Study guide

3.2 Integral Calculus, Integration Techniques & Area/Volume Applications

PRC Registered Electrical Engineer REE

Track your progress as you read

Finished sections get a check mark.

1 Chapter 1: Overview, RA 7920 & Electrical Engineering Ethics

1.1 PRC Board of Electrical Engineering & REE Examination Overview 1.2 Republic Act No. 7920 (New Electrical Engineering Law) & License Classes 1.3 Code of Ethics & Professional Practice for Electrical Engineers

2 Chapter 2: Math — Algebra, Trig & Geometry

2.1 Algebraic Equations, Polynomials & Complex Numbers 2.2 Trigonometry — Identities, Triangles & Spherical Trig 2.3 Analytic & Solid Geometry

3 Chapter 3: Engineering Mathematics — Calculus & Differential Equations

3.1 Differential Calculus, Limits, Derivatives & Applications 3.2 Integral Calculus, Integration Techniques & Area/Volume Applications 3.3 Ordinary Differential Equations & Initial-Value Problems

4 Chapter 4: Engineering Mathematics — Advanced Math & Transform Methods

4.1 Laplace Transforms, Inverse Transforms & Circuit Applications 4.2 Fourier Series, Fourier Transforms & Frequency-Domain Analysis 4.3 Vector Analysis, Linear Algebra, Matrices & Complex Analysis

5 Chapter 5: Engineering Mathematics — Probability, Statistics & Engineering Data Analysis

5.1 Probability Theory, Counting Techniques & Bayes' Theorem 5.2 Engineering Data Analysis I — Descriptive Statistics & Probability Distributions 5.3 Engineering Data Analysis II — Confidence Intervals, Hypothesis Testing & Regression

6 Chapter 6: Engineering Mathematics — Numerical Methods & Analysis

6.1 Numerical Root-Finding & Solution of Linear Systems 6.2 Interpolation, Numerical Integration & Numerical Solution of ODEs

7 Chapter 7: ESAS — Physics, Chemistry & Computer Fundamentals

7.1 Physics for Engineers 7.2 General Chemistry & Materials Science 7.3 Computer Fundamentals, Programming & Data Logic 7.4 Logic Circuits, Switching Theory & Microprocessor Systems

8 Chapter 8: ESAS — Mechanics & Thermal-Fluid Engineering

8.1 Engineering Mechanics — Statics & Dynamics 8.2 Strength of Materials & Mechanics of Deformable Bodies 8.3 Thermal-Fluid Engineering — Thermodynamics & Fluid Mechanics

9 Chapter 9: ESAS — Engineering Economics, Management & Contracts

9.1 Engineering Economics & Depreciation 9.2 Engineering Management & Ethics 9.3 Philippine Electrical Engineering Law, Code & Contracts 9.4 Technopreneurship 101 & Management of Engineering Projects

10 Chapter 10: PEC 1 — Safety, Sizing & Protection

10.1 PEC Fundamentals, Safety Standards & Grounding/Bonding 10.2 Conductor Sizing, Ampacity Adjustment & Voltage Drop 10.3 Overcurrent Protection, Branch Circuit & Feeder Sizing 10.4 Basic Occupational Safety & Health (BOSH) and Electrical Safety Standards

11 Chapter 11: PEC 1 & 2 — Equipment & Utility Systems

11.1 PEC Equipment Installation & Wiring Methods 11.2 Utility Systems, Transformers & Switchgear 11.3 Special Occupancies & Hazardous Locations

12 Chapter 12: Electrical Professional — DC & AC Circuit Fundamentals

12.1 DC Circuit Analysis & Network Theorems 12.2 Single-Phase AC Circuits & Phasor Analysis 12.3 Balanced & Unbalanced Three-Phase AC Circuits

13 Chapter 13: Electrical Professional — EM Fields & Transients

13.1 Electrostatics, Magnetostatics & Maxwell's Equations 13.2 Electromagnetic Waves & Transmission Line Fields 13.3 First-Order & Second-Order Circuit Transients

14 Chapter 14: Electrical Professional — Electronics, Industrial Electronics & Communications

14.1 Electronics 1 & 2 — Semiconductor Devices & Analog Circuits 14.2 Electrical Apparatus & Devices — Industrial Electronics & Power Converters 14.3 Fundamentals of Electronic Communications

15 Chapter 15: Electrical Professional — Transformers & DC Machines

15.1 Single-Phase & Three-Phase Transformers 15.2 Transformer Connections & Special Transformers 15.3 DC Generators & DC Motors

16 Chapter 16: Electrical Professional — AC Synchronous & Induction Machinery

16.1 Synchronous Generators (Alternators) 16.2 Synchronous Motors & Special AC Machines 16.3 Three-Phase & Single-Phase Induction Motors

17 Chapter 17: Electrical Professional — Power Plants & Energy Conversion

17.1 Hydroelectric, Thermal & Combined Cycle Power Plants 17.2 Renewable Energy Systems & Geothermal Power Plants 17.3 Power Plant Economics, Load Curves & Energy Conversion

18 Chapter 18: Electrical Professional — Transmission & Distribution

18.1 Transmission Line Parameters & Performance Models 18.2 Mechanical Overhead Line Design, Underground Cables & Insulators 18.3 Distribution Systems, Substation Layouts & Power Flow Control

19 Chapter 19: Electrical Professional — Power System Analysis

19.1 The Per-Unit System, Base Conversion & Impedance Diagrams 19.2 Symmetrical Components & Unbalanced Fault Analysis 19.3 Load Flow, Economic Dispatch & Power System Stability

20 Chapter 20: Electrical Professional — Protection, Control, Instrumentation & Illumination

20.1 Power System Protection & Protective Relaying 20.2 Industrial Motor Control, Logic Circuits & PLC Automation 20.3 Electrical Instrumentation, Transducers & Measurement Systems 20.4 Illumination Engineering, Lighting Design & Photometrics 20.5 Feedback Control Systems & Research Methods

3.2 Integral Calculus, Integration Techniques & Area/Volume Applications

Key Takeaways Explain This Topic AI

Integration represents continuous summation; the Fundamental Theorem of Calculus connects derivatives and integrals via ∫ a b f ( x ) d x = F ( b ) − F ( a ) \int_a^b f(x) \, dx = F(b) - F(a) ∫ a b ​ f ( x ) d x = F ( b ) − F ( a ) .

Advanced integration methods include Integration by Parts ( ∫ u d v = u v − ∫ v d u \int u \, dv = uv - \int v \, du ∫ u d v = uv − ∫ v d u ), Trigonometric Substitution for radicals, and Partial Fractions for rational functions.

Volumes of solids of revolution are computed via the Disk Method ( V = π ∫ r 2 d x V = \pi \int r^2 \, dx V = π ∫ r 2 d x ), Washer Method ( V = π ∫ ( R 2 − r 2 ) d x V = \pi \int (R^2 - r^2) \, dx V = π ∫ ( R 2 − r 2 ) d x ), or Cylindrical Shell Method ( V = 2 π ∫ x y d x V = 2\pi \int x y \, dx V = 2 π ∫ x y d x ).

The centroid ( x ˉ , y ˉ ) (\bar{x}, \bar{y}) ( x ˉ , y ˉ ​ ) of a planar region marks its center of mass, where x ˉ = 1 A ∫ x d A \bar{x} = \frac{1}{A} \int x \, dA x ˉ = A 1 ​ ∫ x d A and y ˉ = 1 A ∫ y d A \bar{y} = \frac{1}{A} \int y \, dA y ˉ ​ = A 1 ​ ∫ y d A .

The Second Moment of Area (Moment of Inertia) I x = ∫ y 2 d A I_x = \int y^2 \, dA I x ​ = ∫ y 2 d A and I y = ∫ x 2 d A I_y = \int x^2 \, dA I y ​ = ∫ x 2 d A quantifies cross-sectional mechanical resistance to bending and rotation.

Last updated: August 2026

3.2 Integral Calculus, Integration Techniques & Area/Volume Applications

Integral calculus is the mathematics of accumulation, summation, and area. In electrical engineering, integration is used continuously—from computing electrical energy (integrating power over time) and average/RMS voltage values to evaluating electrostatic charge distributions, centroids, moments of inertia, and magnetic fluxes.

  • 1. Fundamental Principles of Integration
  • Indefinite Integral

The indefinite integral of a function f ( x ) f(x) f ( x ) represents the general antiderivative F ( x ) F(x) F ( x ) plus an arbitrary constant of integration C C C : ∫ f ( x ) d x = F ( x ) + C where F ′ ( x ) = f ( x ) \int f(x) \, dx = F(x) + C \quad \text{where } F'(x) = f(x) ∫ f ( x ) d x = F ( x ) + C where F ′ ( x ) = f ( x )

Definite Integral & Fundamental Theorem of Calculus

FTC Part 1: If F ( x ) = ∫ a x f ( t ) d t F(x) = \int_a^x f(t) \, dt F ( x ) = ∫ a x ​ f ( t ) d t , then F ′ ( x ) = f ( x ) F'(x) = f(x) F ′ ( x ) = f ( x ) .

FTC Part 2: If f ( x ) f(x) f ( x ) is continuous on [ a , b ] [a, b] [ a , b ] and F ′ ( x ) = f ( x ) F'(x) = f(x) F ′ ( x ) = f ( x ) , then: ∫ a b f ( x ) d x = F ( b ) − F ( a ) = [ F ( x ) ] a b \int_a^b f(x) \, dx = F(b) - F(a) = \Big[ F(x) \Big]_a^b ∫ a b ​ f ( x ) d x = F ( b ) − F ( a ) = [ F ( x ) ] a b ​

  • 2. Advanced Integration Techniques
  • 1. Integration by Parts

Derived from the product rule of differentiation: ∫ u d v = u v − ∫ v d u \int u \, dv = u v - \int v \, du ∫ u d v = uv − ∫ v d u

Strategy (LIATE rule for choosing u u u ): Logarithmic, Inverse trig, Algebraic, Trigonometric, Exponential.

2. Trigonometric Substitution

Used to evaluate integrals containing algebraic radical expressions:

Radical Expression Substitution Identity Used Differential

a 2 − x 2 \sqrt{a^2 - x^2} a 2 − x 2 ​ x = a sin ⁡ θ x = a \sin\theta x = a sin θ 1 − sin ⁡ 2 θ = cos ⁡ 2 θ 1 - \sin^2\theta = \cos^2\theta 1 − sin 2 θ = cos 2 θ d x = a cos ⁡ θ d θ dx = a \cos\theta \, d\theta d x = a cos θ d θ

a 2 + x 2 \sqrt{a^2 + x^2} a 2 + x 2 ​ x = a tan ⁡ θ x = a \tan\theta x = a tan θ 1 + tan ⁡ 2 θ = sec ⁡ 2 θ 1 + \tan^2\theta = \sec^2\theta 1 + tan 2 θ = sec 2 θ d x = a sec ⁡ 2 θ d θ dx = a \sec^2\theta \, d\theta d x = a sec 2 θ d θ

x 2 − a 2 \sqrt{x^2 - a^2} x 2 − a 2 ​ x = a sec ⁡ θ x = a \sec\theta x = a sec θ sec ⁡ 2 θ − 1 = tan ⁡ 2 θ \sec^2\theta - 1 = \tan^2\theta sec 2 θ − 1 = tan 2 θ d x = a sec ⁡ θ tan ⁡ θ d θ dx = a \sec\theta \tan\theta \, d\theta d x = a sec θ tan θ d θ

3. Partial Fractions Decomposition

Used to integrate rational functions P ( x ) Q ( x ) \frac{P(x)}{Q(x)} Q ( x ) P ( x ) ​ where degree of P ( x ) P(x) P ( x ) < degree of Q ( x ) Q(x) Q ( x ) :

Distinct Linear Factors: 1 ( x − a ) ( x − b ) = A x − a + B x − b \frac{1}{(x-a)(x-b)} = \frac{A}{x-a} + \frac{B}{x-b} ( x − a ) ( x − b ) 1 ​ = x − a A ​ + x − b B ​

Repeated Linear Factors: 1 ( x − a ) 2 = A x − a + B ( x − a ) 2 \frac{1}{(x-a)^2} = \frac{A}{x-a} + \frac{B}{(x-a)^2} ( x − a ) 2 1 ​ = x − a A ​ + ( x − a ) 2 B ​

Irreducible Quadratic Factors: 1 ( x − a ) ( x 2 + b x + c ) = A x − a + B x + C x 2 + b x + c \frac{1}{(x-a)(x^2+bx+c)} = \frac{A}{x-a} + \frac{Bx+C}{x^2+bx+c} ( x − a ) ( x 2 + b x + c ) 1 ​ = x − a A ​ + x 2 + b x + c B x + C ​

  • 3. Geometric and Physical Applications
  • Area Under and Between Curves

The plane area bounded by upper curve y 1 = f ( x ) y_1 = f(x) y 1 ​ = f ( x ) and lower curve y 2 = g ( x ) y_2 = g(x) y 2 ​ = g ( x ) from x = a x = a x = a to x = b x = b x = b : A = ∫ a b [ f ( x ) − g ( x ) ] d x A = \int_a^b [f(x) - g(x)] \, dx A = ∫ a b ​ [ f ( x ) − g ( x )] d x

Volumes of Solids of Revolution

When a planar region is revolved around an axis of rotation:

Disk Method (Solid, perpendicular strips): V = π ∫ a b [ r ( x ) ] 2 d x V = \pi \int_a^b [r(x)]^2 \, dx V = π ∫ a b ​ [ r ( x ) ] 2 d x

Washer Method (Hollow solid, outer radius R ( x ) R(x) R ( x ) , inner radius r ( x ) r(x) r ( x ) ): V = π ∫ a b ( [ R ( x ) ] 2 − [ r ( x ) ] 2 ) d x V = \pi \int_a^b \left( [R(x)]^2 - [r(x)]^2 \right) \, dx V = π ∫ a b ​ ( [ R ( x ) ] 2 − [ r ( x ) ] 2 ) d x

Cylindrical Shell Method (Parallel strips, radius p ( x ) p(x) p ( x ) , height h ( x ) h(x) h ( x ) ): V = 2 π ∫ a b p ( x ) h ( x ) d x V = 2\pi \int_a^b p(x) h(x) \, dx V = 2 π ∫ a b ​ p ( x ) h ( x ) d x

Arc Length of a Curve

For a smooth curve y = f ( x ) y = f(x) y = f ( x ) from x = a x = a x = a to x = b x = b x = b : s = ∫ a b 1 + ( d y d x ) 2 d x s = \int_a^b \sqrt{1 + \left(\frac{dy}{dx}\right)^2} \, dx s = ∫ a b ​ 1 + ( d x d y ​ ) 2 ​ d x

Centroid of a Plane Area

The geometric center ( x ˉ , y ˉ ) (\bar{x}, \bar{y}) ( x ˉ , y ˉ ​ ) of a plane area A A A : x ˉ = M y A = ∫ x d A A = ∫ a b x [ y 1 ( x ) − y 2 ( x ) ] d x ∫ a b [ y 1 ( x ) − y 2 ( x ) ] d x \bar{x} = \frac{M_y}{A} = \frac{\int x \, dA}{A} = \frac{\int_a^b x [y_1(x) - y_2(x)] \, dx}{\int_a^b [y_1(x) - y_2(x)] \, dx} x ˉ = A M y ​ ​ = A ∫ x d A ​ = ∫ a b ​ [ y 1 ​ ( x ) − y 2 ​ ( x )] d x ∫ a b ​ x [ y 1 ​ ( x ) − y 2 ​ ( x )] d x ​ y ˉ = M x A = ∫ y d A A = 1 2 ∫ a b ( [ y 1 ( x ) ] 2 − [ y 2 ( x ) ] 2 ) d x A \bar{y} = \frac{M_x}{A} = \frac{\int y \, dA}{A} = \frac{\frac{1}{2} \int_a^b \left([y_1(x)]^2 - [y_2(x)]^2\right) \, dx}{A} y ˉ ​ = A M x ​ ​ = A ∫ y d A ​ = A 2 1 ​ ∫ a b ​ ( [ y 1 ​ ( x ) ] 2 − [ y 2 ​ ( x ) ] 2 ) d x ​

Second Moment of Area (Moment of Inertia)

Quantifies structural stiffness of cross-sections (e.g., busbars, structural steel supports):

About x-axis: I x = ∫ y 2 d A = 1 3 ∫ a b [ y 1 ( x ) 3 − y 2 ( x ) 3 ] d x I_x = \int y^2 \, dA = \frac{1}{3} \int_a^b [y_1(x)^3 - y_2(x)^3] \, dx I x ​ = ∫ y 2 d A = 3 1 ​ ∫ a b ​ [ y 1 ​ ( x ) 3 − y 2 ​ ( x ) 3 ] d x

About y-axis: I y = ∫ x 2 d A = ∫ a b x 2 [ y 1 ( x ) − y 2 ( x ) ] d x I_y = \int x^2 \, dA = \int_a^b x^2 [y_1(x) - y_2(x)] \, dx I y ​ = ∫ x 2 d A = ∫ a b ​ x 2 [ y 1 ​ ( x ) − y 2 ​ ( x )] d x

Polar Moment of Inertia: J 0 = I x + I y = ∫ r 2 d A J_0 = I_x + I_y = \int r^2 \, dA J 0 ​ = I x ​ + I y ​ = ∫ r 2 d A

Radius of Gyration: k x = I x A , k y = I y A k_x = \sqrt{\frac{I_x}{A}}, \quad k_y = \sqrt{\frac{I_y}{A}} k x ​ = A I x ​ ​ ​ , k y ​ = A I y ​ ​ ​

Improper Integrals

Type I (Infinite limits): ∫ a ∞ f ( x ) d x = lim ⁡ t → ∞ ∫ a t f ( x ) d x \int_a^\infty f(x) \, dx = \lim_{t \to \infty} \int_a^t f(x) \, dx ∫ a ∞ ​ f ( x ) d x = lim t → ∞ ​ ∫ a t ​ f ( x ) d x

Type II (Unbounded integrand): ∫ a b f ( x ) d x = lim ⁡ t → b − ∫ a t f ( x ) d x \int_a^b f(x) \, dx = \lim_{t \to b^-} \int_a^t f(x) \, dx ∫ a b ​ f ( x ) d x = lim t → b − ​ ∫ a t ​ f ( x ) d x (if vertical asymptote at x = b x = b x = b ).

If the limit exists as a finite real number, the improper integral converges ; otherwise, it diverges .

  • Step-by-Step Worked Numerical Examples
  • Example 3.2.1: Energy Dissipated in a Resistor via Integration by Parts

Problem: A transient surge current i ( t ) = 10 t e − 2 t A i(t) = 10 t e^{-2t}\text{ A} i ( t ) = 10 t e − 2 t A flows through a R = 5 Ω R = 5\ \Omega R = 5 Ω resistor for t ≥ 0 t \ge 0 t ≥ 0 . Calculate the total electrical energy E = ∫ 0 ∞ i ( t ) 2 R d t E = \int_0^\infty i(t)^2 R \, dt E = ∫ 0 ∞ ​ i ( t ) 2 R d t dissipated in the resistor.

Solution:

Formulate the power expression: p ( t ) = i ( t ) 2 R = ( 10 t e − 2 t ) 2 ⋅ 5 = 100 t 2 e − 4 t ⋅ 5 = 500 t 2 e − 4 t W p(t) = i(t)^2 R = (10 t e^{-2t})^2 \cdot 5 = 100 t^2 e^{-4t} \cdot 5 = 500 t^2 e^{-4t}\text{ W} p ( t ) = i ( t ) 2 R = ( 10 t e − 2 t ) 2 ⋅ 5 = 100 t 2 e − 4 t ⋅ 5 = 500 t 2 e − 4 t W

Set up the definite integral: E = 500 ∫ 0 ∞ t 2 e − 4 t d t E = 500 \int_0^\infty t^2 e^{-4t} \, dt E = 500 ∫ 0 ∞ ​ t 2 e − 4 t d t

Evaluate using Integration by Parts (Tabular Method):

Differentiate t 2 → 2 t → 2 → 0 t^2 \to 2t \to 2 \to 0 t 2 → 2 t → 2 → 0

Integrate e − 4 t → − 1 4 e − 4 t → 1 16 e − 4 t → − 1 64 e − 4 t e^{-4t} \to -\frac{1}{4} e^{-4t} \to \frac{1}{16} e^{-4t} \to -\frac{1}{64} e^{-4t} e − 4 t → − 4 1 ​ e − 4 t → 16 1 ​ e − 4 t → − 64 1 ​ e − 4 t ∫ t 2 e − 4 t d t = t 2 ( − 1 4 e − 4 t ) − 2 t ( 1 16 e − 4 t ) + 2 ( − 1 64 e − 4 t ) \int t^2 e^{-4t} \, dt = t^2\left(-\frac{1}{4} e^{-4t}\right) - 2t\left(\frac{1}{16} e^{-4t}\right) + 2\left(-\frac{1}{64} e^{-4t}\right) ∫ t 2 e − 4 t d t = t 2 ( − 4 1 ​ e − 4 t ) − 2 t ( 16 1 ​ e − 4 t ) + 2 ( − 64 1 ​ e − 4 t ) = − e − 4 t [ t 2 4 + t 8 + 1 32 ] = -e^{-4t} \left[ \frac{t^2}{4} + \frac{t}{8} + \frac{1}{32} \right] = − e − 4 t [ 4 t 2 ​ + 8 t ​ + 32 1 ​ ]

Apply upper and lower bounds: E = 500 lim ⁡ b → ∞ [ − e − 4 t ( t 2 4 + t 8 + 1 32 ) ] 0 b E = 500 \lim_{b \to \infty} \left[ -e^{-4t} \left( \frac{t^2}{4} + \frac{t}{8} + \frac{1}{32} \right) \right]_0^b E = 500 b → ∞ lim ​ [ − e − 4 t ( 4 t 2 ​ + 8 t ​ + 32 1 ​ ) ] 0 b ​ At b → ∞ b \to \infty b → ∞ , the upper limit evaluation approaches 0 0 0 .

At t = 0 t = 0 t = 0 : 500 ⋅ ( − e 0 ( 0 + 0 + 1 32 ) ) ⋅ ( − 1 ) = 500 ⋅ 1 32 = 500 32 = 15.625 Joules 500 \cdot \left( -e^0 \left( 0 + 0 + \frac{1}{32} \right) \right) \cdot (-1) = 500 \cdot \frac{1}{32} = \frac{500}{32} = 15.625\text{ Joules} 500 ⋅ ( − e 0 ( 0 + 0 + 32 1 ​ ) ) ⋅ ( − 1 ) = 500 ⋅ 32 1 ​ = 32 500 ​ = 15.625 Joules

Example 3.2.2: Centroid of a Parabolic Region

Problem: Find the centroid ( x ˉ , y ˉ ) (\bar{x}, \bar{y}) ( x ˉ , y ˉ ​ ) of the region bounded by y = 4 − x 2 y = 4 - x^2 y = 4 − x 2 and the x-axis ( y = 0 y = 0 y = 0 ).

Solution:

Determine bounds of integration: Set y = 0 ⟹ 4 − x 2 = 0 ⟹ x = − 2 y = 0 \implies 4 - x^2 = 0 \implies x = -2 y = 0 ⟹ 4 − x 2 = 0 ⟹ x = − 2 to x = 2 x = 2 x = 2 .

Calculate Total Area A A A : A = ∫ − 2 2 ( 4 − x 2 ) d x = [ 4 x − x 3 3 ] − 2 2 = ( 8 − 8 3 ) − ( − 8 + 8 3 ) = 16 3 + 16 3 = 32 3 ≈ 10.667 A = \int_{-2}^2 (4 - x^2) \, dx = \left[ 4x - \frac{x^3}{3} \right]_{-2}^2 = \left(8 - \frac{8}{3}\right) - \left(-8 + \frac{8}{3}\right) = \frac{16}{3} + \frac{16}{3} = \frac{32}{3} \approx 10.667 A = ∫ − 2 2 ​ ( 4 − x 2 ) d x = [ 4 x − 3 x 3 ​ ] − 2 2 ​ = ( 8 − 3 8 ​ ) − ( − 8 + 3 8 ​ ) = 3 16 ​ + 3 16 ​ = 3 32 ​ ≈ 10.667

Determine x ˉ \bar{x} x ˉ : By symmetry about the y-axis, x ˉ = 0 \bar{x} = 0 x ˉ = 0 .

Calculate First Moment about x-axis M x M_x M x ​ : M x = 1 2 ∫ − 2 2 [ f ( x ) ] 2 d x = 1 2 ∫ − 2 2 ( 4 − x 2 ) 2 d x = 1 2 ∫ − 2 2 ( 16 − 8 x 2 + x 4 ) d x M_x = \frac{1}{2} \int_{-2}^2 [f(x)]^2 \, dx = \frac{1}{2} \int_{-2}^2 (4 - x^2)^2 \, dx = \frac{1}{2} \int_{-2}^2 (16 - 8x^2 + x^4) \, dx M x ​ = 2 1 ​ ∫ − 2 2 ​ [ f ( x ) ] 2 d x = 2 1 ​ ∫ − 2 2 ​ ( 4 − x 2 ) 2 d x = 2 1 ​ ∫ − 2 2 ​ ( 16 − 8 x 2 + x 4 ) d x M x = 1 2 [ 16 x − 8 x 3 3 + x 5 5 ] − 2 2 M_x = \frac{1}{2} \left[ 16x - \frac{8x^3}{3} + \frac{x^5}{5} \right]_{-2}^2 M x ​ = 2 1 ​ [ 16 x − 3 8 x 3 ​ + 5 x 5 ​ ] − 2 2 ​ At x = 2 x = 2 x = 2 : 16 ( 2 ) − 8 ( 8 ) 3 + 32 5 = 32 − 21.333 + 6.4 = 17.0667 16(2) - \frac{8(8)}{3} + \frac{32}{5} = 32 - 21.333 + 6.4 = 17.0667 16 ( 2 ) − 3 8 ( 8 ) ​ + 5 32 ​ = 32 − 21.333 + 6.4 = 17.0667 .

Evaluating [ − 2 , 2 ] [-2, 2] [ − 2 , 2 ] double bounds: M x = 1 2 ⋅ 2 ⋅ ( 17.0667 ) = 256 15 ≈ 17.0667 M_x = \frac{1}{2} \cdot 2 \cdot (17.0667) = \frac{256}{15} \approx 17.0667 M x ​ = 2 1 ​ ⋅ 2 ⋅ ( 17.0667 ) = 15 256 ​ ≈ 17.0667 .

Compute y ˉ \bar{y} y ˉ ​ : y ˉ = M x A = 256 / 15 32 / 3 = 256 15 ⋅ 3 32 = 8 5 = 1.60 \bar{y} = \frac{M_x}{A} = \frac{256/15}{32/3} = \frac{256}{15} \cdot \frac{3}{32} = \frac{8}{5} = 1.60 y ˉ ​ = A M x ​ ​ = 32/3 256/15 ​ = 15 256 ​ ⋅ 32 3 ​ = 5 8 ​ = 1.60 Centroid location: ( 0 , 1.60 ) (0, 1.60) ( 0 , 1.60 ) .

Example 3.2.3: Moment of Inertia of a Rectangular Busbar

Problem: Calculate the moment of inertia I x I_x I x ​ of a solid rectangular copper busbar cross-section of width b = 40 mm b = 40\text{ mm} b = 40 mm and height h = 100 mm h = 100\text{ mm} h = 100 mm about its centroidal horizontal axis.

Solution:

Integration setup: Centroidal axis passes through origin y = 0 y=0 y = 0 , bounds from y = − h / 2 = − 50 mm y = -h/2 = -50\text{ mm} y = − h /2 = − 50 mm to y = h / 2 = 50 mm y = h/2 = 50\text{ mm} y = h /2 = 50 mm . I x = ∫ − h / 2 h / 2 y 2 ( b d y ) = b ∫ − h / 2 h / 2 y 2 d y I_x = \int_{-h/2}^{h/2} y^2 (b \, dy) = b \int_{-h/2}^{h/2} y^2 \, dy I x ​ = ∫ − h /2 h /2 ​ y 2 ( b d y ) = b ∫ − h /2 h /2 ​ y 2 d y

Integrate: I x = b [ y 3 3 ] − h / 2 h / 2 = b ( h 3 24 − ( − h 3 24 ) ) = b h 3 12 I_x = b \left[ \frac{y^3}{3} \right]_{-h/2}^{h/2} = b \left( \frac{h^3}{24} - \left(-\frac{h^3}{24}\right) \right) = \frac{b h^3}{12} I x ​ = b [ 3 y 3 ​ ] − h /2 h /2 ​ = b ( 24 h 3 ​ − ( − 24 h 3 ​ ) ) = 12 b h 3 ​

Substitute values: b = 40 mm b = 40\text{ mm} b = 40 mm , h = 100 mm h = 100\text{ mm} h = 100 mm : I x = 40 ⋅ ( 100 ) 3 12 = 40 ⋅ 1 , 000 , 000 12 = 40 , 000 , 000 12 = 3 , 333 , 333.33 mm 4 = 3.333 × 10 6 mm 4 I_x = \frac{40 \cdot (100)^3}{12} = \frac{40 \cdot 1,000,000}{12} = \frac{40,000,000}{12} = 3,333,333.33\text{ mm}^4 = 3.333 \times 10^6\text{ mm}^4 I x ​ = 12 40 ⋅ ( 100 ) 3 ​ = 12 40 ⋅ 1 , 000 , 000 ​ = 12 40 , 000 , 000 ​ = 3 , 333 , 333.33 mm 4 = 3.333 × 1 0 6 mm 4

Loading diagram... Integral Calculus & Application Map