 2y z = 6 − x − 2 y over the rectangle 0 ≤ x ≤ 2 0 \le x \le 2 0 ≤ x ≤ 2 , 0 ≤ y ≤ 1 0 \le y \le 1 0 ≤ y ≤ 1 :
V = ∫ 0 1 ∫ 0 2 ( 6 − x − 2 y ) d x d y = ∫ 0 1 ( 12 − 2 − 4 y ) d y = 10 − 2 = 8 V = \int_0^1 \int_0^2 (6 - x - 2y)\,dx\,dy = \int_0^1 (12 - 2 - 4y)\,dy = 10 - 2 = 8 V = ∫ 0 1 ∫ 0 2 ( 6 − x − 2 y ) d x d y = ∫ 0 1 ( 12 − 2 − 4 y ) d y = 10 − 2 = 8
In polar coordinates, d A = r d r d θ dA = r\,dr\,d\theta d A = r d r d θ . That form makes circular regions simple: the area of a circle is ∫ 0 2 π ∫ 0 R r d r d θ = π R 2 \int_0^{2\pi}\int_0^R r\,dr\,d\theta = \pi R^2 ∫ 0 2 π ∫ 0 R r d r d θ = π R 2 .
Systems of Linear Differential Equations
Coupled first-order equations such as x ′ = a x + b y x' = a x + b y x ′ = a x + b y and y ′ = c x + d y y' = c x + d y y ′ = c x + d y describe two interacting quantities. Examples are two connected tanks or two masses on springs. Write the system as X ′ = A X \mathbf{X}' = A\mathbf{X} X ′ = A X . For each eigenvalue λ \lambda λ of A A A with eigenvector v \mathbf{v} v , e λ t v e^{\lambda t}\mathbf{v} e λ t v is a solution, and the general solution is their combination.
Example. x ′ = y x' = y x ′ = y and y ′ = 4 x y' = 4x y ′ = 4 x . The eigenvalues satisfy λ 2 − 4 = 0 \lambda^2 - 4 = 0 λ 2 − 4 = 0 , so λ = ± 2 \lambda = \pm 2 λ = ± 2 . Hence x = C 1 e 2 t + C 2 e − 2 t x = C_1 e^{2t} + C_2 e^{-2t} x = C 1 e 2 t + C 2 e − 2 t , and y = x ′ = 2 C 1 e 2 t − 2 C 2 e − 2 t y = x' = 2C_1 e^{2t} - 2C_2 e^{-2t} y = x ′ = 2 C 1 e 2 t − 2 C 2 e − 2 t . Elimination gives the same result: differentiate the first equation to get x ′ ′ = 4 x x'' = 4x x ′′ = 4 x .
Laplace Transforms
L { f ( t ) } = F ( s ) = ∫ 0 ∞ e − s t f ( t ) d t \mathcal{L}\{f(t)\} = F(s) = \int_0^\infty e^{-st} f(t)\,dt L { f ( t )} = F ( s ) = ∫ 0 ∞ e − s t f ( t ) d t
- f ( t ) f(t) f ( t ) F ( s ) F(s) F ( s )
- 1 1 1 1 / s 1/s 1/ s
- t n t^n t n n ! / s n + 1 n!/s^{n+1} n ! / s n + 1
- e a t e^{at} e a t 1 / ( s − a ) 1/(s - a) 1/ ( s − a )
- sin b t \sin bt sin b t b / ( s 2 + b 2 ) b/(s^2 + b^2) b / ( s 2 + b 2 )
- cos b t \cos bt cos b t s / ( s 2 + b 2 ) s/(s^2 + b^2) s / ( s 2 + b 2 )
- f ′ ( t ) f'(t) f ′ ( t ) s F ( s ) − f ( 0 ) sF(s) - f(0) s F ( s ) − f ( 0 )
f ′ ′ ( t ) f''(t) f ′′ ( t ) s 2 F ( s ) − s f ( 0 ) − f ′ ( 0 ) s^2F(s) - sf(0) - f'(0) s 2 F ( s ) − s f ( 0 ) − f ′ ( 0 )
e a t f ( t ) e^{at}f(t) e a t f ( t ) (shift) F ( s − a ) F(s - a) F ( s − a )
Solving an initial-value problem. For y ′ + 2 y = 4 y' + 2y = 4 y ′ + 2 y = 4 with y ( 0 ) = 0 y(0) = 0 y ( 0 ) = 0 , transforming term by term gives s Y + 2 Y = 4 / s sY + 2Y = 4/s s Y + 2 Y = 4/ s . So Y = 4 s ( s + 2 ) = 2 s − 2 s + 2 Y = \dfrac{4}{s(s+2)} = \dfrac{2}{s} - \dfrac{2}{s+2} Y = s ( s + 2 ) 4 = s 2 − s + 2 2 by partial fractions, and the inverse transform is y = 2 − 2 e − 2 t y = 2 - 2e^{-2t} y = 2 − 2 e − 2 t .
Tip
On board problems, check a Laplace answer by substituting t = 0 t = 0 t = 0 (it must match the initial condition) and t → ∞ t \to \infty t → ∞ (final-value behavior).