Study guide
14.3 Fundamentals of Electronic Communications
PRC Registered Electrical Engineer REE
Track your progress as you read
Finished sections get a check mark.
1 Chapter 1: Overview, RA 7920 & Electrical Engineering Ethics
1.1 PRC Board of Electrical Engineering & REE Examination Overview 1.2 Republic Act No. 7920 (New Electrical Engineering Law) & License Classes 1.3 Code of Ethics & Professional Practice for Electrical Engineers
2 Chapter 2: Math — Algebra, Trig & Geometry
2.1 Algebraic Equations, Polynomials & Complex Numbers 2.2 Trigonometry — Identities, Triangles & Spherical Trig 2.3 Analytic & Solid Geometry
3 Chapter 3: Engineering Mathematics — Calculus & Differential Equations
3.1 Differential Calculus, Limits, Derivatives & Applications 3.2 Integral Calculus, Integration Techniques & Area/Volume Applications 3.3 Ordinary Differential Equations & Initial-Value Problems
4 Chapter 4: Engineering Mathematics — Advanced Math & Transform Methods
4.1 Laplace Transforms, Inverse Transforms & Circuit Applications 4.2 Fourier Series, Fourier Transforms & Frequency-Domain Analysis 4.3 Vector Analysis, Linear Algebra, Matrices & Complex Analysis
5 Chapter 5: Engineering Mathematics — Probability, Statistics & Engineering Data Analysis
5.1 Probability Theory, Counting Techniques & Bayes' Theorem 5.2 Engineering Data Analysis I — Descriptive Statistics & Probability Distributions 5.3 Engineering Data Analysis II — Confidence Intervals, Hypothesis Testing & Regression
6 Chapter 6: Engineering Mathematics — Numerical Methods & Analysis
6.1 Numerical Root-Finding & Solution of Linear Systems 6.2 Interpolation, Numerical Integration & Numerical Solution of ODEs
7 Chapter 7: ESAS — Physics, Chemistry & Computer Fundamentals
7.1 Physics for Engineers 7.2 General Chemistry & Materials Science 7.3 Computer Fundamentals, Programming & Data Logic 7.4 Logic Circuits, Switching Theory & Microprocessor Systems
8 Chapter 8: ESAS — Mechanics & Thermal-Fluid Engineering
8.1 Engineering Mechanics — Statics & Dynamics 8.2 Strength of Materials & Mechanics of Deformable Bodies 8.3 Thermal-Fluid Engineering — Thermodynamics & Fluid Mechanics
9 Chapter 9: ESAS — Engineering Economics, Management & Contracts
9.1 Engineering Economics & Depreciation 9.2 Engineering Management & Ethics 9.3 Philippine Electrical Engineering Law, Code & Contracts 9.4 Technopreneurship 101 & Management of Engineering Projects
10 Chapter 10: PEC 1 — Safety, Sizing & Protection
10.1 PEC Fundamentals, Safety Standards & Grounding/Bonding 10.2 Conductor Sizing, Ampacity Adjustment & Voltage Drop 10.3 Overcurrent Protection, Branch Circuit & Feeder Sizing 10.4 Basic Occupational Safety & Health (BOSH) and Electrical Safety Standards
11 Chapter 11: PEC 1 & 2 — Equipment & Utility Systems
11.1 PEC Equipment Installation & Wiring Methods 11.2 Utility Systems, Transformers & Switchgear 11.3 Special Occupancies & Hazardous Locations
12 Chapter 12: Electrical Professional — DC & AC Circuit Fundamentals
12.1 DC Circuit Analysis & Network Theorems 12.2 Single-Phase AC Circuits & Phasor Analysis 12.3 Balanced & Unbalanced Three-Phase AC Circuits
13 Chapter 13: Electrical Professional — EM Fields & Transients
13.1 Electrostatics, Magnetostatics & Maxwell's Equations 13.2 Electromagnetic Waves & Transmission Line Fields 13.3 First-Order & Second-Order Circuit Transients
14 Chapter 14: Electrical Professional — Electronics, Industrial Electronics & Communications
14.1 Electronics 1 & 2 — Semiconductor Devices & Analog Circuits 14.2 Electrical Apparatus & Devices — Industrial Electronics & Power Converters 14.3 Fundamentals of Electronic Communications
15 Chapter 15: Electrical Professional — Transformers & DC Machines
15.1 Single-Phase & Three-Phase Transformers 15.2 Transformer Connections & Special Transformers 15.3 DC Generators & DC Motors
16 Chapter 16: Electrical Professional — AC Synchronous & Induction Machinery
16.1 Synchronous Generators (Alternators) 16.2 Synchronous Motors & Special AC Machines 16.3 Three-Phase & Single-Phase Induction Motors
17 Chapter 17: Electrical Professional — Power Plants & Energy Conversion
17.1 Hydroelectric, Thermal & Combined Cycle Power Plants 17.2 Renewable Energy Systems & Geothermal Power Plants 17.3 Power Plant Economics, Load Curves & Energy Conversion
18 Chapter 18: Electrical Professional — Transmission & Distribution
18.1 Transmission Line Parameters & Performance Models 18.2 Mechanical Overhead Line Design, Underground Cables & Insulators 18.3 Distribution Systems, Substation Layouts & Power Flow Control
19 Chapter 19: Electrical Professional — Power System Analysis
19.1 The Per-Unit System, Base Conversion & Impedance Diagrams 19.2 Symmetrical Components & Unbalanced Fault Analysis 19.3 Load Flow, Economic Dispatch & Power System Stability
20 Chapter 20: Electrical Professional — Protection, Control, Instrumentation & Illumination
20.1 Power System Protection & Protective Relaying 20.2 Industrial Motor Control, Logic Circuits & PLC Automation 20.3 Electrical Instrumentation, Transducers & Measurement Systems 20.4 Illumination Engineering, Lighting Design & Photometrics 20.5 Feedback Control Systems & Research Methods
14.3 Fundamentals of Electronic Communications
Key Takeaways Explain This Topic AI
Fundamentals of Electronic Communications shares Enhanced TOS topic D with Electronics 1 and 2 and was listed as Principles of Communication in the predecessor syllabus.
AM total transmitted power is Pt = Pc(1 + m²/2), so even 100% modulation puts only one third of the total power in the two sidebands.
AM bandwidth is twice the highest modulating frequency; FM bandwidth follows Carson's rule, BW = 2(Δf + fm).
Decibel power ratio is 10·log(P2/P1) while voltage ratio is 20·log(V2/V1) at equal impedance; 3 dB is a factor of two in power.
The Nyquist criterion requires a sampling rate of at least twice the highest signal frequency to avoid aliasing, and PCM quantising with n bits gives 2^n levels.
Last updated: August 2026
14.3 Fundamentals of Electronic Communications
Fundamentals of Electronic Communications shares topic D of the Electrical Engineering subject with Electronics 1 and 2 in the PRC Enhanced Table of Specifications (PRBEE Resolution No. 40, s. 2024 ), the pair carrying 2.25% of the whole examination and 5 of the 100 Electrical Engineering items . The 2011 syllabus listed the same content as Principles of Communication . For a practising REE the material is not academic: SCADA telemetry, teleprotection signalling, distribution automation and smart-meter backhaul are all communication systems.
1. Elements of a Communication System Information source → Transmitter → Channel → Receiver → Destination \text{Information source} \rightarrow \text{Transmitter} \rightarrow \text{Channel} \rightarrow \text{Receiver} \rightarrow \text{Destination} Information source → Transmitter → Channel → Receiver → Destination
with noise entering primarily in the channel. Modulation — impressing a low-frequency message onto a high-frequency carrier — exists for four reasons: it allows practical antenna sizes, it permits frequency-division multiplexing of many users, it improves noise immunity, and it matches the signal to the channel.
Antenna length is tied to wavelength, and this is why baseband transmission is impractical: λ = c f , c = 3 × 10 8 m/s \lambda = \frac{c}{f}, \qquad c = 3 \times 10^{8} \text{ m/s} λ = f c , c = 3 × 1 0 8 m/s
A half-wave antenna for a 3 kHz voice signal would be 50 km long; at 100 MHz it is 1.5 m.
2. Amplitude Modulation
The modulation index for a carrier of amplitude V c V_c V c and message amplitude V m V_m V m : m = V m V c = V max − V min V max + V min m = \frac{V_m}{V_c} = \frac{V_{\max} - V_{\min}}{V_{\max} + V_{\min}} m = V c V m = V m a x + V m i n V m a x − V m i n
Overmodulation ( m > 1 m > 1 m > 1 ) clips the envelope and generates severe distortion and splatter into adjacent channels. Bandwidth = 2 f m ( max ) \text{Bandwidth} = 2f_{m(\max)} Bandwidth = 2 f m ( m a x ) P t = P c ( 1 + m 2 2 ) , P S B = P c m 2 2 P_t = P_c\left(1 + \frac{m^{2}}{2}\right), \qquad P_{SB} = P_c\frac{m^{2}}{2} P t = P c ( 1 + 2 m 2 ) , P SB = P c 2 m 2
At m = 1 m = 1 m = 1 , P t = 1.5 P c P_t = 1.5P_c P t = 1.5 P c : two thirds of the transmitted power sits in the carrier, which conveys no information at all. That inefficiency motivates single sideband (SSB) , which suppresses the carrier and one sideband, halving bandwidth and concentrating all power in the intelligence. I t = I c 1 + m 2 2 I_t = I_c\sqrt{1 + \frac{m^{2}}{2}} I t = I c 1 + 2 m 2
For several simultaneous modulating signals, the effective index is m t = m 1 2 + m 2 2 + ⋯ m_t = \sqrt{m_1^{2} + m_2^{2} + \cdots} m t = m 1 2 + m 2 2 + ⋯ .
3. Angle Modulation
- Quantity Frequency modulation Phase modulation
- Varied parameter Instantaneous frequency Instantaneous phase
Modulation index m f = Δ f f m m_f = \dfrac{\Delta f}{f_m} m f = f m Δ f m p = k p V m m_p = k_p V_m m p = k p V m
- Sensitivity Proportional to message amplitude Proportional to message amplitude
- Index vs. f m f_m f m Inversely proportional Independent
Carson's rule gives the practical bandwidth: B W = 2 ( Δ f + f m ) = 2 f m ( m f + 1 ) BW = 2\left(\Delta f + f_m\right) = 2f_m\left(m_f + 1\right) B W = 2 ( Δ f + f m ) = 2 f m ( m f + 1 )
FM trades bandwidth for noise immunity: a limiter strips amplitude noise before demodulation, which AM cannot do. Narrowband FM ( m f < 1 m_f < 1 m f < 1 ) occupies about the same bandwidth as AM; wideband FM broadcasting uses Δ f = 75 \Delta f = 75 Δ f = 75 kHz with f m = 15 f_m = 15 f m = 15 kHz, giving B W = 2 ( 75 + 15 ) = 180 BW = 2(75 + 15) = 180 B W = 2 ( 75 + 15 ) = 180 kHz within the 200 kHz channel allocation.
4. Decibels and Noise d B = 10 log 10 P 2 P 1 = 20 log 10 V 2 V 1 (equal impedances) dB = 10\log_{10}\frac{P_2}{P_1} = 20\log_{10}\frac{V_2}{V_1} \quad \text{(equal impedances)} d B = 10 lo g 10 P 1 P 2 = 20 lo g 10 V 1 V 2 (equal impedances)
- Change Power ratio Voltage ratio
- 3 dB 2 1.414
- 6 dB 4 2
- 10 dB 10 3.162
- 20 dB 100 10
Absolute references: dBm is referred to 1 mW, dBW to 1 W, so 0 dBm = −30 dBW. Cascaded stage gains and losses in decibels simply add .
Thermal noise power in a bandwidth B B B : P n = k T B , k = 1.38 × 10 − 23 J/K P_n = kTB, \qquad k = 1.38 \times 10^{-23} \text{ J/K} P n = k TB , k = 1.38 × 1 0 − 23 J/K N F d B = 10 log 10 ( S / N ) i n ( S / N ) o u t NF_{dB} = 10\log_{10}\frac{(S/N)_{in}}{(S/N)_{out}} N F d B = 10 lo g 10 ( S / N ) o u t ( S / N ) in
Friis' formula shows why the first amplifier dominates the system noise figure: F t o t a l = F 1 + F 2 − 1 G 1 + F 3 − 1 G 1 G 2 + ⋯ F_{total} = F_1 + \frac{F_2 - 1}{G_1} + \frac{F_3 - 1}{G_1G_2} + \cdots F t o t a l = F 1 + G 1 F 2 − 1 + G 1 G 2 F 3 − 1 + ⋯
- 5. Sampling, PCM and Digital Modulation
- Nyquist sampling theorem: f s ≥ 2 f max f_s \ge 2f_{\max} f s ≥ 2 f m a x
Sampling below this rate causes aliasing , in which high-frequency content masquerades irreversibly as low-frequency content. Telephone-quality speech band-limited to 3.4 kHz is sampled at 8 kHz and quantised to 8 bits, giving the familiar 64 kbps PCM channel. Quantisation levels = 2 n , Bit rate = f s × n \text{Quantisation levels} = 2^{n}, \qquad \text{Bit rate} = f_s \times n Quantisation levels = 2 n , Bit rate = f s × n S Q N R d B ≈ 6.02 n + 1.76 SQNR_{dB} \approx 6.02n + 1.76 SQN R d B ≈ 6.02 n + 1.76
Each additional bit buys about 6 dB of signal-to-quantisation-noise ratio.
- Scheme What is varied Notes
- ASK Amplitude Simple, poor noise immunity
- FSK Frequency Robust; used in older telemetry and teleprotection
- PSK / QPSK Phase Better spectral efficiency; QPSK carries 2 bits per symbol
- QAM Amplitude and phase Highest throughput; 16-QAM carries 4 bits per symbol
Shannon-Hartley capacity: C = B log 2 ( 1 + S N ) bits/s C = B\log_{2}\left(1 + \frac{S}{N}\right) \quad \text{bits/s} C = B lo g 2 ( 1 + N S ) bits/s
6. Transmission Media and Utility Communications
- Medium Character Utility use
- Twisted pair Cheap, limited bandwidth, susceptible to interference Local RTU wiring, RS-485 field buses
- Coaxial cable Shielded, wider bandwidth Antenna feeds, older LANs
Optical fibre Enormous bandwidth, complete immunity to electromagnetic interference , no earth-potential-rise problem OPGW on transmission towers, substation LANs, teleprotection
- Microwave / radio No right-of-way needed, line-of-sight required Remote substation SCADA links
- Power line carrier (PLC) Uses the transmission line itself as the channel Legacy teleprotection and telemetry
Fibre's immunity to electromagnetic interference is decisive in substations, where ground-potential rise during a fault can destroy metallic communication circuits and endanger personnel. OPGW — optical ground wire — combines the shield-wire function with an embedded fibre bundle, which is why it has become standard on new transmission lines.
Modern substation communications run IEC 61850 over Ethernet, with GOOSE messaging replacing hard-wired interlocking, and DNP3 or IEC 60870-5-101/104 carrying SCADA telemetry to the control centre.
- Solved Board Exam Examples
- Example 1: AM Power Distribution
An AM transmitter has an unmodulated carrier power of 5 kW and is modulated to 80%. Find the total transmitted power and the power in each sideband.
Solution. P t = P c ( 1 + m 2 2 ) = 5 ( 1 + 0.64 2 ) = 5 ( 1.32 ) = 6.6 kW P_t = P_c\left(1 + \frac{m^{2}}{2}\right) = 5\left(1 + \frac{0.64}{2}\right) = 5(1.32) = \boxed{6.6 \text{ kW}} P t = P c ( 1 + 2 m 2 ) = 5 ( 1 + 2 0.64 ) = 5 ( 1.32 ) = 6.6 kW P S B ( total ) = 6.6 − 5.0 = 1.6 kW ⟹ P each = 0.8 kW P_{SB(\text{total})} = 6.6 - 5.0 = 1.6 \text{ kW} \implies P_{\text{each}} = \boxed{0.8 \text{ kW}} P SB ( total ) = 6.6 − 5.0 = 1.6 kW ⟹ P each = 0.8 kW
Even at 80% modulation, 76% of the transmitted power is spent on a carrier that conveys nothing.
Example 2: FM Bandwidth by Carson's Rule
An FM signal has a maximum deviation of 25 kHz and a highest modulating frequency of 10 kHz. Find the modulation index and the bandwidth.
Solution. m f = Δ f f m = 25 10 = 2.5 m_f = \frac{\Delta f}{f_m} = \frac{25}{10} = 2.5 m f = f m Δ f = 10 25 = 2.5 B W = 2 ( Δ f + f m ) = 2 ( 25 + 10 ) = 70 kHz BW = 2(\Delta f + f_m) = 2(25 + 10) = \boxed{70 \text{ kHz}} B W = 2 ( Δ f + f m ) = 2 ( 25 + 10 ) = 70 kHz
An AM signal carrying the same 10 kHz message would need only 20 kHz — the bandwidth price FM pays for its noise immunity.
Example 3: PCM Bit Rate for a SCADA Voice Channel
An analog channel band-limited to 3.4 kHz is sampled at the standard telephony rate and quantised to 256 levels. Determine the sampling rate, bits per sample and resulting bit rate.
Solution. The Nyquist minimum is 2 ( 3.4 ) = 6.8 2(3.4) = 6.8 2 ( 3.4 ) = 6.8 kHz; the standard practical rate is f s = 8 f_s = 8 f s = 8 kHz, which leaves guard band for the anti-aliasing filter. n = log 2 ( 256 ) = 8 bits per sample n = \log_{2}(256) = 8 \text{ bits per sample} n = lo g 2 ( 256 ) = 8 bits per sample Bit rate = 8000 × 8 = 64 000 bps = 64 kbps \text{Bit rate} = 8000 \times 8 = \boxed{64\,000 \text{ bps} = 64 \text{ kbps}} Bit rate = 8000 × 8 = 64 000 bps = 64 kbps
The signal-to-quantisation-noise ratio is approximately 6.02 ( 8 ) + 1.76 = 49.9 6.02(8) + 1.76 = 49.9 6.02 ( 8 ) + 1.76 = 49.9 dB.