Study guide

3.1 Differential Calculus, Limits, Derivatives & Applications

PRC Registered Electrical Engineer REE

Track your progress as you read

Finished sections get a check mark.

1 Chapter 1: Overview, RA 7920 & Electrical Engineering Ethics

1.1 PRC Board of Electrical Engineering & REE Examination Overview 1.2 Republic Act No. 7920 (New Electrical Engineering Law) & License Classes 1.3 Code of Ethics & Professional Practice for Electrical Engineers

2 Chapter 2: Math — Algebra, Trig & Geometry

2.1 Algebraic Equations, Polynomials & Complex Numbers 2.2 Trigonometry — Identities, Triangles & Spherical Trig 2.3 Analytic & Solid Geometry

3 Chapter 3: Engineering Mathematics — Calculus & Differential Equations

3.1 Differential Calculus, Limits, Derivatives & Applications 3.2 Integral Calculus, Integration Techniques & Area/Volume Applications 3.3 Ordinary Differential Equations & Initial-Value Problems

4 Chapter 4: Engineering Mathematics — Advanced Math & Transform Methods

4.1 Laplace Transforms, Inverse Transforms & Circuit Applications 4.2 Fourier Series, Fourier Transforms & Frequency-Domain Analysis 4.3 Vector Analysis, Linear Algebra, Matrices & Complex Analysis

5 Chapter 5: Engineering Mathematics — Probability, Statistics & Engineering Data Analysis

5.1 Probability Theory, Counting Techniques & Bayes' Theorem 5.2 Engineering Data Analysis I — Descriptive Statistics & Probability Distributions 5.3 Engineering Data Analysis II — Confidence Intervals, Hypothesis Testing & Regression

6 Chapter 6: Engineering Mathematics — Numerical Methods & Analysis

6.1 Numerical Root-Finding & Solution of Linear Systems 6.2 Interpolation, Numerical Integration & Numerical Solution of ODEs

7 Chapter 7: ESAS — Physics, Chemistry & Computer Fundamentals

7.1 Physics for Engineers 7.2 General Chemistry & Materials Science 7.3 Computer Fundamentals, Programming & Data Logic 7.4 Logic Circuits, Switching Theory & Microprocessor Systems

8 Chapter 8: ESAS — Mechanics & Thermal-Fluid Engineering

8.1 Engineering Mechanics — Statics & Dynamics 8.2 Strength of Materials & Mechanics of Deformable Bodies 8.3 Thermal-Fluid Engineering — Thermodynamics & Fluid Mechanics

9 Chapter 9: ESAS — Engineering Economics, Management & Contracts

9.1 Engineering Economics & Depreciation 9.2 Engineering Management & Ethics 9.3 Philippine Electrical Engineering Law, Code & Contracts 9.4 Technopreneurship 101 & Management of Engineering Projects

10 Chapter 10: PEC 1 — Safety, Sizing & Protection

10.1 PEC Fundamentals, Safety Standards & Grounding/Bonding 10.2 Conductor Sizing, Ampacity Adjustment & Voltage Drop 10.3 Overcurrent Protection, Branch Circuit & Feeder Sizing 10.4 Basic Occupational Safety & Health (BOSH) and Electrical Safety Standards

11 Chapter 11: PEC 1 & 2 — Equipment & Utility Systems

11.1 PEC Equipment Installation & Wiring Methods 11.2 Utility Systems, Transformers & Switchgear 11.3 Special Occupancies & Hazardous Locations

12 Chapter 12: Electrical Professional — DC & AC Circuit Fundamentals

12.1 DC Circuit Analysis & Network Theorems 12.2 Single-Phase AC Circuits & Phasor Analysis 12.3 Balanced & Unbalanced Three-Phase AC Circuits

13 Chapter 13: Electrical Professional — EM Fields & Transients

13.1 Electrostatics, Magnetostatics & Maxwell's Equations 13.2 Electromagnetic Waves & Transmission Line Fields 13.3 First-Order & Second-Order Circuit Transients

14 Chapter 14: Electrical Professional — Electronics, Industrial Electronics & Communications

14.1 Electronics 1 & 2 — Semiconductor Devices & Analog Circuits 14.2 Electrical Apparatus & Devices — Industrial Electronics & Power Converters 14.3 Fundamentals of Electronic Communications

15 Chapter 15: Electrical Professional — Transformers & DC Machines

15.1 Single-Phase & Three-Phase Transformers 15.2 Transformer Connections & Special Transformers 15.3 DC Generators & DC Motors

16 Chapter 16: Electrical Professional — AC Synchronous & Induction Machinery

16.1 Synchronous Generators (Alternators) 16.2 Synchronous Motors & Special AC Machines 16.3 Three-Phase & Single-Phase Induction Motors

17 Chapter 17: Electrical Professional — Power Plants & Energy Conversion

17.1 Hydroelectric, Thermal & Combined Cycle Power Plants 17.2 Renewable Energy Systems & Geothermal Power Plants 17.3 Power Plant Economics, Load Curves & Energy Conversion

18 Chapter 18: Electrical Professional — Transmission & Distribution

18.1 Transmission Line Parameters & Performance Models 18.2 Mechanical Overhead Line Design, Underground Cables & Insulators 18.3 Distribution Systems, Substation Layouts & Power Flow Control

19 Chapter 19: Electrical Professional — Power System Analysis

19.1 The Per-Unit System, Base Conversion & Impedance Diagrams 19.2 Symmetrical Components & Unbalanced Fault Analysis 19.3 Load Flow, Economic Dispatch & Power System Stability

20 Chapter 20: Electrical Professional — Protection, Control, Instrumentation & Illumination

20.1 Power System Protection & Protective Relaying 20.2 Industrial Motor Control, Logic Circuits & PLC Automation 20.3 Electrical Instrumentation, Transducers & Measurement Systems 20.4 Illumination Engineering, Lighting Design & Photometrics 20.5 Feedback Control Systems & Research Methods

3.1 Differential Calculus, Limits, Derivatives & Applications

Key Takeaways Explain This Topic AI

Indeterminate limit forms (0/0 and ∞ / ∞ \infty/\infty ∞/∞ ) are evaluated using L'Hôpital's Rule: lim ⁡ x → c f ( x ) g ( x ) = lim ⁡ x → c f ′ ( x ) g ′ ( x ) \lim_{x \to c} \frac{f(x)}{g(x)} = \lim_{x \to c} \frac{f'(x)}{g'(x)} lim x → c ​ g ( x ) f ( x ) ​ = lim x → c ​ g ′ ( x ) f ′ ( x ) ​ , provided the limit of derivatives exists.

Core differentiation rules include the Product Rule ( u v ) ′ = u ′ v + u v ′ (uv)' = u'v + uv' ( uv ) ′ = u ′ v + u v ′ , Quotient Rule ( u v ) ′ = u ′ v − u v ′ v 2 \left(\frac{u}{v}\right)' = \frac{u'v - uv'}{v^2} ( v u ​ ) ′ = v 2 u ′ v − u v ′ ​ , and Chain Rule d y d x = d y d u ⋅ d u d x \frac{dy}{dx} = \frac{dy}{du} \cdot \frac{du}{dx} d x d y ​ = d u d y ​ ⋅ d x d u ​ .

Critical points occur where f ′ ( x ) = 0 f'(x) = 0 f ′ ( x ) = 0 or is undefined; the Second Derivative Test identifies local maxima ( f ′ ′ ( x ) < 0 f''(x) < 0 f ′′ ( x ) < 0 ) and local minima ( f ′ ′ ( x ) > 0 f''(x) > 0 f ′′ ( x ) > 0 ).

The radius of curvature of a planar curve y = f ( x ) y = f(x) y = f ( x ) is given by ρ = [ 1 + ( y ′ ) 2 ] 3 / 2 ∣ y ′ ′ ∣ \rho = \frac{[1 + (y')^2]^{3/2}}{|y''|} ρ = ∣ y ′′ ∣ [ 1 + ( y ′ ) 2 ] 3/2 ​ , representing the radius of the osculating circle at a given point.

Partial derivatives ∂ f ∂ x \frac{\partial f}{\partial x} ∂ x ∂ f ​ and ∂ f ∂ y \frac{\partial f}{\partial y} ∂ y ∂ f ​ measure rates of change with respect to single independent variables in multivariable electrical engineering systems.

Last updated: August 2026

3.1 Differential Calculus, Limits, Derivatives & Applications

Differential calculus is the branch of engineering mathematics concerned with instantaneous rates of change, slopes of curves, and optimization of physical systems. For electrical engineers preparing for the PRC Licensure Examination, mastery of differential calculus is foundational—it underpins signal analysis, circuit transient response, electromagnetic field theory, and power distribution optimization.

  • 1. Limits and Continuity
  • Mathematical Definition of a Limit

The limit of a function f ( x ) f(x) f ( x ) as x x x approaches a real number c c c is L L L , written as: lim ⁡ x → c f ( x ) = L \lim_{x \to c} f(x) = L x → c lim ​ f ( x ) = L

This signifies that f ( x ) f(x) f ( x ) can be made arbitrarily close to L L L by choosing x x x sufficiently close to c c c , but not equal to c c c .

Continuity Criteria

A function f ( x ) f(x) f ( x ) is continuous at a point x = c x = c x = c if and only if three conditions are satisfied simultaneously:

f ( c ) f(c) f ( c ) is defined (i.e., c c c is in the domain of f f f ).

lim ⁡ x → c f ( x ) \lim_{x \to c} f(x) lim x → c ​ f ( x ) exists (meaning the left-hand limit lim ⁡ x → c − f ( x ) \lim_{x \to c^-} f(x) lim x → c − ​ f ( x ) equals the right-hand limit lim ⁡ x → c + f ( x ) \lim_{x \to c^+} f(x) lim x → c + ​ f ( x ) ).

lim ⁡ x → c f ( x ) = f ( c ) \lim_{x \to c} f(x) = f(c) lim x → c ​ f ( x ) = f ( c ) .

If any of these conditions fail, the function exhibits a discontinuity (removable, jump, or infinite/essential).

Indeterminate Forms & L'Hôpital's Rule

When evaluating a limit lim ⁡ x → c f ( x ) g ( x ) \lim_{x \to c} \frac{f(x)}{g(x)} lim x → c ​ g ( x ) f ( x ) ​ results in an indeterminate quotient of the form [ 0 0 ] \left[\frac{0}{0}\right] [ 0 0 ​ ] or [ ∞ ∞ ] \left[\frac{\infty}{\infty}\right] [ ∞ ∞ ​ ] , L'Hôpital's Rule applies: lim ⁡ x → c f ( x ) g ( x ) = lim ⁡ x → c f ′ ( x ) g ′ ( x ) \lim_{x \to c} \frac{f(x)}{g(x)} = \lim_{x \to c} \frac{f'(x)}{g'(x)} x → c lim ​ g ( x ) f ( x ) ​ = x → c lim ​ g ′ ( x ) f ′ ( x ) ​

provided the limit on the right exists or is infinite.

For other indeterminate forms ( 0 ⋅ ∞ 0 \cdot \infty 0 ⋅ ∞ , ∞ − ∞ \infty - \infty ∞ − ∞ , 1 ∞ 1^\infty 1 ∞ , 0 0 0^0 0 0 , ∞ 0 \infty^0 ∞ 0 ), algebraic transformation into a quotient form is required prior to applying L'Hôpital's Rule.

2. Fundamental Differentiation Rules

The derivative of y = f ( x ) y = f(x) y = f ( x ) with respect to x x x is defined as the limit of the difference quotient: f ′ ( x ) = d y d x = lim ⁡ Δ x → 0 f ( x + Δ x ) − f ( x ) Δ x f'(x) = \frac{dy}{dx} = \lim_{\Delta x \to 0} \frac{f(x + \Delta x) - f(x)}{\Delta x} f ′ ( x ) = d x d y ​ = Δ x → 0 lim ​ Δ x f ( x + Δ x ) − f ( x ) ​

Core Operational Rules

  • Rule Name Formula
  • Constant Rule d d x ( c ) = 0 \frac{d}{dx}(c) = 0 d x d ​ ( c ) = 0
  • Power Rule d d x ( x n ) = n x n − 1 \frac{d}{dx}(x^n) = n x^{n-1} d x d ​ ( x n ) = n x n − 1

Constant Multiple d d x [ c ⋅ u ( x ) ] = c ⋅ u ′ ( x ) \frac{d}{dx}[c \cdot u(x)] = c \cdot u'(x) d x d ​ [ c ⋅ u ( x )] = c ⋅ u ′ ( x )

Sum / Difference d d x [ u ( x ) ± v ( x ) ] = u ′ ( x ) ± v ′ ( x ) \frac{d}{dx}[u(x) \pm v(x)] = u'(x) \pm v'(x) d x d ​ [ u ( x ) ± v ( x )] = u ′ ( x ) ± v ′ ( x )

Product Rule d d x [ u ⋅ v ] = u ′ v + u v ′ \frac{d}{dx}[u \cdot v] = u'v + uv' d x d ​ [ u ⋅ v ] = u ′ v + u v ′

Quotient Rule d d x [ u v ] = u ′ v − u v ′ v 2 \frac{d}{dx}\left[\frac{u}{v}\right] = \frac{u'v - uv'}{v^2} d x d ​ [ v u ​ ] = v 2 u ′ v − u v ′ ​

Chain Rule d d x [ f ( g ( x ) ) ] = f ′ ( g ( x ) ) ⋅ g ′ ( x ) = d y d u ⋅ d u d x \frac{d}{dx}[f(g(x))] = f'(g(x)) \cdot g'(x) = \frac{dy}{du} \cdot \frac{du}{dx} d x d ​ [ f ( g ( x ))] = f ′ ( g ( x )) ⋅ g ′ ( x ) = d u d y ​ ⋅ d x d u ​

Standard Derivatives Table

Function f ( x ) f(x) f ( x ) Derivative f ′ ( x ) f'(x) f ′ ( x ) Function f ( x ) f(x) f ( x ) Derivative f ′ ( x ) f'(x) f ′ ( x )

e k x e^{kx} e k x k e k x k e^{kx} k e k x ln ⁡ ( x ) \ln(x) ln ( x ) 1 x \frac{1}{x} x 1 ​

a x a^x a x a x ln ⁡ ( a ) a^x \ln(a) a x ln ( a ) log ⁡ a ( x ) \log_a(x) lo g a ​ ( x ) 1 x ln ⁡ ( a ) \frac{1}{x \ln(a)} x l n ( a ) 1 ​

sin ⁡ ( k x ) \sin(kx) sin ( k x ) k cos ⁡ ( k x ) k \cos(kx) k cos ( k x ) cos ⁡ ( k x ) \cos(kx) cos ( k x ) − k sin ⁡ ( k x ) -k \sin(kx) − k sin ( k x )

tan ⁡ ( x ) \tan(x) tan ( x ) sec ⁡ 2 ( x ) \sec^2(x) sec 2 ( x ) cot ⁡ ( x ) \cot(x) cot ( x ) − csc ⁡ 2 ( x ) -\csc^2(x) − csc 2 ( x )

sec ⁡ ( x ) \sec(x) sec ( x ) sec ⁡ ( x ) tan ⁡ ( x ) \sec(x)\tan(x) sec ( x ) tan ( x ) csc ⁡ ( x ) \csc(x) csc ( x ) − csc ⁡ ( x ) cot ⁡ ( x ) -\csc(x)\cot(x) − csc ( x ) cot ( x )

arcsin ⁡ ( x ) \arcsin(x) arcsin ( x ) 1 1 − x 2 \frac{1}{\sqrt{1 - x^2}} 1 − x 2 ​ 1 ​ arctan ⁡ ( x ) \arctan(x) arctan ( x ) 1 1 + x 2 \frac{1}{1 + x^2} 1 + x 2 1 ​

3. Implicit Differentiation

When a relation between x x x and y y y is expressed implicitly as F ( x , y ) = 0 F(x, y) = 0 F ( x , y ) = 0 rather than explicitly as y = f ( x ) y = f(x) y = f ( x ) , we differentiate both sides of the equation with respect to x x x , applying the chain rule to terms containing y y y (treating y y y as an implicit function of x x x ), and then solve algebraically for d y d x \frac{dy}{dx} d x d y ​ .

Alternatively, using partial derivatives: d y d x = − ∂ F ∂ x ∂ F ∂ y = − F x F y \frac{dy}{dx} = -\frac{\frac{\partial F}{\partial x}}{\frac{\partial F}{\partial y}} = -\frac{F_x}{F_y} d x d y ​ = − ∂ y ∂ F ​ ∂ x ∂ F ​ ​ = − F y ​ F x ​ ​

  • 4. Maxima, Minima & Optimization Problems
  • Critical Points and Extremities

A critical point of f ( x ) f(x) f ( x ) occurs where f ′ ( x ) = 0 f'(x) = 0 f ′ ( x ) = 0 or where f ′ ( x ) f'(x) f ′ ( x ) is undefined.

First Derivative Test : If f ′ ( x ) f'(x) f ′ ( x ) changes sign from positive to negative at x 0 x_0 x 0 ​ , f ( x 0 ) f(x_0) f ( x 0 ​ ) is a local maximum. If f ′ ( x ) f'(x) f ′ ( x ) changes from negative to positive, f ( x 0 ) f(x_0) f ( x 0 ​ ) is a local minimum.

Second Derivative Test : If f ′ ( x 0 ) = 0 f'(x_0) = 0 f ′ ( x 0 ​ ) = 0 :

If f ′ ′ ( x 0 ) < 0 f''(x_0) < 0 f ′′ ( x 0 ​ ) < 0 , f ( x ) f(x) f ( x ) has a local maximum at x 0 x_0 x 0 ​ (concave down).

If f ′ ′ ( x 0 ) > 0 f''(x_0) > 0 f ′′ ( x 0 ​ ) > 0 , f ( x ) f(x) f ( x ) has a local minimum at x 0 x_0 x 0 ​ (concave up).

If f ′ ′ ( x 0 ) = 0 f''(x_0) = 0 f ′′ ( x 0 ​ ) = 0 , the test is inconclusive.

An inflection point occurs where concavity changes, requiring f ′ ′ ( x ) = 0 f''(x) = 0 f ′′ ( x ) = 0 (or undefined) with a sign change in f ′ ′ ( x ) f''(x) f ′′ ( x ) .

  • 5. Related Rates & Curvature
  • Related Rates

In related rates problems, physical quantities are functions of time t t t . Differentiating governing geometric or physical equations implicitly with respect to t t t establishes relationships between rates of change (e.g., d V d t , d I d t , d x d t \frac{dV}{dt}, \frac{dI}{dt}, \frac{dx}{dt} d t d V ​ , d t d I ​ , d t d x ​ ).

Curvature & Radius of Curvature

Curvature ( κ \kappa κ ) measures how sharply a curve bends per unit arc length. For a curve y = f ( x ) y = f(x) y = f ( x ) : κ = ∣ y ′ ′ ∣ [ 1 + ( y ′ ) 2 ] 3 / 2 \kappa = \frac{|y''|}{[1 + (y')^2]^{3/2}} κ = [ 1 + ( y ′ ) 2 ] 3/2 ∣ y ′′ ∣ ​

The radius of curvature ( ρ \rho ρ ) is the reciprocal of curvature: ρ = 1 κ = [ 1 + ( y ′ ) 2 ] 3 / 2 ∣ y ′ ′ ∣ \rho = \frac{1}{\kappa} = \frac{[1 + (y')^2]^{3/2}}{|y''|} ρ = κ 1 ​ = ∣ y ′′ ∣ [ 1 + ( y ′ ) 2 ] 3/2 ​

For parametric equations x = x ( t ) x = x(t) x = x ( t ) and y = y ( t ) y = y(t) y = y ( t ) : κ = ∣ x ˙ y ¨ − y ˙ x ¨ ∣ [ x ˙ 2 + y ˙ 2 ] 3 / 2 \kappa = \frac{|\dot{x}\ddot{y} - \dot{y}\ddot{x}|}{[\dot{x}^2 + \dot{y}^2]^{3/2}} κ = [ x ˙ 2 + y ˙ ​ 2 ] 3/2 ∣ x ˙ y ¨ ​ − y ˙ ​ x ¨ ∣ ​

6. Partial Derivatives

For a function of multiple variables z = f ( x , y ) z = f(x, y) z = f ( x , y ) :

The partial derivative with respect to x x x ( ∂ f ∂ x \frac{\partial f}{\partial x} ∂ x ∂ f ​ or f x f_x f x ​ ) is calculated by differentiating f ( x , y ) f(x,y) f ( x , y ) with respect to x x x while holding y y y constant.

The partial derivative with respect to y y y ( ∂ f ∂ y \frac{\partial f}{\partial y} ∂ y ∂ f ​ or f y f_y f y ​ ) treats x x x as constant.

Clairaut's Theorem (Mixed Partials)

If f ( x , y ) f(x,y) f ( x , y ) and its partial derivatives are continuous, mixed second-order partials are equal: ∂ 2 f ∂ x ∂ y = ∂ 2 f ∂ y ∂ x \frac{\partial^2 f}{\partial x \partial y} = \frac{\partial^2 f}{\partial y \partial x} ∂ x ∂ y ∂ 2 f ​ = ∂ y ∂ x ∂ 2 f ​

Total Differential & Error Propagation d f = ∂ f ∂ x d x + ∂ f ∂ y d y df = \frac{\partial f}{\partial x} dx + \frac{\partial f}{\partial y} dy df = ∂ x ∂ f ​ d x + ∂ y ∂ f ​ d y

For electrical power P = V ⋅ I P = V \cdot I P = V ⋅ I or P = I 2 R P = I^2 R P = I 2 R , total differentials estimate measurement error propagation: d P P = d V V + d I I \frac{dP}{P} = \frac{dV}{V} + \frac{dI}{I} P d P ​ = V d V ​ + I d I ​ .

  • Step-by-Step Worked Numerical Examples
  • Example 3.1.1: Indeterminate Limit via L'Hôpital's Rule

Problem: Evaluate the limit lim ⁡ x → 0 e 2 x − 1 − 2 x x 2 \lim_{x \to 0} \frac{e^{2x} - 1 - 2x}{x^2} lim x → 0 ​ x 2 e 2 x − 1 − 2 x ​ .

Solution:

Evaluate direct substitution: At x = 0 x = 0 x = 0 , e 0 − 1 − 0 0 2 = 1 − 1 − 0 0 = 0 0 \frac{e^0 - 1 - 0}{0^2} = \frac{1 - 1 - 0}{0} = \frac{0}{0} 0 2 e 0 − 1 − 0 ​ = 0 1 − 1 − 0 ​ = 0 0 ​ (indeterminate form).

Apply L'Hôpital's Rule (1st differentiation): lim ⁡ x → 0 d d x ( e 2 x − 1 − 2 x ) d d x ( x 2 ) = lim ⁡ x → 0 2 e 2 x − 2 2 x \lim_{x \to 0} \frac{\frac{d}{dx}(e^{2x} - 1 - 2x)}{\frac{d}{dx}(x^2)} = \lim_{x \to 0} \frac{2e^{2x} - 2}{2x} x → 0 lim ​ d x d ​ ( x 2 ) d x d ​ ( e 2 x − 1 − 2 x ) ​ = x → 0 lim ​ 2 x 2 e 2 x − 2 ​

Re-evaluate substitution: At x = 0 x = 0 x = 0 , 2 ( 1 ) − 2 0 = 0 0 \frac{2(1) - 2}{0} = \frac{0}{0} 0 2 ( 1 ) − 2 ​ = 0 0 ​ (still indeterminate).

Apply L'Hôpital's Rule (2nd differentiation): lim ⁡ x → 0 d d x ( 2 e 2 x − 2 ) d d x ( 2 x ) = lim ⁡ x → 0 4 e 2 x 2 \lim_{x \to 0} \frac{\frac{d}{dx}(2e^{2x} - 2)}{\frac{d}{dx}(2x)} = \lim_{x \to 0} \frac{4e^{2x}}{2} x → 0 lim ​ d x d ​ ( 2 x ) d x d ​ ( 2 e 2 x − 2 ) ​ = x → 0 lim ​ 2 4 e 2 x ​

Evaluate final limit: 4 e 2 ( 0 ) 2 = 4 ( 1 ) 2 = 2 \frac{4 e^{2(0)}}{2} = \frac{4(1)}{2} = 2 2 4 e 2 ( 0 ) ​ = 2 4 ( 1 ) ​ = 2

Example 3.1.2: Electrical Conductor Insulation Optimization

Problem: An insulated high-voltage cylindrical power cable has an inner conductor radius r r r and outer insulation radius R 0 = 10 mm R_0 = 10\text{ mm} R 0 ​ = 10 mm (fixed). The breakdown voltage capability of the cable insulation is given by V ( r ) = E crit ⋅ r ln ⁡ ( R 0 r ) V(r) = E_{\text{crit}} \cdot r \ln\left(\frac{R_0}{r}\right) V ( r ) = E crit ​ ⋅ r ln ( r R 0 ​ ​ ) , where E crit E_{\text{crit}} E crit ​ is a dielectric constant. Find the conductor radius r r r that maximizes the breakdown voltage.

Solution:

Express breakdown voltage function: V ( r ) = E crit ⋅ r [ ln ⁡ ( 10 ) − ln ⁡ ( r ) ] V(r) = E_{\text{crit}} \cdot r [\ln(10) - \ln(r)] V ( r ) = E crit ​ ⋅ r [ ln ( 10 ) − ln ( r )]

Take the first derivative with respect to r r r : d V d r = E crit [ 1 ⋅ ( ln ⁡ ( 10 ) − ln ⁡ ( r ) ) + r ⋅ ( − 1 r ) ] \frac{dV}{dr} = E_{\text{crit}} \left[ 1 \cdot (\ln(10) - \ln(r)) + r \cdot \left(-\frac{1}{r}\right) \right] d r d V ​ = E crit ​ [ 1 ⋅ ( ln ( 10 ) − ln ( r )) + r ⋅ ( − r 1 ​ ) ] d V d r = E crit [ ln ⁡ ( 10 ) − ln ⁡ ( r ) − 1 ] = E crit [ ln ⁡ ( 10 r ) − 1 ] \frac{dV}{dr} = E_{\text{crit}} [\ln(10) - \ln(r) - 1] = E_{\text{crit}} \left[ \ln\left(\frac{10}{r}\right) - 1 \right] d r d V ​ = E crit ​ [ ln ( 10 ) − ln ( r ) − 1 ] = E crit ​ [ ln ( r 10 ​ ) − 1 ]

Set derivative to zero to find critical points: E crit [ ln ⁡ ( 10 r ) − 1 ] = 0 ⟹ ln ⁡ ( 10 r ) = 1 E_{\text{crit}} \left[ \ln\left(\frac{10}{r}\right) - 1 \right] = 0 \implies \ln\left(\frac{10}{r}\right) = 1 E crit ​ [ ln ( r 10 ​ ) − 1 ] = 0 ⟹ ln ( r 10 ​ ) = 1 10 r = e 1 = e ⟹ r = 10 e \frac{10}{r} = e^1 = e \implies r = \frac{10}{e} r 10 ​ = e 1 = e ⟹ r = e 10 ​

Calculate numerical value: r = 10 2.71828 ≈ 3.6788 mm r = \frac{10}{2.71828} \approx 3.6788\text{ mm} r = 2.71828 10 ​ ≈ 3.6788 mm

Verify maximum via second derivative: d 2 V d r 2 = E crit ⋅ ( − 1 r ) < 0 \frac{d^2V}{dr^2} = E_{\text{crit}} \cdot \left(-\frac{1}{r}\right) < 0 d r 2 d 2 V ​ = E crit ​ ⋅ ( − r 1 ​ ) < 0 Since the second derivative is negative for all r > 0 r > 0 r > 0 , r = 3.68 mm r = 3.68\text{ mm} r = 3.68 mm maximizes breakdown voltage capability.

Example 3.1.3: Calculation of Radius of Curvature

Problem: Calculate the radius of curvature ρ \rho ρ for the curve y = 1 3 x 3 y = \frac{1}{3} x^3 y = 3 1 ​ x 3 at the point P ( 1 , 1 3 ) P\left(1, \frac{1}{3}\right) P ( 1 , 3 1 ​ ) .

Solution:

Find the first derivative y ′ y' y ′ : y ′ = d d x ( 1 3 x 3 ) = x 2 y' = \frac{d}{dx}\left(\frac{1}{3}x^3\right) = x^2 y ′ = d x d ​ ( 3 1 ​ x 3 ) = x 2 At x = 1 x = 1 x = 1 , y ′ ( 1 ) = 1 2 = 1 y'(1) = 1^2 = 1 y ′ ( 1 ) = 1 2 = 1 .

Find the second derivative y ′ ′ y'' y ′′ : y ′ ′ = d d x ( x 2 ) = 2 x y'' = \frac{d}{dx}(x^2) = 2x y ′′ = d x d ​ ( x 2 ) = 2 x At x = 1 x = 1 x = 1 , y ′ ′ ( 1 ) = 2 ( 1 ) = 2 y''(1) = 2(1) = 2 y ′′ ( 1 ) = 2 ( 1 ) = 2 .

Apply the radius of curvature formula: ρ = [ 1 + ( y ′ ) 2 ] 3 / 2 ∣ y ′ ′ ∣ = [ 1 + ( 1 ) 2 ] 3 / 2 ∣ 2 ∣ = ( 2 ) 3 / 2 2 = 2 2 2 = 2 \rho = \frac{[1 + (y')^2]^{3/2}}{|y''|} = \frac{[1 + (1)^2]^{3/2}}{|2|} = \frac{(2)^{3/2}}{2} = \frac{2\sqrt{2}}{2} = \sqrt{2} ρ = ∣ y ′′ ∣ [ 1 + ( y ′ ) 2 ] 3/2 ​ = ∣2∣ [ 1 + ( 1 ) 2 ] 3/2 ​ = 2 ( 2 ) 3/2 ​ = 2 2 2 ​ ​ = 2 ​

Numerical evaluation: ρ = 2 ≈ 1.4142 units \rho = \sqrt{2} \approx 1.4142\text{ units} ρ = 2 ​ ≈ 1.4142 units

Loading diagram... Differential Calculus Map & Solution Workflow