Study guide

16.2 Synchronous Motors & Special AC Machines

PRC Registered Electrical Engineer REE

Track your progress as you read

Finished sections get a check mark.

1 Chapter 1: Overview, RA 7920 & Electrical Engineering Ethics

1.1 PRC Board of Electrical Engineering & REE Examination Overview 1.2 Republic Act No. 7920 (New Electrical Engineering Law) & License Classes 1.3 Code of Ethics & Professional Practice for Electrical Engineers

2 Chapter 2: Math — Algebra, Trig & Geometry

2.1 Algebraic Equations, Polynomials & Complex Numbers 2.2 Trigonometry — Identities, Triangles & Spherical Trig 2.3 Analytic & Solid Geometry

3 Chapter 3: Engineering Mathematics — Calculus & Differential Equations

3.1 Differential Calculus, Limits, Derivatives & Applications 3.2 Integral Calculus, Integration Techniques & Area/Volume Applications 3.3 Ordinary Differential Equations & Initial-Value Problems

4 Chapter 4: Engineering Mathematics — Advanced Math & Transform Methods

4.1 Laplace Transforms, Inverse Transforms & Circuit Applications 4.2 Fourier Series, Fourier Transforms & Frequency-Domain Analysis 4.3 Vector Analysis, Linear Algebra, Matrices & Complex Analysis

5 Chapter 5: Engineering Mathematics — Probability, Statistics & Engineering Data Analysis

5.1 Probability Theory, Counting Techniques & Bayes' Theorem 5.2 Engineering Data Analysis I — Descriptive Statistics & Probability Distributions 5.3 Engineering Data Analysis II — Confidence Intervals, Hypothesis Testing & Regression

6 Chapter 6: Engineering Mathematics — Numerical Methods & Analysis

6.1 Numerical Root-Finding & Solution of Linear Systems 6.2 Interpolation, Numerical Integration & Numerical Solution of ODEs

7 Chapter 7: ESAS — Physics, Chemistry & Computer Fundamentals

7.1 Physics for Engineers 7.2 General Chemistry & Materials Science 7.3 Computer Fundamentals, Programming & Data Logic 7.4 Logic Circuits, Switching Theory & Microprocessor Systems

8 Chapter 8: ESAS — Mechanics & Thermal-Fluid Engineering

8.1 Engineering Mechanics — Statics & Dynamics 8.2 Strength of Materials & Mechanics of Deformable Bodies 8.3 Thermal-Fluid Engineering — Thermodynamics & Fluid Mechanics

9 Chapter 9: ESAS — Engineering Economics, Management & Contracts

9.1 Engineering Economics & Depreciation 9.2 Engineering Management & Ethics 9.3 Philippine Electrical Engineering Law, Code & Contracts 9.4 Technopreneurship 101 & Management of Engineering Projects

10 Chapter 10: PEC 1 — Safety, Sizing & Protection

10.1 PEC Fundamentals, Safety Standards & Grounding/Bonding 10.2 Conductor Sizing, Ampacity Adjustment & Voltage Drop 10.3 Overcurrent Protection, Branch Circuit & Feeder Sizing 10.4 Basic Occupational Safety & Health (BOSH) and Electrical Safety Standards

11 Chapter 11: PEC 1 & 2 — Equipment & Utility Systems

11.1 PEC Equipment Installation & Wiring Methods 11.2 Utility Systems, Transformers & Switchgear 11.3 Special Occupancies & Hazardous Locations

12 Chapter 12: Electrical Professional — DC & AC Circuit Fundamentals

12.1 DC Circuit Analysis & Network Theorems 12.2 Single-Phase AC Circuits & Phasor Analysis 12.3 Balanced & Unbalanced Three-Phase AC Circuits

13 Chapter 13: Electrical Professional — EM Fields & Transients

13.1 Electrostatics, Magnetostatics & Maxwell's Equations 13.2 Electromagnetic Waves & Transmission Line Fields 13.3 First-Order & Second-Order Circuit Transients

14 Chapter 14: Electrical Professional — Electronics, Industrial Electronics & Communications

14.1 Electronics 1 & 2 — Semiconductor Devices & Analog Circuits 14.2 Electrical Apparatus & Devices — Industrial Electronics & Power Converters 14.3 Fundamentals of Electronic Communications

15 Chapter 15: Electrical Professional — Transformers & DC Machines

15.1 Single-Phase & Three-Phase Transformers 15.2 Transformer Connections & Special Transformers 15.3 DC Generators & DC Motors

16 Chapter 16: Electrical Professional — AC Synchronous & Induction Machinery

16.1 Synchronous Generators (Alternators) 16.2 Synchronous Motors & Special AC Machines 16.3 Three-Phase & Single-Phase Induction Motors

17 Chapter 17: Electrical Professional — Power Plants & Energy Conversion

17.1 Hydroelectric, Thermal & Combined Cycle Power Plants 17.2 Renewable Energy Systems & Geothermal Power Plants 17.3 Power Plant Economics, Load Curves & Energy Conversion

18 Chapter 18: Electrical Professional — Transmission & Distribution

18.1 Transmission Line Parameters & Performance Models 18.2 Mechanical Overhead Line Design, Underground Cables & Insulators 18.3 Distribution Systems, Substation Layouts & Power Flow Control

19 Chapter 19: Electrical Professional — Power System Analysis

19.1 The Per-Unit System, Base Conversion & Impedance Diagrams 19.2 Symmetrical Components & Unbalanced Fault Analysis 19.3 Load Flow, Economic Dispatch & Power System Stability

20 Chapter 20: Electrical Professional — Protection, Control, Instrumentation & Illumination

20.1 Power System Protection & Protective Relaying 20.2 Industrial Motor Control, Logic Circuits & PLC Automation 20.3 Electrical Instrumentation, Transducers & Measurement Systems 20.4 Illumination Engineering, Lighting Design & Photometrics 20.5 Feedback Control Systems & Research Methods

16.2 Synchronous Motors & Special AC Machines

Key Takeaways Explain This Topic AI

Synchronous motors operate strictly at synchronous speed n s = 120 f P n_s = \frac{120 f}{P} n s ​ = P 120 f ​ at steady state, converting electrical power to mechanical power through magnetic locking between stator RMF and DC rotor field poles, yielding zero speed regulation.

V-curves and Inverted V-curves (Power Factor Control): Adjusting DC field excitation I f I_f I f ​ controls armature current magnitude I a I_a I a ​ and operating power factor cos ⁡ θ \cos \theta cos θ . Under-excitation results in lagging power factor (motor absorbs + Q +Q + Q ), normal excitation yields unity power factor, and over-excitation produces leading power factor (motor supplies − Q -Q − Q as a synchronous condenser).

Developed Mechanical Power & Torque: Internal power developed is P mech = 3 V p E p X s sin ⁡ δ − 3 I a 2 R a P_{\text{mech}} = \frac{3 V_p E_p}{X_s} \sin \delta - 3 I_a^2 R_a P mech ​ = X s ​ 3 V p ​ E p ​ ​ sin δ − 3 I a 2 ​ R a ​ (or 3 V p E p X s sin ⁡ δ \frac{3 V_p E_p}{X_s} \sin \delta X s ​ 3 V p ​ E p ​ ​ sin δ when R a ≈ 0 R_a \approx 0 R a ​ ≈ 0 ), with maximum pull-out torque occurring at power angle δ = 90 ∘ \delta = 90^\circ δ = 9 0 ∘ for cylindrical rotors.

Non-Self-Starting Nature & Hunting Phenomenon: Synchronous motors have zero starting torque due to high rotor inertia; they are started using embedded amortisseur (damper) windings as induction motors. Amortisseur windings also damp out hunting (rotor oscillations around equilibrium torque angle δ \delta δ ).

Special AC Machines: Permanent Magnet Synchronous Motors (PMSM), Switched Reluctance Motors (SRM), Brushless DC (BLDC), and AC Servomotors provide high torque density, precise positional control, and high operational efficiency across modern industrial automation and electric mobility applications.

Last updated: August 2026

  • 16.2 Synchronous Motors & Special AC Machines
  • Fundamental Operation & Phasor Dynamics

A synchronous motor is a doubly-excited AC machine that converts three-phase electrical power into mechanical shaft power. Its stator is connected to a 3-phase AC supply creating a rotating magnetic field (RMF) at synchronous speed n s = 120 f P n_s = \frac{120 f}{P} n s ​ = P 120 f ​ , while its rotor is energized with direct current (DC) to create fixed magnetic poles.

Magnetic Locking & Zero Speed Regulation

Once pulled into synchronism, the salient or non-salient rotor poles lock magnetically with the opposite-polarity rotating poles of the stator RMF. Consequently, the motor rotates strictly at synchronous speed under all steady-state load conditions from no-load up to breakdown pull-out torque: n r = n s = 120 f P ⟹ Speed Regulation = n nl − n fl n fl × 100 % = 0 % n_r = n_s = \frac{120 f}{P} \quad \implies \quad \text{Speed Regulation } = \frac{n_{\text{nl}} - n_{\text{fl}}}{n_{\text{fl}}} \times 100\% = 0\% n r ​ = n s ​ = P 120 f ​ ⟹ Speed Regulation = n fl ​ n nl ​ − n fl ​ ​ × 100% = 0%

Per-Phase Motor Voltage Equation

In motor operation, active electrical power enters the stator terminals against the internal counter-EMF (back-EMF) E p \mathbf{E}_p E p ​ induced by the rotating DC rotor flux. The per-phase phasor relationship is: V p = E p + I a Z s = E p + I a ( R a + j X s ) \mathbf{V}_p = \mathbf{E}_p + \mathbf{I}_a \mathbf{Z}_s = \mathbf{E}_p + \mathbf{I}_a (R_a + j X_s) V p ​ = E p ​ + I a ​ Z s ​ = E p ​ + I a ​ ( R a ​ + j X s ​ ) E p = V p − I a ( R a + j X s ) \mathbf{E}_p = \mathbf{V}_p - \mathbf{I}_a (R_a + j X_s) E p ​ = V p ​ − I a ​ ( R a ​ + j X s ​ )

where V p \mathbf{V}_p V p ​ is the applied phase voltage and E p \mathbf{E}_p E p ​ is the excitation back-EMF (whose magnitude is directly proportional to DC field current I f I_f I f ​ ). SYNCHRONOUS MOTOR PHASOR DIAGRAMS (PER-PHASE)

  • (A) Under-Excited (Lagging PF) (B) Normal Excitation (Unity PF) (C) Over-Excited (Leading PF)
  • Vp Vp Vp
  • ▲ ▲ ▲
  • │ / Ef │ / Ef │ / Ef
  • │ / │ / │ /
  • │/ δ │/ δ │/ δ
  • ────────┼─────────► ───────┼─────────► ───────┼─────────►
  • /│ │ /│
  • / │ │ / │
  • / │ Ia (lags) │ Ia (in phase) / │ Ia (leads)
  • ▼ ▼ ▼ ▼
  • Excitation Control: V-Curves & Synchronous Condensers

A unique operational feature of synchronous motors is that varying the DC field current I f I_f I f ​ alters the operating power factor without changing mechanical shaft speed or real power output.

Three Excitation Regimes at Constant Mechanical Load

Under-Excitation ( E p cos ⁡ δ < V p E_p \cos \delta < V_p E p ​ cos δ < V p ​ ) :

The rotor field flux is insufficient to maintain stator voltage balance, forcing the stator to draw lagging reactive magnetizing current ( + Q +Q + Q ) from the AC line.

Armature current I a \mathbf{I}_a I a ​ lags terminal voltage V p \mathbf{V}_p V p ​ (motor behaves like an inductive load).

Normal Excitation ( E p cos ⁡ δ = V p E_p \cos \delta = V_p E p ​ cos δ = V p ​ ) :

Field current I f I_f I f ​ is adjusted such that stator current I a \mathbf{I}_a I a ​ is in phase with V p \mathbf{V}_p V p ​ (unity power factor, cos ⁡ θ = 1.0 \cos \theta = 1.0 cos θ = 1.0 ).

Armature current magnitude I a I_a I a ​ reaches its absolute minimum for the given active power load.

Over-Excitation ( E p cos ⁡ δ > V p E_p \cos \delta > V_p E p ​ cos δ > V p ​ ) :

Excessive rotor field flux produces a back-EMF exceeding terminal voltage requirements. To counter this, the stator draws leading current (supplying − Q -Q − Q into the line).

Armature current I a \mathbf{I}_a I a ​ leads terminal voltage V p \mathbf{V}_p V p ​ (motor behaves like a capacitive bank).

V-Curves & Inverted V-Curves

V-Curves : Plots of armature current I a I_a I a ​ vs field current I f I_f I f ​ for various constant load power levels ( 0 % , 50 % , 100 % 0\%, 50\%, 100\% 0% , 50% , 100% full load). The curves form characteristic "V" shapes, with the minimum point representing unity power factor.

Inverted V-Curves : Plots of power factor cos ⁡ θ \cos \theta cos θ vs field current I f I_f I f ​ , forming inverted " Λ \Lambda Λ " peak curves reaching 1.0 1.0 1.0 at normal excitation.

Industrial Application: Synchronous Condensers

An over-excited synchronous motor operating completely un-loaded (zero shaft output power, P ≈ 0 P \approx 0 P ≈ 0 ) acts purely as a adjustable 3-phase capacitive bank supplying leading reactive kVAR to the power system. In industrial plants dominated by lagging induction motors, synchronous condensers are installed to improve overall plant power factor to 0.95 lagging 0.95\text{ lagging} 0.95 lagging or unity, avoiding utility low-power-factor penalties and reducing transmission line losses. Plant Q new = Q load − Q sync = P plant tan ⁡ θ target \text{Plant } Q_{\text{new}} = Q_{\text{load}} - Q_{\text{sync}} = P_{\text{plant}} \tan \theta_{\text{target}} Plant Q new ​ = Q load ​ − Q sync ​ = P plant ​ tan θ target ​

Developed Mechanical Power, Torque & Pull-Out Limits

The internal gross mechanical power developed per phase ( P mech,p P_{\text{mech,p}} P mech,p ​ ) by the rotor converted from electrical power is: P mech,3 ϕ = 3 E p I a cos ⁡ ( θ + δ ) = 3 V p E p Z s cos ⁡ ( θ s − δ ) − 3 E p 2 R a Z s 2 P_{\text{mech,3}\phi} = 3 E_p I_a \cos(\theta + \delta) = \frac{3 V_p E_p}{Z_s} \cos(\theta_s - \delta) - \frac{3 E_p^2 R_a}{Z_s^2} P mech,3 ϕ ​ = 3 E p ​ I a ​ cos ( θ + δ ) = Z s ​ 3 V p ​ E p ​ ​ cos ( θ s ​ − δ ) − Z s 2 ​ 3 E p 2 ​ R a ​ ​

where θ s = arctan ⁡ ( X s R a ) \theta_s = \arctan\left(\frac{X_s}{R_a}\right) θ s ​ = arctan ( R a ​ X s ​ ​ ) is the synchronous impedance angle and δ \delta δ is the power/torque angle.

When armature resistance is negligible ( R a ≈ 0 , Z s ≈ X s , θ s ≈ 90 ∘ R_a \approx 0, Z_s \approx X_s, \theta_s \approx 90^\circ R a ​ ≈ 0 , Z s ​ ≈ X s ​ , θ s ​ ≈ 9 0 ∘ ): P mech,3 ϕ = 3 V p E p X s sin ⁡ δ P_{\text{mech,3}\phi} = \frac{3 V_p E_p}{X_s} \sin \delta P mech,3 ϕ ​ = X s ​ 3 V p ​ E p ​ ​ sin δ T dev = P mech,3 ϕ ω s = 3 V p E p ω s X s sin ⁡ δ T_{\text{dev}} = \frac{P_{\text{mech,3}\phi}}{\omega_s} = \frac{3 V_p E_p}{\omega_s X_s} \sin \delta T dev ​ = ω s ​ P mech,3 ϕ ​ ​ = ω s ​ X s ​ 3 V p ​ E p ​ ​ sin δ

Breakdown (Pull-Out) Torque Limit

As mechanical load on the motor shaft increases, the torque angle δ \delta δ retards (increases in magnitude). Maximum developed mechanical power occurs at: For R a = 0 : δ max = 90 ∘ \text{For } R_a = 0: \quad \delta_{\text{max}} = 90^\circ For R a ​ = 0 : δ max ​ = 9 0 ∘ For non-zero R a : δ max = 180 ∘ − θ s = 90 ∘ + α ( where tan ⁡ α = R a X s ) \text{For non-zero } R_a: \quad \delta_{\text{max}} = 180^\circ - \theta_s = 90^\circ + \alpha \quad \left( \text{where } \tan \alpha = \frac{R_a}{X_s} \right) For non-zero R a ​ : δ max ​ = 18 0 ∘ − θ s ​ = 9 0 ∘ + α ( where tan α = X s ​ R a ​ ​ ) P mech,max = 3 [ V p E p Z s − E p 2 R a Z s 2 ] P_{\text{mech,max}} = 3 \left[ \frac{V_p E_p}{Z_s} - \frac{E_p^2 R_a}{Z_s^2} \right] P mech,max ​ = 3 [ Z s ​ V p ​ E p ​ ​ − Z s 2 ​ E p 2 ​ R a ​ ​ ]

If shaft load torque exceeds the maximum pull-out torque , magnetic locking snaps, the rotor loses synchronism, and heavy pulsing currents flow until protection relays trip the machine.

  • Starting Mechanics & Hunting Suppression
  • The Starting Problem

At standstill ( n r = 0 n_r = 0 n r ​ = 0 ), the stator RMF sweeps past the stationary rotor poles at full synchronous speed ( 3600 rpm 3600\text{ rpm} 3600 rpm or 1800 rpm 1800\text{ rpm} 1800 rpm ). Within one half-cycle ( 1 / 120 s 1/120\text{ s} 1/120 s at 60 Hz 60\text{ Hz} 60 Hz ), the torque direction reverses from forward to backward. Owing to high rotor mass inertia, the average starting torque is strictly zero ( T start = 0 T_{\text{start}} = 0 T start ​ = 0 ).

Practical Starting Methods

Amortisseur (Damper) Windings : Heavy copper bars embedded in rotor pole faces and short-circuited by end-rings (identical to a squirrel-cage rotor). The motor is started un-excited as an induction motor. When speed accelerates to 95 % − 98 % 95\% - 98\% 95% − 98% of synchronous speed, DC field excitation is energized, creating magnetic pull that locks the rotor into synchronism.

Auxiliary Pony Motor : A small induction motor coupled to the main shaft accelerates the rotor to synchronous speed before applying DC excitation and closing the main stator breaker.

Variable Frequency Drive (VFD) : The stator frequency f f f is started at 0 Hz 0\text{ Hz} 0 Hz and smoothly ramped up, keeping stator RMF locked to the rotor from standstill.

The Hunting Phenomenon & Damper Winding Action

When mechanical load suddenly changes or grid frequency fluctuates, the rotor torque angle δ \delta δ overshoots its new steady-state equilibrium value, causing the rotor to oscillate back and forth around ω s \omega_s ω s ​ . This dynamic instability is called hunting .

Damper Winding Hunting Suppression: During steady-state synchronous rotation ( n r = n s n_r = n_s n r ​ = n s ​ ), damper bars rotate at the exact speed of the RMF, so no EMF or current is induced in them. When hunting occurs ( n r ≠ n s n_r \neq n_s n r ​  = n s ​ ), relative motion between the damper bars and the RMF induces heavy eddy currents in the damper winding. By Lenz's law, these currents create damping torque that rapidly dissipates oscillation energy as I 2 R I^2 R I 2 R heat, suppressing hunting within a few cycles.

Special AC Machines & Drive Systems

Machine Type Construction & Operating Principle Key Performance Advantages Primary Applications

Permanent Magnet Synchronous Motor (PMSM) Stator 3-phase AC winding; rotor fitted with high-coercivity NdFeB permanent magnets (surface or interior IPM). Operates at n s n_s n s ​ . Eliminates rotor I 2 R I^2 R I 2 R field losses; extremely high power density and efficiency ( > 96 % >96\% > 96% ). Electric Vehicles (EV traction), HVAC inverter drives, industrial robotics

Switched Reluctance Motor (SRM) Doubly salient construction (stator and rotor both have projecting teeth); no permanent magnets or rotor windings. Torque produced by variable reluctance alignment. Ultra-rugged construction; high starting torque; fault-tolerant operating capability. High-speed centrifugal pumps, vacuum blowers, harsh industrial mining drives

Brushless DC Motor (BLDC) Permanent magnet rotor; trapezoidal back-EMF stator energized by DC power through an inverter commutated via Hall sensors. High speed capability; zero brush maintenance; high torque-to-inertia ratio. Computer hard drives, cooling fans, drone propulsion, precision medical tools

AC Servomotor Two-phase or three-phase low-inertia rotor with high rotor winding resistance ( R 2 R_2 R 2 ​ ). Strictly linear torque-speed curve; zero negative damping / no creeping; rapid dynamic response. CNC machine positioning, closed-loop feedback flight control actuators

Loading diagram... Synchronous Motor V-Curve & Operating Power Factor Control Regimes

Synchronous Motor Stator Armature Current Ia (Amperes) vs Field Current If (V-Curve at Full Load)