Study guide

8.4 Open Channel Flow, Manning's Equation, and Hydraulic Jump

PRC Civil Engineer Licensure Examination CELE

Track your progress as you read

Finished sections get a check mark.

1 Chapter 1: Examination Overview, RA 544 & Professional Practice

1.1 CELE Structure, Format, Scoring, and 2026 Subject Order 1.2 Republic Act No. 544: The Civil Engineering Law and Board Regulations 1.3 Civil Engineering Ethics, Contracts, and Professional Practice

2 Chapter 2: Engineering Mathematics, Numerical Methods & Physics

2.1 Advanced Algebra, Progressions & Word Problems 2.2 Trigonometry and Analytical Geometry 2.3 Differential and Integral Calculus 2.4 Differential Equations and Numerical Methods 2.5 Series, Hyperbolic Functions, Multivariable Calculus, and Laplace Transforms 2.6 Numerical Methods: Linear Systems, Interpolation, Curve Fitting, and ODE Solvers 2.7 Physics for Engineers: Kinematics, Newton's Laws, Work-Energy, and Momentum

3 Chapter 3: Engineering Data Analysis & Engineering Economy

3.1 Engineering Data Analysis and Statistical Applications 3.2 Parameter Estimation, Linear Regression, Correlation, and Queuing Models 3.3 Engineering Economy: Time Value of Money and Interest Formulas 3.4 Project Evaluation, Depreciation, and Benefit-Cost Analysis

4 Chapter 4: Surveying Fundamentals, Construction Layout & Route Surveying

4.1 Errors, Corrections, and Pacing/Taping 4.2 Leveling, Earthworks, and Mass Haul Diagrams 4.3 Traverse Computations, Balancing, and Area Determinations 4.4 Route Surveying: Horizontal and Vertical Curves

5 Chapter 5: Highway & Transportation Engineering

5.1 Highway Geometric Design and Sight Distances 5.2 Traffic Engineering, Flow Fundamentals, and Pavement Design 5.3 Highway Policy, Route Location, Drainage, and Earthwork Slopes 5.4 Transportation Planning, Network Analysis, and Intermodal Systems

6 Chapter 6: Construction Materials, Methods, Management & Safety

6.1 Materials for Construction: Concrete, Formwork, Masonry, Steel, and Wood Products 6.2 Construction Equipment, Formwork, and Construction Methods 6.3 Construction Occupational Safety and Health: RA 11058 and DOLE DO 13 6.4 Construction Project Management, CPM/PERT, and Resource Scheduling 6.5 Construction Principles: Design Requirements, Project Organization, Cost Control, and Value Engineering 6.6 Quantity Surveying, Unit Cost Analysis, and Project Cost Estimates 6.7 Construction Trades and Specialties: Plumbing, Plastics, Doors and Windows, Finishes, and Electrical

7 Chapter 7: Fluid Properties, Hydrostatics & Buoyancy

7.1 Fluid Properties, Units, and Pressure Measurement 7.2 Hydrostatic Pressure on Plane and Curved Surfaces 7.3 Buoyancy, Flotation, and Accelerated Fluid Masses

8 Chapter 8: Hydrodynamics, Pipe Flow, Open Channels & Water Supply

8.1 Fluid Dynamics: Continuity and Energy Equations 8.2 Flow Measurement: Orifices, Weirs, and Venturi Meters 8.3 Fluid Flow in Pipes, Friction Losses, and Pipe Networks 8.4 Open Channel Flow, Manning's Equation, and Hydraulic Jump 8.5 Water Supply: Demand, Storage, Pumping, Distribution, and Treatment

9 Chapter 9: Soil Properties, Seepage & Stresses in Soil Mass

9.1 Soil Composition, Weight-Volume Phase Relationships 9.2 Soil Classification Systems (USCS & AASHTO) and Atterberg Limits 9.3 Soil Permeability, Seepage, Flow Nets, and Effective Stress 9.4 Stresses in Soil Mass, Stress Distribution, and Immediate and Secondary Settlement

10 Chapter 10: Consolidation, Soil Strength, Earth Pressures & Foundations

10.1 Soil Compaction and Soil Compressibility/Consolidation 10.2 Shear Strength of Soils and Mohr-Coulomb Failure Criteria 10.3 Lateral Earth Pressures (Rankine & Coulomb) and Retaining Walls 10.4 Shallow and Deep Foundation Bearing Capacity and Slope Stability

11 Chapter 11: Engineering Mechanics & Statics

11.1 Force Systems, Resultants, and Equilibrium of Rigid Bodies 11.2 Centroids, Moments of Inertia, and Friction 11.3 Cables, Trusses, and Internal Forces in Members

12 Chapter 12: Strength of Materials

12.1 Axial Stress, Strain, and Deformation 12.2 Torsion, Flanged Bolt Couplings, and Thin-Walled Pressure Vessels 12.3 Beam Stresses: Flexural and Transverse Shear 12.4 Beam Deflections, Combined Stresses, and Mohr's Circle

13 Chapter 13: Structural Analysis & NSCP Load Criteria

13.1 Indeterminate Structures: Approximate and Classical Methods 13.2 Moment Distribution Method and Slope Deflection 13.3 Influence Lines for Determinate and Indeterminate Structures 13.4 NSCP Minimum Design Loads: Dead, Live, Wind, and Earthquake

14 Chapter 14: Reinforced Concrete Design (NSCP 2015 / USD)

14.1 Ultimate Strength Design (USD) Principles and Singly Reinforced Beams 14.2 Doubly Reinforced Beams and T-Beams 14.3 Shear and Diagonal Tension, Stirrup Design, and Development Length 14.4 Reinforced Concrete Columns and Isolated Footing Design

15 Chapter 15: Steel, Timber & Prestressed Design and Materials Testing

15.1 Structural Steel Tension Members and Connections 15.2 Structural Steel Compression Members and Beam Design 15.3 Timber Design Principles, Working Stress, and Sawn Lumber Beams 15.4 Prestressed Concrete Fundamentals and Prestress Losses 15.5 Construction Materials Testing and Concrete Mix Proportioning

8.4 Open Channel Flow, Manning's Equation, and Hydraulic Jump

Key Takeaways Explain This Topic AI

Open channel flow features a free liquid surface exposed to atmospheric pressure, where flow geometry is characterized by wetted perimeter ( P P P ), cross-sectional area ( A A A ), hydraulic radius ( R h = A / P R_h = A/P R h ​ = A / P ), top width ( T T T ), and hydraulic depth ( D h = A / T D_h = A/T D h ​ = A / T ).

Steady uniform flow is governed by the metric Manning equation: v = 1 n R h 2 / 3 S 1 / 2 v = \frac{1}{n} R_h^{2/3} S^{1/2} v = n 1 ​ R h 2/3 ​ S 1/2 and Q = 1 n A R h 2 / 3 S 1 / 2 Q = \frac{1}{n} A R_h^{2/3} S^{1/2} Q = n 1 ​ A R h 2/3 ​ S 1/2 , where n n n is Manning's roughness coefficient and the bed slope S 0 S_0 S 0 ​ equals the energy slope S f S_f S f ​ .

The most hydraulically efficient (most economical) cross-section minimizes wetted perimeter P P P for a given area A A A , yielding R h = y / 2 R_h = y/2 R h ​ = y /2 : for a rectangular channel, width b = 2 y b = 2y b = 2 y ; for a trapezoidal channel, a semi-hexagon with side slope 60 ∘ 60^\circ 6 0 ∘ ( z = 1 / 3 ≈ 0.577 z = 1/\sqrt{3} \approx 0.577 z = 1/ 3 ​ ≈ 0.577 ); for a circular conduit, maximum discharge occurs at y = 0.938 d 0 y = 0.938 d_0 y = 0.938 d 0 ​ and maximum velocity at y = 0.810 d 0 y = 0.810 d_0 y = 0.810 d 0 ​ .

Specific energy is total head relative to the channel invert: E = y + v 2 2 g = y + Q 2 2 g A 2 E = y + \frac{v^2}{2g} = y + \frac{Q^2}{2g A^2} E = y + 2 g v 2 ​ = y + 2 g A 2 Q 2 ​ ; critical flow occurs at minimum specific energy where Q 2 T g A 3 = 1 \frac{Q^2 T}{g A^3} = 1 g A 3 Q 2 T ​ = 1 , which for rectangular channels yields critical depth y c = q 2 g 3 y_c = \sqrt[3]{\frac{q^2}{g}} y c ​ = 3 g q 2 ​ ​ and minimum specific energy E min ⁡ = 1.5 y c E_{\min} = 1.5 y_c E m i n ​ = 1.5 y c ​ .

The Froude number F r = v g D h Fr = \frac{v}{\sqrt{g D_h}} F r = g D h ​ ​ v ​ defines flow state: subcritical ( F r < 1 Fr < 1 F r < 1 , tranquil), critical ( F r = 1 Fr = 1 F r = 1 ), and supercritical ( F r > 1 Fr > 1 F r > 1 , rapid); an abrupt transition from supercritical to subcritical flow forms a hydraulic jump, where sequent depths follow the Bélanger equation y 2 = y 1 2 ( 1 + 8 F r 1 2 − 1 ) y_2 = \frac{y_1}{2}(\sqrt{1 + 8 Fr_1^2} - 1) y 2 ​ = 2 y 1 ​ ​ ( 1 + 8 F r 1 2 ​ ​ − 1 ) with head loss Δ E = ( y 2 − y 1 ) 3 4 y 1 y 2 \Delta E = \frac{(y_2 - y_1)^3}{4 y_1 y_2} Δ E = 4 y 1 ​ y 2 ​ ( y 2 ​ − y 1 ​ ) 3 ​ .

Last updated: October 2026

8.4 Open Channel Flow, Manning's Equation, and Hydraulic Jump

Open channel hydraulics encompasses fluid conveyance where the flowing liquid possesses an unconfined free surface subjected to local atmospheric pressure. In civil engineering practice and the CELE licensure examination, open channel flow governs stormwater drainage, culverts, spillway chutes, irrigation canals, and natural river floodplains. Unlike pressurized pipe flow, where the cross-sectional area is fixed by the conduit geometry, open channel flow depth ( y y y ) varies dynamically with discharge, channel slope, boundary roughness, and upstream/downstream controls.

1. Open Channel Geometry Fundamentals

The hydraulic response of an open channel depends on five fundamental geometric properties of its flow cross-section:

Geometric Parameter Symbol Mathematical Definition Physical Meaning

Flow Area A A A ∫ 0 y B ( z ) d z \int_0^y B(z) \, dz ∫ 0 y ​ B ( z ) d z Cross-sectional area occupied by liquid ( m 2 \text{m}^2 m 2 )

Wetted Perimeter P P P ∫ bed d s \int_{\text{bed}} ds ∫ bed ​ d s Length of channel boundary line in direct contact with liquid ( m \text{m} m )

Hydraulic Radius R h R_h R h ​ R h = A P R_h = \frac{A}{P} R h ​ = P A ​ Ratio of area to wetted perimeter; characterizes frictional efficiency ( m \text{m} m )

Top Width T T T T = ( d A d y ) T = \left(\frac{dA}{dy}\right) T = ( d y d A ​ ) Width of the free liquid surface exposed to air ( m \text{m} m )

Hydraulic Depth D h D_h D h ​ D h = A T D_h = \frac{A}{T} D h ​ = T A ​ Characteristic linear depth for gravity wave speed and Froude calculations ( m \text{m} m )

Cross-Sectional Geometry Formulations

Rectangular Channel (width b b b , depth y y y ): A = b y , P = b + 2 y , R h = b y b + 2 y , T = b , D h = y A = b y, \quad P = b + 2y, \quad R_h = \frac{b y}{b + 2y}, \quad T = b, \quad D_h = y A = b y , P = b + 2 y , R h ​ = b + 2 y b y ​ , T = b , D h ​ = y

Trapezoidal Channel (bottom width b b b , depth y y y , side slope 1 V : z H 1\text{V}:z\text{H} 1 V : z H ): A = ( b + z y ) y , P = b + 2 y 1 + z 2 , T = b + 2 z y , D h = ( b + z y ) y b + 2 z y A = (b + z y) y, \quad P = b + 2y \sqrt{1 + z^2}, \quad T = b + 2 z y, \quad D_h = \frac{(b + zy)y}{b + 2zy} A = ( b + zy ) y , P = b + 2 y 1 + z 2 ​ , T = b + 2 zy , D h ​ = b + 2 zy ( b + zy ) y ​

Triangular Channel (side slope 1 V : z H 1\text{V}:z\text{H} 1 V : z H , included vertex angle 2 θ 2\theta 2 θ where z = tan ⁡ θ z = \tan \theta z = tan θ ): A = z y 2 , P = 2 y 1 + z 2 , R h = z y 2 1 + z 2 , T = 2 z y , D h = y 2 A = z y^2, \quad P = 2y \sqrt{1 + z^2}, \quad R_h = \frac{z y}{2\sqrt{1 + z^2}}, \quad T = 2 z y, \quad D_h = \frac{y}{2} A = z y 2 , P = 2 y 1 + z 2 ​ , R h ​ = 2 1 + z 2 ​ zy ​ , T = 2 zy , D h ​ = 2 y ​

2. Uniform Steady Flow: The Chezy and Manning Equations

In steady uniform flow , gravity driving forces exactly balance boundary shear resistance. Consequently, the water depth remains constant at the normal depth ( y n y_n y n ​ ) , the velocity profile is invariant along the reach, and the bed slope ( S 0 S_0 S 0 ​ ), water surface slope ( S w S_w S w ​ ), and energy grade line slope ( S f S_f S f ​ ) are all strictly parallel ( S 0 = S w = S f = S S_0 = S_w = S_f = S S 0 ​ = S w ​ = S f ​ = S ).

The Chezy Formula

Developed by Antoine de Chézy in 1769 from force equilibrium: v = C R h S v = C \sqrt{R_h S} v = C R h ​ S ​ where C C C is the Chezy resistance factor ( m 1 / 2 / s \text{m}^{1/2}/\text{s} m 1/2 / s ).

The Manning Equation (SI Metric)

Robert Manning (1889) established the empirical relation linking Chezy's C C C to boundary roughness: C = 1 n R h 1 / 6 C = \frac{1}{n} R_h^{1/6} C = n 1 ​ R h 1/6 ​ . Substituting into Chezy's equation produces the Manning Equation in SI units: v = 1 n R h 2 / 3 S 1 / 2 v = \frac{1}{n} R_h^{2/3} S^{1/2} v = n 1 ​ R h 2/3 ​ S 1/2 Q = A v = 1 n A R h 2 / 3 S 1 / 2 Q = A v = \frac{1}{n} A R_h^{2/3} S^{1/2} Q = A v = n 1 ​ A R h 2/3 ​ S 1/2 where Q Q Q is discharge ( m 3 / s \text{m}^3/\text{s} m 3 / s ), A A A is flow area ( m 2 \text{m}^2 m 2 ), R h R_h R h ​ is hydraulic radius ( m \text{m} m ), S S S is longitudinal bed slope (dimensionless, m/m \text{m/m} m/m ), and n n n is Manning's roughness coefficient ( s / m 1 / 3 \text{s}/\text{m}^{1/3} s / m 1/3 ).

  • Channel Boundary Material Typical Manning's n n n
  • Smooth troweled concrete / glass-fiber flume 0.011 – 0.012 0.011\text{–}0.012 0.011 – 0.012
  • Finished concrete lining (cast-in-place) 0.013 – 0.015 0.013\text{–}0.015 0.013 – 0.015
  • Unfinished concrete / smooth shotcrete 0.016 – 0.018 0.016\text{–}0.018 0.016 – 0.018
  • Clean, straight excavated earth canal 0.020 – 0.025 0.020\text{–}0.025 0.020 – 0.025
  • Earth canal with gravel, stones, and weeds 0.030 – 0.035 0.030\text{–}0.035 0.030 – 0.035
  • Natural mountain stream with rocky bed / boulders 0.040 – 0.060 0.040\text{–}0.060 0.040 – 0.060
  • 3. Hydraulically Most Efficient (Most Economical) Cross-Sections

A channel cross-section is defined as hydraulically most efficient (most economical) when it conveys the maximum discharge Q Q Q for a given flow area A A A , bed slope S S S , and roughness n n n . By inspecting Manning's formula ( Q ∝ R h 2 / 3 = ( A / P ) 2 / 3 Q \propto R_h^{2/3} = (A/P)^{2/3} Q ∝ R h 2/3 ​ = ( A / P ) 2/3 ), maximizing Q Q Q for a constant area A A A requires minimizing the wetted perimeter P P P ( d P / d y = 0 dP/dy = 0 d P / d y = 0 ). Minimizing P P P also minimizes excavation volume and concrete lining cost.

1. Most Economical Rectangular Channel

For a rectangle of area A = b y A = b y A = b y , wetted perimeter is P = b + 2 y = A y + 2 y P = b + 2y = \frac{A}{y} + 2y P = b + 2 y = y A ​ + 2 y . d P d y = − A y 2 + 2 = 0 ⟹ A = 2 y 2 ⟹ b y = 2 y 2 ⟹ b = 2 y \frac{dP}{dy} = - \frac{A}{y^2} + 2 = 0 \implies A = 2y^2 \implies b y = 2y^2 \implies \boxed{b = 2y} d y d P ​ = − y 2 A ​ + 2 = 0 ⟹ A = 2 y 2 ⟹ b y = 2 y 2 ⟹ b = 2 y ​ R h = A P = 2 y 2 2 y + 2 y = y 2 \boxed{R_h = \frac{A}{P} = \frac{2y^2}{2y + 2y} = \frac{y}{2}} R h ​ = P A ​ = 2 y + 2 y 2 y 2 ​ = 2 y ​ ​ The optimal rectangular channel has a width equal to twice the water depth , and its hydraulic radius equals half the depth .

2. Most Economical Trapezoidal Channel (The Semi-Hexagon)

For a trapezoidal channel with variable bottom width b b b and side slope z z z :

Setting ∂ P ∂ y = 0 \frac{\partial P}{\partial y} = 0 ∂ y ∂ P ​ = 0 and ∂ P ∂ z = 0 \frac{\partial P}{\partial z} = 0 ∂ z ∂ P ​ = 0 yields a semi-regular hexagon :

Side slope angle with horizontal: θ = 60 ∘ ⟹ z = 1 tan ⁡ 60 ∘ = 1 3 ≈ 0.57735 \theta = 60^\circ \implies z = \frac{1}{\tan 60^\circ} = \frac{1}{\sqrt{3}} \approx 0.57735 θ = 6 0 ∘ ⟹ z = t a n 6 0 ∘ 1 ​ = 3 ​ 1 ​ ≈ 0.57735

Bottom width: b = 2 3 y ≈ 1.1547 y b = \frac{2}{\sqrt{3}} y \approx 1.1547 y b = 3 ​ 2 ​ y ≈ 1.1547 y

Top width: T = 2 b = 4 3 y ≈ 2.3094 y T = 2 b = \frac{4}{\sqrt{3}} y \approx 2.3094 y T = 2 b = 3 ​ 4 ​ y ≈ 2.3094 y

  • Flow Area: A = 3 y 2 ≈ 1.73205 y 2 A = \sqrt{3} y^2 \approx 1.73205 y^2 A = 3 ​ y 2 ≈ 1.73205 y 2
  • Wetted perimeter: P = 2 3 y ≈ 3.4641 y P = 2\sqrt{3} y \approx 3.4641 y P = 2 3 ​ y ≈ 3.4641 y
  • Hydraulic radius: R h = y 2 \boxed{R_h = \frac{y}{2}} R h ​ = 2 y ​ ​

Inscribed Circle Criterion: Any most economical polygonal channel of any number of sides forms a polygon circumscribed about a semicircle whose center lies on the free water surface and whose radius is r = y r = y r = y .

3. Circular Conduits Flowing Partially Full

Due to boundary perimeter friction near the crown, circular pipes flowing full do not convey the maximum flow or velocity:

Maximum Velocity Depth: Occurs at depth y = 0.810 d 0 y = 0.810 d_0 y = 0.810 d 0 ​ ( v max ⁡ = 1.14 v full v_{\max} = 1.14 v_{\text{full}} v m a x ​ = 1.14 v full ​ ), corresponding to a subtended central angle θ ≈ 257 ∘ \theta \approx 257^\circ θ ≈ 25 7 ∘ .

Maximum Discharge Depth: Occurs at depth y = 0.938 d 0 y = 0.938 d_0 y = 0.938 d 0 ​ ( Q max ⁡ = 1.08 Q full Q_{\max} = 1.08 Q_{\text{full}} Q m a x ​ = 1.08 Q full ​ ), corresponding to a subtended central angle θ ≈ 302 ∘ \theta \approx 302^\circ θ ≈ 30 2 ∘ .

4. Specific Energy and Critical Flow

Specific Energy ( E E E ) is the total mechanical energy head measured relative to the channel invert (channel bottom datum): E = y + v 2 2 g = y + Q 2 2 g A 2 E = y + \frac{v^2}{2g} = y + \frac{Q^2}{2g A^2} E = y + 2 g v 2 ​ = y + 2 g A 2 Q 2 ​

Loading diagram...

The Specific Energy Curve and Alternate Depths

Plotting specific energy E E E versus depth y y y for a fixed discharge Q Q Q reveals two asymptotes ( y = 0 y = 0 y = 0 and E = y E = y E = y ). For any specific energy value E > E min ⁡ E > E_{\min} E > E m i n ​ , there exist two possible alternate depths :

A small depth with high velocity (supercritical flow).

A large depth with low velocity (subcritical flow).

Critical Flow Condition

Critical depth occurs at the point of minimum specific energy ( d E / d y = 0 dE/dy = 0 d E / d y = 0 ): d E d y = 1 − Q 2 g A 3 d A d y = 0 \frac{dE}{dy} = 1 - \frac{Q^2}{g A^3} \frac{dA}{dy} = 0 d y d E ​ = 1 − g A 3 Q 2 ​ d y d A ​ = 0 Since the rate of change of area with depth is the top surface width ( d A d y = T \frac{dA}{dy} = T d y d A ​ = T ): Q 2 T g A 3 = 1 ⟺ v 2 g ( A / T ) = 1 ⟺ v g D h = 1 \boxed{\frac{Q^2 T}{g A^3} = 1 \iff \frac{v^2}{g (A/T)} = 1 \iff \frac{v}{\sqrt{g D_h}} = 1} g A 3 Q 2 T ​ = 1 ⟺ g ( A / T ) v 2 ​ = 1 ⟺ g D h ​ ​ v ​ = 1 ​ This is the universal critical flow criterion for an open channel of arbitrary cross-sectional shape .

Critical Flow in Rectangular Channels

Defining unit discharge q = Q b q = \frac{Q}{b} q = b Q ​ (discharge per meter of channel width, m 3 / ( s ⋅ m ) \text{m}^3/(\text{s}\cdot\text{m}) m 3 / ( s ⋅ m ) ): A = b y c , T = b ⟹ Q 2 b g ( b y c ) 3 = q 2 g y c 3 = 1 A = b y_c, \quad T = b \implies \frac{Q^2 b}{g (b y_c)^3} = \frac{q^2}{g y_c^3} = 1 A = b y c ​ , T = b ⟹ g ( b y c ​ ) 3 Q 2 b ​ = g y c 3 ​ q 2 ​ = 1 y c = q 2 g 3 = ( q 2 g ) 1 / 3 \boxed{y_c = \sqrt[3]{\frac{q^2}{g}} = \left(\frac{q^2}{g}\right)^{1/3}} y c ​ = 3 g q 2 ​ ​ = ( g q 2 ​ ) 1/3 ​ v c = g y c , v c 2 2 g = y c 2 v_c = \sqrt{g y_c}, \quad \frac{v_c^2}{2g} = \frac{y_c}{2} v c ​ = g y c ​ ​ , 2 g v c 2 ​ ​ = 2 y c ​ ​ E min ⁡ = y c + v c 2 2 g = y c + 0.5 y c = 1.5 y c = 3 2 y c \boxed{E_{\min} = y_c + \frac{v_c^2}{2g} = y_c + 0.5 y_c = 1.5 y_c = \frac{3}{2} y_c} E m i n ​ = y c ​ + 2 g v c 2 ​ ​ = y c ​ + 0.5 y c ​ = 1.5 y c ​ = 2 3 ​ y c ​ ​

5. The Froude Number and Flow Regimes

The dimensionless Froude Number ( F r Fr F r ) represents the ratio of inertial forces to gravitational forces, and physically corresponds to the ratio of flow velocity v v v to the celerity (speed) of an elementary gravity surface wave c = g D h c = \sqrt{g D_h} c = g D h ​ ​ : F r = v g D h = v g ( A / T ) Fr = \frac{v}{\sqrt{g D_h}} = \frac{v}{\sqrt{g (A/T)}} F r = g D h ​ ​ v ​ = g ( A / T ) ​ v ​

Regime Froude Number Depth Relationship Wave Propagation / Hydraulic Control

Subcritical Flow F r < 1 Fr < 1 F r < 1 y > y c , v < v c y > y_c, \; v < v_c y > y c ​ , v < v c ​ Tranquil, streaming flow; surface gravity waves can travel upstream against the current ( c > v c > v c > v ). Control is located downstream (e.g., weir, gate).

Critical Flow F r = 1 Fr = 1 F r = 1 y = y c , v = v c y = y_c, \; v = v_c y = y c ​ , v = v c ​ Unstable surface; standing waves form; specific energy is at its absolute minimum.

Supercritical Flow F r > 1 Fr > 1 F r > 1 y < y c , v > v c y < y_c, \; v > v_c y < y c ​ , v > v c ​ Rapid, shooting flow; surface disturbances cannot propagate upstream ( v > c v > c v > c ). Control is located upstream (e.g., sluice gate, spillway crest).

6. The Hydraulic Jump in Rectangular Channels

A hydraulic jump is a rapid, turbulent, irreversible open-channel phenomenon wherein flow transitions abruptly from an unstable supercritical state ( F r 1 > 1 , y 1 < y c Fr_1 > 1, y_1 < y_c F r 1 ​ > 1 , y 1 ​ < y c ​ ) to a stable subcritical state ( F r 2 < 1 , y 2 > y c Fr_2 < 1, y_2 > y_c F r 2 ​ < 1 , y 2 ​ > y c ​ ) , dissipating tremendous kinetic energy through roller vortices.

Momentum Conservation and Bélanger's Sequent Depths

Because energy is lost in the jump, Bernoulli's equation cannot predict the downstream depth. Instead, applying the Linear Momentum Equation across the jump control volume (neglecting boundary shear over the short jump length) yields equality of the Specific Force (Momentum Function M M M ) : M = Q 2 g A + A y ˉ = constant M = \frac{Q^2}{g A} + A \bar{y} = \text{constant} M = g A Q 2 ​ + A y ˉ ​ = constant For a rectangular channel of width b b b , integrating hydrostatic pressure and momentum fluxes produces the Bélanger Sequent (Conjugate) Depth Equation : y 2 = y 1 2 ( 1 + 8 F r 1 2 − 1 ) \boxed{y_2 = \frac{y_1}{2} \left(\sqrt{1 + 8 Fr_1^2} - 1\right)} y 2 ​ = 2 y 1 ​ ​ ( 1 + 8 F r 1 2 ​ ​ − 1 ) ​ Conversely, expressing upstream depth in terms of downstream Froude number: y 1 = y 2 2 ( 1 + 8 F r 2 2 − 1 ) y_1 = \frac{y_2}{2} \left(\sqrt{1 + 8 Fr_2^2} - 1\right) y 1 ​ = 2 y 2 ​ ​ ( 1 + 8 F r 2 2 ​ ​ − 1 )

Hydraulic Jump Characteristics

Head Loss Across Jump ( Δ E \Delta E Δ E ): The total energy head dissipated by turbulent rollers: Δ E = E 1 − E 2 = ( y 2 − y 1 ) 3 4 y 1 y 2 \Delta E = E_1 - E_2 = \frac{(y_2 - y_1)^3}{4 y_1 y_2} Δ E = E 1 ​ − E 2 ​ = 4 y 1 ​ y 2 ​ ( y 2 ​ − y 1 ​ ) 3 ​

Height of Jump ( h j h_j h j ​ ): h j = y 2 − y 1 h_j = y_2 - y_1 h j ​ = y 2 ​ − y 1 ​ .

Length of Jump ( L j L_j L j ​ ): Empirically, L j ≈ 5 to 7 ( y 2 − y 1 ) L_j \approx 5\text{ to }7 (y_2 - y_1) L j ​ ≈ 5 to 7 ( y 2 ​ − y 1 ​ ) for F r 1 Fr_1 F r 1 ​ between 4.5 4.5 4.5 and 9.0 9.0 9.0 .

Power Dissipated in Jump ( P P P ): P = γ Q Δ E ( kW for Q in m 3 / s , γ in kN/m 3 , Δ E in m ) P = \gamma Q \Delta E \quad (\text{kW for } Q \text{ in m}^3/\text{s}, \gamma \text{ in kN/m}^3, \Delta E \text{ in m}) P = γ Q Δ E ( kW for Q in m 3 / s , γ in kN/m 3 , Δ E in m )

Jump Classification by Initial Froude Number ( F r 1 Fr_1 F r 1 ​ ):

1.0 < F r 1 ≤ 1.7 1.0 < Fr_1 \le 1.7 1.0 < F r 1 ​ ≤ 1.7 : Undular Jump (slight standing waves on surface, negligible energy loss).

1.7 < F r 1 ≤ 2.5 1.7 < Fr_1 \le 2.5 1.7 < F r 1 ​ ≤ 2.5 : Weak Jump (small surface rollers, Δ E / E 1 < 15 % \Delta E / E_1 < 15\% Δ E / E 1 ​ < 15% ).

2.5 < F r 1 ≤ 4.5 2.5 < Fr_1 \le 4.5 2.5 < F r 1 ​ ≤ 4.5 : Oscillating Jump (jet oscillates from bottom to surface, produces destructive waves downstream).

4.5 < F r 1 ≤ 9.0 4.5 < Fr_1 \le 9.0 4.5 < F r 1 ​ ≤ 9.0 : Steady / Well-Established Jump (best operating range for stilling basins, 45 % – 70 % 45\%\text{–}70\% 45% – 70% energy dissipation).

F r 1 > 9.0 Fr_1 > 9.0 F r 1 ​ > 9.0 : Strong / Chutting Jump (rough, violent action, up to 85 % 85\% 85% energy dissipation).

7. Worked Example: Comprehensive Open Channel & Hydraulic Jump Analysis

Problem Statement: A rectangular concrete spillway apron has a channel width of b = 6.00 m b = 6.00\text{ m} b = 6.00 m . Water issues from beneath a high-head sluice gate at a uniform depth of y 1 = 0.600 m y_1 = 0.600\text{ m} y 1 ​ = 0.600 m with an initial velocity of v 1 = 12.00 m/s v_1 = 12.00\text{ m/s} v 1 ​ = 12.00 m/s . The flow then enters a horizontal stilling basin and forms a hydraulic jump. Taking γ = 9.81 kN/m 3 \gamma = 9.81\text{ kN/m}^3 γ = 9.81 kN/m 3 and g = 9.81 m/s 2 g = 9.81\text{ m/s}^2 g = 9.81 m/s 2 , determine:

The total discharge Q Q Q and unit discharge q q q .

The initial Froude number F r 1 Fr_1 F r 1 ​ and initial specific energy E 1 E_1 E 1 ​ .

The critical depth y c y_c y c ​ .

The sequent (conjugate) depth y 2 y_2 y 2 ​ downstream of the jump.

The energy head loss Δ E \Delta E Δ E across the jump.

The power dissipated by the jump in kilowatts.

Step-by-Step Solution:

Compute discharge and unit discharge: Q = A 1 v 1 = ( b y 1 ) v 1 = ( 6.00 m × 0.600 m ) ( 12.00 m/s ) = 3.60 m 2 × 12.00 m/s = 43.20 m 3 / s Q = A_1 v_1 = (b y_1) v_1 = (6.00\text{ m} \times 0.600\text{ m})(12.00\text{ m/s}) = 3.60\text{ m}^2 \times 12.00\text{ m/s} = 43.20\text{ m}^3/\text{s} Q = A 1 ​ v 1 ​ = ( b y 1 ​ ) v 1 ​ = ( 6.00 m × 0.600 m ) ( 12.00 m/s ) = 3.60 m 2 × 12.00 m/s = 43.20 m 3 / s q = Q b = 43.20 m 3 / s 6.00 m = 7.20 m 3 / ( s ⋅ m ) q = \frac{Q}{b} = \frac{43.20\text{ m}^3/\text{s}}{6.00\text{ m}} = 7.20\text{ m}^3/(\text{s}\cdot\text{m}) q = b Q ​ = 6.00 m 43.20 m 3 / s ​ = 7.20 m 3 / ( s ⋅ m )

Compute initial Froude number and specific energy: F r 1 = v 1 g y 1 = 12.00 m/s ( 9.81 m/s 2 ) ( 0.600 m ) = 12.00 5.886 = 12.00 2.4261 = 4.946 Fr_1 = \frac{v_1}{\sqrt{g y_1}} = \frac{12.00\text{ m/s}}{\sqrt{(9.81\text{ m/s}^2)(0.600\text{ m})}} = \frac{12.00}{\sqrt{5.886}} = \frac{12.00}{2.4261} = 4.946 F r 1 ​ = g y 1 ​ ​ v 1 ​ ​ = ( 9.81 m/s 2 ) ( 0.600 m ) ​ 12.00 m/s ​ = 5.886 ​ 12.00 ​ = 2.4261 12.00 ​ = 4.946 Because F r 1 = 4.95 > 1 Fr_1 = 4.95 > 1 F r 1 ​ = 4.95 > 1 , the incoming flow is strongly supercritical . E 1 = y 1 + v 1 2 2 g = 0.600 m + ( 12.00 m/s ) 2 2 ( 9.81 m/s 2 ) = 0.600 + 144.0 19.62 = 0.600 + 7.339 = 7.939 m E_1 = y_1 + \frac{v_1^2}{2g} = 0.600\text{ m} + \frac{(12.00\text{ m/s})^2}{2(9.81\text{ m/s}^2)} = 0.600 + \frac{144.0}{19.62} = 0.600 + 7.339 = 7.939\text{ m} E 1 ​ = y 1 ​ + 2 g v 1 2 ​ ​ = 0.600 m + 2 ( 9.81 m/s 2 ) ( 12.00 m/s ) 2 ​ = 0.600 + 19.62 144.0 ​ = 0.600 + 7.339 = 7.939 m

Compute critical depth ( y c y_c y c ​ ): y c = q 2 g 3 = ( 7.20 ) 2 9.81 3 = 51.84 9.81 3 = 5.2844 3 = 1.742 m y_c = \sqrt[3]{\frac{q^2}{g}} = \sqrt[3]{\frac{(7.20)^2}{9.81}} = \sqrt[3]{\frac{51.84}{9.81}} = \sqrt[3]{5.2844} = 1.742\text{ m} y c ​ = 3 g q 2 ​ ​ = 3 9.81 ( 7.20 ) 2 ​ ​ = 3 9.81 51.84 ​ ​ = 3 5.2844 ​ = 1.742 m (Notice that y 1 = 0.600 m < y c = 1.742 m y_1 = 0.600\text{ m} < y_c = 1.742\text{ m} y 1 ​ = 0.600 m < y c ​ = 1.742 m , confirming supercritical flow). E min ⁡ = 1.5 y c = 1.5 ( 1.742 m ) = 2.613 m E_{\min} = 1.5 y_c = 1.5(1.742\text{ m}) = 2.613\text{ m} E m i n ​ = 1.5 y c ​ = 1.5 ( 1.742 m ) = 2.613 m

Calculate sequent depth ( y 2 y_2 y 2 ​ ) via the Bélanger Equation: y 2 = y 1 2 ( 1 + 8 F r 1 2 − 1 ) = 0.600 2 ( 1 + 8 ( 4.946 ) 2 − 1 ) y_2 = \frac{y_1}{2} \left(\sqrt{1 + 8 Fr_1^2} - 1\right) = \frac{0.600}{2} \left(\sqrt{1 + 8(4.946)^2} - 1\right) y 2 ​ = 2 y 1 ​ ​ ( 1 + 8 F r 1 2 ​ ​ − 1 ) = 2 0.600 ​ ( 1 + 8 ( 4.946 ) 2 ​ − 1 ) 8 F r 1 2 = 8 ( 24.463 ) = 195.705 8 Fr_1^2 = 8(24.463) = 195.705 8 F r 1 2 ​ = 8 ( 24.463 ) = 195.705 1 + 195.705 = 196.705 = 14.025 \sqrt{1 + 195.705} = \sqrt{196.705} = 14.025 1 + 195.705 ​ = 196.705 ​ = 14.025 y 2 = 0.300 × ( 14.025 − 1 ) = 0.300 × 13.025 = 3.908 m ≈ 3.91 m y_2 = 0.300 \times (14.025 - 1) = 0.300 \times 13.025 = 3.908\text{ m} \approx 3.91\text{ m} y 2 ​ = 0.300 × ( 14.025 − 1 ) = 0.300 × 13.025 = 3.908 m ≈ 3.91 m

Compute energy head loss ( Δ E \Delta E Δ E ): Δ E = ( y 2 − y 1 ) 3 4 y 1 y 2 = ( 3.908 − 0.600 ) 3 4 ( 0.600 ) ( 3.908 ) = ( 3.308 ) 3 9.379 = 36.199 9.379 = 3.860 m \Delta E = \frac{(y_2 - y_1)^3}{4 y_1 y_2} = \frac{(3.908 - 0.600)^3}{4(0.600)(3.908)} = \frac{(3.308)^3}{9.379} = \frac{36.199}{9.379} = 3.860\text{ m} Δ E = 4 y 1 ​ y 2 ​ ( y 2 ​ − y 1 ​ ) 3 ​ = 4 ( 0.600 ) ( 3.908 ) ( 3.908 − 0.600 ) 3 ​ = 9.379 ( 3.308 ) 3 ​ = 9.379 36.199 ​ = 3.860 m (Verification: v 2 = Q b y 2 = 43.20 6.00 × 3.908 = 1.842 m/s v_2 = \frac{Q}{b y_2} = \frac{43.20}{6.00 \times 3.908} = 1.842\text{ m/s} v 2 ​ = b y 2 ​ Q ​ = 6.00 × 3.908 43.20 ​ = 1.842 m/s . E 2 = 3.908 + 1.842 2 19.62 = 3.908 + 0.173 = 4.081 m E_2 = 3.908 + \frac{1.842^2}{19.62} = 3.908 + 0.173 = 4.081\text{ m} E 2 ​ = 3.908 + 19.62 1.84 2 2 ​ = 3.908 + 0.173 = 4.081 m . Δ E = E 1 − E 2 = 7.939 − 4.081 = 3.858 m \Delta E = E_1 - E_2 = 7.939 - 4.081 = 3.858\text{ m} Δ E = E 1 ​ − E 2 ​ = 7.939 − 4.081 = 3.858 m . Matches perfectly!)

Compute power dissipated by the jump: P = γ Q Δ E = ( 9.81 kN/m 3 ) ( 43.20 m 3 / s ) ( 3.860 m ) = 1 , 635.8 kW ≈ 1.64 MW P = \gamma Q \Delta E = (9.81\text{ kN/m}^3)(43.20\text{ m}^3/\text{s})(3.860\text{ m}) = 1,635.8\text{ kW} \approx 1.64\text{ MW} P = γ Q Δ E = ( 9.81 kN/m 3 ) ( 43.20 m 3 / s ) ( 3.860 m ) = 1 , 635.8 kW ≈ 1.64 MW

8. CELE Exam Traps & Common Computational Errors

Warning

Trap 1: Conjugate (Sequent) Depths vs. Alternate Depths: Do not confuse these two terms! Alternate depths are two different flow depths having the exact same specific energy ( E 1 = E 2 E_1 = E_2 E 1 ​ = E 2 ​ ) , corresponding to frictionless subcritical and supercritical states. Conjugate (sequent) depths are the two depths across a hydraulic jump having the exact same specific force ( M 1 = M 2 M_1 = M_2 M 1 ​ = M 2 ​ ) , where mechanical energy is irreversibly lost ( E 1 > E 2 E_1 > E_2 E 1 ​ > E 2 ​ ).

Warning

Trap 2: Hydraulic Depth in Non-Rectangular Channels: For rectangular channels, D h = y D_h = y D h ​ = y . But for trapezoidal, triangular, or circular sections, you must use D h = A / T D_h = A / T D h ​ = A / T when computing the Froude number ( F r = v g D h Fr = \frac{v}{\sqrt{g D_h}} F r = g D h ​ ​ v ​ ). Substituting flow depth y y y instead of hydraulic depth A / T A/T A / T for non-rectangular channels will yield erroneous Froude numbers and critical depths.

Warning

Trap 3: Side Slope of Most Efficient Trapezoid: The hydraulically most efficient trapezoidal canal has a side slope of 60 ∘ 60^\circ 6 0 ∘ to the horizontal ( 1 V : 1 3 H 1\text{V}:\frac{1}{\sqrt{3}}\text{H} 1 V : 3 ​ 1 ​ H , so z = 1 / 3 ≈ 0.577 z = 1/\sqrt{3} \approx 0.577 z = 1/ 3 ​ ≈ 0.577 ). Candidates frequently mistake this for 45 ∘ 45^\circ 4 5 ∘ ( z = 1.0 z = 1.0 z = 1.0 ) or confuse vertical and horizontal slope components.

Loading diagram... Open Channel Flow Regimes, Specific Energy Dynamics, and Hydraulic Jump Transition