Study guide

7.2 Hydrostatic Pressure on Plane and Curved Surfaces

PRC Civil Engineer Licensure Examination CELE

Track your progress as you read

Finished sections get a check mark.

1 Chapter 1: Examination Overview, RA 544 & Professional Practice

1.1 CELE Structure, Format, Scoring, and 2026 Subject Order 1.2 Republic Act No. 544: The Civil Engineering Law and Board Regulations 1.3 Civil Engineering Ethics, Contracts, and Professional Practice

2 Chapter 2: Engineering Mathematics, Numerical Methods & Physics

2.1 Advanced Algebra, Progressions & Word Problems 2.2 Trigonometry and Analytical Geometry 2.3 Differential and Integral Calculus 2.4 Differential Equations and Numerical Methods 2.5 Series, Hyperbolic Functions, Multivariable Calculus, and Laplace Transforms 2.6 Numerical Methods: Linear Systems, Interpolation, Curve Fitting, and ODE Solvers 2.7 Physics for Engineers: Kinematics, Newton's Laws, Work-Energy, and Momentum

3 Chapter 3: Engineering Data Analysis & Engineering Economy

3.1 Engineering Data Analysis and Statistical Applications 3.2 Parameter Estimation, Linear Regression, Correlation, and Queuing Models 3.3 Engineering Economy: Time Value of Money and Interest Formulas 3.4 Project Evaluation, Depreciation, and Benefit-Cost Analysis

4 Chapter 4: Surveying Fundamentals, Construction Layout & Route Surveying

4.1 Errors, Corrections, and Pacing/Taping 4.2 Leveling, Earthworks, and Mass Haul Diagrams 4.3 Traverse Computations, Balancing, and Area Determinations 4.4 Route Surveying: Horizontal and Vertical Curves

5 Chapter 5: Highway & Transportation Engineering

5.1 Highway Geometric Design and Sight Distances 5.2 Traffic Engineering, Flow Fundamentals, and Pavement Design 5.3 Highway Policy, Route Location, Drainage, and Earthwork Slopes 5.4 Transportation Planning, Network Analysis, and Intermodal Systems

6 Chapter 6: Construction Materials, Methods, Management & Safety

6.1 Materials for Construction: Concrete, Formwork, Masonry, Steel, and Wood Products 6.2 Construction Equipment, Formwork, and Construction Methods 6.3 Construction Occupational Safety and Health: RA 11058 and DOLE DO 13 6.4 Construction Project Management, CPM/PERT, and Resource Scheduling 6.5 Construction Principles: Design Requirements, Project Organization, Cost Control, and Value Engineering 6.6 Quantity Surveying, Unit Cost Analysis, and Project Cost Estimates 6.7 Construction Trades and Specialties: Plumbing, Plastics, Doors and Windows, Finishes, and Electrical

7 Chapter 7: Fluid Properties, Hydrostatics & Buoyancy

7.1 Fluid Properties, Units, and Pressure Measurement 7.2 Hydrostatic Pressure on Plane and Curved Surfaces 7.3 Buoyancy, Flotation, and Accelerated Fluid Masses

8 Chapter 8: Hydrodynamics, Pipe Flow, Open Channels & Water Supply

8.1 Fluid Dynamics: Continuity and Energy Equations 8.2 Flow Measurement: Orifices, Weirs, and Venturi Meters 8.3 Fluid Flow in Pipes, Friction Losses, and Pipe Networks 8.4 Open Channel Flow, Manning's Equation, and Hydraulic Jump 8.5 Water Supply: Demand, Storage, Pumping, Distribution, and Treatment

9 Chapter 9: Soil Properties, Seepage & Stresses in Soil Mass

9.1 Soil Composition, Weight-Volume Phase Relationships 9.2 Soil Classification Systems (USCS & AASHTO) and Atterberg Limits 9.3 Soil Permeability, Seepage, Flow Nets, and Effective Stress 9.4 Stresses in Soil Mass, Stress Distribution, and Immediate and Secondary Settlement

10 Chapter 10: Consolidation, Soil Strength, Earth Pressures & Foundations

10.1 Soil Compaction and Soil Compressibility/Consolidation 10.2 Shear Strength of Soils and Mohr-Coulomb Failure Criteria 10.3 Lateral Earth Pressures (Rankine & Coulomb) and Retaining Walls 10.4 Shallow and Deep Foundation Bearing Capacity and Slope Stability

11 Chapter 11: Engineering Mechanics & Statics

11.1 Force Systems, Resultants, and Equilibrium of Rigid Bodies 11.2 Centroids, Moments of Inertia, and Friction 11.3 Cables, Trusses, and Internal Forces in Members

12 Chapter 12: Strength of Materials

12.1 Axial Stress, Strain, and Deformation 12.2 Torsion, Flanged Bolt Couplings, and Thin-Walled Pressure Vessels 12.3 Beam Stresses: Flexural and Transverse Shear 12.4 Beam Deflections, Combined Stresses, and Mohr's Circle

13 Chapter 13: Structural Analysis & NSCP Load Criteria

13.1 Indeterminate Structures: Approximate and Classical Methods 13.2 Moment Distribution Method and Slope Deflection 13.3 Influence Lines for Determinate and Indeterminate Structures 13.4 NSCP Minimum Design Loads: Dead, Live, Wind, and Earthquake

14 Chapter 14: Reinforced Concrete Design (NSCP 2015 / USD)

14.1 Ultimate Strength Design (USD) Principles and Singly Reinforced Beams 14.2 Doubly Reinforced Beams and T-Beams 14.3 Shear and Diagonal Tension, Stirrup Design, and Development Length 14.4 Reinforced Concrete Columns and Isolated Footing Design

15 Chapter 15: Steel, Timber & Prestressed Design and Materials Testing

15.1 Structural Steel Tension Members and Connections 15.2 Structural Steel Compression Members and Beam Design 15.3 Timber Design Principles, Working Stress, and Sawn Lumber Beams 15.4 Prestressed Concrete Fundamentals and Prestress Losses 15.5 Construction Materials Testing and Concrete Mix Proportioning

7.2 Hydrostatic Pressure on Plane and Curved Surfaces

Key Takeaways Explain This Topic AI

The total hydrostatic thrust on an inclined plane area equals the product of fluid specific weight, centroidal vertical depth, and submerged area ( F = γ h ˉ A F = \gamma \bar{h} A F = γ h ˉ A ), acting perpendicular to the plate surface.

The center of pressure (CP) is always located deeper along the plane than the area centroid by the eccentricity e = I c g y ˉ A e = \frac{I_{cg}}{\bar{y} A} e = y ˉ ​ A I c g ​ ​ , where y ˉ \bar{y} y ˉ ​ is the inclined distance from the liquid surface axis to the centroid.

Hydrostatic forces on curved surfaces resolve into a horizontal thrust F h = γ h ˉ p r o j A p r o j F_h = \gamma \bar{h}_{proj} A_{proj} F h ​ = γ h ˉ p ro j ​ A p ro j ​ (acting at the CP of the vertical projection) and a vertical thrust F v = γ V F_v = \gamma V F v ​ = γV (acting through the centroid of the real or virtual liquid prism extending to the free surface).

For circular arc gates, all local hydrostatic pressure vectors act normal to the surface, causing the resultant force R = F h 2 + F v 2 R = \sqrt{F_h^2 + F_v^2} R = F h 2 ​ + F v 2 ​ ​ to pass directly through the geometric center of curvature.

Concrete gravity dam stability mandates a factor of safety against overturning F S o t ≥ 1.5 FS_{ot} \ge 1.5 F S o t ​ ≥ 1.5 , factor of safety against sliding F S s l ≥ 1.5 FS_{sl} \ge 1.5 F S s l ​ ≥ 1.5 , and adherence to the middle-third rule (eccentricity e ≤ B / 6 e \le B/6 e ≤ B /6 ) to prevent tensile cracking at the upstream heel.

Last updated: October 2026

7.2 Hydrostatic Pressure on Plane and Curved Surfaces

A critical competency tested in the CELE Hydraulics and Geotechnical Engineering examination is calculating the magnitude, direction, and precise location of the resultant hydrostatic thrust acting upon hydraulic gates, retainers, and gravity dam cross-sections.

1. Hydrostatic Force on Submerged Plane Surfaces

Consider a plane surface of arbitrary geometry and total area A A A submerged in a static liquid of specific weight γ \gamma γ , inclined at an angle θ \theta θ relative to the horizontal liquid surface. Let y y y be the inclined coordinate along the plane measured from the line of intersection with the free surface, such that vertical depth is h = y sin ⁡ θ h = y \sin \theta h = y sin θ .

Loading diagram...

Resultant Force Magnitude

The elemental hydrostatic thrust on area d A dA d A is d F = P d A = ( γ h ) d A = ( γ y sin ⁡ θ ) d A dF = P dA = (\gamma h) dA = (\gamma y \sin \theta) dA d F = P d A = ( γh ) d A = ( γ y sin θ ) d A . Integrating over the entire area: F = ∫ A γ y sin ⁡ θ d A = γ sin ⁡ θ ∫ A y d A F = \int_A \gamma y \sin \theta dA = \gamma \sin \theta \int_A y dA F = ∫ A ​ γ y sin θ d A = γ sin θ ∫ A ​ y d A Recalling the first moment of area ∫ A y d A = y ˉ A \int_A y dA = \bar{y} A ∫ A ​ y d A = y ˉ ​ A , where y ˉ \bar{y} y ˉ ​ is the inclined distance to the area centroid: F = γ ( y ˉ sin ⁡ θ ) A = γ h ˉ A F = \gamma (\bar{y} \sin \theta) A = \gamma \bar{h} A F = γ ( y ˉ ​ sin θ ) A = γ h ˉ A

Rule: The total hydrostatic force on any submerged plane surface equals the pressure at its centroid multiplied by the total submerged area, acting strictly perpendicular to the surface.

Location of the Center of Pressure ( C P CP CP )

Because pressure increases with depth, the resultant force does not act at the centroid ( C G CG CG ), but at a deeper point designated the Center of Pressure ( C P CP CP ) ( x p , y p ) (x_p, y_p) ( x p ​ , y p ​ ) . Taking moments of elemental forces about the surface intersection axis ( x x x -axis) and applying Varignon's Theorem: y p F = ∫ A y d F = ∫ A y ( γ y sin ⁡ θ d A ) = γ sin ⁡ θ ∫ A y 2 d A = γ sin ⁡ θ I x y_p F = \int_A y dF = \int_A y (\gamma y \sin \theta dA) = \gamma \sin \theta \int_A y^2 dA = \gamma \sin \theta I_x y p ​ F = ∫ A ​ y d F = ∫ A ​ y ( γ y sin θ d A ) = γ sin θ ∫ A ​ y 2 d A = γ sin θ I x ​ Substituting F = γ y ˉ sin ⁡ θ A F = \gamma \bar{y} \sin \theta A F = γ y ˉ ​ sin θ A and using the Parallel Axis Theorem ( I x = I c g + A y ˉ 2 I_x = I_{cg} + A \bar{y}^2 I x ​ = I c g ​ + A y ˉ ​ 2 ): y p = I x y ˉ A = I c g + A y ˉ 2 y ˉ A = y ˉ + I c g y ˉ A y_p = \frac{I_x}{\bar{y} A} = \frac{I_{cg} + A \bar{y}^2}{\bar{y} A} = \bar{y} + \frac{I_{cg}}{\bar{y} A} y p ​ = y ˉ ​ A I x ​ ​ = y ˉ ​ A I c g ​ + A y ˉ ​ 2 ​ = y ˉ ​ + y ˉ ​ A I c g ​ ​

The distance e = y p − y ˉ = I c g y ˉ A e = y_p - \bar{y} = \frac{I_{cg}}{\bar{y} A} e = y p ​ − y ˉ ​ = y ˉ ​ A I c g ​ ​ is the centroidal eccentricity of the center of pressure.

Lateral coordinate x p x_p x p ​ is determined via product of inertia: x p = x ˉ + I x y , c g y ˉ A x_p = \bar{x} + \frac{I_{xy,cg}}{\bar{y} A} x p ​ = x ˉ + y ˉ ​ A I x y , c g ​ ​ If the plane has a vertical axis of symmetry passing through C G CG CG , I x y , c g = 0 I_{xy,cg} = 0 I x y , c g ​ = 0 , so x p = x ˉ x_p = \bar{x} x p ​ = x ˉ .

Geometric Properties of Common Cross-Sections

Cross-Section Area ( A A A ) Centroid Location ( y ˉ \bar{y} y ˉ ​ ) Centroidal Moment of Inertia ( I c g I_{cg} I c g ​ ) Eccentricity ( e = y p − y ˉ e = y_p - \bar{y} e = y p ​ − y ˉ ​ )

Rectangle ( b × h b \times h b × h ) b h b h bh h / 2 h/2 h /2 from top edge b h 3 12 \frac{bh^3}{12} 12 b h 3 ​ h 2 12 y ˉ \frac{h^2}{12 \bar{y}} 12 y ˉ ​ h 2 ​

Triangle (Base b b b , Height h h h , vertex up) 1 2 b h \frac{1}{2}bh 2 1 ​ bh 2 3 h \frac{2}{3}h 3 2 ​ h from vertex b h 3 36 \frac{bh^3}{36} 36 b h 3 ​ h 2 18 y ˉ \frac{h^2}{18 \bar{y}} 18 y ˉ ​ h 2 ​

Triangle (Base b b b , Height h h h , base up) 1 2 b h \frac{1}{2}bh 2 1 ​ bh 1 3 h \frac{1}{3}h 3 1 ​ h from base b h 3 36 \frac{bh^3}{36} 36 b h 3 ​ h 2 18 y ˉ \frac{h^2}{18 \bar{y}} 18 y ˉ ​ h 2 ​

Circle (Diameter d d d ) π d 2 4 \frac{\pi d^2}{4} 4 π d 2 ​ d / 2 d/2 d /2 (center) π d 4 64 \frac{\pi d^4}{64} 64 π d 4 ​ d 2 16 y ˉ \frac{d^2}{16 \bar{y}} 16 y ˉ ​ d 2 ​

Semicircle (Radius r r r , flat edge horizontal) π r 2 2 \frac{\pi r^2}{2} 2 π r 2 ​ 4 r 3 π ≈ 0.424 r \frac{4r}{3\pi} \approx 0.424r 3 π 4 r ​ ≈ 0.424 r from diameter 0.10976 r 4 0.10976 r^4 0.10976 r 4 0.10976 r 4 y ˉ A \frac{0.10976 r^4}{\bar{y} A} y ˉ ​ A 0.10976 r 4 ​

2. The Pressure Prism Method

For planar rectangular surfaces of uniform width b b b , the linear hydrostatic pressure distribution forms a three-dimensional volume known as the pressure prism .

Volume of Pressure Prism: The total resultant force equals the volume of this prism: F = Volume = ( P top + P bottom 2 ) A F = \text{Volume} = \left(\frac{P_{\text{top}} + P_{\text{bottom}}}{2}\right) A F = Volume = ( 2 P top ​ + P bottom ​ ​ ) A

Line of Action: The resultant force passes directly through the centroid of the pressure prism. For a vertical rectangular gate extending from the liquid surface ( P top = 0 P_{\text{top}} = 0 P top ​ = 0 ) to depth h h h , the prism is triangular, so the resultant acts at 2 3 h \frac{2}{3}h 3 2 ​ h from the surface (or h / 3 h/3 h /3 from the base).

3. Hydrostatic Forces on Curved Surfaces

Because the orientation of the surface normal varies across a curved boundary, direct area integration of pressure vectors is mathematically tedious. The standard engineering approach resolves the resultant force into orthogonal horizontal and vertical components .

Horizontal Component ( F h F_h F h ​ )

The horizontal force on any curved surface equals the hydrostatic force exerted on the projection of the curved surface onto a vertical plane : F h = γ h ˉ p r o j A p r o j F_h = \gamma \bar{h}_{proj} A_{proj} F h ​ = γ h ˉ p ro j ​ A p ro j ​ where:

A p r o j A_{proj} A p ro j ​ is the projected area of the curved surface onto a vertical plane perpendicular to the direction of interest.

h ˉ p r o j \bar{h}_{proj} h ˉ p ro j ​ is the vertical depth to the centroid of that projected area.

F h F_h F h ​ acts horizontally through the center of pressure of the projected vertical area ( y p , p r o j = y ˉ p r o j + I c g , p r o j y ˉ p r o j A p r o j y_{p,proj} = \bar{y}_{proj} + \frac{I_{cg,proj}}{\bar{y}_{proj} A_{proj}} y p , p ro j ​ = y ˉ ​ p ro j ​ + y ˉ ​ p ro j ​ A p ro j ​ I c g , p ro j ​ ​ ).

Vertical Component ( F v F_v F v ​ )

The vertical hydrostatic force equals the weight of the column of liquid (real or virtual) positioned directly above the curved surface, bounded by the surface and the elevation of the free liquid surface: F v = γ V F_v = \gamma V F v ​ = γV where:

V V V is the volume of the vertical fluid prism extending from the curved boundary up to the free surface datum.

Direction of F v F_v F v ​ :

If real liquid rests above the curved surface, F v F_v F v ​ acts downward .

If liquid lies below the curved surface, F v F_v F v ​ acts upward (uplift force equal to the weight of the imaginary/virtual liquid volume displaced above the surface up to the extended free surface level).

Line of Action: F v F_v F v ​ acts vertically through the centroid of the liquid volume V V V .

Resultant Force and Line of Action

R = F h 2 + F v 2 , θ = arctan ⁡ ( F v F h ) R = \sqrt{F_h^2 + F_v^2}, \quad \theta = \arctan\left(\frac{F_v}{F_h}\right) R = F h 2 ​ + F v 2 ​ ​ , θ = arctan ( F h ​ F v ​ ​ )

Important

The Circular Arc Gate Theorem: For any cylindrical or spherical curved surface (such as a Tainter radial gate), every local hydrostatic pressure vector acts perpendicular to the tangent, pointing normal to the surface. By geometry, all normal lines of a circular arc pass directly through the center of curvature . Consequently, the resultant hydrostatic force R R R must pass through the center of curvature , generating zero moment about a pivot located at the center of curvature.

4. Dam Stability Analysis

Concrete gravity dams resist external water and silt thrust primarily through their own self-weight. In CELE board problems, dam stability is evaluated per unit length ( 1.0 m 1.0\text{ m} 1.0 m strip along the crest).

Loading diagram...

Primary Forces Acting on a Gravity Dam (per linear meter)

Self-Weight of Concrete ( W W W ): Evaluated by dividing the dam cross-section into standard geometric components (triangles and rectangles). Unit weight of plain concrete is typically γ c = 23.5 – 24.0 kN/m 3 \gamma_c = 23.5\text{–}24.0\text{ kN/m}^3 γ c ​ = 23.5 – 24.0 kN/m 3 .

Upstream Hydrostatic Thrust ( F h F_h F h ​ ): F h = 1 2 γ w H 2 F_h = \frac{1}{2} \gamma_w H^2 F h ​ = 2 1 ​ γ w ​ H 2 , acting horizontally at H / 3 H/3 H /3 from the base.

Hydrostatic Uplift Pressure ( U U U ): Underseepage creates an upward pore pressure distribution along the dam-foundation contact interface.

Without drainage gallery: Triangular or trapezoidal uplift from P heel = γ w H P_{\text{heel}} = \gamma_w H P heel ​ = γ w ​ H to P toe = γ w h tailwater P_{\text{toe}} = \gamma_w h_{\text{tailwater}} P toe ​ = γ w ​ h tailwater ​ .

Uplift force: U = 1 2 ( γ w H + γ w h t w ) B U = \frac{1}{2}(\gamma_w H + \gamma_w h_{tw}) B U = 2 1 ​ ( γ w ​ H + γ w ​ h tw ​ ) B , acting at the centroid of the trapezoid.

Stability Evaluation Criteria

Factor of Safety Against Overturning ( F S o t FS_{ot} F S o t ​ ): Taking moments about the downstream toe: F S o t = ∑ M resisting ∑ M overturning = ∑ ( W i x i ) ∑ ( F h , i y i + U x u ) ≥ 1.50 FS_{ot} = \frac{\sum M_{\text{resisting}}}{\sum M_{\text{overturning}}} = \frac{\sum (W_i x_i)}{\sum (F_{h,i} y_i + U x_u)} \ge 1.50 F S o t ​ = ∑ M overturning ​ ∑ M resisting ​ ​ = ∑ ( F h , i ​ y i ​ + U x u ​ ) ∑ ( W i ​ x i ​ ) ​ ≥ 1.50

Factor of Safety Against Sliding ( F S s l FS_{sl} F S s l ​ ): F S s l = μ ∑ R y ∑ R x = μ ( ∑ W − U ) F h − F tailwater ≥ 1.50 FS_{sl} = \frac{\mu \sum R_y}{\sum R_x} = \frac{\mu (\sum W - U)}{F_h - F_{\text{tailwater}}} \ge 1.50 F S s l ​ = ∑ R x ​ μ ∑ R y ​ ​ = F h ​ − F tailwater ​ μ ( ∑ W − U ) ​ ≥ 1.50 where μ \mu μ is the coefficient of friction between the concrete base and bedrock (typically 0.50 – 0.70 0.50\text{–}0.70 0.50 – 0.70 ).

Foundation Bearing Pressure and the Middle-Third Rule: The net vertical foundation reaction is R y = ∑ W − U R_y = \sum W - U R y ​ = ∑ W − U . The location of the resultant force from the toe is: x ˉ = ∑ M toe ∑ R y = ∑ M R − ∑ M O T ∑ R y \bar{x} = \frac{\sum M_{\text{toe}}}{\sum R_y} = \frac{\sum M_R - \sum M_{OT}}{\sum R_y} x ˉ = ∑ R y ​ ∑ M toe ​ ​ = ∑ R y ​ ∑ M R ​ − ∑ M OT ​ ​ The eccentricity from the center of the base ( B / 2 B/2 B /2 ) is: e = ∣ B 2 − x ˉ ∣ e = \left|\frac{B}{2} - \bar{x}\right| e = ​ 2 B ​ − x ˉ ​

Case 1: Resultant within Middle-Third ( e ≤ B / 6 e \le B/6 e ≤ B /6 ): Compression is maintained across the entire base width. Bearing pressure is given by the flexure formula: q = R y B ( 1 ± 6 e B ) q = \frac{R_y}{B}\left(1 \pm \frac{6e}{B}\right) q = B R y ​ ​ ( 1 ± B 6 e ​ ) q toe = R y B ( 1 + 6 e B ) , q heel = R y B ( 1 − 6 e B ) q_{\text{toe}} = \frac{R_y}{B}\left(1 + \frac{6e}{B}\right), \quad q_{\text{heel}} = \frac{R_y}{B}\left(1 - \frac{6e}{B}\right) q toe ​ = B R y ​ ​ ( 1 + B 6 e ​ ) , q heel ​ = B R y ​ ​ ( 1 − B 6 e ​ )

Case 2: Resultant outside Middle-Third ( e > B / 6 e > B/6 e > B /6 ): The heel experiences theoretical tension. Because soil and rock cannot sustain tension, tensile separation (cracking) occurs. The bearing stress redistributes into a purely compressive triangle over an effective contact length of 3 x ˉ 3\bar{x} 3 x ˉ : q max = 2 R y 3 x ˉ , q heel = 0 q_{\text{max}} = \frac{2 R_y}{3 \bar{x}}, \quad q_{\text{heel}} = 0 q max ​ = 3 x ˉ 2 R y ​ ​ , q heel ​ = 0

5. Worked Example: Submerged Inclined Sluice Gate

Problem Statement: A rectangular sluice gate 2.0 m 2.0\text{ m} 2.0 m wide ( b = 2.0 m b = 2.0\text{ m} b = 2.0 m ) and 3.0 m 3.0\text{ m} 3.0 m long ( L = 3.0 m L = 3.0\text{ m} L = 3.0 m ) is installed in a reservoir wall inclined at θ = 60 ∘ \theta = 60^\circ θ = 6 0 ∘ to the horizontal. The gate is hinged at its top edge, which is located at a vertical depth of 2.50 m 2.50\text{ m} 2.50 m below the water surface. Freshwater specific weight is γ w = 9.81 kN/m 3 \gamma_w = 9.81\text{ kN/m}^3 γ w ​ = 9.81 kN/m 3 .

Determine the total hydrostatic force F F F acting on the gate.

Determine the location of the center of pressure from the hinge.

Determine the minimum normal force P P P applied at the bottom edge required to open the gate.

Step-by-Step Solution:

Determine centroidal depth and area:

Area of the gate: A = b × L = 2.0 m × 3.0 m = 6.00 m 2 A = b \times L = 2.0\text{ m} \times 3.0\text{ m} = 6.00\text{ m}^2 A = b × L = 2.0 m × 3.0 m = 6.00 m 2 .

Centroid is at distance L / 2 = 1.50 m L/2 = 1.50\text{ m} L /2 = 1.50 m from the hinge along the incline.

Vertical depth to the centroid: h ˉ = h top + ( L 2 ) sin ⁡ 60 ∘ = 2.50 m + ( 1.50 m ) ( 0.8660 ) = 2.50 + 1.299 = 3.799 m \bar{h} = h_{\text{top}} + \left(\frac{L}{2}\right) \sin 60^\circ = 2.50\text{ m} + (1.50\text{ m})(0.8660) = 2.50 + 1.299 = 3.799\text{ m} h ˉ = h top ​ + ( 2 L ​ ) sin 6 0 ∘ = 2.50 m + ( 1.50 m ) ( 0.8660 ) = 2.50 + 1.299 = 3.799 m

Total hydrostatic force: F = γ w h ˉ A = ( 9.81 kN/m 3 ) ( 3.799 m ) ( 6.00 m 2 ) = 223.61 kN F = \gamma_w \bar{h} A = (9.81\text{ kN/m}^3)(3.799\text{ m})(6.00\text{ m}^2) = 223.61\text{ kN} F = γ w ​ h ˉ A = ( 9.81 kN/m 3 ) ( 3.799 m ) ( 6.00 m 2 ) = 223.61 kN

Determine the Center of Pressure ( C P CP CP ):

Inclined distance from liquid surface to centroid: y ˉ = h ˉ sin ⁡ 60 ∘ = 3.799 m 0.866025 = 4.387 m \bar{y} = \frac{\bar{h}}{\sin 60^\circ} = \frac{3.799\text{ m}}{0.866025} = 4.387\text{ m} y ˉ ​ = s i n 6 0 ∘ h ˉ ​ = 0.866025 3.799 m ​ = 4.387 m

Centroidal eccentricity e e e : e = I c g y ˉ A = b L 3 / 12 y ˉ ( b L ) = L 2 12 y ˉ = ( 3.0 m ) 2 12 ( 4.387 m ) = 9.0 52.644 = 0.171 m e = \frac{I_{cg}}{\bar{y} A} = \frac{b L^3 / 12}{\bar{y} (b L)} = \frac{L^2}{12 \bar{y}} = \frac{(3.0\text{ m})^2}{12 (4.387\text{ m})} = \frac{9.0}{52.644} = 0.171\text{ m} e = y ˉ ​ A I c g ​ ​ = y ˉ ​ ( b L ) b L 3 /12 ​ = 12 y ˉ ​ L 2 ​ = 12 ( 4.387 m ) ( 3.0 m ) 2 ​ = 52.644 9.0 ​ = 0.171 m

Distance from the hinge to C P CP CP : y p , hinge = L 2 + e = 1.50 m + 0.171 m = 1.671 m y_{p,\text{hinge}} = \frac{L}{2} + e = 1.50\text{ m} + 0.171\text{ m} = 1.671\text{ m} y p , hinge ​ = 2 L ​ + e = 1.50 m + 0.171 m = 1.671 m

Determine required normal opening force P P P :

Taking moments about the hinge: ∑ M hinge = 0 \sum M_{\text{hinge}} = 0 ∑ M hinge ​ = 0 P × L = F × y p , hinge P \times L = F \times y_{p,\text{hinge}} P × L = F × y p , hinge ​ P × ( 3.00 m ) = ( 223.61 kN ) ( 1.671 m ) = 373.65 kN ⋅ m P \times (3.00\text{ m}) = (223.61\text{ kN})(1.671\text{ m}) = 373.65\text{ kN}\cdot\text{m} P × ( 3.00 m ) = ( 223.61 kN ) ( 1.671 m ) = 373.65 kN ⋅ m P = 373.65 3.00 = 124.55 kN P = \frac{373.65}{3.00} = 124.55\text{ kN} P = 3.00 373.65 ​ = 124.55 kN

6. CELE Exam Traps & Common Computational Errors

Warning

Trap 1: Confusing Vertical Depth h ˉ \bar{h} h ˉ with Inclined Distance y ˉ \bar{y} y ˉ ​ : In the formula y p = y ˉ + I c g y ˉ A y_p = \bar{y} + \frac{I_{cg}}{\bar{y} A} y p ​ = y ˉ ​ + y ˉ ​ A I c g ​ ​ , y ˉ \bar{y} y ˉ ​ must be the distance measured along the inclined plane , not the vertical depth h ˉ \bar{h} h ˉ . Using h ˉ \bar{h} h ˉ directly in the denominator underestimates the eccentricity.

Warning

Trap 2: Ignoring Uplift in Sliding Checks: Uplift directly reduces the effective foundation normal contact reaction ( R y = ∑ W − U R_y = \sum W - U R y ​ = ∑ W − U ). Forgetting to subtract U U U when calculating frictional sliding resistance ( F resist = μ R y F_{\text{resist}} = \mu R_y F resist ​ = μ R y ​ ) dangerously overstates sliding stability.

Warning

Trap 3: Applying Symmetric Formula when e > B / 6 e > B/6 e > B /6 : If e > B / 6 e > B/6 e > B /6 , calculating heel pressure via q = R y B ( 1 − 6 e B ) q = \frac{R_y}{B}(1 - \frac{6e}{B}) q = B R y ​ ​ ( 1 − B 6 e ​ ) gives a negative value, implying foundation tension. Examinees must switch to q max = 2 R y 3 x ˉ q_{\text{max}} = \frac{2 R_y}{3 \bar{x}} q max ​ = 3 x ˉ 2 R y ​ ​ .

Loading diagram... Resolution of Hydrostatic Forces on Plane and Curved Surfaces