Study guide
11.1 Force Systems, Resultants, and Equilibrium of Rigid Bodies
PRC Civil Engineer Licensure Examination CELE
Track your progress as you read
Finished sections get a check mark.
1 Chapter 1: Examination Overview, RA 544 & Professional Practice
1.1 CELE Structure, Format, Scoring, and 2026 Subject Order 1.2 Republic Act No. 544: The Civil Engineering Law and Board Regulations 1.3 Civil Engineering Ethics, Contracts, and Professional Practice
2 Chapter 2: Engineering Mathematics, Numerical Methods & Physics
2.1 Advanced Algebra, Progressions & Word Problems 2.2 Trigonometry and Analytical Geometry 2.3 Differential and Integral Calculus 2.4 Differential Equations and Numerical Methods 2.5 Series, Hyperbolic Functions, Multivariable Calculus, and Laplace Transforms 2.6 Numerical Methods: Linear Systems, Interpolation, Curve Fitting, and ODE Solvers 2.7 Physics for Engineers: Kinematics, Newton's Laws, Work-Energy, and Momentum
3 Chapter 3: Engineering Data Analysis & Engineering Economy
3.1 Engineering Data Analysis and Statistical Applications 3.2 Parameter Estimation, Linear Regression, Correlation, and Queuing Models 3.3 Engineering Economy: Time Value of Money and Interest Formulas 3.4 Project Evaluation, Depreciation, and Benefit-Cost Analysis
4 Chapter 4: Surveying Fundamentals, Construction Layout & Route Surveying
4.1 Errors, Corrections, and Pacing/Taping 4.2 Leveling, Earthworks, and Mass Haul Diagrams 4.3 Traverse Computations, Balancing, and Area Determinations 4.4 Route Surveying: Horizontal and Vertical Curves
5 Chapter 5: Highway & Transportation Engineering
5.1 Highway Geometric Design and Sight Distances 5.2 Traffic Engineering, Flow Fundamentals, and Pavement Design 5.3 Highway Policy, Route Location, Drainage, and Earthwork Slopes 5.4 Transportation Planning, Network Analysis, and Intermodal Systems
6 Chapter 6: Construction Materials, Methods, Management & Safety
6.1 Materials for Construction: Concrete, Formwork, Masonry, Steel, and Wood Products 6.2 Construction Equipment, Formwork, and Construction Methods 6.3 Construction Occupational Safety and Health: RA 11058 and DOLE DO 13 6.4 Construction Project Management, CPM/PERT, and Resource Scheduling 6.5 Construction Principles: Design Requirements, Project Organization, Cost Control, and Value Engineering 6.6 Quantity Surveying, Unit Cost Analysis, and Project Cost Estimates 6.7 Construction Trades and Specialties: Plumbing, Plastics, Doors and Windows, Finishes, and Electrical
7 Chapter 7: Fluid Properties, Hydrostatics & Buoyancy
7.1 Fluid Properties, Units, and Pressure Measurement 7.2 Hydrostatic Pressure on Plane and Curved Surfaces 7.3 Buoyancy, Flotation, and Accelerated Fluid Masses
8 Chapter 8: Hydrodynamics, Pipe Flow, Open Channels & Water Supply
8.1 Fluid Dynamics: Continuity and Energy Equations 8.2 Flow Measurement: Orifices, Weirs, and Venturi Meters 8.3 Fluid Flow in Pipes, Friction Losses, and Pipe Networks 8.4 Open Channel Flow, Manning's Equation, and Hydraulic Jump 8.5 Water Supply: Demand, Storage, Pumping, Distribution, and Treatment
9 Chapter 9: Soil Properties, Seepage & Stresses in Soil Mass
9.1 Soil Composition, Weight-Volume Phase Relationships 9.2 Soil Classification Systems (USCS & AASHTO) and Atterberg Limits 9.3 Soil Permeability, Seepage, Flow Nets, and Effective Stress 9.4 Stresses in Soil Mass, Stress Distribution, and Immediate and Secondary Settlement
10 Chapter 10: Consolidation, Soil Strength, Earth Pressures & Foundations
10.1 Soil Compaction and Soil Compressibility/Consolidation 10.2 Shear Strength of Soils and Mohr-Coulomb Failure Criteria 10.3 Lateral Earth Pressures (Rankine & Coulomb) and Retaining Walls 10.4 Shallow and Deep Foundation Bearing Capacity and Slope Stability
11 Chapter 11: Engineering Mechanics & Statics
11.1 Force Systems, Resultants, and Equilibrium of Rigid Bodies 11.2 Centroids, Moments of Inertia, and Friction 11.3 Cables, Trusses, and Internal Forces in Members
12 Chapter 12: Strength of Materials
12.1 Axial Stress, Strain, and Deformation 12.2 Torsion, Flanged Bolt Couplings, and Thin-Walled Pressure Vessels 12.3 Beam Stresses: Flexural and Transverse Shear 12.4 Beam Deflections, Combined Stresses, and Mohr's Circle
13 Chapter 13: Structural Analysis & NSCP Load Criteria
13.1 Indeterminate Structures: Approximate and Classical Methods 13.2 Moment Distribution Method and Slope Deflection 13.3 Influence Lines for Determinate and Indeterminate Structures 13.4 NSCP Minimum Design Loads: Dead, Live, Wind, and Earthquake
14 Chapter 14: Reinforced Concrete Design (NSCP 2015 / USD)
14.1 Ultimate Strength Design (USD) Principles and Singly Reinforced Beams 14.2 Doubly Reinforced Beams and T-Beams 14.3 Shear and Diagonal Tension, Stirrup Design, and Development Length 14.4 Reinforced Concrete Columns and Isolated Footing Design
15 Chapter 15: Steel, Timber & Prestressed Design and Materials Testing
15.1 Structural Steel Tension Members and Connections 15.2 Structural Steel Compression Members and Beam Design 15.3 Timber Design Principles, Working Stress, and Sawn Lumber Beams 15.4 Prestressed Concrete Fundamentals and Prestress Losses 15.5 Construction Materials Testing and Concrete Mix Proportioning
11.1 Force Systems, Resultants, and Equilibrium of Rigid Bodies
Key Takeaways Explain This Topic AI
A force system can be classified as concurrent, coplanar, parallel, or spatial; any general system of forces can be reduced to an equivalent single resultant force acting at a specific point plus a resultant couple moment.
Varignon's Theorem states that the moment of a force about any axis or point equals the algebraic sum of the moments of its components about that same point (scalar M = F d or vector M_O = r × F).
A couple is composed of two equal, opposite, and non-collinear parallel forces; its moment is a free vector that exerts an identical rotational effect about every point in space.
Equilibrium of a coplanar rigid body requires three independent scalar conditions (ΣFx = 0, ΣFy = 0, ΣM = 0), whereas a 3D rigid body requires six independent conditions (ΣFx = ΣFy = ΣFz = 0 and ΣMx = ΣMy = ΣMz = 0).
Two-force members carry purely collinear equal-and-opposite axial forces along their pinning axis; three-force members in static equilibrium must have lines of action that are either mutually concurrent or mutually parallel.
Last updated: October 2026
11.1 Force Systems, Resultants, and Equilibrium of Rigid Bodies
Engineering mechanics forms the analytical bedrock of structural and civil engineering. Statics specifically investigates the equilibrium of bodies subjected to balanced systems of forces and moments where acceleration is identically zero. In Philippine Civil Engineering Licensure Examination (CELE) practice, mastery of force decomposition, line of action reductions, equivalent force-couple systems, and rigid body support reactions is essential for structural analysis, foundation design, and construction staging.
Classification of Force Systems
A force represents the mechanical interaction between bodies, characterized completely by its magnitude , direction (line of action and sense), and point of application (a sliding vector according to the Principle of Transmissibility for rigid bodies).
Forces are categorized based on their geometric lines of action relative to coordinate planes:
Force System Type Spatial Orientation of Lines of Action Equilibrium Equations Available Degrees of Freedom Constrained
Concurrent Coplanar Intersect at a single point in a single 2D plane 2 ( ∑ F x = 0 , ∑ F y = 0 \sum F_x = 0, \sum F_y = 0 ∑ F x = 0 , ∑ F y = 0 ) 2 translations ( x , y x, y x , y )
Parallel Coplanar Lines of action are parallel in a single 2D plane 2 ( ∑ F y = 0 , ∑ M O = 0 \sum F_y = 0, \sum M_O = 0 ∑ F y = 0 , ∑ M O = 0 ) 1 translation, 1 in-plane rotation
General Coplanar (Non-Concurrent, Non-Parallel) Lie in the same 2D plane with arbitrary lines of action 3 ( ∑ F x = 0 , ∑ F y = 0 , ∑ M O = 0 \sum F_x = 0, \sum F_y = 0, \sum M_O = 0 ∑ F x = 0 , ∑ F y = 0 , ∑ M O = 0 ) 2 translations, 1 in-plane rotation
Concurrent Spatial (3D) Intersect at a single point in three-dimensional space 3 ( ∑ F x = 0 , ∑ F y = 0 , ∑ F z = 0 \sum F_x = 0, \sum F_y = 0, \sum F_z = 0 ∑ F x = 0 , ∑ F y = 0 , ∑ F z = 0 ) 3 translations ( x , y , z x, y, z x , y , z )
Parallel Spatial (3D) Lines of action parallel to a single spatial axis (e.g., z z z ) 3 ( ∑ F z = 0 , ∑ M x = 0 , ∑ M y = 0 \sum F_z = 0, \sum M_x = 0, \sum M_y = 0 ∑ F z = 0 , ∑ M x = 0 , ∑ M y = 0 ) 1 translation, 2 out-of-plane rotations
General Spatial (3D) Arbitrary orientations throughout three-dimensional space 6 ( ∑ F x = ∑ F y = ∑ F z = 0 , ∑ M x = ∑ M y = ∑ M z = 0 \sum F_x = \sum F_y = \sum F_z = 0, \sum M_x = \sum M_y = \sum M_z = 0 ∑ F x = ∑ F y = ∑ F z = 0 , ∑ M x = ∑ M y = ∑ M z = 0 ) 3 translations, 3 rotations (Full 6 DOF)
- Vector Decomposition in 2D and 3D
- Two-Dimensional Vector Resolution
In Cartesian 2D coordinates, a force F ⃗ \vec{F} F inclined at counterclockwise angle θ \theta θ from the positive x x x -axis resolves into orthogonal scalar components: F x = F cos θ , F y = F sin θ F_x = F \cos \theta, \quad F_y = F \sin \theta F x = F cos θ , F y = F sin θ F = ∣ F ⃗ ∣ = F x 2 + F y 2 , θ = arctan ( F y F x ) F = |\vec{F}| = \sqrt{F_x^2 + F_y^2}, \quad \theta = \arctan\left(\frac{F_y}{F_x}\right) F = ∣ F ∣ = F x 2 + F y 2 , θ = arctan ( F x F y ) When defined by a geometric slope triangle with horizontal run a a a , vertical rise b b b , and hypotenuse c = a 2 + b 2 c = \sqrt{a^2 + b^2} c = a 2 + b 2 : F x = F ( a c ) , F y = F ( b c ) F_x = F \left(\frac{a}{c}\right), \quad F_y = F \left(\frac{b}{c}\right) F x = F ( c a ) , F y = F ( c b )
Three-Dimensional Vector Resolution & Unit Vectors
In three-dimensional space, a force F ⃗ \vec{F} F is defined either by its coordinate direction angles ( α , β , γ \alpha, \beta, \gamma α , β , γ ) measured from the positive x x x , y y y , and z z z axes, or by a position vector connecting two points along its line of action: cos 2 α + cos 2 β + cos 2 γ = 1 \cos^2 \alpha + \cos^2 \beta + \cos^2 \gamma = 1 cos 2 α + cos 2 β + cos 2 γ = 1 F ⃗ = F x i ^ + F y j ^ + F z k ^ = F ( cos α i ^ + cos β j ^ + cos γ k ^ ) \vec{F} = F_x \hat{i} + F_y \hat{j} + F_z \hat{k} = F (\cos \alpha \hat{i} + \cos \beta \hat{j} + \cos \gamma \hat{k}) F = F x i ^ + F y j ^ + F z k ^ = F ( cos α i ^ + cos β j ^ + cos γ k ^ )
If the force acts along a directed line segment from point A ( x A , y A , z A ) A(x_A, y_A, z_A) A ( x A , y A , z A ) toward point B ( x B , y B , z B ) B(x_B, y_B, z_B) B ( x B , y B , z B ) , define the displacement position vector r ⃗ A B \vec{r}_{AB} r A B and its corresponding unit direction vector λ ⃗ A B \vec{\lambda}_{AB} λ A B : r ⃗ A B = ( x B − x A ) i ^ + ( y B − y A ) j ^ + ( z B − z A ) k ^ \vec{r}_{AB} = (x_B - x_A)\hat{i} + (y_B - y_A)\hat{j} + (z_B - z_A)\hat{k} r A B = ( x B − x A ) i ^ + ( y B − y A ) j ^ + ( z B − z A ) k ^ ∣ r ⃗ A B ∣ = d A B = ( x B − x A ) 2 + ( y B − y A ) 2 + ( z B − z A ) 2 |\vec{r}_{AB}| = d_{AB} = \sqrt{(x_B - x_A)^2 + (y_B - y_A)^2 + (z_B - z_A)^2} ∣ r A B ∣ = d A B = ( x B − x A ) 2 + ( y B − y A ) 2 + ( z B − z A ) 2 λ ⃗ A B = r ⃗ A B ∣ r ⃗ A B ∣ = Δ x d A B i ^ + Δ y d A B j ^ + Δ z d A B k ^ \vec{\lambda}_{AB} = \frac{\vec{r}_{AB}}{|\vec{r}_{AB}|} = \frac{\Delta x}{d_{AB}}\hat{i} + \frac{\Delta y}{d_{AB}}\hat{j} + \frac{\Delta z}{d_{AB}}\hat{k} λ A B = ∣ r A B ∣ r A B = d A B Δ x i ^ + d A B Δ y j ^ + d A B Δ z k ^ F ⃗ = F λ ⃗ A B = F ( Δ x d A B i ^ + Δ y d A B j ^ + Δ z d A B k ^ ) \vec{F} = F \vec{\lambda}_{AB} = F \left( \frac{\Delta x}{d_{AB}}\hat{i} + \frac{\Delta y}{d_{AB}}\hat{j} + \frac{\Delta z}{d_{AB}}\hat{k} \right) F = F λ A B = F ( d A B Δ x i ^ + d A B Δ y j ^ + d A B Δ z k ^ )
Moments of Forces: Scalar and Vector Formulations
The moment of a force measures its tendency to cause rotational motion about a specific pivot point or axis.
Scalar Formulation & Varignon's Theorem
In coplanar systems, the moment magnitude of a force F ⃗ \vec{F} F about pivot point O O O is defined by: M O = F ⋅ d M_O = F \cdot d M O = F ⋅ d Where d d d is the perpendicular moment arm (shortest distance) from point O O O to the line of action of F ⃗ \vec{F} F . By standard engineering sign convention, counterclockwise (CCW) moments are positive (+) , and clockwise (CW) moments are negative (-) .
Varignon's Theorem (Principle of Moments):
The moment of any force about a point is equal to the algebraic sum of the moments of its resolved components about that same point.
For a 2D force F ⃗ = F x i ^ + F y j ^ \vec{F} = F_x \hat{i} + F_y \hat{j} F = F x i ^ + F y j ^ applied at coordinates ( x , y ) (x, y) ( x , y ) relative to moment center O ( 0 , 0 ) O(0, 0) O ( 0 , 0 ) : M O = x F y − y F x M_O = x F_y - y F_x M O = x F y − y F x This eliminates the need to calculate cumbersome perpendicular slant distances d d d .
Vector Formulation: Cross Product
In three dimensions, the moment vector M ⃗ O \vec{M}_O M O about reference point O O O is the vector cross product of position vector r ⃗ \vec{r} r and force vector F ⃗ \vec{F} F : M ⃗ O = r ⃗ × F ⃗ = det [ i ^ j ^ k ^ r x r y r z F x F y F z ] \vec{M}_O = \vec{r} \times \vec{F} = \det \begin{bmatrix} \hat{i} & \hat{j} & \hat{k} \\ r_x & r_y & r_z \\ F_x & F_y & F_z \end{bmatrix} M O = r × F = det i ^ r x F x j ^ r y F y k ^ r z F z M ⃗ O = ( r y F z − r z F y ) i ^ − ( r x F z − r z F x ) j ^ + ( r x F y − r y F x ) k ^ \vec{M}_O = (r_y F_z - r_z F_y)\hat{i} - (r_x F_z - r_z F_x)\hat{j} + (r_x F_y - r_y F_x)\hat{k} M O = ( r y F z − r z F y ) i ^ − ( r x F z − r z F x ) j ^ + ( r x F y − r y F x ) k ^
Important
The position vector r ⃗ \vec{r} r must always be drawn from the moment center O O O to ANY point located on the line of action of force F ⃗ \vec{F} F . Reversing the cross product order creates a sign error: r ⃗ × F ⃗ = − ( F ⃗ × r ⃗ ) \vec{r} \times \vec{F} = -(\vec{F} \times \vec{r}) r × F = − ( F × r ) .
Moment of a Force About an Arbitrary Axis
To determine the rotational effect of a force about a specific spatial axis a − a a-a a − a defined by unit vector u ⃗ a \vec{u}_a u a passing through point O O O , evaluate the scalar triple product (box product) : M a = u ⃗ a ⋅ ( r ⃗ × F ⃗ ) = det [ u a x u a y u a z r x r y r z F x F y F z ] M_a = \vec{u}_a \cdot (\vec{r} \times \vec{F}) = \det \begin{bmatrix} u_{ax} & u_{ay} & u_{az} \\ r_x & r_y & r_z \\ F_x & F_y & F_z \end{bmatrix} M a = u a ⋅ ( r × F ) = det u a x r x F x u a y r y F y u a z r z F z The vector moment acting directly along axis a − a a-a a − a is: M ⃗ a = M a u ⃗ a \vec{M}_a = M_a \vec{u}_a M a = M a u a
Couples and Equivalent Force-Couple Systems
A couple consists of two parallel forces having equal magnitudes F F F , opposite directions, and separated by a perpendicular distance d d d .
Properties of a Couple
Zero Net Transverse Force: ∑ F ⃗ = F ⃗ + ( − F ⃗ ) = 0 ⃗ \sum \vec{F} = \vec{F} + (-\vec{F}) = \vec{0} ∑ F = F + ( − F ) = 0 . A couple causes pure rotation without translation.
Free Vector Nature: The moment M ⃗ C = r ⃗ × F ⃗ \vec{M}_C = \vec{r} \times \vec{F} M C = r × F produced by a couple is completely independent of the choice of reference origin. It exerts an identical moment magnitude M C = F d M_C = F d M C = F d about every point in the rigid body.
Couples can be shifted anywhere on a rigid body or combined vectorially ( M ⃗ R = ∑ M ⃗ C \vec{M}_{R} = \sum \vec{M}_C M R = ∑ M C ) without altering external equilibrium.
Reduction to a Single Resultant Force
Any system of coplanar forces and moments acting on a rigid body can be reduced to an equivalent single resultant force R ⃗ \vec{R} R located at a unique perpendicular distance d ˉ \bar{d} d ˉ from a chosen reference point O O O : R ⃗ = ∑ F ⃗ = ( ∑ F x ) i ^ + ( ∑ F y ) j ^ \vec{R} = \sum \vec{F} = (\sum F_x)\hat{i} + (\sum F_y)\hat{j} R = ∑ F = ( ∑ F x ) i ^ + ( ∑ F y ) j ^ R = ( ∑ F x ) 2 + ( ∑ F y ) 2 , θ R = arctan ( ∑ F y ∑ F x ) R = \sqrt{(\sum F_x)^2 + (\sum F_y)^2}, \quad \theta_R = \arctan\left( \frac{\sum F_y}{\sum F_x} \right) R = ( ∑ F x ) 2 + ( ∑ F y ) 2 , θ R = arctan ( ∑ F x ∑ F y ) M R , O = ∑ M O M_{R,O} = \sum M_O M R , O = ∑ M O d ˉ = ∣ M R , O ∣ R \bar{d} = \frac{|M_{R,O}|}{R} d ˉ = R ∣ M R , O ∣ The line of action of R ⃗ \vec{R} R intersects the Cartesian axes at: x ˉ = M R , O R y ( along y = 0 ) , y ˉ = − M R , O R x ( along x = 0 ) \bar{x} = \frac{M_{R,O}}{R_y} \quad (\text{along } y = 0), \qquad \bar{y} = -\frac{M_{R,O}}{R_x} \quad (\text{along } x = 0) x ˉ = R y M R , O ( along y = 0 ) , y ˉ = − R x M R , O ( along x = 0 )
Conditions of Static Equilibrium
A rigid body is in static equilibrium if and only if both resultant linear force and resultant angular moment vanish: ∑ F ⃗ = 0 ⃗ and ∑ M ⃗ O = 0 ⃗ \sum \vec{F} = \vec{0} \quad \text{and} \quad \sum \vec{M}_O = \vec{0} ∑ F = 0 and ∑ M O = 0
Two-Dimensional (Coplanar) Equilibrium Equations
For coplanar loading in the x y xy x y -plane, three independent scalar equations govern: ∑ F x = 0 , ∑ F y = 0 , ∑ M O = 0 \sum F_x = 0, \quad \sum F_y = 0, \quad \sum M_O = 0 ∑ F x = 0 , ∑ F y = 0 , ∑ M O = 0 Alternatively, two moment equations and one force equation may be used: ∑ M A = 0 , ∑ M B = 0 , ∑ F x = 0 \sum M_A = 0, \quad \sum M_B = 0, \quad \sum F_x = 0 ∑ M A = 0 , ∑ M B = 0 , ∑ F x = 0 (provided the line connecting points A A A and B B B is not perpendicular to the x x x -axis) , or three moment equations: ∑ M A = 0 , ∑ M B = 0 , ∑ M C = 0 \sum M_A = 0, \sum M_B = 0, \sum M_C = 0 ∑ M A = 0 , ∑ M B = 0 , ∑ M C = 0 (provided points A , B , C A, B, C A , B , C are non-collinear) .
Three-Dimensional (Spatial) Equilibrium Equations
For arbitrary spatial loading, six independent scalar equations must be satisfied simultaneously: ∑ F x = 0 , ∑ F y = 0 , ∑ F z = 0 \sum F_x = 0, \quad \sum F_y = 0, \quad \sum F_z = 0 ∑ F x = 0 , ∑ F y = 0 , ∑ F z = 0 ∑ M x = 0 , ∑ M y = 0 , ∑ M z = 0 \sum M_x = 0, \quad \sum M_y = 0, \quad \sum M_z = 0 ∑ M x = 0 , ∑ M y = 0 , ∑ M z = 0
Support Constraints and Free-Body Diagrams (FBD)
A Free-Body Diagram (FBD) isolates the structural element from its surroundings, depicting all applied active loads, self-weight, and reactive forces/moments exerted by supports.
Common Structural Support Connections (2D)
Support Type Diagram Symbol Reactive Unknowns Physical Constraint Description
Roller / Rocker / Smooth Surface Circle or rocker on plane 1 unknown ( R y R_y R y normal to surface) Prevents translation normal to contact surface; free to translate tangentially and rotate
Short Link / Flexible Cable Pin-ended bar or cable 1 unknown ( T T T along member axis) Axial tension (cable) or tension/compression (rigid link)
Smooth Pin / Hinge Triangle pin or clevis 2 unknowns ( R x , R y R_x, R_y R x , R y orthogonal forces) Prevents translation in all plane directions; free to rotate
Fixed (Built-in / Clamped) Solid embedded wall 3 unknowns ( R x , R y R_x, R_y R x , R y forces, plus reaction moment M R M_R M R ) Completely prevents horizontal translation, vertical translation, and rotation Roller Support Hinged / Pin Support Fixed Support
- | | |
- ===== ===== | |=====
- (O) / \ | |
- ------ ----- | |=====
- 1 Reaction 2 Reactions 3 Reactions
- (Normal) (Rx, Ry) (Rx, Ry, M)
- Two-Force and Three-Force Members
Recognizing special member geometries dramatically simplifies rigid-body equilibrium calculations:
Two-Force Member: A structural member subjected to loads at only two discrete pin points, with no intermediate transverse forces, distributed weights, or applied moments. For static equilibrium, the two pin forces must be equal in magnitude, opposite in direction, and collinear (directed along the straight line connecting the two pins). Truss members and hydraulic cylinders are classic examples.
Three-Force Member: A rigid body subjected to forces at only three points. For equilibrium, the lines of action of the three forces must either intersect at a single concurrent point or be mutually parallel . If two non-parallel forces intersect at point P P P , the line of action of the third force must also pass through P P P .
Static Determinacy and Geometric Stability
For a single rigid body constrained in a 2D plane with r r r independent reaction components:
r < 3 r < 3 r < 3 : Statically Unstable / Partially Constrained. The body lacks sufficient external restraints to prevent rigid-body motion under general loading.
r = 3 r = 3 r = 3 : Statically Determinate (provided reactions are not geometrically unstable). All support unknowns can be solved directly using the three equations of statics.
r > 3 r > 3 r > 3 : Statically Indeterminate. The degree of external indeterminacy is i e = r − 3 i_e = r - 3 i e = r − 3 . Compatibility of deformations and material elasticity are required.
Geometric Instability Traps
Even if a body has r = 3 r = 3 r = 3 reaction forces, it will fail if the constraints are arranged improperly:
Concurrent Reactions: If the lines of action of all three reactions intersect at a common point O O O , the system cannot resist any external moment applied about O O O ( ∑ M O ≠ 0 \sum M_O \neq 0 ∑ M O = 0 ). The body rotates freely.
Parallel Reactions: If all three reactions are parallel (e.g., three vertical rollers), the system cannot resist any transverse lateral load ( ∑ F x ≠ 0 \sum F_x \neq 0 ∑ F x = 0 ). The body translates unrestrained.
- Step-by-Step Worked Problem Example
- Problem Statement
A horizontal structural beam A B AB A B has a total span of L = 8.0 m L = 8.0\text{ m} L = 8.0 m . It is supported by a smooth pin at A ( 0 , 0 ) A(0, 0) A ( 0 , 0 ) and a roller on a flat horizontal plane at B ( 8 , 0 ) B(8, 0) B ( 8 , 0 ) . The beam is subjected to three distinct applied loads:
A concentrated inclined force P = 50.0 kN P = 50.0\text{ kN} P = 50.0 kN applied at C C C ( x = 2.0 m x = 2.0\text{ m} x = 2.0 m from A A A ), acting downward and to the right at an angle of 60 ∘ 60^\circ 6 0 ∘ below the horizontal.
A uniformly distributed vertical gravity load w = 12.0 kN/m w = 12.0\text{ kN/m} w = 12.0 kN/m acting over the right half of the beam from x = 4.0 m x = 4.0\text{ m} x = 4.0 m to x = 8.0 m x = 8.0\text{ m} x = 8.0 m .
A concentrated counterclockwise couple moment M 0 = 30.0 kN ⋅ m M_0 = 30.0\text{ kN}\cdot\text{m} M 0 = 30.0 kN ⋅ m applied at x = 5.0 m x = 5.0\text{ m} x = 5.0 m .
Required:
Determine the horizontal and vertical support reactions at A A A ( A x , A y A_x, A_y A x , A y ) and the vertical reaction at B B B ( B y B_y B y ).
Compute the resultant reaction magnitude and direction at pin A A A .
Find the location x R x_R x R where the single resultant of all applied external loads intersects the beam axis from support A A A . P = 50 kN (60°)
- \ M0 = 30 kN-m (CCW)
- \ |
- v w = 12 kN/m [========]
- A =====C=========|=========*==========B
- ^ 2m 4m 5m 8m
- (Pin) (Roller)
- Solution Steps
Step 1: Resolve the Inclined Force into Components P x = P cos 60 ∘ = 50.0 × 0.500 = 25.0 kN ( → ) P_x = P \cos 60^\circ = 50.0 \times 0.500 = 25.0\text{ kN} \quad (\to) P x = P cos 6 0 ∘ = 50.0 × 0.500 = 25.0 kN ( → ) P y = P sin 60 ∘ = 50.0 × 0.866025 = 43.301 kN ( ↓ ) P_y = P \sin 60^\circ = 50.0 \times 0.866025 = 43.301\text{ kN} \quad (\downarrow) P y = P sin 6 0 ∘ = 50.0 × 0.866025 = 43.301 kN ( ↓ )
Step 2: Equivalent Resultant of the Distributed Load The distributed load acts over a length L w = 8.0 − 4.0 = 4.0 m L_w = 8.0 - 4.0 = 4.0\text{ m} L w = 8.0 − 4.0 = 4.0 m : W = w × L w = 12.0 kN/m × 4.0 m = 48.0 kN ( ↓ ) W = w \times L_w = 12.0\text{ kN/m} \times 4.0\text{ m} = 48.0\text{ kN} \quad (\downarrow) W = w × L w = 12.0 kN/m × 4.0 m = 48.0 kN ( ↓ ) The line of action of W W W passes through the centroid of the rectangular loading diagram: x ˉ w = 4.0 + 4.0 2 = 6.0 m from A \bar{x}_w = 4.0 + \frac{4.0}{2} = 6.0\text{ m from } A x ˉ w = 4.0 + 2 4.0 = 6.0 m from A
Step 3: Calculate Support Reaction at Roller B B B Take the algebraic sum of moments about pin A A A , setting counterclockwise (CCW) as positive ( + M +M + M ): ∑ M A = 0 \sum M_A = 0 ∑ M A = 0 − ( P y × 2.0 ) − ( W × 6.0 ) + M 0 + ( B y × 8.0 ) = 0 -(P_y \times 2.0) - (W \times 6.0) + M_0 + (B_y \times 8.0) = 0 − ( P y × 2.0 ) − ( W × 6.0 ) + M 0 + ( B y × 8.0 ) = 0 − ( 43.301 × 2.0 ) − ( 48.0 × 6.0 ) + 30.0 + 8.0 B y = 0 -(43.301 \times 2.0) - (48.0 \times 6.0) + 30.0 + 8.0 B_y = 0 − ( 43.301 × 2.0 ) − ( 48.0 × 6.0 ) + 30.0 + 8.0 B y = 0 − 86.602 − 288.0 + 30.0 + 8.0 B y = 0 -86.602 - 288.0 + 30.0 + 8.0 B_y = 0 − 86.602 − 288.0 + 30.0 + 8.0 B y = 0 − 344.602 + 8.0 B y = 0 -344.602 + 8.0 B_y = 0 − 344.602 + 8.0 B y = 0 B y = 344.602 8.0 = 43.075 kN ≈ 43.08 kN ( ↑ ) B_y = \frac{344.602}{8.0} = 43.075\text{ kN} \approx 43.08\text{ kN} \quad (\uparrow) B y = 8.0 344.602 = 43.075 kN ≈ 43.08 kN ( ↑ )
Step 4: Calculate Support Reactions at Pin A A A Apply horizontal equilibrium: ∑ F x = 0 ⟹ A x + P x = 0 ⟹ A x + 25.0 = 0 \sum F_x = 0 \implies A_x + P_x = 0 \implies A_x + 25.0 = 0 ∑ F x = 0 ⟹ A x + P x = 0 ⟹ A x + 25.0 = 0 A x = − 25.0 kN = 25.0 kN ( ← ) A_x = -25.0\text{ kN} = 25.0\text{ kN} \quad (\leftarrow) A x = − 25.0 kN = 25.0 kN ( ← ) Apply vertical equilibrium: ∑ F y = 0 ⟹ A y − P y − W + B y = 0 \sum F_y = 0 \implies A_y - P_y - W + B_y = 0 ∑ F y = 0 ⟹ A y − P y − W + B y = 0 A y − 43.301 − 48.0 + 43.075 = 0 A_y - 43.301 - 48.0 + 43.075 = 0 A y − 43.301 − 48.0 + 43.075 = 0 A y = 48.226 kN ≈ 48.23 kN ( ↑ ) A_y = 48.226\text{ kN} \approx 48.23\text{ kN} \quad (\uparrow) A y = 48.226 kN ≈ 48.23 kN ( ↑ )
Check Vertical Equilibrium: A y + B y = 48.226 + 43.075 = 91.301 kN A_y + B_y = 48.226 + 43.075 = 91.301\text{ kN} A y + B y = 48.226 + 43.075 = 91.301 kN P y + W = 43.301 + 48.0 = 91.301 kN ( Matches exactly ) P_y + W = 43.301 + 48.0 = 91.301\text{ kN} \quad (\text{Matches exactly}) P y + W = 43.301 + 48.0 = 91.301 kN ( Matches exactly )
Step 5: Resultant Reaction at Pin A A A R A = A x 2 + A y 2 = ( − 25.0 ) 2 + ( 48.226 ) 2 = 625.0 + 2325.75 = 2950.75 = 54.32 kN R_A = \sqrt{A_x^2 + A_y^2} = \sqrt{(-25.0)^2 + (48.226)^2} = \sqrt{625.0 + 2325.75} = \sqrt{2950.75} = 54.32\text{ kN} R A = A x 2 + A y 2 = ( − 25.0 ) 2 + ( 48.226 ) 2 = 625.0 + 2325.75 = 2950.75 = 54.32 kN θ A = arctan ( 48.226 25.0 ) = 62.6 ∘ ( upward to the left ) \theta_A = \arctan\left( \frac{48.226}{25.0} \right) = 62.6^\circ \quad (\text{upward to the left}) θ A = arctan ( 25.0 48.226 ) = 62. 6 ∘ ( upward to the left )
Step 6: Location of Single Resultant of Applied External Loads The net vertical load applied to the beam is R y , load = P y + W = 91.301 kN ↓ R_{y,\text{load}} = P_y + W = 91.301\text{ kN} \downarrow R y , load = P y + W = 91.301 kN ↓ .
The net moment of external loads about point A A A is: M A , applied = ( P y × 2.0 ) + ( W × 6.0 ) − M 0 = 86.602 + 288.0 − 30.0 = 344.602 kN ⋅ m ( CW ) M_{A,\text{applied}} = (P_y \times 2.0) + (W \times 6.0) - M_0 = 86.602 + 288.0 - 30.0 = 344.602\text{ kN}\cdot\text{m} \quad (\text{CW}) M A , applied = ( P y × 2.0 ) + ( W × 6.0 ) − M 0 = 86.602 + 288.0 − 30.0 = 344.602 kN ⋅ m ( CW ) The single resultant vertical force must act at a distance x R x_R x R from A A A producing identical moment: x R = M A , applied R y , load = 344.602 kN ⋅ m 91.301 kN = 3.774 m from A x_R = \frac{M_{A,\text{applied}}}{R_{y,\text{load}}} = \frac{344.602\text{ kN}\cdot\text{m}}{91.301\text{ kN}} = 3.774\text{ m from } A x R = R y , load M A , applied = 91.301 kN 344.602 kN ⋅ m = 3.774 m from A
CELE Board Exam Traps & Strategic Checklists
Warning
Couple Moment Arm Distance Trap: Applied couple moments (e.g., M 0 = 30 kN ⋅ m M_0 = 30\text{ kN}\cdot\text{m} M 0 = 30 kN ⋅ m ) are already moments ( [ Force ] × [ Length ] [\text{Force}] \times [\text{Length}] [ Force ] × [ Length ] ). Never multiply a couple moment by a moment arm distance ! An examinee who multiplies M 0 × 5.0 m = 150 kN ⋅ m 2 M_0 \times 5.0\text{ m} = 150\text{ kN}\cdot\text{m}^2 M 0 × 5.0 m = 150 kN ⋅ m 2 introduces a fatal dimensional error.
Sliding Vector vs. Line of Action: A force may be applied anywhere along its line of action without changing the rigid body's external support reactions (Principle of Transmissibility). However, it does alter internal shear and bending moments within the member!
The Sign of A x A_x A x : If an applied load pushes horizontally to the right ( + x +x + x ), the reacting pin must push to the left ( − x -x − x ). Always state both the magnitude and physical direction vector arrow.