Study guide
5.4 Transportation Planning, Network Analysis, and Intermodal Systems
PRC Civil Engineer Licensure Examination CELE
Track your progress as you read
Finished sections get a check mark.
1 Chapter 1: Examination Overview, RA 544 & Professional Practice
1.1 CELE Structure, Format, Scoring, and 2026 Subject Order 1.2 Republic Act No. 544: The Civil Engineering Law and Board Regulations 1.3 Civil Engineering Ethics, Contracts, and Professional Practice
2 Chapter 2: Engineering Mathematics, Numerical Methods & Physics
2.1 Advanced Algebra, Progressions & Word Problems 2.2 Trigonometry and Analytical Geometry 2.3 Differential and Integral Calculus 2.4 Differential Equations and Numerical Methods 2.5 Series, Hyperbolic Functions, Multivariable Calculus, and Laplace Transforms 2.6 Numerical Methods: Linear Systems, Interpolation, Curve Fitting, and ODE Solvers 2.7 Physics for Engineers: Kinematics, Newton's Laws, Work-Energy, and Momentum
3 Chapter 3: Engineering Data Analysis & Engineering Economy
3.1 Engineering Data Analysis and Statistical Applications 3.2 Parameter Estimation, Linear Regression, Correlation, and Queuing Models 3.3 Engineering Economy: Time Value of Money and Interest Formulas 3.4 Project Evaluation, Depreciation, and Benefit-Cost Analysis
4 Chapter 4: Surveying Fundamentals, Construction Layout & Route Surveying
4.1 Errors, Corrections, and Pacing/Taping 4.2 Leveling, Earthworks, and Mass Haul Diagrams 4.3 Traverse Computations, Balancing, and Area Determinations 4.4 Route Surveying: Horizontal and Vertical Curves
5 Chapter 5: Highway & Transportation Engineering
5.1 Highway Geometric Design and Sight Distances 5.2 Traffic Engineering, Flow Fundamentals, and Pavement Design 5.3 Highway Policy, Route Location, Drainage, and Earthwork Slopes 5.4 Transportation Planning, Network Analysis, and Intermodal Systems
6 Chapter 6: Construction Materials, Methods, Management & Safety
6.1 Materials for Construction: Concrete, Formwork, Masonry, Steel, and Wood Products 6.2 Construction Equipment, Formwork, and Construction Methods 6.3 Construction Occupational Safety and Health: RA 11058 and DOLE DO 13 6.4 Construction Project Management, CPM/PERT, and Resource Scheduling 6.5 Construction Principles: Design Requirements, Project Organization, Cost Control, and Value Engineering 6.6 Quantity Surveying, Unit Cost Analysis, and Project Cost Estimates 6.7 Construction Trades and Specialties: Plumbing, Plastics, Doors and Windows, Finishes, and Electrical
7 Chapter 7: Fluid Properties, Hydrostatics & Buoyancy
7.1 Fluid Properties, Units, and Pressure Measurement 7.2 Hydrostatic Pressure on Plane and Curved Surfaces 7.3 Buoyancy, Flotation, and Accelerated Fluid Masses
8 Chapter 8: Hydrodynamics, Pipe Flow, Open Channels & Water Supply
8.1 Fluid Dynamics: Continuity and Energy Equations 8.2 Flow Measurement: Orifices, Weirs, and Venturi Meters 8.3 Fluid Flow in Pipes, Friction Losses, and Pipe Networks 8.4 Open Channel Flow, Manning's Equation, and Hydraulic Jump 8.5 Water Supply: Demand, Storage, Pumping, Distribution, and Treatment
9 Chapter 9: Soil Properties, Seepage & Stresses in Soil Mass
9.1 Soil Composition, Weight-Volume Phase Relationships 9.2 Soil Classification Systems (USCS & AASHTO) and Atterberg Limits 9.3 Soil Permeability, Seepage, Flow Nets, and Effective Stress 9.4 Stresses in Soil Mass, Stress Distribution, and Immediate and Secondary Settlement
10 Chapter 10: Consolidation, Soil Strength, Earth Pressures & Foundations
10.1 Soil Compaction and Soil Compressibility/Consolidation 10.2 Shear Strength of Soils and Mohr-Coulomb Failure Criteria 10.3 Lateral Earth Pressures (Rankine & Coulomb) and Retaining Walls 10.4 Shallow and Deep Foundation Bearing Capacity and Slope Stability
11 Chapter 11: Engineering Mechanics & Statics
11.1 Force Systems, Resultants, and Equilibrium of Rigid Bodies 11.2 Centroids, Moments of Inertia, and Friction 11.3 Cables, Trusses, and Internal Forces in Members
12 Chapter 12: Strength of Materials
12.1 Axial Stress, Strain, and Deformation 12.2 Torsion, Flanged Bolt Couplings, and Thin-Walled Pressure Vessels 12.3 Beam Stresses: Flexural and Transverse Shear 12.4 Beam Deflections, Combined Stresses, and Mohr's Circle
13 Chapter 13: Structural Analysis & NSCP Load Criteria
13.1 Indeterminate Structures: Approximate and Classical Methods 13.2 Moment Distribution Method and Slope Deflection 13.3 Influence Lines for Determinate and Indeterminate Structures 13.4 NSCP Minimum Design Loads: Dead, Live, Wind, and Earthquake
14 Chapter 14: Reinforced Concrete Design (NSCP 2015 / USD)
14.1 Ultimate Strength Design (USD) Principles and Singly Reinforced Beams 14.2 Doubly Reinforced Beams and T-Beams 14.3 Shear and Diagonal Tension, Stirrup Design, and Development Length 14.4 Reinforced Concrete Columns and Isolated Footing Design
15 Chapter 15: Steel, Timber & Prestressed Design and Materials Testing
15.1 Structural Steel Tension Members and Connections 15.2 Structural Steel Compression Members and Beam Design 15.3 Timber Design Principles, Working Stress, and Sawn Lumber Beams 15.4 Prestressed Concrete Fundamentals and Prestress Losses 15.5 Construction Materials Testing and Concrete Mix Proportioning
5.4 Transportation Planning, Network Analysis, and Intermodal Systems
Key Takeaways Explain This Topic AI
The four-step travel demand model runs trip generation, trip distribution, mode choice and traffic assignment, in that order.
The gravity model distributes trips in proportion to zone attractions and inversely with a travel-impedance function.
In a multinomial logit model, the share of mode m equals e^(U_m) divided by the sum of e^(U) over all available modes.
Under Wardrop's user-equilibrium principle, all used routes between an origin and destination have equal and minimum travel time.
Intermodal transport moves people or freight through more than one mode, so transfer terminals often control total trip time and cost.
Last updated: October 2026
5.4 Transportation Planning, Network Analysis, and Intermodal Systems
The AMSTHC TOS area "Transportation Engineering" has these competencies:
Review concepts in urban transportation planning.
Analyze networks.
Perform quantitative methods for transportation engineering.
Evaluate and assess intermodal transportation networks.
Understand methods used to prepare cost estimates. This one repeats a quantity-surveying line and is covered in Section 6.6.
Traffic-flow quantitative methods are in Section 5.2. This section covers planning and networks.
The Urban Transportation Planning Process
Transportation planning asks how many trips will be made, between which places, by which modes and on which routes. The classic four-step model answers these questions in sequence:
Step Question Typical method
1. Trip generation How many trips start or end in each zone? Regression on population, households, employment, or cross-classification by household type
- 2. Trip distribution Where do the trips go? Gravity model
- 3. Mode choice Which mode is used? Logit model based on time and cost
- 4. Traffic assignment Which route is used? All-or-nothing, incremental, or equilibrium assignment
The study area is divided into traffic analysis zones . Travel is summarized in an origin-destination (O-D) matrix . Data come from household interview surveys, roadside O-D surveys, traffic counts and land-use forecasts.
Trip Generation
Productions ( P i P_i P i ) are trips generated by homes. Attractions ( A j A_j A j ) are trips drawn by jobs, schools and shops.
Example. A regression model is P = 0.5 + 1.2 ( household size ) + 0.8 ( cars owned ) P = 0.5 + 1.2(\text{household size}) + 0.8(\text{cars owned}) P = 0.5 + 1.2 ( household size ) + 0.8 ( cars owned ) daily trips per household. For 1,000 households averaging 4.5 persons and 0.5 car, zone productions are:
1,000 ( 0.5 + 5.4 + 0.4 ) = 6,300 trips/day 1{,}000(0.5 + 5.4 + 0.4) = 6{,}300 \text{ trips/day} 1 , 000 ( 0.5 + 5.4 + 0.4 ) = 6 , 300 trips/day
Total productions and attractions are then balanced so that the region's totals match.
Trip Distribution: The Gravity Model
T i j = P i A j F i j K i j ∑ j A j F i j K i j T_{ij} = P_i \frac{A_j F_{ij} K_{ij}}{\sum_j A_j F_{ij} K_{ij}} T ij = P i ∑ j A j F ij K ij A j F ij K ij
F i j F_{ij} F ij is a friction factor that decreases with travel time or cost, for example F = t − b F = t^{-b} F = t − b .
K i j K_{ij} K ij is an adjustment factor, often set to 1.
Example. Zone 1 produces 1,000 trips. Zone A attracts 600 trips at t = 10 min t = 10\text{ min} t = 10 min ; zone B attracts 400 trips at t = 20 min t = 20\text{ min} t = 20 min . Use F = t − 2 F = t^{-2} F = t − 2 .
Weights: 600 / 100 = 6.0 600/100 = 6.0 600/100 = 6.0 and 400 / 400 = 1.0 400/400 = 1.0 400/400 = 1.0 .
T 1 A = 1,000 ( 6 / 7 ) = 857 T_{1A} = 1{,}000(6/7) = 857 T 1 A = 1 , 000 ( 6/7 ) = 857 trips and T 1 B = 143 T_{1B} = 143 T 1 B = 143 trips.
Nearer, larger attractions get most of the trips.
Mode Choice: The Logit Model
Each mode m m m has a utility U m U_m U m , usually a linear function of travel time, cost and comfort, with negative coefficients on time and cost. The multinomial logit share is:
P m = e U m ∑ k e U k P_m = \frac{e^{U_m}}{\sum_k e^{U_k}} P m = ∑ k e U k e U m
Example. U car = − 0.05 ( 30 ) − 0.02 ( 80 ) = − 3.10 U_{\text{car}} = -0.05(30) - 0.02(80) = -3.10 U car = − 0.05 ( 30 ) − 0.02 ( 80 ) = − 3.10 and U bus = − 0.05 ( 45 ) − 0.02 ( 15 ) = − 2.55 U_{\text{bus}} = -0.05(45) - 0.02(15) = -2.55 U bus = − 0.05 ( 45 ) − 0.02 ( 15 ) = − 2.55 .
e − 3.10 = 0.0450 e^{-3.10} = 0.0450 e − 3.10 = 0.0450 and e − 2.55 = 0.0781 e^{-2.55} = 0.0781 e − 2.55 = 0.0781 .
Bus share = 0.0781 / ( 0.0450 + 0.0781 ) = 0.634 = 0.0781/(0.0450 + 0.0781) = 0.634 = 0.0781/ ( 0.0450 + 0.0781 ) = 0.634 , or 63%.
Network Analysis and Assignment
A transport network is a set of nodes (intersections, terminals) and links (road segments) with costs such as travel time.
Shortest path (Dijkstra's algorithm)
Give the origin a label of 0 and every other node a label of infinity.
Repeatedly make permanent the node with the smallest temporary label.
Update the labels of its neighbors: new label = permanent label + link time, if that is smaller.
Stop when the destination is permanent, and trace back the predecessor nodes.
Example. Links: A–B 4 min, A–C 2, C–B 1, B–D 5, C–D 8.
From A: C = 2 is permanent; B = min(4, 2 + 1) = 3 is permanent.
D = min(3 + 5, 2 + 8) = 8.
The shortest path is A–C–B–D in 8 minutes.
Assignment methods
All-or-nothing. All trips between two zones take the shortest path. This ignores congestion.
User equilibrium (Wardrop's first principle). Each traveler picks the quickest route, so in equilibrium all used routes between an O-D pair have equal and minimum travel times. Link travel times rise with volume, for example through the BPR function t = t 0 [ 1 + 0.15 ( v / c ) 4 ] t = t_0[1 + 0.15(v/c)^4] t = t 0 [ 1 + 0.15 ( v / c ) 4 ] .
System optimum (Wardrop's second principle). The total travel time of all users is minimized. It may require some users to take slower routes, so it is a benchmark for traffic management and pricing.
Equilibrium example. Two routes carry 1,000 veh/h, with t 1 = 10 + 0.01 x 1 t_1 = 10 + 0.01x_1 t 1 = 10 + 0.01 x 1 and t 2 = 15 + 0.005 x 2 t_2 = 15 + 0.005x_2 t 2 = 15 + 0.005 x 2 minutes. Setting t 1 = t 2 t_1 = t_2 t 1 = t 2 with x 1 + x 2 = 1,000 x_1 + x_2 = 1{,}000 x 1 + x 2 = 1 , 000 :
10 + 0.01 x 1 = 15 + 0.005 ( 1,000 − x 1 ) ⟹ 0.015 x 1 = 10 ⟹ x 1 = 667 10 + 0.01x_1 = 15 + 0.005(1{,}000 - x_1) \implies 0.015x_1 = 10 \implies x_1 = 667 10 + 0.01 x 1 = 15 + 0.005 ( 1 , 000 − x 1 ) ⟹ 0.015 x 1 = 10 ⟹ x 1 = 667
So x 2 = 333 x_2 = 333 x 2 = 333 , and both routes take 16.67 min 16.67\text{ min} 16.67 min .
Intermodal Transportation Networks
Intermodal transport uses more than one mode for a single trip or shipment. Examples are jeepney to rail to walk, or truck to port to ship to truck. Total performance depends on the links and also on the transfer points .
Component Planning concerns
Ports (Roll-on/Roll-off and container) Berth capacity, crane productivity, yard space, landside road and rail access
- Airports Runway capacity, terminal processing, ground access
- Rail and bus rapid transit Station spacing, headways, capacity per hour per direction, feeder access
- Bus and jeepney terminals Bay capacity, dwell time, pedestrian access to other modes
- Freight logistics hubs Truck staging, warehousing, customs and inspection
Key measures:
Door-to-door time includes access, waiting, in-vehicle and transfer times.
Generalized cost combines money cost with time valued in pesos per hour.
Reliability reflects variability of travel time.
Good intermodal design minimizes transfer penalties: short walking distances, coordinated schedules, integrated fares, and protected waiting areas.