Study guide

14.1 Electronics 1 & 2 — Semiconductor Devices & Analog Circuits

PRC Registered Electrical Engineer REE

Track your progress as you read

Finished sections get a check mark.

1 Chapter 1: Overview, RA 7920 & Electrical Engineering Ethics

1.1 PRC Board of Electrical Engineering & REE Examination Overview 1.2 Republic Act No. 7920 (New Electrical Engineering Law) & License Classes 1.3 Code of Ethics & Professional Practice for Electrical Engineers

2 Chapter 2: Math — Algebra, Trig & Geometry

2.1 Algebraic Equations, Polynomials & Complex Numbers 2.2 Trigonometry — Identities, Triangles & Spherical Trig 2.3 Analytic & Solid Geometry

3 Chapter 3: Engineering Mathematics — Calculus & Differential Equations

3.1 Differential Calculus, Limits, Derivatives & Applications 3.2 Integral Calculus, Integration Techniques & Area/Volume Applications 3.3 Ordinary Differential Equations & Initial-Value Problems

4 Chapter 4: Engineering Mathematics — Advanced Math & Transform Methods

4.1 Laplace Transforms, Inverse Transforms & Circuit Applications 4.2 Fourier Series, Fourier Transforms & Frequency-Domain Analysis 4.3 Vector Analysis, Linear Algebra, Matrices & Complex Analysis

5 Chapter 5: Engineering Mathematics — Probability, Statistics & Engineering Data Analysis

5.1 Probability Theory, Counting Techniques & Bayes' Theorem 5.2 Engineering Data Analysis I — Descriptive Statistics & Probability Distributions 5.3 Engineering Data Analysis II — Confidence Intervals, Hypothesis Testing & Regression

6 Chapter 6: Engineering Mathematics — Numerical Methods & Analysis

6.1 Numerical Root-Finding & Solution of Linear Systems 6.2 Interpolation, Numerical Integration & Numerical Solution of ODEs

7 Chapter 7: ESAS — Physics, Chemistry & Computer Fundamentals

7.1 Physics for Engineers 7.2 General Chemistry & Materials Science 7.3 Computer Fundamentals, Programming & Data Logic 7.4 Logic Circuits, Switching Theory & Microprocessor Systems

8 Chapter 8: ESAS — Mechanics & Thermal-Fluid Engineering

8.1 Engineering Mechanics — Statics & Dynamics 8.2 Strength of Materials & Mechanics of Deformable Bodies 8.3 Thermal-Fluid Engineering — Thermodynamics & Fluid Mechanics

9 Chapter 9: ESAS — Engineering Economics, Management & Contracts

9.1 Engineering Economics & Depreciation 9.2 Engineering Management & Ethics 9.3 Philippine Electrical Engineering Law, Code & Contracts 9.4 Technopreneurship 101 & Management of Engineering Projects

10 Chapter 10: PEC 1 — Safety, Sizing & Protection

10.1 PEC Fundamentals, Safety Standards & Grounding/Bonding 10.2 Conductor Sizing, Ampacity Adjustment & Voltage Drop 10.3 Overcurrent Protection, Branch Circuit & Feeder Sizing 10.4 Basic Occupational Safety & Health (BOSH) and Electrical Safety Standards

11 Chapter 11: PEC 1 & 2 — Equipment & Utility Systems

11.1 PEC Equipment Installation & Wiring Methods 11.2 Utility Systems, Transformers & Switchgear 11.3 Special Occupancies & Hazardous Locations

12 Chapter 12: Electrical Professional — DC & AC Circuit Fundamentals

12.1 DC Circuit Analysis & Network Theorems 12.2 Single-Phase AC Circuits & Phasor Analysis 12.3 Balanced & Unbalanced Three-Phase AC Circuits

13 Chapter 13: Electrical Professional — EM Fields & Transients

13.1 Electrostatics, Magnetostatics & Maxwell's Equations 13.2 Electromagnetic Waves & Transmission Line Fields 13.3 First-Order & Second-Order Circuit Transients

14 Chapter 14: Electrical Professional — Electronics, Industrial Electronics & Communications

14.1 Electronics 1 & 2 — Semiconductor Devices & Analog Circuits 14.2 Electrical Apparatus & Devices — Industrial Electronics & Power Converters 14.3 Fundamentals of Electronic Communications

15 Chapter 15: Electrical Professional — Transformers & DC Machines

15.1 Single-Phase & Three-Phase Transformers 15.2 Transformer Connections & Special Transformers 15.3 DC Generators & DC Motors

16 Chapter 16: Electrical Professional — AC Synchronous & Induction Machinery

16.1 Synchronous Generators (Alternators) 16.2 Synchronous Motors & Special AC Machines 16.3 Three-Phase & Single-Phase Induction Motors

17 Chapter 17: Electrical Professional — Power Plants & Energy Conversion

17.1 Hydroelectric, Thermal & Combined Cycle Power Plants 17.2 Renewable Energy Systems & Geothermal Power Plants 17.3 Power Plant Economics, Load Curves & Energy Conversion

18 Chapter 18: Electrical Professional — Transmission & Distribution

18.1 Transmission Line Parameters & Performance Models 18.2 Mechanical Overhead Line Design, Underground Cables & Insulators 18.3 Distribution Systems, Substation Layouts & Power Flow Control

19 Chapter 19: Electrical Professional — Power System Analysis

19.1 The Per-Unit System, Base Conversion & Impedance Diagrams 19.2 Symmetrical Components & Unbalanced Fault Analysis 19.3 Load Flow, Economic Dispatch & Power System Stability

20 Chapter 20: Electrical Professional — Protection, Control, Instrumentation & Illumination

20.1 Power System Protection & Protective Relaying 20.2 Industrial Motor Control, Logic Circuits & PLC Automation 20.3 Electrical Instrumentation, Transducers & Measurement Systems 20.4 Illumination Engineering, Lighting Design & Photometrics 20.5 Feedback Control Systems & Research Methods

14.1 Electronics 1 & 2 — Semiconductor Devices & Analog Circuits

Key Takeaways Explain This Topic AI

A silicon PN junction conducts above roughly 0.7 V forward bias (0.3 V for germanium); this offset is what separates the ideal-diode answer from the practical-diode answer.

Half-wave rectifier output is Vdc = Vm/π with ripple factor 1.21; full-wave and bridge give Vdc = 2Vm/π with ripple factor 0.482.

A BJT relates its terminal currents by IE = IB + IC, with β = IC/IB and α = IC/IE, so β = α/(1 − α).

An ideal operational amplifier has infinite open-loop gain, infinite input impedance and zero output impedance, which forces the virtual-short condition when negative feedback is present.

Inverting op-amp gain is −Rf/Rin and non-inverting gain is 1 + Rf/Rin; only the non-inverting configuration preserves signal polarity.

Last updated: August 2026

14.1 Electronics 1 & 2 — Semiconductor Devices & Analog Circuits

Topic D of the Electrical Engineering subject in the PRC Enhanced Table of Specifications (PRBEE Resolution No. 40, s. 2024 ) is Fundamentals of Electronic Communications, Electronics 1 and 2 , weighted 2.25% of the whole examination and 5 of the 100 Electrical Engineering items . The predecessor 2011 syllabus called the same material Electronic Theory and Circuits , so this is long-standing REE content, not a new addition. Every variable-frequency drive, protective relay, UPS and smart meter in an electrical engineer's plant is built on the devices covered here.

1. Semiconductor Fundamentals

Intrinsic silicon has four valence electrons and a band gap of about 1.1 eV (germanium, 0.67 eV). Doping creates the two extrinsic types:

  • Type Dopant Group Majority carrier Minority carrier
  • N-type Phosphorus, arsenic, antimony V (pentavalent) Electrons Holes
  • P-type Boron, gallium, indium III (trivalent) Holes Electrons

At a PN junction , diffusion creates a depletion region and a built-in barrier potential of roughly 0.7 V for silicon and 0.3 V for germanium . Semiconductors have a negative temperature coefficient of resistance — resistance falls as temperature rises — the opposite of metallic conductors, and a favourite true/false item.

2. Diodes and Diode Circuits

Shockley equation: I D = I S ( e V D / n V T − 1 ) , V T = k T q ≈ 26 mV at 300 K I_D = I_S\left(e^{\,V_D/nV_T} - 1\right), \qquad V_T = \frac{kT}{q} \approx 26 \text{ mV at } 300 \text{ K} I D ​ = I S ​ ( e V D ​ / n V T ​ − 1 ) , V T ​ = q k T ​ ≈ 26 mV at 300 K

Models: the ideal diode is a closed switch when forward-biased; the practical model adds the 0.7 V drop; the complete model adds bulk resistance r d ≈ 26 mV / I D r_d \approx 26\text{ mV}/I_D r d ​ ≈ 26 mV / I D ​ .

Rectifier Circuits

  • Parameter Half-wave Full-wave centre-tap Full-wave bridge
  • Diodes required 1 2 4

V d c V_{dc} V d c ​ (ideal) V m π = 0.318 V m \dfrac{V_m}{\pi} = 0.318V_m π V m ​ ​ = 0.318 V m ​ 2 V m π = 0.636 V m \dfrac{2V_m}{\pi} = 0.636V_m π 2 V m ​ ​ = 0.636 V m ​ 2 V m π = 0.636 V m \dfrac{2V_m}{\pi} = 0.636V_m π 2 V m ​ ​ = 0.636 V m ​

V r m s V_{rms} V r m s ​ V m 2 \dfrac{V_m}{2} 2 V m ​ ​ V m 2 \dfrac{V_m}{\sqrt{2}} 2 ​ V m ​ ​ V m 2 \dfrac{V_m}{\sqrt{2}} 2 ​ V m ​ ​

  • Ripple factor r r r 1.21 0.482 0.482
  • Ripple frequency f f f 2 f 2f 2 f 2 f 2f 2 f
  • Peak inverse voltage V m V_m V m ​ 2 V m 2V_m 2 V m ​ V m V_m V m ​

Max efficiency 40.6 % 40.6\% 40.6% 81.2 % 81.2\% 81.2% 81.2 % 81.2\% 81.2% r = V a c , r m s V d c = ( V r m s V d c ) 2 − 1 r = \frac{V_{ac,rms}}{V_{dc}} = \sqrt{\left(\frac{V_{rms}}{V_{dc}}\right)^{2} - 1} r = V d c ​ V a c , r m s ​ ​ = ( V d c ​ V r m s ​ ​ ) 2 − 1 ​

The bridge rectifier is preferred in practice because it achieves full-wave performance at only V m V_m V m ​ peak inverse voltage — half the PIV stress of the centre-tap arrangement.

Capacitor filtering reduces ripple; for light loading, V r ( p p ) ≈ I d c f r i p p l e C V_{r(pp)} \approx \frac{I_{dc}}{f_{ripple}\,C} V r ( pp ) ​ ≈ f r i ppl e ​ C I d c ​ ​

Other Diode Applications

Clippers limit a waveform's amplitude; clampers shift its DC level without changing its shape.

Zener diodes operate in reverse breakdown as voltage references; the series resistor must satisfy I Z ( min ⁡ ) ≤ I Z ≤ I Z ( max ⁡ ) I_{Z(\min)} \le I_Z \le I_{Z(\max)} I Z ( m i n ) ​ ≤ I Z ​ ≤ I Z ( m a x ) ​ across the full load and line range.

Schottky diodes give a low 0.3 V drop and fast recovery; LEDs convert carrier recombination to photons; photodiodes and varactors exploit reverse-bias behaviour.

3. Bipolar Junction Transistors

A BJT is a current-controlled device with three terminals and two junctions: I E = I B + I C , β = I C I B , α = I C I E , β = α 1 − α , α = β 1 + β I_E = I_B + I_C, \qquad \beta = \frac{I_C}{I_B}, \qquad \alpha = \frac{I_C}{I_E}, \qquad \beta = \frac{\alpha}{1 - \alpha}, \qquad \alpha = \frac{\beta}{1 + \beta} I E ​ = I B ​ + I C ​ , β = I B ​ I C ​ ​ , α = I E ​ I C ​ ​ , β = 1 − α α ​ , α = 1 + β β ​

Operating Regions

  • Region Emitter junction Collector junction Use
  • Cutoff Reverse Reverse Switch OFF
  • Active Forward Reverse Linear amplification
  • Saturation Forward Forward Switch ON, V C E ( s a t ) ≈ 0.2 V_{CE(sat)} \approx 0.2 V CE ( s a t ) ​ ≈ 0.2 V
  • Configurations
  • Configuration Current gain Voltage gain Input Z Z Z Phase shift Typical use
  • Common emitter High High Medium 180° General amplification
  • Common base < 1 <1 < 1 High Low 0° High-frequency stages
  • Common collector (emitter follower) High ≈ 1 \approx 1 ≈ 1 High 0° Impedance buffering

Only the common-emitter stage inverts. The emitter follower has near-unity voltage gain but high input and low output impedance, which is why it buffers a high-impedance sensor into a low-impedance load.

4. Field-Effect Transistors

FETs are voltage-controlled and unipolar (one carrier type), with very high input impedance because the gate draws essentially no current.

JFET (depletion mode) — Shockley's equation: I D = I D S S ( 1 − V G S V P ) 2 I_D = I_{DSS}\left(1 - \frac{V_{GS}}{V_P}\right)^{2} I D ​ = I D SS ​ ( 1 − V P ​ V GS ​ ​ ) 2

Enhancement MOSFET in saturation: I D = k ( V G S − V T H ) 2 I_D = k\left(V_{GS} - V_{TH}\right)^{2} I D ​ = k ( V GS ​ − V T H ​ ) 2

The power MOSFET dominates switching below a few hundred volts, while the IGBT combines a MOSFET gate with a bipolar output stage for higher voltage and current — the standard device in motor drives and inverters, covered in the next section.

5. Operational Amplifiers

The ideal op-amp : infinite open-loop gain, infinite input impedance, zero output impedance, infinite bandwidth, zero offset. With negative feedback , infinite gain forces the two inputs to the same potential — the virtual short — and infinite input impedance forces zero input current. Those two facts solve every configuration below.

Configuration Output expression Notes

Inverting V o = − R f R i n V i n V_o = -\dfrac{R_f}{R_{in}}V_{in} V o ​ = − R in ​ R f ​ ​ V in ​ Virtual ground at the inverting input

Non-inverting V o = ( 1 + R f R i n ) V i n V_o = \left(1 + \dfrac{R_f}{R_{in}}\right)V_{in} V o ​ = ( 1 + R in ​ R f ​ ​ ) V in ​ Gain is always ≥ 1 \ge 1 ≥ 1

Voltage follower V o = V i n V_o = V_{in} V o ​ = V in ​ Unity gain buffer, very high input Z Z Z

Summing V o = − R f ( V 1 R 1 + V 2 R 2 + ⋯ ) V_o = -R_f\left(\dfrac{V_1}{R_1} + \dfrac{V_2}{R_2} + \cdots\right) V o ​ = − R f ​ ( R 1 ​ V 1 ​ ​ + R 2 ​ V 2 ​ ​ + ⋯ ) Analog adder

Difference V o = R f R 1 ( V 2 − V 1 ) V_o = \dfrac{R_f}{R_1}(V_2 - V_1) V o ​ = R 1 ​ R f ​ ​ ( V 2 ​ − V 1 ​ ) Basis of the instrumentation amplifier

Integrator V o = − 1 R C ∫ V i n d t V_o = -\dfrac{1}{RC}\displaystyle\int V_{in}\,dt V o ​ = − RC 1 ​ ∫ V in ​ d t Capacitor in feedback

Differentiator V o = − R C d V i n d t V_o = -RC\dfrac{dV_{in}}{dt} V o ​ = − RC d t d V in ​ ​ Capacitor at input; noise-sensitive

Comparator Saturates to ± V s a t \pm V_{sat} ± V s a t ​ Open loop — no negative feedback, so no virtual short

The comparator exception is examined constantly: without negative feedback the virtual-short assumption is invalid and the output slams to a rail.

Common-mode rejection ratio: C M R R = 20 log ⁡ 10 A d A c m dB CMRR = 20\log_{10}\frac{A_d}{A_{cm}} \quad \text{dB} CMRR = 20 lo g 10 ​ A c m ​ A d ​ ​ dB

  • Solved Board Exam Examples
  • Example 1: Bridge Rectifier Output

A bridge rectifier is fed from a transformer secondary of 24 V rms at 60 Hz. Using the practical diode model, find the DC output voltage and the ripple frequency.

Solution. Peak secondary voltage: V m = 24 2 = 33.94 V V_m = 24\sqrt{2} = 33.94 \text{ V} V m ​ = 24 2 ​ = 33.94 V

In a bridge, two diodes conduct in series each half cycle: V m ( load ) = 33.94 − 2 ( 0.7 ) = 32.54 V V_{m(\text{load})} = 33.94 - 2(0.7) = 32.54 \text{ V} V m ( load ) ​ = 33.94 − 2 ( 0.7 ) = 32.54 V V d c = 2 V m π = 2 ( 32.54 ) π = 20.72 V V_{dc} = \frac{2V_{m}}{\pi} = \frac{2(32.54)}{\pi} = \boxed{20.72 \text{ V}} V d c ​ = π 2 V m ​ ​ = π 2 ( 32.54 ) ​ = 20.72 V ​

The ripple frequency is 2 f = 120 Hz 2f = \boxed{120 \text{ Hz}} 2 f = 120 Hz ​ , because both half cycles are used. Ignoring the two diode drops would give 21.61 V — the intended distractor.

Example 2: BJT Current Relationships

A transistor has β = 120 \beta = 120 β = 120 and a base current of 40 µA. Find I C I_C I C ​ , I E I_E I E ​ and α \alpha α .

Solution. I C = β I B = 120 ( 40 μ A ) = 4.80 mA I_C = \beta I_B = 120(40\ \mu\text{A}) = 4.80 \text{ mA} I C ​ = β I B ​ = 120 ( 40 μ A ) = 4.80 mA I E = I B + I C = 0.04 + 4.80 = 4.84 mA I_E = I_B + I_C = 0.04 + 4.80 = \boxed{4.84 \text{ mA}} I E ​ = I B ​ + I C ​ = 0.04 + 4.80 = 4.84 mA ​ α = β 1 + β = 120 121 = 0.9917 \alpha = \frac{\beta}{1+\beta} = \frac{120}{121} = \boxed{0.9917} α = 1 + β β ​ = 121 120 ​ = 0.9917 ​

Note that α \alpha α is always slightly less than unity, and the base current is never negligible in the emitter-current sum even though it is small.

Example 3: Op-Amp Gain Configuration

An op-amp has R f = 100 R_f = 100 R f ​ = 100 kΩ and R i n = 10 R_{in} = 10 R in ​ = 10 kΩ. Compare the output for a +0.5 V input in the inverting and non-inverting configurations.

Solution. Inverting: V o = − 100 10 ( 0.5 ) = − 5.0 V V_o = -\frac{100}{10}(0.5) = \boxed{-5.0 \text{ V}} V o ​ = − 10 100 ​ ( 0.5 ) = − 5.0 V ​

Non-inverting: V o = ( 1 + 100 10 ) ( 0.5 ) = 11 ( 0.5 ) = + 5.5 V V_o = \left(1 + \frac{100}{10}\right)(0.5) = 11(0.5) = \boxed{+5.5 \text{ V}} V o ​ = ( 1 + 10 100 ​ ) ( 0.5 ) = 11 ( 0.5 ) = + 5.5 V ​

The non-inverting gain is always one greater in magnitude and preserves polarity. A candidate who writes + 5.0 +5.0 + 5.0 V for the non-inverting case has dropped the "1 +" term, which is the single most common op-amp error on the board exam.

Loading diagram... Map of Semiconductor Devices and Their Governing Rules

Rectifier Performance Ratios — Half-Wave vs Full-Wave