Study guide

1.1 CELE Structure, Format, Scoring, and 2026 Subject Order

PRC Civil Engineer Licensure Examination CELE

Track your progress as you read

Finished sections get a check mark.

1 Chapter 1: Examination Overview, RA 544 & Professional Practice

1.1 CELE Structure, Format, Scoring, and 2026 Subject Order 1.2 Republic Act No. 544: The Civil Engineering Law and Board Regulations 1.3 Civil Engineering Ethics, Contracts, and Professional Practice

2 Chapter 2: Engineering Mathematics, Numerical Methods & Physics

2.1 Advanced Algebra, Progressions & Word Problems 2.2 Trigonometry and Analytical Geometry 2.3 Differential and Integral Calculus 2.4 Differential Equations and Numerical Methods 2.5 Series, Hyperbolic Functions, Multivariable Calculus, and Laplace Transforms 2.6 Numerical Methods: Linear Systems, Interpolation, Curve Fitting, and ODE Solvers 2.7 Physics for Engineers: Kinematics, Newton's Laws, Work-Energy, and Momentum

3 Chapter 3: Engineering Data Analysis & Engineering Economy

3.1 Engineering Data Analysis and Statistical Applications 3.2 Parameter Estimation, Linear Regression, Correlation, and Queuing Models 3.3 Engineering Economy: Time Value of Money and Interest Formulas 3.4 Project Evaluation, Depreciation, and Benefit-Cost Analysis

4 Chapter 4: Surveying Fundamentals, Construction Layout & Route Surveying

4.1 Errors, Corrections, and Pacing/Taping 4.2 Leveling, Earthworks, and Mass Haul Diagrams 4.3 Traverse Computations, Balancing, and Area Determinations 4.4 Route Surveying: Horizontal and Vertical Curves

5 Chapter 5: Highway & Transportation Engineering

5.1 Highway Geometric Design and Sight Distances 5.2 Traffic Engineering, Flow Fundamentals, and Pavement Design 5.3 Highway Policy, Route Location, Drainage, and Earthwork Slopes 5.4 Transportation Planning, Network Analysis, and Intermodal Systems

6 Chapter 6: Construction Materials, Methods, Management & Safety

6.1 Materials for Construction: Concrete, Formwork, Masonry, Steel, and Wood Products 6.2 Construction Equipment, Formwork, and Construction Methods 6.3 Construction Occupational Safety and Health: RA 11058 and DOLE DO 13 6.4 Construction Project Management, CPM/PERT, and Resource Scheduling 6.5 Construction Principles: Design Requirements, Project Organization, Cost Control, and Value Engineering 6.6 Quantity Surveying, Unit Cost Analysis, and Project Cost Estimates 6.7 Construction Trades and Specialties: Plumbing, Plastics, Doors and Windows, Finishes, and Electrical

7 Chapter 7: Fluid Properties, Hydrostatics & Buoyancy

7.1 Fluid Properties, Units, and Pressure Measurement 7.2 Hydrostatic Pressure on Plane and Curved Surfaces 7.3 Buoyancy, Flotation, and Accelerated Fluid Masses

8 Chapter 8: Hydrodynamics, Pipe Flow, Open Channels & Water Supply

8.1 Fluid Dynamics: Continuity and Energy Equations 8.2 Flow Measurement: Orifices, Weirs, and Venturi Meters 8.3 Fluid Flow in Pipes, Friction Losses, and Pipe Networks 8.4 Open Channel Flow, Manning's Equation, and Hydraulic Jump 8.5 Water Supply: Demand, Storage, Pumping, Distribution, and Treatment

9 Chapter 9: Soil Properties, Seepage & Stresses in Soil Mass

9.1 Soil Composition, Weight-Volume Phase Relationships 9.2 Soil Classification Systems (USCS & AASHTO) and Atterberg Limits 9.3 Soil Permeability, Seepage, Flow Nets, and Effective Stress 9.4 Stresses in Soil Mass, Stress Distribution, and Immediate and Secondary Settlement

10 Chapter 10: Consolidation, Soil Strength, Earth Pressures & Foundations

10.1 Soil Compaction and Soil Compressibility/Consolidation 10.2 Shear Strength of Soils and Mohr-Coulomb Failure Criteria 10.3 Lateral Earth Pressures (Rankine & Coulomb) and Retaining Walls 10.4 Shallow and Deep Foundation Bearing Capacity and Slope Stability

11 Chapter 11: Engineering Mechanics & Statics

11.1 Force Systems, Resultants, and Equilibrium of Rigid Bodies 11.2 Centroids, Moments of Inertia, and Friction 11.3 Cables, Trusses, and Internal Forces in Members

12 Chapter 12: Strength of Materials

12.1 Axial Stress, Strain, and Deformation 12.2 Torsion, Flanged Bolt Couplings, and Thin-Walled Pressure Vessels 12.3 Beam Stresses: Flexural and Transverse Shear 12.4 Beam Deflections, Combined Stresses, and Mohr's Circle

13 Chapter 13: Structural Analysis & NSCP Load Criteria

13.1 Indeterminate Structures: Approximate and Classical Methods 13.2 Moment Distribution Method and Slope Deflection 13.3 Influence Lines for Determinate and Indeterminate Structures 13.4 NSCP Minimum Design Loads: Dead, Live, Wind, and Earthquake

14 Chapter 14: Reinforced Concrete Design (NSCP 2015 / USD)

14.1 Ultimate Strength Design (USD) Principles and Singly Reinforced Beams 14.2 Doubly Reinforced Beams and T-Beams 14.3 Shear and Diagonal Tension, Stirrup Design, and Development Length 14.4 Reinforced Concrete Columns and Isolated Footing Design

15 Chapter 15: Steel, Timber & Prestressed Design and Materials Testing

15.1 Structural Steel Tension Members and Connections 15.2 Structural Steel Compression Members and Beam Design 15.3 Timber Design Principles, Working Stress, and Sawn Lumber Beams 15.4 Prestressed Concrete Fundamentals and Prestress Losses 15.5 Construction Materials Testing and Concrete Mix Proportioning

1.1 CELE Structure, Format, Scoring, and 2026 Subject Order

Key Takeaways Explain This Topic AI

Board Resolution No. 01, s. 2026 placed PSAD on Day 1 from 8:00 AM to 2:00 PM, giving 6 hours for 75 computational items.

The 2022 TOS (Board Resolution No. 01, s. 2022) lists 75 PSAD items, 75 AMSTHC items, and 50 HGE items.

The CELE rating rule is a general weighted average of at least 70% with no subject rating below 50%.

PRC reported 6,438 passers out of 18,370 examinees (35.05%) in March 2026 and 6,337 out of 17,062 (37.14%) in September 2026.

Board Resolution No. 05, s. 2024 removed the Casio fx-570ES Plus from the CELE list of allowed calculators.

Last updated: October 2026

1.1 CELE Structure, Format, Scoring, and 2026 Subject Order

The Civil Engineers Licensure Examination (CELE) is the technical examination that Section 8 of Republic Act No. 544 (the Civil Engineering Law) requires before anyone may register to practice civil engineering in the Philippines. The Professional Regulation Commission (PRC) administers it through the Professional Regulatory Board of Civil Engineering . Under Section 9(h) of RA 8981 (the PRC Modernization Act of 2000), the Board prepares the Tables of Specifications (TOS) that define what may be asked. Questions must stay within that scope.

This section summarizes the official structure first, so that every later chapter can be tied to a specific TOS line.

Official Documents That Define the Exam

Document What it fixes Status

Board Resolution No. 01, s. 2022 and its Annex A Revised TOS: competencies, item counts, and difficulty levels for all three subjects Applied from the May 2022 CELE onward

Board Resolution No. 01, s. 2026 New subject order and session hours Applied from the March 2026 CELE onward

Board Resolution No. 05, s. 2024 Updated list of allowed non-programmable calculators Applied from the June 2024 special examinations onward

PRC 2026 Schedule of Examinations Dates, testing centers, filing deadlines CELE on March 26–27 and September 26–27, 2026

The 2022 TOS classifies items as Easy (remembering and understanding), Moderate (applying and analyzing), or Difficult (evaluating and creating). It also states that each TOS must reflect the knowledge, skills, values, application, and independence descriptors of the Philippine Qualifications Framework (RA 10968).

The Three Subjects, Sessions, and Item Counts

Resolution No. 01, s. 2026 moved Principles of Structural Analysis and Design to the first day and lengthened its session. The Board's stated reasons were a more balanced distribution of subjects and "a more reasonable time to solve seventy-five (75) test questions requiring computations."

  • Day and time (from March 2026) Subject Session length Items in the 2022 TOS
  • Day 1, 8:00 AM – 2:00 PM Principles of Structural Analysis and Design (PSAD) 6 hours 75

Day 2, 8:00 AM – 1:00 PM Applied Mathematics, Surveying, Principles of Transportation and Highway Engineering, Construction Management and Methods (AMSTHC) 5 hours 75

Day 2, 2:00 PM – 6:00 PM Hydraulics and Principles of Geotechnical Engineering (HGE) 4 hours 50

Before March 2026, the order was AMSTHC (Day 1 morning, 5 hours), HGE (Day 1 afternoon, 4 hours), and PSAD (Day 2 morning, 5 hours). Total examination time therefore rose from 14 to 15 hours .

The HGE TOS sheet carries the heading "Total (for 100 items)", but its item column sums to 50 and its weights sum to 100%. Treat 50 as the TOS item count, and confirm the actual booklet length on your examination program.

Pacing implied by the official numbers

  • Subject Minutes per item
  • PSAD 360 ÷ 75 = 4.8 360 \div 75 = 4.8 360 ÷ 75 = 4.8
  • AMSTHC 300 ÷ 75 = 4.0 300 \div 75 = 4.0 300 ÷ 75 = 4.0
  • HGE 240 ÷ 50 = 4.8 240 \div 50 = 4.8 240 ÷ 50 = 4.8

Most items require computation, so these averages are tight. You should be able to solve routine problems, such as tape corrections, Manning's equation, or beam reactions, in 2–3 minutes, which banks time for situational sets.

What each subject's TOS contains

PSAD (25 competencies, 3 items each). Engineering mechanics; strength of materials; theory of structures (six competencies, including influence lines, indeterminacy, and pattern loading); reinforced and prestressed concrete; steel beams and columns, including eccentric loads; bolted and welded connections; spread footings and pile loads; construction materials testing and concrete mix proportioning.

AMSTHC (15 areas × 5 competencies, 1 item each). Calculus; differential equations; engineering data analysis; numerical methods; physics for engineers; engineering economics; construction surveying and layout; materials for construction; highway engineering; construction occupational safety and health (including RA 11058); transportation engineering; quantity surveying; construction principles; construction trades and specialties; construction equipment and methods.

HGE (13 topics). Fluid properties (1 item), hydrostatic pressure and center of pressure (8), fluid flow (6), buoyancy and flotation (4), hydrodynamics (3), water supply (4), soil properties (4), soil classification (2), permeability and seepage (3), stresses in soil mass (6), soil strength (2), settlement (6), and foundation engineering (1).

Important

AMSTHC is the broadest subject. It has 75 separate one-item competencies, so one weak area costs only about 1.3 points. Neglecting several areas, such as quantity surveying, construction trades, or physics, adds up fast. In PSAD and HGE, each competency is worth 3–8 items, so depth in hydrostatics, settlement, theory of structures, and reinforced concrete pays off most.

Subject Weights and the Passing Rule

PRC's current documents (the 2022 TOS and the 2026 schedule resolution) list subjects and item counts but do not restate subject weights. The weighting used in schools and review programs is 35% / 35% / 30% . It comes from Board Resolution No. 68 (1998), which assigned 35% to the mathematics–surveying–transportation subject, 30% to hydraulics and geotechnical engineering, and 35% to the structural and construction subject. Board Resolution No. 08, s. 2009 proposed equal 33⅓% weights with 4-hour sessions, but the 5-hour and 4-hour sessions still in use follow the older scheme.

The rating rule applied to the CELE is a general weighted average of at least 70% , with no rating below 50% in any subject. Using the 35/35/30 weights: GWA = 0.35 R PSAD + 0.35 R AMSTHC + 0.30 R HGE \text{GWA} = 0.35\,R_{\text{PSAD}} + 0.35\,R_{\text{AMSTHC}} + 0.30\,R_{\text{HGE}} GWA = 0.35 R PSAD ​ + 0.35 R AMSTHC ​ + 0.30 R HGE ​

Example. With ratings of PSAD 78%, AMSTHC 74%, and HGE 52%: 0.35 ( 78 ) + 0.35 ( 74 ) + 0.30 ( 52 ) = 27.30 + 25.90 + 15.60 = 68.80 % 0.35(78) + 0.35(74) + 0.30(52) = 27.30 + 25.90 + 15.60 = 68.80\% 0.35 ( 78 ) + 0.35 ( 74 ) + 0.30 ( 52 ) = 27.30 + 25.90 + 15.60 = 68.80% . The candidate fails on the average even though every subject is at or above 50%. With HGE at 58%, the average becomes 70.60 % 70.60\% 70.60% , which passes.

Loading diagram...

Schedule, Testing Centers, and Recent Results

PRC's 2026 schedule lists two regular CELE administrations: March 26–27, 2026 (Thursday–Friday) and September 26–27, 2026 (Saturday–Sunday). They are held in NCR, Baguio, Butuan, Cagayan de Oro, Calapan, Cebu, Davao, Iloilo, Koronadal, Legazpi, Lucena, Pagadian, Palawan, Pampanga, Rosales, Tacloban, Tuguegarao, Zamboanga, and Ilocos Sur. The schedule also lists a Special Professional Licensure Examination for civil engineers on May 29–30, 2026, in Hong Kong, Singapore, and Taiwan.

  • Administration Examinees Passers Passing rate
  • September 2026 (results released October 2, 2026) 17,062 6,337 37.14%
  • March 2026 (results released April 7, 2026) 18,370 6,438 35.05%
  • November 2025 14,043 4,268 30.39%
  • April 2025 16,913 4,940 29.21%

Roughly two of every three examinees fail, so treat passing as a coverage problem, not a talent problem.

Calculators and Examination-Room Rules

Board Resolution No. 05, s. 2024 removed the Casio fx-570ES Plus , with or without a transparent or smoked casing, from the list of allowed calculators. The Board cited incident reports of tampered units being used as communication devices. The annexed list includes models such as:

  • Casio: fx-991S, fx-991W, fx-570MS, fx-350ES PLUS, fx-350EX, fx-82ES PLUS, fx-82EX
  • Canon: F-789SGA (transparent casing), F-718SGA
  • Sharp: EL-W531TH-WH (transparent casing), EL-531XH
  • Texas Instruments: TI-30XS, TI-36X Pro

Popular solar-programmable or ClassWiz models are not on the list unless the annex names them, for example the fx-991EX and fx-991CW. Check the current annex and your Notice of Admission before buying a calculator, and practice on the exact model you will bring.

A Study Strategy Matched to the TOS

Map before you study. Use the competency lists above as your checklist. Every chapter in this guide states which TOS lines it serves.

Protect the 50% floor. HGE has the fewest items and the shortest session, and one bad afternoon can sink an otherwise strong candidate. Keep at least one HGE problem set in every review week.

Rehearse the 2026 order. Your first block of the exam is now a 6-hour structural session. Build stamina with full-length PSAD mocks on a weekday morning.

Use situational sets. Reviewers commonly group 3 related items around one figure. Read all 3 questions before computing, because the second or third often reuses intermediate values.

Loading diagram... CELE Session Order from March 2026 (Board Resolution No. 01, s. 2026)