Study guide

16.3 Three-Phase & Single-Phase Induction Motors

PRC Registered Electrical Engineer REE

Track your progress as you read

Finished sections get a check mark.

1 Chapter 1: Overview, RA 7920 & Electrical Engineering Ethics

1.1 PRC Board of Electrical Engineering & REE Examination Overview 1.2 Republic Act No. 7920 (New Electrical Engineering Law) & License Classes 1.3 Code of Ethics & Professional Practice for Electrical Engineers

2 Chapter 2: Math — Algebra, Trig & Geometry

2.1 Algebraic Equations, Polynomials & Complex Numbers 2.2 Trigonometry — Identities, Triangles & Spherical Trig 2.3 Analytic & Solid Geometry

3 Chapter 3: Engineering Mathematics — Calculus & Differential Equations

3.1 Differential Calculus, Limits, Derivatives & Applications 3.2 Integral Calculus, Integration Techniques & Area/Volume Applications 3.3 Ordinary Differential Equations & Initial-Value Problems

4 Chapter 4: Engineering Mathematics — Advanced Math & Transform Methods

4.1 Laplace Transforms, Inverse Transforms & Circuit Applications 4.2 Fourier Series, Fourier Transforms & Frequency-Domain Analysis 4.3 Vector Analysis, Linear Algebra, Matrices & Complex Analysis

5 Chapter 5: Engineering Mathematics — Probability, Statistics & Engineering Data Analysis

5.1 Probability Theory, Counting Techniques & Bayes' Theorem 5.2 Engineering Data Analysis I — Descriptive Statistics & Probability Distributions 5.3 Engineering Data Analysis II — Confidence Intervals, Hypothesis Testing & Regression

6 Chapter 6: Engineering Mathematics — Numerical Methods & Analysis

6.1 Numerical Root-Finding & Solution of Linear Systems 6.2 Interpolation, Numerical Integration & Numerical Solution of ODEs

7 Chapter 7: ESAS — Physics, Chemistry & Computer Fundamentals

7.1 Physics for Engineers 7.2 General Chemistry & Materials Science 7.3 Computer Fundamentals, Programming & Data Logic 7.4 Logic Circuits, Switching Theory & Microprocessor Systems

8 Chapter 8: ESAS — Mechanics & Thermal-Fluid Engineering

8.1 Engineering Mechanics — Statics & Dynamics 8.2 Strength of Materials & Mechanics of Deformable Bodies 8.3 Thermal-Fluid Engineering — Thermodynamics & Fluid Mechanics

9 Chapter 9: ESAS — Engineering Economics, Management & Contracts

9.1 Engineering Economics & Depreciation 9.2 Engineering Management & Ethics 9.3 Philippine Electrical Engineering Law, Code & Contracts 9.4 Technopreneurship 101 & Management of Engineering Projects

10 Chapter 10: PEC 1 — Safety, Sizing & Protection

10.1 PEC Fundamentals, Safety Standards & Grounding/Bonding 10.2 Conductor Sizing, Ampacity Adjustment & Voltage Drop 10.3 Overcurrent Protection, Branch Circuit & Feeder Sizing 10.4 Basic Occupational Safety & Health (BOSH) and Electrical Safety Standards

11 Chapter 11: PEC 1 & 2 — Equipment & Utility Systems

11.1 PEC Equipment Installation & Wiring Methods 11.2 Utility Systems, Transformers & Switchgear 11.3 Special Occupancies & Hazardous Locations

12 Chapter 12: Electrical Professional — DC & AC Circuit Fundamentals

12.1 DC Circuit Analysis & Network Theorems 12.2 Single-Phase AC Circuits & Phasor Analysis 12.3 Balanced & Unbalanced Three-Phase AC Circuits

13 Chapter 13: Electrical Professional — EM Fields & Transients

13.1 Electrostatics, Magnetostatics & Maxwell's Equations 13.2 Electromagnetic Waves & Transmission Line Fields 13.3 First-Order & Second-Order Circuit Transients

14 Chapter 14: Electrical Professional — Electronics, Industrial Electronics & Communications

14.1 Electronics 1 & 2 — Semiconductor Devices & Analog Circuits 14.2 Electrical Apparatus & Devices — Industrial Electronics & Power Converters 14.3 Fundamentals of Electronic Communications

15 Chapter 15: Electrical Professional — Transformers & DC Machines

15.1 Single-Phase & Three-Phase Transformers 15.2 Transformer Connections & Special Transformers 15.3 DC Generators & DC Motors

16 Chapter 16: Electrical Professional — AC Synchronous & Induction Machinery

16.1 Synchronous Generators (Alternators) 16.2 Synchronous Motors & Special AC Machines 16.3 Three-Phase & Single-Phase Induction Motors

17 Chapter 17: Electrical Professional — Power Plants & Energy Conversion

17.1 Hydroelectric, Thermal & Combined Cycle Power Plants 17.2 Renewable Energy Systems & Geothermal Power Plants 17.3 Power Plant Economics, Load Curves & Energy Conversion

18 Chapter 18: Electrical Professional — Transmission & Distribution

18.1 Transmission Line Parameters & Performance Models 18.2 Mechanical Overhead Line Design, Underground Cables & Insulators 18.3 Distribution Systems, Substation Layouts & Power Flow Control

19 Chapter 19: Electrical Professional — Power System Analysis

19.1 The Per-Unit System, Base Conversion & Impedance Diagrams 19.2 Symmetrical Components & Unbalanced Fault Analysis 19.3 Load Flow, Economic Dispatch & Power System Stability

20 Chapter 20: Electrical Professional — Protection, Control, Instrumentation & Illumination

20.1 Power System Protection & Protective Relaying 20.2 Industrial Motor Control, Logic Circuits & PLC Automation 20.3 Electrical Instrumentation, Transducers & Measurement Systems 20.4 Illumination Engineering, Lighting Design & Photometrics 20.5 Feedback Control Systems & Research Methods

16.3 Three-Phase & Single-Phase Induction Motors

Key Takeaways Explain This Topic AI

Fractional slip s = n s − n r n s s = \frac{n_s - n_r}{n_s} s = n s ​ n s ​ − n r ​ ​ dictates induction motor operation, where rotor frequency is f r = s f f_r = s f f r ​ = s f , standstill induced EMF E 2 E_2 E 2 ​ scales to s E 2 s E_2 s E 2 ​ , and standstill rotor reactance X 2 X_2 X 2 ​ scales to s X 2 s X_2 s X 2 ​ .

Power flow and loss distribution follow the fundamental ratio P ag : P cu2 : P mech = 1 : s : ( 1 − s ) P_{\text{ag}} : P_{\text{cu2}} : P_{\text{mech}} = 1 : s : (1-s) P ag ​ : P cu2 ​ : P mech ​ = 1 : s : ( 1 − s ) , where air-gap power is P ag = 3 I 2 ′ 2 R 2 ′ s P_{\text{ag}} = 3 I_2'^2 \frac{R_2'}{s} P ag ​ = 3 I 2 ′2 ​ s R 2 ′ ​ ​ , rotor copper loss is P cu2 = s P ag P_{\text{cu2}} = s P_{\text{ag}} P cu2 ​ = s P ag ​ , and converted mechanical power is P mech = ( 1 − s ) P ag P_{\text{mech}} = (1-s) P_{\text{ag}} P mech ​ = ( 1 − s ) P ag ​ .

Developed electromagnetic torque equation is T e = 3 ω s V 1 2 ( R 2 ′ / s ) ( R 1 + R 2 ′ / s ) 2 + ( X 1 + X 2 ′ ) 2 T_e = \frac{3}{\omega_s} \frac{V_1^2 (R_2' / s)}{(R_1 + R_2'/s)^2 + (X_1 + X_2')^2} T e ​ = ω s ​ 3 ​ ( R 1 ​ + R 2 ′ ​ / s ) 2 + ( X 1 ​ + X 2 ′ ​ ) 2 V 1 2 ​ ( R 2 ′ ​ / s ) ​ . Peak breakdown torque T max ≈ 3 2 ω s V 1 2 2 ( X 1 + X 2 ′ ) T_{\text{max}} \approx \frac{3}{2 \omega_s} \frac{V_1^2}{2(X_1 + X_2')} T max ​ ≈ 2 ω s ​ 3 ​ 2 ( X 1 ​ + X 2 ′ ​ ) V 1 2 ​ ​ is independent of rotor resistance R 2 ′ R_2' R 2 ′ ​ , but the slip at maximum torque s max = R 2 ′ R 1 2 + ( X 1 + X 2 ′ ) 2 s_{\text{max}} = \frac{R_2'}{\sqrt{R_1^2 + (X_1 + X_2')^2}} s max ​ = R 1 2 ​ + ( X 1 ​ + X 2 ′ ​ ) 2 ​ R 2 ′ ​ ​ scales directly with R 2 ′ R_2' R 2 ′ ​ .

Starting methods for 3-phase motors include Direct-on-line (DOL), Star-Delta (reducing line current and starting torque to 1 3 \frac{1}{3} 3 1 ​ of DOL values), Autotransformer (scaling current and torque by k 2 k^2 k 2 ), Soft Starter, and Rotor Resistance (Wound-Rotor).

Single-phase induction motors lack inherent starting torque per double-revolving field theory (equal forward and backward torques at s = 1 s=1 s = 1 ). Starting is enabled via auxiliary windings or phase-shifting capacitors (split-phase, capacitor-start, capacitor-run, and shaded-pole configurations).

Last updated: August 2026

  • 16.3 Three-Phase & Single-Phase Induction Motors
  • Operating Principles & Slip Mechanics

The three-phase induction motor is the most widely utilized electric motor in modern industrial plants due to its rugged self-starting construction, high reliability, and low cost. It operates on the principle of electromagnetic induction without requiring electrical connections to the rotor.

Creation of Stator Rotating Magnetic Field (RMF)

When balanced 3-phase AC currents flow through stator windings physically displaced by 120 ∘ 120^\circ 12 0 ∘ electrical around the stator frame, they establish a rotating magnetic field of constant magnitude B net = 1.5 B m B_{\text{net}} = 1.5 B_m B net ​ = 1.5 B m ​ rotating at synchronous speed: n s = 120 f P [ rpm ] n_s = \frac{120 f}{P} \quad [\text{rpm}] n s ​ = P 120 f ​ [ rpm ]

Induction of Rotor Current & Slip Definition

The relative motion between the stator RMF ( n s n_s n s ​ ) and the stationary rotor conductors ( n r = 0 n_r = 0 n r ​ = 0 ) cuts rotor bars, inducing an electromotive force ( e 2 e_2 e 2 ​ ) by Faraday's law. Because rotor bars are short-circuited by end-rings, heavy rotor currents ( i 2 i_2 i 2 ​ ) flow. Interaction between i 2 i_2 i 2 ​ and the RMF produces electromagnetic torque ( T e T_e T e ​ ) accelerating the rotor in the direction of the RMF (Lenz's law).

The fractional difference between synchronous speed n s n_s n s ​ and actual rotor speed n r n_r n r ​ is defined as slip ( s s s ): s = n s − n r n s ⟹ n r = ( 1 − s ) n s s = \frac{n_s - n_r}{n_s} \quad \implies \quad n_r = (1 - s) n_s s = n s ​ n s ​ − n r ​ ​ ⟹ n r ​ = ( 1 − s ) n s ​

At standstill ( n r = 0 n_r = 0 n r ​ = 0 ): Slip s = 1.0 s = 1.0 s = 1.0 ( 100 % 100\% 100% slip).

At synchronous speed ( n r = n s n_r = n_s n r ​ = n s ​ ): Slip s = 0 s = 0 s = 0 . (Flux cutting ceases, e 2 = 0 , i 2 = 0 , T e = 0 e_2 = 0, i_2 = 0, T_e = 0 e 2 ​ = 0 , i 2 ​ = 0 , T e ​ = 0 ; hence an induction motor can never reach n s n_s n s ​ ).

Rotor frequency: f r = s f f_r = s f f r ​ = s f .

Running induced rotor EMF: E 2 r = s E 2 E_{2r} = s E_2 E 2 r ​ = s E 2 ​ .

Running rotor reactance: X 2 r = s X 2 X_{2r} = s X_2 X 2 r ​ = s X 2 ​ .

Per-Phase Equivalent Circuit & Power Flow Balance

To analyze performance, the rotor circuit operating at frequency f r f_r f r ​ is transformed to the primary stator frequency f f f by dividing the rotor parameters by s s s : I 2 ′ = E 2 ′ ( R 2 ′ s ) 2 + ( X 2 ′ ) 2 \mathbf{I}_2' = \frac{E_2'}{\sqrt{\left(\frac{R_2'}{s}\right)^2 + (X_2')^2}} I 2 ′ ​ = ( s R 2 ′ ​ ​ ) 2 + ( X 2 ′ ​ ) 2 ​ E 2 ′ ​ ​

The total equivalent rotor resistance is split into two components: R 2 ′ s = R 2 ′ + ( 1 − s s ) R 2 ′ \frac{R_2'}{s} = R_2' + \left( \frac{1 - s}{s} \right) R_2' s R 2 ′ ​ ​ = R 2 ′ ​ + ( s 1 − s ​ ) R 2 ′ ​

R 2 ′ R_2' R 2 ′ ​ represents actual physical rotor winding I 2 R I^2 R I 2 R copper losses.

( 1 − s s ) R 2 ′ \left( \frac{1 - s}{s} \right) R_2' ( s 1 − s ​ ) R 2 ′ ​ represents the electrical equivalent of the mechanical shaft load . INDUCTION MOTOR PER-PHASE EQUIVALENT CIRCUIT

  • I1 ───► R1 X1 R'2 X'2 ───► I'2
  • ───────────█████──────UUUUUU───────┬───────█████──────UUUUUU──────────────┐
  • │ │
  • I0 │ ███ [(1-s)/s] R'2
  • ┌───┴───┐ ███ (Mechanical
  • Ic │ │ Im │ Load)
  • ███ UUU │
  • Rc ███ Xm UUU │
  • │ │ │
  • ───────────────────────────────┴───────┴──────────────────────────────────┴┘
  • Stages of Power Flow in 3-Phase Induction Motors

Stator Electrical Input Power : P in = 3 V L I L cos ⁡ θ P_{\text{in}} = \sqrt{3} V_L I_L \cos \theta P in ​ = 3 ​ V L ​ I L ​ cos θ

Stator Losses : Stator Copper Loss P cu1 = 3 I 1 2 R 1 P_{\text{cu1}} = 3 I_1^2 R_1 P cu1 ​ = 3 I 1 2 ​ R 1 ​ , Stator Core Loss P i P_i P i ​

Air-Gap Power ( P ag P_{\text{ag}} P ag ​ ) : Power transferred electromagnetically from stator to rotor across the air gap: P ag = P in − P cu1 − P i = 3 ( I 2 ′ ) 2 R 2 ′ s P_{\text{ag}} = P_{\text{in}} - P_{\text{cu1}} - P_i = 3 (I_2')^2 \frac{R_2'}{s} P ag ​ = P in ​ − P cu1 ​ − P i ​ = 3 ( I 2 ′ ​ ) 2 s R 2 ′ ​ ​

Rotor Copper Loss ( P cu2 P_{\text{cu2}} P cu2 ​ ) : Internal ohmic heating in rotor conductors: P cu2 = 3 ( I 2 ′ ) 2 R 2 ′ = s P ag P_{\text{cu2}} = 3 (I_2')^2 R_2' = s P_{\text{ag}} P cu2 ​ = 3 ( I 2 ′ ​ ) 2 R 2 ′ ​ = s P ag ​

Gross Mechanical Power Developed ( P mech P_{\text{mech}} P mech ​ ) : Power converted into rotational mechanical form: P mech = P ag − P cu2 = ( 1 − s ) P ag = 3 ( I 2 ′ ) 2 R 2 ′ ( 1 − s s ) P_{\text{mech}} = P_{\text{ag}} - P_{\text{cu2}} = (1 - s) P_{\text{ag}} = 3 (I_2')^2 R_2' \left( \frac{1 - s}{s} \right) P mech ​ = P ag ​ − P cu2 ​ = ( 1 − s ) P ag ​ = 3 ( I 2 ′ ​ ) 2 R 2 ′ ​ ( s 1 − s ​ )

Net Shaft Power ( P shaft P_{\text{shaft}} P shaft ​ ) : Output power available at the mechanical shaft coupling: P shaft = P mech − P rotational ( P rotational = P friction + P windage + P stray ) P_{\text{shaft}} = P_{\text{mech}} - P_{\text{rotational}} \quad (P_{\text{rotational}} = P_{\text{friction}} + P_{\text{windage}} + P_{\text{stray}}) P shaft ​ = P mech ​ − P rotational ​ ( P rotational ​ = P friction ​ + P windage ​ + P stray ​ )

Fundamental Power Ratio Mandate: P ag : P cu2 : P mech = 1 : s : ( 1 − s ) P_{\text{ag}} : P_{\text{cu2}} : P_{\text{mech}} = 1 : s : (1 - s) P ag ​ : P cu2 ​ : P mech ​ = 1 : s : ( 1 − s ) Rotor Conversion Efficiency: η rotor = P mech P ag = 1 − s \eta_{\text{rotor}} = \frac{P_{\text{mech}}}{P_{\text{ag}}} = 1 - s η rotor ​ = P ag ​ P mech ​ ​ = 1 − s

Torque-Slip Characteristics & NEMA Motor Design Classes

The developed electromagnetic torque as a function of slip s s s is: T e = P ag ω s = 3 ω s [ V 1 2 ( R 2 ′ s ) ( R 1 + R 2 ′ s ) 2 + ( X 1 + X 2 ′ ) 2 ] T_e = \frac{P_{\text{ag}}}{\omega_s} = \frac{3}{\omega_s} \left[ \frac{V_1^2 \left(\frac{R_2'}{s}\right)}{\left(R_1 + \frac{R_2'}{s}\right)^2 + (X_1 + X_2')^2} \right] T e ​ = ω s ​ P ag ​ ​ = ω s ​ 3 ​ ​ ( R 1 ​ + s R 2 ′ ​ ​ ) 2 + ( X 1 ​ + X 2 ′ ​ ) 2 V 1 2 ​ ( s R 2 ′ ​ ​ ) ​ ​ 3-PHASE INDUCTION MOTOR TORQUE-SLIP CURVE

  • Torque T ▲
  • │ Breakdown / Peak Torque Tmax
  • │ ┌───────┐
  • │ ╱ ╲
  • │ ╱ ╲
  • │ ╱ ╲
  • Tstart ───┼─► █ ╱ ╲
  • │ █ ╱ ╲ Low-Slip Normal
  • │ █ ╱ ╲ Operating Region (Linear)
  • │ █ ╱ ───────────
  • └───┴────────────┴──────────────────────────┴──────────────► Slip s
  • s=1.0 s = s_max s=0
  • (Standstill) (Breakdown Slip) (Synchronous Speed)
  • Peak Breakdown (Pull-Out) Torque ( T max T_{\text{max}} T max ​ )

By differentiation d T e d s = 0 \frac{dT_e}{ds} = 0 d s d T e ​ ​ = 0 , maximum torque and its corresponding breakdown slip s max s_{\text{max}} s max ​ are: s max = R 2 ′ R 1 2 + ( X 1 + X 2 ′ ) 2 ≈ R 2 ′ X 1 + X 2 ′ s_{\text{max}} = \frac{R_2'}{\sqrt{R_1^2 + (X_1 + X_2')^2}} \approx \frac{R_2'}{X_1 + X_2'} s max ​ = R 1 2 ​ + ( X 1 ​ + X 2 ′ ​ ) 2 ​ R 2 ′ ​ ​ ≈ X 1 ​ + X 2 ′ ​ R 2 ′ ​ ​ T max = 3 2 ω s [ V 1 2 R 1 + R 1 2 + ( X 1 + X 2 ′ ) 2 ] ≈ 3 2 ω s [ V 1 2 2 ( X 1 + X 2 ′ ) ] T_{\text{max}} = \frac{3}{2 \omega_s} \left[ \frac{V_1^2}{R_1 + \sqrt{R_1^2 + (X_1 + X_2')^2}} \right] \approx \frac{3}{2 \omega_s} \left[ \frac{V_1^2}{2(X_1 + X_2')} \right] T max ​ = 2 ω s ​ 3 ​ [ R 1 ​ + R 1 2 ​ + ( X 1 ​ + X 2 ′ ​ ) 2 ​ V 1 2 ​ ​ ] ≈ 2 ω s ​ 3 ​ [ 2 ( X 1 ​ + X 2 ′ ​ ) V 1 2 ​ ​ ]

Critical Engineering Principle: Peak breakdown torque magnitude T max T_{\text{max}} T max ​ is completely independent of rotor resistance R 2 ′ R_2' R 2 ′ ​ . However, the slip s max s_{\text{max}} s max ​ at which peak torque occurs is directly proportional to R 2 ′ R_2' R 2 ′ ​ . Increasing rotor resistance shifts the peak torque toward standstill ( s = 1.0 s = 1.0 s = 1.0 ), augmenting starting torque without altering maximum torque capacity.

NEMA Motor Design Classifications

NEMA Class Starting Torque (% Rated) Starting Current (% Rated) Breakdown Torque (% Rated) Full-Load Slip Rotor Construction & Target Applications

Class A 150 % − 170 % 150\% - 170\% 150% − 170% High ( 500 % − 800 % 500\% - 800\% 500% − 800% ) 200 % − 250 % 200\% - 250\% 200% − 250% Low ( < 5 % < 5\% < 5% ) Standard single cage; machine tools, blowers, centrifugal pumps

Class B 130 % − 160 % 130\% - 160\% 130% − 160% Medium ( 400 % − 500 % 400\% - 500\% 400% − 500% ) 200 % − 250 % 200\% - 250\% 200% − 250% Low ( < 5 % < 5\% < 5% ) Deep-bar rotor (skin effect increases start R 2 R_2 R 2 ​ ); Standard Industrial Workhorse

Class C High ( 200 % − 250 % 200\% - 250\% 200% − 250% ) Medium ( 400 % − 500 % 400\% - 500\% 400% − 500% ) 190 % − 225 % 190\% - 225\% 190% − 225% Low ( < 5 % < 5\% < 5% ) Double-cage rotor (outer high- R R R bar for start, inner high- X X X bar for run); crushers, conveyors

Class D Extra High ( 275 % + 275\%+ 275% + ) Low ( 300 % − 400 % 300\% - 400\% 300% − 400% ) 275 % + 275\%+ 275% + at s = 1 s=1 s = 1 High ( 5 % − 13 % 5\% - 13\% 5% − 13% ) High-resistance brass rotor bars; punch presses, shears, hoists, elevators

3-Phase Motor Starting Methods

Across starting, locked-rotor currents reach 500 % − 800 % 500\% - 800\% 500% − 800% of rated full-load current. Standard starting schemes reduce line voltage or adjust impedance:

Direct-On-Line (DOL) Starting : 100 % 100\% 100% full voltage applied. Max starting torque ( 100 % T start,DOL 100\% T_{\text{start,DOL}} 100% T start,DOL ​ ), but severe inrush current.

Star-Delta ( Y- Δ \text{Y-}\Delta Y- Δ ) Starter : Motor windings are connected in Star during starting, then switched to Delta during running. V phase,Y = V line 3 ⟹ I line,start,Y = 1 3 I line,start,DOL , T start,Y = 1 3 T start,DOL V_{\text{phase,Y}} = \frac{V_{\text{line}}}{\sqrt{3}} \quad \implies \quad I_{\text{line,start,Y}} = \frac{1}{3} I_{\text{line,start,DOL}}, \quad T_{\text{start,Y}} = \frac{1}{3} T_{\text{start,DOL}} V phase,Y ​ = 3 ​ V line ​ ​ ⟹ I line,start,Y ​ = 3 1 ​ I line,start,DOL ​ , T start,Y ​ = 3 1 ​ T start,DOL ​

Autotransformer Starter : Taps provide reduced fraction k k k (e.g. k = 0.80 k = 0.80 k = 0.80 or 80 % 80\% 80% ) of line voltage. I motor,start = k I DOL , I line,start = k 2 I DOL , T start = k 2 T start,DOL I_{\text{motor,start}} = k I_{\text{DOL}}, \quad I_{\text{line,start}} = k^2 I_{\text{DOL}}, \quad T_{\text{start}} = k^2 T_{\text{start,DOL}} I motor,start ​ = k I DOL ​ , I line,start ​ = k 2 I DOL ​ , T start ​ = k 2 T start,DOL ​

Rotor Resistance Starting (Wound-Rotor Motors) : External resistors connected to rotor slip rings add R ext ′ R_{\text{ext}}' R ext ′ ​ to rotor circuit, setting s max = 1.0 s_{\text{max}} = 1.0 s max ​ = 1.0 to achieve T start = T max T_{\text{start}} = T_{\text{max}} T start ​ = T max ​ while maintaining low starting current.

Single-Phase Induction Motors & Starting Topologies

Single-phase induction motors are widely used in home appliances, HVAC, and commercial equipment where 3-phase power is unavailable.

Double-Revolving Field Theory

A single-phase pulsating magnetic flux B ( t ) = B m cos ⁡ ( ω t ) B(t) = B_m \cos(\omega t) B ( t ) = B m ​ cos ( ω t ) does not rotate naturally. According to Ferrari's double-revolving field theory , a pulsating field resolves into two counter-rotating fields of equal magnitude B f = B b = B m 2 B_f = B_b = \frac{B_m}{2} B f ​ = B b ​ = 2 B m ​ ​ rotating at + n s +n_s + n s ​ and − n s -n_s − n s ​ . s f = s , s b = 2 − s s_f = s, \quad s_b = 2 - s s f ​ = s , s b ​ = 2 − s

At standstill ( n r = 0 , s = 1.0 n_r = 0, s = 1.0 n r ​ = 0 , s = 1.0 ), forward slip s f = 1.0 s_f = 1.0 s f ​ = 1.0 and backward slip s b = 1.0 s_b = 1.0 s b ​ = 1.0 . The forward torque and backward torque are exactly equal and opposite ( T f = T b T_f = T_b T f ​ = T b ​ ), resulting in zero net starting torque ( T start = 0 T_{\text{start}} = 0 T start ​ = 0 ). SINGLE-PHASE INDUCTION MOTOR STARTING TOPOLOGIES

  • (A) Split-Phase (B) Capacitor-Start (C) Permanent-Split Capacitor
  • Main Winding Main Winding Main Winding
  • ┌───███████───┐ ┌───███████───┐ ┌───███████───┐
  • │ │ │ │ │ │
  • L ├─████─┬─ ──┤ N L ├─████─┬─ ──┤ N L ├─████─┬─ ──┤ N
  • │ Aux │ Centrifugal │ Aux │ Centrifugal │ Aux │
  • │ Wind └─o/ o─┘ │ Wind ├──┤├───o/ o─┘ │ Wind ├──┤├──┐
  • │ │ │ C_start │ │ C │
  • └─────────────────────────────┴──────┴────────────────────────┴──────┴───┴──┘
  • Single-Phase Starting Methods

Split-Phase Motor : Aux winding (high resistance, low reactance) in parallel with main winding (low resistance, high reactance) creates a ∼ 30 ∘ \sim 30^\circ ∼ 3 0 ∘ phase shift. Centrifugal switch opens aux winding at 75 % 75\% 75% speed. Moderate starting torque.

Capacitor-Start Motor : Heavy-duty electrolytic capacitor in series with aux winding creates a near 90 ∘ 90^\circ 9 0 ∘ phase shift. Centrifugal switch disconnects aux circuit at 75 % 75\% 75% speed. High starting torque ( 300 % − 450 % 300\% - 450\% 300% − 450% ).

Permanent-Split Capacitor (PSC) Motor : Run capacitor remains permanently in series with aux winding. No centrifugal switch. Quiet operation, low starting torque, high running power factor.

Two-Value (Capacitor-Start, Capacitor-Run) Motor : Employs large start capacitor for initial high torque and small run capacitor for high running efficiency.

Shaded-Pole Motor : Salient poles fitted with a copper shorting ring (shading coil) across part of each pole face. Delays flux in shaded segment, creating a weak rotating field. Lowest starting torque and efficiency ( 20 % − 40 % 20\% - 40\% 20% − 40% ); used in small desk fans and blowers.

Loading diagram... Power Flow and Loss Conversion Stages in a Three-Phase Induction Motor

NEMA Class B Induction Motor Developed Torque (% Rated Torque) vs Slip s