Study guide
8.1 Fluid Dynamics: Continuity and Energy Equations
PRC Civil Engineer Licensure Examination CELE
Track your progress as you read
Finished sections get a check mark.
1 Chapter 1: Examination Overview, RA 544 & Professional Practice
1.1 CELE Structure, Format, Scoring, and 2026 Subject Order 1.2 Republic Act No. 544: The Civil Engineering Law and Board Regulations 1.3 Civil Engineering Ethics, Contracts, and Professional Practice
2 Chapter 2: Engineering Mathematics, Numerical Methods & Physics
2.1 Advanced Algebra, Progressions & Word Problems 2.2 Trigonometry and Analytical Geometry 2.3 Differential and Integral Calculus 2.4 Differential Equations and Numerical Methods 2.5 Series, Hyperbolic Functions, Multivariable Calculus, and Laplace Transforms 2.6 Numerical Methods: Linear Systems, Interpolation, Curve Fitting, and ODE Solvers 2.7 Physics for Engineers: Kinematics, Newton's Laws, Work-Energy, and Momentum
3 Chapter 3: Engineering Data Analysis & Engineering Economy
3.1 Engineering Data Analysis and Statistical Applications 3.2 Parameter Estimation, Linear Regression, Correlation, and Queuing Models 3.3 Engineering Economy: Time Value of Money and Interest Formulas 3.4 Project Evaluation, Depreciation, and Benefit-Cost Analysis
4 Chapter 4: Surveying Fundamentals, Construction Layout & Route Surveying
4.1 Errors, Corrections, and Pacing/Taping 4.2 Leveling, Earthworks, and Mass Haul Diagrams 4.3 Traverse Computations, Balancing, and Area Determinations 4.4 Route Surveying: Horizontal and Vertical Curves
5 Chapter 5: Highway & Transportation Engineering
5.1 Highway Geometric Design and Sight Distances 5.2 Traffic Engineering, Flow Fundamentals, and Pavement Design 5.3 Highway Policy, Route Location, Drainage, and Earthwork Slopes 5.4 Transportation Planning, Network Analysis, and Intermodal Systems
6 Chapter 6: Construction Materials, Methods, Management & Safety
6.1 Materials for Construction: Concrete, Formwork, Masonry, Steel, and Wood Products 6.2 Construction Equipment, Formwork, and Construction Methods 6.3 Construction Occupational Safety and Health: RA 11058 and DOLE DO 13 6.4 Construction Project Management, CPM/PERT, and Resource Scheduling 6.5 Construction Principles: Design Requirements, Project Organization, Cost Control, and Value Engineering 6.6 Quantity Surveying, Unit Cost Analysis, and Project Cost Estimates 6.7 Construction Trades and Specialties: Plumbing, Plastics, Doors and Windows, Finishes, and Electrical
7 Chapter 7: Fluid Properties, Hydrostatics & Buoyancy
7.1 Fluid Properties, Units, and Pressure Measurement 7.2 Hydrostatic Pressure on Plane and Curved Surfaces 7.3 Buoyancy, Flotation, and Accelerated Fluid Masses
8 Chapter 8: Hydrodynamics, Pipe Flow, Open Channels & Water Supply
8.1 Fluid Dynamics: Continuity and Energy Equations 8.2 Flow Measurement: Orifices, Weirs, and Venturi Meters 8.3 Fluid Flow in Pipes, Friction Losses, and Pipe Networks 8.4 Open Channel Flow, Manning's Equation, and Hydraulic Jump 8.5 Water Supply: Demand, Storage, Pumping, Distribution, and Treatment
9 Chapter 9: Soil Properties, Seepage & Stresses in Soil Mass
9.1 Soil Composition, Weight-Volume Phase Relationships 9.2 Soil Classification Systems (USCS & AASHTO) and Atterberg Limits 9.3 Soil Permeability, Seepage, Flow Nets, and Effective Stress 9.4 Stresses in Soil Mass, Stress Distribution, and Immediate and Secondary Settlement
10 Chapter 10: Consolidation, Soil Strength, Earth Pressures & Foundations
10.1 Soil Compaction and Soil Compressibility/Consolidation 10.2 Shear Strength of Soils and Mohr-Coulomb Failure Criteria 10.3 Lateral Earth Pressures (Rankine & Coulomb) and Retaining Walls 10.4 Shallow and Deep Foundation Bearing Capacity and Slope Stability
11 Chapter 11: Engineering Mechanics & Statics
11.1 Force Systems, Resultants, and Equilibrium of Rigid Bodies 11.2 Centroids, Moments of Inertia, and Friction 11.3 Cables, Trusses, and Internal Forces in Members
12 Chapter 12: Strength of Materials
12.1 Axial Stress, Strain, and Deformation 12.2 Torsion, Flanged Bolt Couplings, and Thin-Walled Pressure Vessels 12.3 Beam Stresses: Flexural and Transverse Shear 12.4 Beam Deflections, Combined Stresses, and Mohr's Circle
13 Chapter 13: Structural Analysis & NSCP Load Criteria
13.1 Indeterminate Structures: Approximate and Classical Methods 13.2 Moment Distribution Method and Slope Deflection 13.3 Influence Lines for Determinate and Indeterminate Structures 13.4 NSCP Minimum Design Loads: Dead, Live, Wind, and Earthquake
14 Chapter 14: Reinforced Concrete Design (NSCP 2015 / USD)
14.1 Ultimate Strength Design (USD) Principles and Singly Reinforced Beams 14.2 Doubly Reinforced Beams and T-Beams 14.3 Shear and Diagonal Tension, Stirrup Design, and Development Length 14.4 Reinforced Concrete Columns and Isolated Footing Design
15 Chapter 15: Steel, Timber & Prestressed Design and Materials Testing
15.1 Structural Steel Tension Members and Connections 15.2 Structural Steel Compression Members and Beam Design 15.3 Timber Design Principles, Working Stress, and Sawn Lumber Beams 15.4 Prestressed Concrete Fundamentals and Prestress Losses 15.5 Construction Materials Testing and Concrete Mix Proportioning
8.1 Fluid Dynamics: Continuity and Energy Equations
Key Takeaways Explain This Topic AI
Fluid flow regimes are classified by temporal constancy (steady vs unsteady), spatial constancy along streamlines (uniform vs non-uniform), viscous shear stability (laminar vs turbulent), and vorticity (rotational vs irrotational).
The Continuity Equation enforces conservation of mass: for steady one-dimensional flow of an incompressible fluid ( ρ = constant \rho = \text{constant} ρ = constant ), volumetric flow rate remains constant across all cross-sections: Q = A 1 v 1 = A 2 v 2 Q = A_1 v_1 = A_2 v_2 Q = A 1 v 1 = A 2 v 2 .
Total energy head along a streamline is the sum of elevation head ( z z z ), pressure head ( P / γ P/\gamma P / γ ), and velocity head ( α v 2 / ( 2 g ) \alpha v^2 / (2g) α v 2 / ( 2 g ) ), where the Coriolis kinetic energy correction factor α \alpha α is 2.0 for fully developed laminar flow and approximately 1.01 to 1.05 for turbulent flow.
The Extended Energy Equation balances mechanical energy across flow stations: z 1 + P 1 / γ + v 1 2 / ( 2 g ) + H p − H t − h L = z 2 + P 2 / γ + v 2 2 / ( 2 g ) z_1 + P_1/\gamma + v_1^2/(2g) + H_p - H_t - h_L = z_2 + P_2/\gamma + v_2^2/(2g) z 1 + P 1 / γ + v 1 2 / ( 2 g ) + H p − H t − h L = z 2 + P 2 / γ + v 2 2 / ( 2 g ) , where pump head H p H_p H p adds energy ( Power in = Q γ H p / η \text{Power}_{\text{in}} = Q\gamma H_p / \eta Power in = Q γ H p / η ), turbine head H t H_t H t extracts energy ( Power out = Q γ H t η \text{Power}_{\text{out}} = Q\gamma H_t \eta Power out = Q γ H t η ), and h L h_L h L accounts for total frictional and minor head loss.
The Hydraulic Grade Line (HGL: z + P / γ z + P/\gamma z + P / γ ) runs parallel below the Energy Grade Line (EGL) by the velocity head v 2 / ( 2 g ) v^2/(2g) v 2 / ( 2 g ) ; whenever the conduit profile rises above the HGL, sub-atmospheric (vacuum) gauge pressure occurs, creating a severe cavitation hazard if absolute pressure drops to water vapor pressure ( P v ≈ 2.34 kPa abs P_v \approx 2.34\text{ kPa abs} P v ≈ 2.34 kPa abs at 20°C, corresponding to -10.1 m of water gauge).
Last updated: October 2026
8.1 Fluid Dynamics: Continuity and Energy Equations
In fluid mechanics, fluid dynamics investigates fluids in motion under the action of unbalanced body and surface forces. In the Philippine Civil Engineering Licensure Examination (CELE), fluid dynamics, closed conduit flow, and open channel hydraulics represent major quantitative components of the Hydraulics and Principles of Geotechnical Engineering (HGE) syllabus. Mastery of these topics requires a firm grasp of the fundamental conservation laws: conservation of mass (Continuity Equation), conservation of energy (First Law of Thermodynamics / Extended Bernoulli Equation), and conservation of linear momentum.
1. Flow Classifications and Streamline Kinematics
To analyze a moving fluid, engineers classify the velocity vector field v ⃗ ( x , y , z , t ) \vec{v}(x, y, z, t) v ( x , y , z , t ) according to its variation across time and space:
Classification Mathematical Criterion Physical Meaning / Practical Example
Steady Flow ∂ v ⃗ ∂ t = 0 , ∂ P ∂ t = 0 , ∂ ρ ∂ t = 0 \frac{\partial \vec{v}}{\partial t} = 0, \; \frac{\partial P}{\partial t} = 0, \; \frac{\partial \rho}{\partial t} = 0 ∂ t ∂ v = 0 , ∂ t ∂ P = 0 , ∂ t ∂ ρ = 0 Velocity, pressure, and density at any fixed point remain invariant over time (e.g., constant outflow from a regulated reservoir).
Unsteady Flow ∂ v ⃗ ∂ t ≠ 0 \frac{\partial \vec{v}}{\partial t} \ne 0 ∂ t ∂ v = 0 Fluid properties at a fixed spatial point change over time (e.g., water hammer pressure surges, draining a tank under falling head).
Uniform Flow ∂ v ⃗ ∂ s = 0 \frac{\partial \vec{v}}{\partial s} = 0 ∂ s ∂ v = 0 Velocity vector (magnitude and direction) remains constant along a streamline at any instant (e.g., flow in a straight prismatic canal of constant cross-section).
Non-Uniform Flow ∂ v ⃗ ∂ s ≠ 0 \frac{\partial \vec{v}}{\partial s} \ne 0 ∂ s ∂ v = 0 Velocity changes along the path of flow due to changing cross-sectional area or alignment (e.g., flow through a pipe reducer or over a spillway).
Laminar Flow Low Reynolds number ( R e < 2000 Re < 2000 R e < 2000 in pipes) Fluid moves in smooth, parallel laminas or layers without macroscopic mixing; viscous shear stresses dominate.
Turbulent Flow High Reynolds number ( R e > 4000 Re > 4000 R e > 4000 in pipes) Fluid particles move in chaotic, erratic three-dimensional eddy trajectories; momentum exchange dominates.
Rotational Flow curl v ⃗ = ∇ × v ⃗ ≠ 0 \text{curl } \vec{v} = \nabla \times \vec{v} \ne 0 curl v = ∇ × v = 0 Fluid elements rotate about their own mass centers while translating (vorticity ω ⃗ ≠ 0 \vec{\omega} \ne 0 ω = 0 ).
Irrotational Flow curl v ⃗ = ∇ × v ⃗ = 0 \text{curl } \vec{v} = \nabla \times \vec{v} = 0 curl v = ∇ × v = 0 Fluid elements undergo deformation and translation without angular rotation (potential flow).
Streamlines, Pathlines, and Streaklines
Streamline: An imaginary continuous curve drawn through a flowing fluid such that the velocity vector of fluid particles at every point along the curve is tangent to it at that instant ( d x / u = d y / v = d z / w dx/u = dy/v = dz/w d x / u = d y / v = d z / w ). Because velocity is tangent, no fluid can cross a streamline .
Pathline: The actual trajectory traced by an individual fluid particle over a period of time (Lagrangian description).
Streakline: The instantaneous locus of all fluid particles that have previously passed through a specific common injection point (e.g., dye injected continuously from a fixed needle).
Under steady flow conditions , streamlines, pathlines, and streaklines are completely identical .
2. Conservation of Mass: The Continuity Equation
For a control volume bounded by a control surface, conservation of mass dictates that the net mass flux exiting through the control surface equals the time rate of mass decrease within the control volume.
Volumetric and Mass Flow Rate
For a cross-section of area A A A with a local velocity profile v n v_n v n perpendicular to d A dA d A : Volumetric Flow Rate: Q = ∫ A v n d A = A v \text{Volumetric Flow Rate: } Q = \int_A v_n \, dA = A v Volumetric Flow Rate: Q = ∫ A v n d A = A v Mass Flow Rate: m ˙ = ∫ A ρ v n d A = ρ A v = ρ Q \text{Mass Flow Rate: } \dot{m} = \int_A \rho v_n \, dA = \rho A v = \rho Q Mass Flow Rate: m ˙ = ∫ A ρ v n d A = ρ A v = ρQ where v = v avg v = v_{\text{avg}} v = v avg is the area-weighted mean velocity ( m/s \text{m/s} m/s ), A A A is the flow area ( m 2 \text{m}^2 m 2 ), ρ \rho ρ is mass density ( kg/m 3 \text{kg/m}^3 kg/m 3 ), and Q Q Q is discharge ( m 3 / s \text{m}^3/\text{s} m 3 / s or L/s \text{L/s} L/s , where 1 m 3 / s = 1 , 000 L/s 1\text{ m}^3/\text{s} = 1,000\text{ L/s} 1 m 3 / s = 1 , 000 L/s ). The weight flow rate is W f = γ Q = ρ g Q W_f = \gamma Q = \rho g Q W f = γ Q = ρ g Q ( N/s \text{N/s} N/s or kN/s \text{kN/s} kN/s ).
One-Dimensional Continuity for Incompressible Flow
For steady flow of an incompressible fluid ( ρ 1 = ρ 2 = constant \rho_1 = \rho_2 = \text{constant} ρ 1 = ρ 2 = constant ): ρ 1 A 1 v 1 = ρ 2 A 2 v 2 ⟹ A 1 v 1 = A 2 v 2 = Q = constant \rho_1 A_1 v_1 = \rho_2 A_2 v_2 \implies A_1 v_1 = A_2 v_2 = Q = \text{constant} ρ 1 A 1 v 1 = ρ 2 A 2 v 2 ⟹ A 1 v 1 = A 2 v 2 = Q = constant For circular pipes of internal diameter D 1 D_1 D 1 and D 2 D_2 D 2 : π D 1 2 4 v 1 = π D 2 2 4 v 2 ⟹ v 2 = v 1 ( D 1 D 2 ) 2 \frac{\pi D_1^2}{4} v_1 = \frac{\pi D_2^2}{4} v_2 \implies v_2 = v_1 \left(\frac{D_1}{D_2}\right)^2 4 π D 1 2 v 1 = 4 π D 2 2 v 2 ⟹ v 2 = v 1 ( D 2 D 1 ) 2 For a branching pipe junction with m m m incoming conduits and n n n outgoing conduits: ∑ i = 1 m Q in , i = ∑ j = 1 n Q out , j \sum_{i=1}^m Q_{\text{in}, i} = \sum_{j=1}^n Q_{\text{out}, j} ∑ i = 1 m Q in , i = ∑ j = 1 n Q out , j
3. Total Energy Head and Bernoulli's Theorem
Consider an elemental fluid prism moving along a streamline in steady, frictionless (inviscid) flow. Integrating Euler's equation of motion along the streamline yields Bernoulli's Theorem .
Components of Fluid Energy Head
Every unit weight of a flowing fluid possesses three distinct mechanical energy components, each expressed in linear dimensions of length (meters of fluid):
Elevation (Potential) Head ( z z z ): Energy of position above an arbitrary horizontal datum plane (meters, m \text{m} m ).
Pressure Head ( P γ \frac{P}{\gamma} γ P ): Energy stored in the fluid due to static hydrostatic pressure P P P relative to specific weight γ = ρ g \gamma = \rho g γ = ρ g (meters, m \text{m} m ).
Velocity (Kinetic) Head ( α v 2 2 g \alpha \frac{v^2}{2g} α 2 g v 2 ): Kinetic energy per unit weight of fluid moving at average velocity v v v (meters, m \text{m} m ).
The Coriolis Kinetic Energy Correction Factor ( α \alpha α )
Because the true velocity profile across a conduit is non-uniform (zero at the pipe wall, maximum at centerline), the actual integrated kinetic energy exceeds v avg 2 2 g \frac{v_{\text{avg}}^2}{2g} 2 g v avg 2 . The kinetic energy correction factor α \alpha α is defined as: α = 1 A v 3 ∫ A u 3 d A \alpha = \frac{1}{A v^3} \int_A u^3 \, dA α = A v 3 1 ∫ A u 3 d A
Laminar pipe flow (parabolic profile): α = 2.0 \alpha = 2.0 α = 2.0 .
Turbulent pipe flow (logarithmic profile): α ≈ 1.01 to 1.05 \alpha \approx 1.01\text{ to }1.05 α ≈ 1.01 to 1.05 . In civil engineering licensure calculations, α \alpha α is taken as 1.0 1.0 1.0 for turbulent flow unless explicitly instructed otherwise.
Classical Bernoulli Equation (Ideal / Frictionless Flow)
Between any two sections 1 and 2 along a streamline in steady, incompressible, frictionless flow: z 1 + P 1 γ + v 1 2 2 g = z 2 + P 2 γ + v 2 2 2 g = H = constant z_1 + \frac{P_1}{\gamma} + \frac{v_1^2}{2g} = z_2 + \frac{P_2}{\gamma} + \frac{v_2^2}{2g} = H = \text{constant} z 1 + γ P 1 + 2 g v 1 2 = z 2 + γ P 2 + 2 g v 2 2 = H = constant where H H H is the total mechanical energy head.
4. The Extended Energy Equation: Pumps, Turbines, and Head Losses
Real engineering hydraulic systems experience energy inputs from mechanical pumps, energy extractions from turbines, and irreversibilities due to boundary shear friction and turbulence.
z 1 + P 1 γ + α 1 v 1 2 2 g + H p − H t − h L = z 2 + P 2 γ + α 2 v 2 2 2 g \boxed{z_1 + \frac{P_1}{\gamma} + \alpha_1 \frac{v_1^2}{2g} + H_p - H_t - h_L = z_2 + \frac{P_2}{\gamma} + \alpha_2 \frac{v_2^2}{2g}} z 1 + γ P 1 + α 1 2 g v 1 2 + H p − H t − h L = z 2 + γ P 2 + α 2 2 g v 2 2
Mechanical Energy Devices and Power Formulations
Pumps ( H p H_p H p ): A pump adds mechanical energy head H p H_p H p ( m \text{m} m ) to the fluid, raising its pressure and/or elevation.
Water (Fluid) Power Output: The rate of useful energy transferred to the liquid: P water = Q γ H p = ρ g Q H p ( Watts or kW ) P_{\text{water}} = Q \gamma H_p = \rho g Q H_p \quad (\text{Watts or kW}) P water = Q γ H p = ρ g Q H p ( Watts or kW )
Brake (Input) Shaft Power: The mechanical power required to drive the pump shaft, considering pump efficiency η p < 1.0 \eta_p < 1.0 η p < 1.0 : P input = Q γ H p η p P_{\text{input}} = \frac{Q \gamma H_p}{\eta_p} P input = η p Q γ H p (For Q Q Q in m 3 / s \text{m}^3/\text{s} m 3 / s , γ \gamma γ in kN/m 3 \text{kN/m}^3 kN/m 3 , and H p H_p H p in m \text{m} m , P input P_{\text{input}} P input is in kW \text{kW} kW . In Imperial units: HP = Q γ H p 550 η \text{HP} = \frac{Q \gamma H_p}{550 \eta} HP = 550 η Q γ H p , with Q Q Q in ft 3 / s \text{ft}^3/\text{s} ft 3 / s and γ = 62.4 lb/ft 3 \gamma = 62.4\text{ lb/ft}^3 γ = 62.4 lb/ft 3 ).
Turbines ( H t H_t H t ): A hydraulic turbine extracts energy head H t H_t H t ( m \text{m} m ) from the fluid to generate electrical power.
Power Extracted from Fluid: P fluid = Q γ H t P_{\text{fluid}} = Q \gamma H_t P fluid = Q γ H t .
Delivered Output Power: The electrical/mechanical power produced, considering turbine efficiency η t < 1.0 \eta_t < 1.0 η t < 1.0 : P output = Q γ H t η t P_{\text{output}} = Q \gamma H_t \eta_t P output = Q γ H t η t
Total Head Loss ( h L h_L h L ): Head lost between sections 1 and 2, consisting of pipe wall friction loss ( h f h_f h f ) and minor fitting losses ( h m h_m h m ): h L = h f + ∑ h m h_L = h_f + \sum h_m h L = h f + ∑ h m
5. Hydraulic Grade Line (HGL) and Energy Grade Line (EGL)
The graphical representation of energy along a hydraulic conduit provides vital diagnostic insight into operational pressures and vacuum zones.
Line Mathematical Formulation Physical Significance
Energy Grade Line (EGL) EGL = z + P γ + v 2 2 g \text{EGL} = z + \frac{P}{\gamma} + \frac{v^2}{2g} EGL = z + γ P + 2 g v 2 Represents total mechanical head available to the fluid at each station relative to datum.
Hydraulic Grade Line (HGL) HGL = z + P γ \text{HGL} = z + \frac{P}{\gamma} HGL = z + γ P Represents the piezometric head—the height to which liquid would rise in a vertical piezometer tube.
Fundamental Geometric Rules for EGL and HGL
Vertical Separation: The EGL always lies vertically above the HGL by exactly the velocity head v 2 2 g \frac{v^2}{2g} 2 g v 2 . Where the velocity is zero (such as in large storage reservoirs), the EGL and HGL coincide at the free liquid surface.
Frictional Slope: In passive conduits (no pumps), the EGL must always slope downward in the direction of flow at a hydraulic slope S f = d h f d L S_f = \frac{dh_f}{dL} S f = d L d h f .
Pump Discontinuity: A pump introduces an instantaneous vertical upward jump in both the EGL and HGL equal to the pump head H p H_p H p .
Turbine Discontinuity: A turbine introduces an instantaneous vertical downward drop in both lines equal to H t H_t H t .
Conduit Contraction: When pipe diameter decreases, velocity v v v increases, expanding the velocity head v 2 2 g \frac{v^2}{2g} 2 g v 2 . Consequently, the HGL drops sharply below the EGL.
Conduit Expansion: When pipe diameter increases, velocity v v v drops. If the reduction in velocity head exceeds the localized expansion head loss, the HGL experiences a localized rise, termed pressure recovery .
Sub-Atmospheric (Vacuum) Zones: If the physical pipe profile rises above the HGL , the gauge pressure head P γ = HGL − z pipe \frac{P}{\gamma} = \text{HGL} - z_{\text{pipe}} γ P = HGL − z pipe becomes negative (gauge vacuum).
6. Siphon Hydraulics and Cavitation Phenomena
A siphon is a closed conduit configured to convey liquid from an elevated reservoir over an intermediate topographic summit to a discharge point at lower elevation without mechanical pumping, relying on atmospheric pressure and gravity.
Loading diagram...
The Mechanism of Cavitation
At the summit of a functioning siphon, the physical elevation of the pipe invert ( z s z_s z s ) exceeds the Hydraulic Grade Line elevation ( HGL s \text{HGL}_s HGL s ), producing sub-atmospheric pressure: P s , gauge γ = HGL s − z s = z res − z s − v s 2 2 g − h L , 1 → s < 0 \frac{P_{s, \text{gauge}}}{\gamma} = \text{HGL}_s - z_s = z_{\text{res}} - z_s - \frac{v_s^2}{2g} - h_{L, 1\to s} < 0 γ P s , gauge = HGL s − z s = z res − z s − 2 g v s 2 − h L , 1 → s < 0 If this absolute pressure falls to the saturation vapor pressure of the liquid ( P v P_v P v ): P s , abs ≤ P v ⟹ P s , gauge γ ≤ P v − P atm γ P_{s, \text{abs}} \le P_v \implies \frac{P_{s, \text{gauge}}}{\gamma} \le \frac{P_v - P_{\text{atm}}}{\gamma} P s , abs ≤ P v ⟹ γ P s , gauge ≤ γ P v − P atm For water at standard ambient temperature ( 20 ∘ C 20^\circ\text{C} 2 0 ∘ C ), P v ≈ 2.34 kPa abs P_v \approx 2.34\text{ kPa abs} P v ≈ 2.34 kPa abs and P atm = 101.325 kPa P_{\text{atm}} = 101.325\text{ kPa} P atm = 101.325 kPa . The maximum permissible negative gauge pressure head before vapor formation is: ( P gauge γ ) limit = 2.34 − 101.325 9.81 = − 10.09 m of water \left(\frac{P_{\text{gauge}}}{\gamma}\right)_{\text{limit}} = \frac{2.34 - 101.325}{9.81} = -10.09\text{ m of water} ( γ P gauge ) limit = 9.81 2.34 − 101.325 = − 10.09 m of water When absolute pressure reaches P v P_v P v , the liquid boils at ambient temperature, generating vapor-filled bubbles ( vapor cavities ). As these vapor cavities travel into downstream zones of higher pressure, they collapse violently within microseconds, generating localized microjets and shockwave pressures exceeding 500 MPa 500\text{ MPa} 500 MPa . This causes severe pitting erosion, pipe wall fatigue failure, intense vibration, and immediate de-priming (air locking) of the siphon.
7. Worked Example: High-Lift Pumping Conduit Analysis
Problem Statement: A municipal water supply pumping station lifts water ( γ = 9.81 kN/m 3 \gamma = 9.81\text{ kN/m}^3 γ = 9.81 kN/m 3 ) from a suction well with water surface at Elev 18.00 m \text{Elev } 18.00\text{ m} Elev 18.00 m to a distribution reservoir with water surface at Elev 68.00 m \text{Elev } 68.00\text{ m} Elev 68.00 m . The system features:
Discharge rate: Q = 0.120 m 3 / s Q = 0.120\text{ m}^3/\text{s} Q = 0.120 m 3 / s ( 120 L/s 120\text{ L/s} 120 L/s ).
Total pipe length: L = 550 m L = 550\text{ m} L = 550 m of 300 mm 300\text{ mm} 300 mm internal diameter ductile iron pipe ( D = 0.300 m D = 0.300\text{ m} D = 0.300 m ).
Darcy-Weisbach friction factor: f = 0.020 f = 0.020 f = 0.020 .
Minor losses: square-edged entrance ( K e = 0.50 K_e = 0.50 K e = 0.50 ), four 90 ∘ 90^\circ 9 0 ∘ flanged bends ( K b = 4 × 0.35 = 1.40 K_b = 4 \times 0.35 = 1.40 K b = 4 × 0.35 = 1.40 ), one swing check valve ( K v = 2.50 K_v = 2.50 K v = 2.50 ), and submerged pipe exit into the reservoir ( K exit = 1.00 K_{\text{exit}} = 1.00 K exit = 1.00 ).
Combined pump-motor efficiency: η = 76 % \eta = 76\% η = 76% .
Determine (a) the velocity head in the pipe, (b) the total head loss, (c) the total dynamic head developed by the pump ( H p H_p H p ), and (d) the electrical input power required in kilowatts.
Step-by-Step Solution:
Calculate flow velocity and velocity head: A = π D 2 4 = π ( 0.300 m ) 2 4 = 0.070686 m 2 A = \frac{\pi D^2}{4} = \frac{\pi (0.300\text{ m})^2}{4} = 0.070686\text{ m}^2 A = 4 π D 2 = 4 π ( 0.300 m ) 2 = 0.070686 m 2 v = Q A = 0.120 m 3 / s 0.070686 m 2 = 1.6976 m/s v = \frac{Q}{A} = \frac{0.120\text{ m}^3/\text{s}}{0.070686\text{ m}^2} = 1.6976\text{ m/s} v = A Q = 0.070686 m 2 0.120 m 3 / s = 1.6976 m/s v 2 2 g = ( 1.6976 m/s ) 2 2 ( 9.81 m/s 2 ) = 2.8819 19.62 = 0.1469 m \frac{v^2}{2g} = \frac{(1.6976\text{ m/s})^2}{2(9.81\text{ m/s}^2)} = \frac{2.8819}{19.62} = 0.1469\text{ m} 2 g v 2 = 2 ( 9.81 m/s 2 ) ( 1.6976 m/s ) 2 = 19.62 2.8819 = 0.1469 m
Compute major friction head loss ( h f h_f h f ): h f = f L D v 2 2 g = ( 0.020 ) ( 550 m 0.300 m ) ( 0.1469 m ) = 36.667 × 0.1469 m = 5.386 m h_f = f \frac{L}{D} \frac{v^2}{2g} = (0.020) \left(\frac{550\text{ m}}{0.300\text{ m}}\right) (0.1469\text{ m}) = 36.667 \times 0.1469\text{ m} = 5.386\text{ m} h f = f D L 2 g v 2 = ( 0.020 ) ( 0.300 m 550 m ) ( 0.1469 m ) = 36.667 × 0.1469 m = 5.386 m
Compute minor head losses ( h m h_m h m ): ∑ K = K e + K b + K v + K exit = 0.50 + 1.40 + 2.50 + 1.00 = 5.40 \sum K = K_e + K_b + K_v + K_{\text{exit}} = 0.50 + 1.40 + 2.50 + 1.00 = 5.40 ∑ K = K e + K b + K v + K exit = 0.50 + 1.40 + 2.50 + 1.00 = 5.40 h m = ∑ K v 2 2 g = 5.40 × 0.1469 m = 0.793 m h_m = \sum K \frac{v^2}{2g} = 5.40 \times 0.1469\text{ m} = 0.793\text{ m} h m = ∑ K 2 g v 2 = 5.40 × 0.1469 m = 0.793 m Total Head Loss: h L = h f + h m = 5.386 + 0.793 = 6.179 m \text{Total Head Loss: } h_L = h_f + h_m = 5.386 + 0.793 = 6.179\text{ m} Total Head Loss: h L = h f + h m = 5.386 + 0.793 = 6.179 m
Apply Energy Equation between suction well surface (1) and upper reservoir surface (2): z 1 + P 1 γ + v 1 2 2 g + H p − h L = z 2 + P 2 γ + v 2 2 2 g z_1 + \frac{P_1}{\gamma} + \frac{v_1^2}{2g} + H_p - h_L = z_2 + \frac{P_2}{\gamma} + \frac{v_2^2}{2g} z 1 + γ P 1 + 2 g v 1 2 + H p − h L = z 2 + γ P 2 + 2 g v 2 2 Because both reservoirs are open to atmosphere, P 1 = P 2 = 0 kPa gauge P_1 = P_2 = 0\text{ kPa gauge} P 1 = P 2 = 0 kPa gauge . For large reservoirs, v 1 ≈ 0 v_1 \approx 0 v 1 ≈ 0 and v 2 ≈ 0 v_2 \approx 0 v 2 ≈ 0 . 18.00 + 0 + 0 + H p − 6.179 = 68.00 + 0 + 0 18.00 + 0 + 0 + H_p - 6.179 = 68.00 + 0 + 0 18.00 + 0 + 0 + H p − 6.179 = 68.00 + 0 + 0 H p = ( 68.00 − 18.00 ) + 6.179 = 50.00 + 6.179 = 56.18 m H_p = (68.00 - 18.00) + 6.179 = 50.00 + 6.179 = 56.18\text{ m} H p = ( 68.00 − 18.00 ) + 6.179 = 50.00 + 6.179 = 56.18 m
Compute Water Power and Electrical Input Power: P water = Q γ H p = ( 0.120 m 3 / s ) ( 9.81 kN/m 3 ) ( 56.179 m ) = 66.134 kW P_{\text{water}} = Q \gamma H_p = (0.120\text{ m}^3/\text{s})(9.81\text{ kN/m}^3)(56.179\text{ m}) = 66.134\text{ kW} P water = Q γ H p = ( 0.120 m 3 / s ) ( 9.81 kN/m 3 ) ( 56.179 m ) = 66.134 kW P input = P water η = 66.134 kW 0.76 = 87.02 kW P_{\text{input}} = \frac{P_{\text{water}}}{\eta} = \frac{66.134\text{ kW}}{0.76} = 87.02\text{ kW} P input = η P water = 0.76 66.134 kW = 87.02 kW
8. The Momentum Equation: Forces on Bends, Nozzles, Jets and Vanes
Energy equations give pressures and heads. The impulse-momentum principle gives the forces that moving water exerts on pipes, nozzles and blades. For steady flow through a control volume:
∑ F ⃗ = ρ Q ( v ⃗ 2 − v ⃗ 1 ) \sum \vec{F} = \rho Q (\vec{v}_2 - \vec{v}_1) ∑ F = ρQ ( v 2 − v 1 )
The left side includes pressure forces on the inlet and outlet areas, weight if relevant, and the force exerted by the solid boundary on the fluid. The fluid's force on the boundary is equal and opposite.
Free jet striking a fixed flat plate normal to the jet
The jet loses all its velocity in the original direction, so:
F = ρ Q v = ρ A v 2 F = \rho Q v = \rho A v^2 F = ρQ v = ρ A v 2
Example. A 50 mm 50\text{ mm} 50 mm jet moves at 20 m/s 20\text{ m/s} 20 m/s . A = 0.0019635 m 2 A = 0.0019635\text{ m}^2 A = 0.0019635 m 2 and Q = 0.03927 m 3 / s Q = 0.03927\text{ m}^3/\text{s} Q = 0.03927 m 3 / s , so F = 1000 ( 0.03927 ) ( 20 ) = 785 N F = 1000(0.03927)(20) = 785\text{ N} F = 1000 ( 0.03927 ) ( 20 ) = 785 N .
Moving vane
For a single vane moving at speed u u u in the jet's direction, the relative velocity is ( v − u ) (v - u) ( v − u ) . The mass actually deflected per second is ρ A ( v − u ) \rho A (v - u) ρ A ( v − u ) . For a flat plate normal to the jet:
F = ρ A ( v − u ) 2 F = \rho A (v - u)^2 F = ρ A ( v − u ) 2
For a series of vanes on a wheel, as in an impulse turbine, all the jet's mass is used, so F = ρ Q ( v − u ) ( 1 − cos θ ) F = \rho Q (v - u)(1 - \cos\theta) F = ρQ ( v − u ) ( 1 − cos θ ) for a deflection angle θ \theta θ . Power is F u F u F u , which is maximized near u = v / 2 u = v/2 u = v /2 .
Pipe bend in a horizontal plane
For a bend that turns the flow through angle θ \theta θ , with pressures p 1 , p 2 p_1, p_2 p 1 , p 2 and areas A 1 , A 2 A_1, A_2 A 1 , A 2 :
F x = p 1 A 1 − p 2 A 2 cos θ − ρ Q ( v 2 cos θ − v 1 ) F_x = p_1 A_1 - p_2 A_2 \cos\theta - \rho Q (v_2 \cos\theta - v_1) F x = p 1 A 1 − p 2 A 2 cos θ − ρQ ( v 2 cos θ − v 1 ) F y = − p 2 A 2 sin θ − ρ Q v 2 sin θ F_y = - p_2 A_2 \sin\theta - \rho Q v_2 \sin\theta F y = − p 2 A 2 sin θ − ρQ v 2 sin θ
Here F x F_x F x and F y F_y F y are the components the fluid exerts on the bend; the anchor block must resist R = F x 2 + F y 2 R = \sqrt{F_x^2 + F_y^2} R = F x 2 + F y 2 .
Example. A 300 mm 300\text{ mm} 300 mm horizontal 90 ∘ 90^\circ 9 0 ∘ bend carries 0.15 m 3 / s 0.15\text{ m}^3/\text{s} 0.15 m 3 / s at 200 kPa 200\text{ kPa} 200 kPa , assuming negligible head loss. A = 0.070686 m 2 A = 0.070686\text{ m}^2 A = 0.070686 m 2 , so v = 2.122 m/s v = 2.122\text{ m/s} v = 2.122 m/s and ρ Q v = 1000 ( 0.15 ) ( 2.122 ) = 318 N \rho Q v = 1000(0.15)(2.122) = 318\text{ N} ρQ v = 1000 ( 0.15 ) ( 2.122 ) = 318 N . The pressure force is p A = 200,000 ( 0.070686 ) = 14,137 N pA = 200{,}000(0.070686) = 14{,}137\text{ N} p A = 200 , 000 ( 0.070686 ) = 14 , 137 N . Each component is 14,137 + 318 = 14,455 N 14{,}137 + 318 = 14{,}455\text{ N} 14 , 137 + 318 = 14 , 455 N . The resultant is 2 ( 14,455 ) = 20,443 N ≈ 20.4 kN \sqrt{2}(14{,}455) = 20{,}443\text{ N} \approx 20.4\text{ kN} 2 ( 14 , 455 ) = 20 , 443 N ≈ 20.4 kN , acting at 45 ∘ 45^\circ 4 5 ∘ toward the outside of the bend.
9. CELE Exam Traps & Common Computational Errors
Warning
Trap 1: Pump Efficiency Inversion: Never multiply pump head or fluid power by η \eta η when calculating input electrical power. A pump consumes more energy than it delivers to the liquid: P input = P water η P_{\text{input}} = \frac{P_{\text{water}}}{\eta} P input = η P water . Conversely, for a turbine, electrical output is less than extracted fluid energy: P output = P fluid × η P_{\text{output}} = P_{\text{fluid}} \times \eta P output = P fluid × η .
Warning
Trap 2: Ignoring Velocity Head in Siphon Vacuum Calculations: When finding the absolute pressure at a siphon summit, candidates frequently set P s / γ = z res − z s − h L P_s/\gamma = z_{\text{res}} - z_s - h_L P s / γ = z res − z s − h L , forgetting to subtract the kinetic velocity head v s 2 2 g \frac{v_s^2}{2g} 2 g v s 2 . In high-velocity siphons, omission of velocity head overestimates the summit pressure and fails to predict impending cavitation.
Warning
Trap 3: Piezometer Readings and HGL vs. EGL: An open piezometer tube measures static pressure head plus elevation ( z + P / γ z + P/\gamma z + P / γ ), which corresponds strictly to the HGL . A Pitot tube with its opening facing into the flow measures total energy head ( z + P / γ + v 2 / ( 2 g ) z + P/\gamma + v^2/(2g) z + P / γ + v 2 / ( 2 g ) ), which corresponds to the EGL .
Loading diagram... Energy Grade Line (EGL) and Hydraulic Grade Line (HGL) Profile for a Reservoir-Pump-Piping System