Study guide
9.3 Philippine Electrical Engineering Law, Code & Contracts
PRC Registered Electrical Engineer REE
Track your progress as you read
Finished sections get a check mark.
1 Chapter 1: Overview, RA 7920 & Electrical Engineering Ethics
1.1 PRC Board of Electrical Engineering & REE Examination Overview 1.2 Republic Act No. 7920 (New Electrical Engineering Law) & License Classes 1.3 Code of Ethics & Professional Practice for Electrical Engineers
2 Chapter 2: Math — Algebra, Trig & Geometry
2.1 Algebraic Equations, Polynomials & Complex Numbers 2.2 Trigonometry — Identities, Triangles & Spherical Trig 2.3 Analytic & Solid Geometry
3 Chapter 3: Engineering Mathematics — Calculus & Differential Equations
3.1 Differential Calculus, Limits, Derivatives & Applications 3.2 Integral Calculus, Integration Techniques & Area/Volume Applications 3.3 Ordinary Differential Equations & Initial-Value Problems
4 Chapter 4: Engineering Mathematics — Advanced Math & Transform Methods
4.1 Laplace Transforms, Inverse Transforms & Circuit Applications 4.2 Fourier Series, Fourier Transforms & Frequency-Domain Analysis 4.3 Vector Analysis, Linear Algebra, Matrices & Complex Analysis
5 Chapter 5: Engineering Mathematics — Probability, Statistics & Engineering Data Analysis
5.1 Probability Theory, Counting Techniques & Bayes' Theorem 5.2 Engineering Data Analysis I — Descriptive Statistics & Probability Distributions 5.3 Engineering Data Analysis II — Confidence Intervals, Hypothesis Testing & Regression
6 Chapter 6: Engineering Mathematics — Numerical Methods & Analysis
6.1 Numerical Root-Finding & Solution of Linear Systems 6.2 Interpolation, Numerical Integration & Numerical Solution of ODEs
7 Chapter 7: ESAS — Physics, Chemistry & Computer Fundamentals
7.1 Physics for Engineers 7.2 General Chemistry & Materials Science 7.3 Computer Fundamentals, Programming & Data Logic 7.4 Logic Circuits, Switching Theory & Microprocessor Systems
8 Chapter 8: ESAS — Mechanics & Thermal-Fluid Engineering
8.1 Engineering Mechanics — Statics & Dynamics 8.2 Strength of Materials & Mechanics of Deformable Bodies 8.3 Thermal-Fluid Engineering — Thermodynamics & Fluid Mechanics
9 Chapter 9: ESAS — Engineering Economics, Management & Contracts
9.1 Engineering Economics & Depreciation 9.2 Engineering Management & Ethics 9.3 Philippine Electrical Engineering Law, Code & Contracts 9.4 Technopreneurship 101 & Management of Engineering Projects
10 Chapter 10: PEC 1 — Safety, Sizing & Protection
10.1 PEC Fundamentals, Safety Standards & Grounding/Bonding 10.2 Conductor Sizing, Ampacity Adjustment & Voltage Drop 10.3 Overcurrent Protection, Branch Circuit & Feeder Sizing 10.4 Basic Occupational Safety & Health (BOSH) and Electrical Safety Standards
11 Chapter 11: PEC 1 & 2 — Equipment & Utility Systems
11.1 PEC Equipment Installation & Wiring Methods 11.2 Utility Systems, Transformers & Switchgear 11.3 Special Occupancies & Hazardous Locations
12 Chapter 12: Electrical Professional — DC & AC Circuit Fundamentals
12.1 DC Circuit Analysis & Network Theorems 12.2 Single-Phase AC Circuits & Phasor Analysis 12.3 Balanced & Unbalanced Three-Phase AC Circuits
13 Chapter 13: Electrical Professional — EM Fields & Transients
13.1 Electrostatics, Magnetostatics & Maxwell's Equations 13.2 Electromagnetic Waves & Transmission Line Fields 13.3 First-Order & Second-Order Circuit Transients
14 Chapter 14: Electrical Professional — Electronics, Industrial Electronics & Communications
14.1 Electronics 1 & 2 — Semiconductor Devices & Analog Circuits 14.2 Electrical Apparatus & Devices — Industrial Electronics & Power Converters 14.3 Fundamentals of Electronic Communications
15 Chapter 15: Electrical Professional — Transformers & DC Machines
15.1 Single-Phase & Three-Phase Transformers 15.2 Transformer Connections & Special Transformers 15.3 DC Generators & DC Motors
16 Chapter 16: Electrical Professional — AC Synchronous & Induction Machinery
16.1 Synchronous Generators (Alternators) 16.2 Synchronous Motors & Special AC Machines 16.3 Three-Phase & Single-Phase Induction Motors
17 Chapter 17: Electrical Professional — Power Plants & Energy Conversion
17.1 Hydroelectric, Thermal & Combined Cycle Power Plants 17.2 Renewable Energy Systems & Geothermal Power Plants 17.3 Power Plant Economics, Load Curves & Energy Conversion
18 Chapter 18: Electrical Professional — Transmission & Distribution
18.1 Transmission Line Parameters & Performance Models 18.2 Mechanical Overhead Line Design, Underground Cables & Insulators 18.3 Distribution Systems, Substation Layouts & Power Flow Control
19 Chapter 19: Electrical Professional — Power System Analysis
19.1 The Per-Unit System, Base Conversion & Impedance Diagrams 19.2 Symmetrical Components & Unbalanced Fault Analysis 19.3 Load Flow, Economic Dispatch & Power System Stability
20 Chapter 20: Electrical Professional — Protection, Control, Instrumentation & Illumination
20.1 Power System Protection & Protective Relaying 20.2 Industrial Motor Control, Logic Circuits & PLC Automation 20.3 Electrical Instrumentation, Transducers & Measurement Systems 20.4 Illumination Engineering, Lighting Design & Photometrics 20.5 Feedback Control Systems & Research Methods
9.3 Philippine Electrical Engineering Law, Code & Contracts
Key Takeaways Explain This Topic AI
Republic Act No. 7920 establishes the Board of Electrical Engineering and regulates practice cadres: Professional Electrical Engineer (PEE), Registered Electrical Engineer (REE), and Registered Master Electrician (RME).
PEEs hold sole statutory authority under RA 7920 to sign and seal electrical plans, technical specifications, and design reports for building permit issuance.
The Philippine Electrical Code (PEC Part 1 for building installations and PEC Part 2 for electric supply lines) is legally mandatory under RA 7920 and the National Building Code (PD 1096).
Under Article 1318 of the Philippine Civil Code, valid engineering contracts require three essential requisites: consent of contracting parties, object certain, and cause or consideration.
Government procurement under RA 9184 mandates competitive bidding, performance security, and liquidated damages assessed at 1 10 \frac{1}{10} 10 1 of 1% (0.1%) per day of delay.
Last updated: August 2026
9.3 Philippine Electrical Engineering Law, Code & Contracts
Legal compliance, code adherence, and contract administration form the statutory backbone of electrical engineering practice in the Philippines. For the REE Licensure Examination under ESAS, candidates must demonstrate thorough mastery of Republic Act No. 7920 , the Philippine Electrical Code (PEC Parts 1 & 2) , Philippine contract law under the Civil Code , government procurement rules ( RA 9184 ), labor safety mandates, and civil liability.
1. Republic Act No. 7920 (New Electrical Engineering Law)
Approved on February 24, 1995 , RA 7920 repealed Republic Act No. 184 (the Old Electrical Engineering Law of 1947) under its Section 43, modernizing electrical engineering practice, establishing professional standards, and defining practitioner scopes.
The Board of Electrical Engineering (BEE)
Composition: A Chairman and two (2) Members appointed by the President of the Philippines from nominees submitted by the PRC and the Integrated Electrical Engineers of the Philippines ( IIEE ).
Statutory Powers: Administer licensure exams, issue/revoke certificates of registration, inspect electrical plants and educational institutions, and enforce compliance.
Comparison of Cadres and Operational Boundaries
Feature / Scope Professional Electrical Engineer (PEE) Registered Electrical Engineer (REE) Registered Master Electrician (RME)
Statutory Field Authority Sole authority to seal/sign all engineering plans, specs, & permits Operation, maintenance, supervision, and testing of power systems Execution of electrical wiring, maintenance, & installation
System Voltage Limit Any standard voltage Any standard voltage (Sec. 33 names PEE and REE together) Independent work up to 600 V ; above that, PEE/REE supervision
Connected Load Limit Unlimited kVA capacity Unlimited kVA capacity Aggregate connected load up to 500 kVA
Plan Sealing Rights Authorized for all permit plans Not authorized to sign/seal plans for permits Not authorized to sign/seal plans
Plan Sealing & Technical Document Mandates (Section 33)
It is unlawful for any person to sign, stamp, or seal any electrical plan, specification, estimate, or technical report unless they are a duly registered Professional Electrical Engineer (PEE) holding a valid certificate and professional ID.
Penal Provisions (Section 40)
Unlawful practice of electrical engineering or violation of RA 7920 carries statutory criminal penalties:
Fine: Not less than ₱10,000 nor more than ₱50,000 .
Imprisonment: Not less than 6 months nor more than 5 years , or both at the discretion of the court.
2. Philippine Electrical Code (PEC Parts 1 & 2)
The Philippine Electrical Code establishes statutory technical standards to safeguard persons and property from hazards arising from the use of electricity.
Legal Enforcement Basis
Compliance with PEC is mandated by RA 7920 Section 32 and Presidential Decree No. 1096 (National Building Code of the Philippines).
Building officials will not issue electrical permits or certificates of final electrical inspection (CFEI) without full PEC compliance.
Structure of the PEC
PEC Part 1 (Building & Premises Wiring): Adapted primarily from the US National Electrical Code (NEC / NFPA 70).
Covers wiring design, conductor ampacity, branch circuits, feeders, grounding, overcurrent protection, transformers, motors, and hazardous locations.
Standard nominal system voltages: 230 V 230\ \text{V} 230 V single-phase, 230 / 400 V 230/400\ \text{V} 230/400 V three-phase 4-wire, 460 V 460\ \text{V} 460 V three-phase.
Nominal frequency: 60 Hz nationwide.
PEC Part 2 (Electric Supply Stations & Overhead/Underground Lines): Adapted primarily from the National Electrical Safety Code (NESC / IEEE C2).
Covers utility transmission lines, distribution overhead clearance, pole strength, underground conduits, and substation safety clearances.
3. Engineering Contracts, Specifications & Public Procurement (RA 9184)
An engineering contract is a legally binding agreement between two or more parties to execute engineering works or supply goods for valuable consideration.
Essential Requisites of a Contract (Civil Code Article 1318)
No contract exists unless the following three elements concur:
Consent: Manifested by the meeting of the offer and the acceptance upon the thing and the cause which are to constitute the contract.
Object Certain: The specific subject matter of the contract (e.g., construction of a 138 kV 138\ \text{kV} 138 kV substation).
Cause / Consideration: The essential reason or price inducing each contracting party to enter into the obligation.
Types of Engineering Contracts
Lump Sum (Fixed Price): Contractor agrees to complete the entire scope for a single fixed sum. Contractor assumes cost overrun risks.
Unit Price Contract: Payments based on measured quantities of specified work items at fixed unit rates.
Cost-Plus Contract: Owner reimburses actual construction costs plus a fee (fixed fee or percentage) to cover overhead and profit.
Turnkey / EPC (Engineering, Procurement, Construction): Contractor delivers a fully completed, tested, and operational facility ready for immediate turn-on.
Public Procurement Rules (RA 9184 - Government Procurement Reform Act)
Governs all procurement by Philippine government agencies, GOCCs, and local government units:
Approved Budget for the Contract (ABC): The upper ceiling for acceptable bid prices. Bids exceeding the ABC are automatically rejected.
Bids and Awards Committee (BAC): Conducts competitive public bidding and evaluation.
Performance Security: Guarantee posted by winning bidder to ensure faithful contract performance.
Liquidated Damages: Mandatory penalty assessed against a contractor for unexcused delays in project completion: Liquidated Damages per Day = 1 10 of 1 % of Contract Value = 0.001 × Unperformed Contract Amount \text{Liquidated Damages per Day} = \frac{1}{10} \text{ of } 1\% \text{ of Contract Value} = 0.001 \times \text{Unperformed Contract Amount} Liquidated Damages per Day = 10 1 of 1% of Contract Value = 0.001 × Unperformed Contract Amount
- 4. Professional Liability, Torts & Environmental Regulations
- Structural & Building Civil Liability (Civil Code Article 1723)
The engineer who drew up the plans and specifications for a building is liable for damages if within fifteen (15) years from the completion of the structure, it should collapse or suffer major damage due to defects in the plans, calculations, or supervision.
Action to recover damages must be brought within ten (10) years following the collapse/damage.
Philippine Environmental & Safety Laws Relevant to EE Practice
RA 8749 (Philippine Clean Air Act of 1999): Regulates stack emissions from thermal power plants and standby diesel generator sets.
RA 9275 (Philippine Clean Water Act of 2004): Governs thermal wastewater discharge from power plant cooling systems.
RA 6969 (Toxic Substances and Hazardous Waste Act): Strict regulation and phase-out of Polychlorinated Biphenyls ( PCBs ) historically used as dielectric insulating fluid in power transformers and capacitors.
RA 11058 (Occupational Safety and Health Law): Mandates safety officers, PPE, and hazard controls at construction and engineering worksites.
- Solved Board Exam Examples
- Example 1: Liquidated Damages Calculation under RA 9184
Problem: A contractor was awarded a government contract valued at PHP 20 , 000 , 000 \text{PHP }20,000,000 PHP 20 , 000 , 000 to build a municipal distribution extension. The project experienced unexcused delays of 15 calendar days beyond the approved completion date. Calculate the total liquidated damages payable by the contractor.
Solution:
Identify statutory daily rate under RA 9184: 1 10 \frac{1}{10} 10 1 of 1 % 1\% 1% per day ( 0.001 0.001 0.001 per day).
Calculate daily liquidated damage amount: Daily Damage = 0.001 × 20 , 000 , 000 = PHP 20 , 000 per day \text{Daily Damage} = 0.001 \times 20,000,000 = \text{PHP }20,000 \text{ per day} Daily Damage = 0.001 × 20 , 000 , 000 = PHP 20 , 000 per day
Multiply by total delay period (15 days): Total Liquidated Damages = 15 × 20 , 000 = PHP 300 , 000 \text{Total Liquidated Damages} = 15 \times 20,000 = \text{PHP }300,000 Total Liquidated Damages = 15 × 20 , 000 = PHP 300 , 000
Example 2: Legal Scope Evaluation under RA 7920
Problem: An industrial factory operates an electrical load of 3 , 000 kVA 3,000\ \text{kVA} 3 , 000 kVA at a nominal service voltage of 13.8 kV 13.8\ \text{kV} 13.8 kV . A Registered Electrical Engineer (REE) is employed as the plant electrical engineer. The factory management requests the REE to sign and seal the technical plans for a proposed 500 kVA 500\ \text{kVA} 500 kVA substation expansion to submit to the city building official for a permit. Can the REE legally sign and seal these plans?
Solution:
Analyze statutory rights under RA 7920 Section 33.
Although an REE is authorized to take charge of the operation and maintenance of electrical plants up to 150 kV 150\ \text{kV} 150 kV , only a Professional Electrical Engineer (PEE) holds statutory legal authority to sign and seal electrical plans, specifications, and design calculations for permit applications.
Conclusion: No, the REE cannot legally sign and seal the plans. The factory management must engage a registered Professional Electrical Engineer (PEE) to review, sign, and seal the electrical plans.