Study guide

1.3 Code of Ethics & Professional Practice for Electrical Engineers

PRC Registered Electrical Engineer REE

Track your progress as you read

Finished sections get a check mark.

1 Chapter 1: Overview, RA 7920 & Electrical Engineering Ethics

1.1 PRC Board of Electrical Engineering & REE Examination Overview 1.2 Republic Act No. 7920 (New Electrical Engineering Law) & License Classes 1.3 Code of Ethics & Professional Practice for Electrical Engineers

2 Chapter 2: Math — Algebra, Trig & Geometry

2.1 Algebraic Equations, Polynomials & Complex Numbers 2.2 Trigonometry — Identities, Triangles & Spherical Trig 2.3 Analytic & Solid Geometry

3 Chapter 3: Engineering Mathematics — Calculus & Differential Equations

3.1 Differential Calculus, Limits, Derivatives & Applications 3.2 Integral Calculus, Integration Techniques & Area/Volume Applications 3.3 Ordinary Differential Equations & Initial-Value Problems

4 Chapter 4: Engineering Mathematics — Advanced Math & Transform Methods

4.1 Laplace Transforms, Inverse Transforms & Circuit Applications 4.2 Fourier Series, Fourier Transforms & Frequency-Domain Analysis 4.3 Vector Analysis, Linear Algebra, Matrices & Complex Analysis

5 Chapter 5: Engineering Mathematics — Probability, Statistics & Engineering Data Analysis

5.1 Probability Theory, Counting Techniques & Bayes' Theorem 5.2 Engineering Data Analysis I — Descriptive Statistics & Probability Distributions 5.3 Engineering Data Analysis II — Confidence Intervals, Hypothesis Testing & Regression

6 Chapter 6: Engineering Mathematics — Numerical Methods & Analysis

6.1 Numerical Root-Finding & Solution of Linear Systems 6.2 Interpolation, Numerical Integration & Numerical Solution of ODEs

7 Chapter 7: ESAS — Physics, Chemistry & Computer Fundamentals

7.1 Physics for Engineers 7.2 General Chemistry & Materials Science 7.3 Computer Fundamentals, Programming & Data Logic 7.4 Logic Circuits, Switching Theory & Microprocessor Systems

8 Chapter 8: ESAS — Mechanics & Thermal-Fluid Engineering

8.1 Engineering Mechanics — Statics & Dynamics 8.2 Strength of Materials & Mechanics of Deformable Bodies 8.3 Thermal-Fluid Engineering — Thermodynamics & Fluid Mechanics

9 Chapter 9: ESAS — Engineering Economics, Management & Contracts

9.1 Engineering Economics & Depreciation 9.2 Engineering Management & Ethics 9.3 Philippine Electrical Engineering Law, Code & Contracts 9.4 Technopreneurship 101 & Management of Engineering Projects

10 Chapter 10: PEC 1 — Safety, Sizing & Protection

10.1 PEC Fundamentals, Safety Standards & Grounding/Bonding 10.2 Conductor Sizing, Ampacity Adjustment & Voltage Drop 10.3 Overcurrent Protection, Branch Circuit & Feeder Sizing 10.4 Basic Occupational Safety & Health (BOSH) and Electrical Safety Standards

11 Chapter 11: PEC 1 & 2 — Equipment & Utility Systems

11.1 PEC Equipment Installation & Wiring Methods 11.2 Utility Systems, Transformers & Switchgear 11.3 Special Occupancies & Hazardous Locations

12 Chapter 12: Electrical Professional — DC & AC Circuit Fundamentals

12.1 DC Circuit Analysis & Network Theorems 12.2 Single-Phase AC Circuits & Phasor Analysis 12.3 Balanced & Unbalanced Three-Phase AC Circuits

13 Chapter 13: Electrical Professional — EM Fields & Transients

13.1 Electrostatics, Magnetostatics & Maxwell's Equations 13.2 Electromagnetic Waves & Transmission Line Fields 13.3 First-Order & Second-Order Circuit Transients

14 Chapter 14: Electrical Professional — Electronics, Industrial Electronics & Communications

14.1 Electronics 1 & 2 — Semiconductor Devices & Analog Circuits 14.2 Electrical Apparatus & Devices — Industrial Electronics & Power Converters 14.3 Fundamentals of Electronic Communications

15 Chapter 15: Electrical Professional — Transformers & DC Machines

15.1 Single-Phase & Three-Phase Transformers 15.2 Transformer Connections & Special Transformers 15.3 DC Generators & DC Motors

16 Chapter 16: Electrical Professional — AC Synchronous & Induction Machinery

16.1 Synchronous Generators (Alternators) 16.2 Synchronous Motors & Special AC Machines 16.3 Three-Phase & Single-Phase Induction Motors

17 Chapter 17: Electrical Professional — Power Plants & Energy Conversion

17.1 Hydroelectric, Thermal & Combined Cycle Power Plants 17.2 Renewable Energy Systems & Geothermal Power Plants 17.3 Power Plant Economics, Load Curves & Energy Conversion

18 Chapter 18: Electrical Professional — Transmission & Distribution

18.1 Transmission Line Parameters & Performance Models 18.2 Mechanical Overhead Line Design, Underground Cables & Insulators 18.3 Distribution Systems, Substation Layouts & Power Flow Control

19 Chapter 19: Electrical Professional — Power System Analysis

19.1 The Per-Unit System, Base Conversion & Impedance Diagrams 19.2 Symmetrical Components & Unbalanced Fault Analysis 19.3 Load Flow, Economic Dispatch & Power System Stability

20 Chapter 20: Electrical Professional — Protection, Control, Instrumentation & Illumination

20.1 Power System Protection & Protective Relaying 20.2 Industrial Motor Control, Logic Circuits & PLC Automation 20.3 Electrical Instrumentation, Transducers & Measurement Systems 20.4 Illumination Engineering, Lighting Design & Photometrics 20.5 Feedback Control Systems & Research Methods

1.3 Code of Ethics & Professional Practice for Electrical Engineers

Key Takeaways Explain This Topic AI

The code in force is the Revised Code of Ethics for Licensed Electrical Engineering Practitioners, Annex A of PRB of Electrical Engineering Resolution No. 65 (s. 2024), which repealed Board Resolution No. 08 (s. 2011) and binds PEEs, REEs and RMEs alike.

An electrical engineer's paramount obligation is the safety, health, and welfare of the general public in the performance of all professional duties.

Electrical engineers are strictly prohibited from accepting financial compensation or commissions from more than one party on the same project without full written disclosure and consent.

Official professional seals for Professional Electrical Engineers (PEEs) must strictly conform to BEE specifications, featuring a 40 mm outer diameter, registrant name, and license number.

Signing or sealing electrical plans not prepared by or executed under the direct personal supervision of the PEE constitutes illegal practice and grounds for license revocation.

Last updated: August 2026

  • 1.3 Code of Ethics & Professional Practice for Electrical Engineers
  • Legislative Origin & Fundamental Canons of Electrical Ethics

Professional ethics in electrical engineering is not merely a set of discretionary guidelines; it is a statutory obligation enforced by the PRC Board of Electrical Engineering, and Section 29 of RA 7920 makes violation of the Code of Professional Ethics a ground for suspension or revocation of a certificate of registration.

Use the current code. The instrument in force is the Revised Code of Ethics for Licensed Electrical Engineering Practitioners , issued as Annex "A" of Professional Regulatory Board of Electrical Engineering Resolution No. 65, series of 2024 , which repealed Board Resolution No. 08 (s. 2011) . It applies to all three cadres — PEE, REE and RME — and reviewers that still reproduce the older code are out of date. The revision added explicit provisions on social media conduct, environmental sustainability, inclusivity, intellectual property, plagiarism and the global impact of engineering work that did not appear in the earlier text.

Structure of the Revised Code (Resolution No. 65, s. 2024)

  • Article Title Governs
  • Article I Professional Life The practitioner's duty to the public and to the profession
  • Article II Relation with Client and Employer Fidelity, confidentiality, conflicts of interest
  • Article III Relation with Fellow Engineers Collegiality, credit, fair competition

Article IV Penal Provisions Violation is unethical, unprofessional and dishonourable conduct subject to Board disciplinary action

Memorise this ordering. Under the revised code the public-welfare duty sits in Article I , not in a later article, and the client-and-employer duties are in Article II.

Because electrical energy possesses extreme potential for severe harm—including electrocution, arc flash blasts, electrical fires, and catastrophic grid collapse—the practice of electrical engineering carries profound public safety responsibilities. The fundamental canon governing the profession dictates that technical competence must always be paired with uncompromising ethical integrity .

Mandatory Duties and Responsibilities to the Public

Article I of the Revised Code, "Professional Life" , defines the engineer's paramount duty to the public. Section 6 of that Article requires the practitioner to "always have due regard for the safety of the life and health of his/her employees, other workers, as well as of the public, and for the protection of property that may be affected by the work under his/her responsibility." In all professional activities, public safety, human health and welfare supersede commercial interests, client demands or personal financial gain.

Key Public Safety Directives

Paramount Obligation to Life and Safety : Electrical engineers shall hold paramount the safety, health, and welfare of the public. They must ensure that all electrical designs, construction installations, and operating procedures strictly comply with the Philippine Electrical Code (PEC Parts 1 & 2) and national environmental safety laws.

Action When Judgment is Overruled : If an electrical engineer's professional judgment is overruled by a client, building owner, or executive supervisor under circumstances that endanger life, health, or public safety, the engineer has an explicit mandatory duty to:

  • Express formal written objection to the client or supervisor detailing the exact technical safety violation;
  • Notify the proper public regulatory authorities (e.g., Office of the Building Official, PRC, or BEE);

Refuse to sign, seal, or approve the non-compliant plans or installations, and withdraw from further professional engagement on the compromised portion of the project.

Truthful Public Statements : Electrical engineers shall issue public statements, technical reports, or expert testimonies only in an objective, truthful manner, relying strictly on verified engineering data and scientific principles.

Ethical Obligations to Clients and Employers

Article II of the Revised Code, "Relation with Client and Employer" , details the professional relationship between the electrical engineer and the client or employer. Section 1 requires the practitioner to be "fair, impartial, and reasonable" in rendering service, and Section 7 forbids divulging confidential matters without consent. The engineer is bound to act as a faithful agent or trustee , and the revised code adds express duties on non-disclosure agreements, plagiarism, honest advertising and disclosure of conflicts of interest.

Key Client-Employer Ethical Rules

Confidentiality & Trade Secrets : Engineers shall strictly preserve the confidentiality of commercial secrets, proprietary process designs, and technical data acquired during their employment or professional engagement, even after the professional relationship has terminated.

Conflict of Interest Disclosure : Engineers must promptly disclose in writing to their clients or employers any financial interest, business connection, or affiliation that could potentially bias or influence their technical judgment.

Prohibition of Dual Compensation & Kickbacks :

Engineers shall not accept financial compensation, fee splits, or commissions from more than one party for services rendered on the same project, unless full written disclosure is made to all interested parties and explicit written consent is secured from each.

Engineers are strictly forbidden from soliciting or accepting gratuities, rebates, allowances, or kickbacks directly or indirectly from equipment manufacturers, material suppliers, or installation contractors in exchange for specifying their products.

Professional Conduct Toward Colleagues & Peer Relations

Article III of the Revised Code, "Relation with Fellow Engineers" , establishes guidelines for professional collegiality, fair competition and peer dignity. Its Section 5 specifically forbids competing with another engineer by underbidding after the results of a public bidding are announced , and the revised code adds duties of inclusivity, fair treatment of colleagues, environmental responsibility and the reporting of unethical conduct:

Dignity of the Profession : Engineers shall uphold the dignity, honor, and reputation of the electrical engineering profession, refraining from self-laudatory advertising or false claims.

Fair Professional Competition : Engineers shall not attempt to supplant another engineer after definite steps have been taken toward employment, nor shall they engage in predatory fee cutting intended to undercut a colleague.

Protection of Professional Reputation : Engineers shall not falsely or maliciously injure, directly or indirectly, the professional reputation, prospects, or practice of another engineer.

Proper Attribution & Plagiarism : Engineers shall not take credit for the engineering work, software code, circuit designs, or research generated by peers or subordinates. Credit must be explicitly assigned to those to whom credit is due.

Mentorship : Engineers have a moral duty to encourage and assist junior engineers and subordinates in their professional development and registration.

  • Official Professional Seals, Signing Protocols & Permit Authority
  • Statutory Basis of the Professional Seal (RA 7920 Section 33)

Pursuant to Section 33 of RA 7920 , every licensed Professional Electrical Engineer (PEE) must obtain an official seal of a design prescribed by the Board. PEE Seal Outer Diameter = 40 mm , Statutory Civil Liability Period (Civil Code Art. 1723) = 15 years \text{PEE Seal Outer Diameter} = 40\text{ mm}, \quad \text{Statutory Civil Liability Period (Civil Code Art. 1723)} = 15\text{ years} PEE Seal Outer Diameter = 40 mm , Statutory Civil Liability Period (Civil Code Art. 1723) = 15 years PEE OFFICIAL DRY / WET SEAL FORMAT

  • ┌─────────────────────────┐
  • │ OFFICIAL PEE SEAL │
  • │ Outer Dia: 40 mm │
  • │ │
  • │ NAME OF REGISTRANT │
  • │ REGISTRATION NO. XXXX │
  • │ │
  • │ PROFESSIONAL ELECTRICAL│
  • │ ENGINEER │
  • │ PHILIPPINES │
  • └─────────────────────────┘
  • Specifications & Legal Meaning of the Seal

Physical Dimensions : Circular design with a 40 mm outer diameter . The space between the outer and inner concentric circles contains the text "PROFESSIONAL ELECTRICAL ENGINEER" at the top and "PHILIPPINES" at the bottom. The inner circle contains the registrant's full name and license registration number.

Legal Significance : Stamping an electrical plan, specification, single-line diagram, or report with the PEE dry/wet seal and signature signifies that the document was personally prepared by the PEE or executed under their direct, personal engineering supervision .

Strict Prohibition Against "Sealing-for-Hire" : Signing or dry-sealing plans prepared by unauthorized individuals (unlicensed draftsmen, contractors, or building owners) without direct supervision and personal design control is illegal. Known colloquially as "sealing-for-hire" or "stamping," this practice constitutes gross unethical conduct and illegal practice under RA 7920.

  • Legal Liability, Civil Code Article 1723 & License Revocation Procedures
  • Ground for License Revocation (RA 7920 Section 29)

The Board of Electrical Engineering possesses statutory authority to suspend or revoke a practitioner's Certificate of Registration and Professional ID Card upon any of the following grounds:

  • Conviction of any criminal offense involving moral turpitude;
  • Gross incompetence, malpractice, or severe negligence in the performance of professional duties;
  • Unprofessional or unethical conduct violating the Revised Code of Ethics (PRB Resolution No. 65, s. 2024);
  • Fraud, misrepresentation, or deceit in obtaining a license certificate;

Permitting an unlicensed person to use one's professional seal or license card.

Civil Liability under Civil Code Article 1723

In addition to administrative penalties imposed by the PRC, engineers who sign and seal electrical designs carry severe civil liability under Article 1723 of the Civil Code of the Philippines :

Civil Code Article 1723 (Statutory Presumption of Liability): The engineer or architect who drew up the plans and specifications for a building or structure is liable for damages if within fifteen (15) years from the completion of the structure, the same should collapse or suffer major structural failure on account of defects in the plans and specifications, or due to defects in the ground.

In electrical engineering practice, if a building fire, high-voltage explosion, or fatal electrocution is traced by forensic investigation to fundamental errors in electrical protection calculations, conductor sizing, or grounding plans signed by a PEE, the engineer faces 15-year joint civil liability alongside the contractor.

Loading diagram... Ethical Decision Framework & Sealing Protocol for Electrical Engineers