Study guide
1.2 Republic Act No. 7920 (New Electrical Engineering Law) & License Classes
PRC Registered Electrical Engineer REE
Track your progress as you read
Finished sections get a check mark.
1 Chapter 1: Overview, RA 7920 & Electrical Engineering Ethics
1.1 PRC Board of Electrical Engineering & REE Examination Overview 1.2 Republic Act No. 7920 (New Electrical Engineering Law) & License Classes 1.3 Code of Ethics & Professional Practice for Electrical Engineers
2 Chapter 2: Math — Algebra, Trig & Geometry
2.1 Algebraic Equations, Polynomials & Complex Numbers 2.2 Trigonometry — Identities, Triangles & Spherical Trig 2.3 Analytic & Solid Geometry
3 Chapter 3: Engineering Mathematics — Calculus & Differential Equations
3.1 Differential Calculus, Limits, Derivatives & Applications 3.2 Integral Calculus, Integration Techniques & Area/Volume Applications 3.3 Ordinary Differential Equations & Initial-Value Problems
4 Chapter 4: Engineering Mathematics — Advanced Math & Transform Methods
4.1 Laplace Transforms, Inverse Transforms & Circuit Applications 4.2 Fourier Series, Fourier Transforms & Frequency-Domain Analysis 4.3 Vector Analysis, Linear Algebra, Matrices & Complex Analysis
5 Chapter 5: Engineering Mathematics — Probability, Statistics & Engineering Data Analysis
5.1 Probability Theory, Counting Techniques & Bayes' Theorem 5.2 Engineering Data Analysis I — Descriptive Statistics & Probability Distributions 5.3 Engineering Data Analysis II — Confidence Intervals, Hypothesis Testing & Regression
6 Chapter 6: Engineering Mathematics — Numerical Methods & Analysis
6.1 Numerical Root-Finding & Solution of Linear Systems 6.2 Interpolation, Numerical Integration & Numerical Solution of ODEs
7 Chapter 7: ESAS — Physics, Chemistry & Computer Fundamentals
7.1 Physics for Engineers 7.2 General Chemistry & Materials Science 7.3 Computer Fundamentals, Programming & Data Logic 7.4 Logic Circuits, Switching Theory & Microprocessor Systems
8 Chapter 8: ESAS — Mechanics & Thermal-Fluid Engineering
8.1 Engineering Mechanics — Statics & Dynamics 8.2 Strength of Materials & Mechanics of Deformable Bodies 8.3 Thermal-Fluid Engineering — Thermodynamics & Fluid Mechanics
9 Chapter 9: ESAS — Engineering Economics, Management & Contracts
9.1 Engineering Economics & Depreciation 9.2 Engineering Management & Ethics 9.3 Philippine Electrical Engineering Law, Code & Contracts 9.4 Technopreneurship 101 & Management of Engineering Projects
10 Chapter 10: PEC 1 — Safety, Sizing & Protection
10.1 PEC Fundamentals, Safety Standards & Grounding/Bonding 10.2 Conductor Sizing, Ampacity Adjustment & Voltage Drop 10.3 Overcurrent Protection, Branch Circuit & Feeder Sizing 10.4 Basic Occupational Safety & Health (BOSH) and Electrical Safety Standards
11 Chapter 11: PEC 1 & 2 — Equipment & Utility Systems
11.1 PEC Equipment Installation & Wiring Methods 11.2 Utility Systems, Transformers & Switchgear 11.3 Special Occupancies & Hazardous Locations
12 Chapter 12: Electrical Professional — DC & AC Circuit Fundamentals
12.1 DC Circuit Analysis & Network Theorems 12.2 Single-Phase AC Circuits & Phasor Analysis 12.3 Balanced & Unbalanced Three-Phase AC Circuits
13 Chapter 13: Electrical Professional — EM Fields & Transients
13.1 Electrostatics, Magnetostatics & Maxwell's Equations 13.2 Electromagnetic Waves & Transmission Line Fields 13.3 First-Order & Second-Order Circuit Transients
14 Chapter 14: Electrical Professional — Electronics, Industrial Electronics & Communications
14.1 Electronics 1 & 2 — Semiconductor Devices & Analog Circuits 14.2 Electrical Apparatus & Devices — Industrial Electronics & Power Converters 14.3 Fundamentals of Electronic Communications
15 Chapter 15: Electrical Professional — Transformers & DC Machines
15.1 Single-Phase & Three-Phase Transformers 15.2 Transformer Connections & Special Transformers 15.3 DC Generators & DC Motors
16 Chapter 16: Electrical Professional — AC Synchronous & Induction Machinery
16.1 Synchronous Generators (Alternators) 16.2 Synchronous Motors & Special AC Machines 16.3 Three-Phase & Single-Phase Induction Motors
17 Chapter 17: Electrical Professional — Power Plants & Energy Conversion
17.1 Hydroelectric, Thermal & Combined Cycle Power Plants 17.2 Renewable Energy Systems & Geothermal Power Plants 17.3 Power Plant Economics, Load Curves & Energy Conversion
18 Chapter 18: Electrical Professional — Transmission & Distribution
18.1 Transmission Line Parameters & Performance Models 18.2 Mechanical Overhead Line Design, Underground Cables & Insulators 18.3 Distribution Systems, Substation Layouts & Power Flow Control
19 Chapter 19: Electrical Professional — Power System Analysis
19.1 The Per-Unit System, Base Conversion & Impedance Diagrams 19.2 Symmetrical Components & Unbalanced Fault Analysis 19.3 Load Flow, Economic Dispatch & Power System Stability
20 Chapter 20: Electrical Professional — Protection, Control, Instrumentation & Illumination
20.1 Power System Protection & Protective Relaying 20.2 Industrial Motor Control, Logic Circuits & PLC Automation 20.3 Electrical Instrumentation, Transducers & Measurement Systems 20.4 Illumination Engineering, Lighting Design & Photometrics 20.5 Feedback Control Systems & Research Methods
1.2 Republic Act No. 7920 (New Electrical Engineering Law) & License Classes
Key Takeaways Explain This Topic AI
Republic Act No. 7920 was approved on February 24, 1995; its Section 43 repealed Republic Act No. 184, the Old Electrical Engineering Law of 1947, and Section 45 set effectivity at 30 days after full publication.
The Board of Electrical Engineering consists of a Chairman and two Members appointed by the President from recommendees of the PRC Commissioner, chosen from nominees of the Institute of Integrated Electrical Engineers of the Philippines (IIEE), the accredited integrated professional organization.
Qualifications for PEE registration require a valid REE license, at least 4 years of active practice, three certificates of good moral character, and successful defense of a technical engineering report.
RA 7920 Section 40 is the Penalty Clause: violation carries a fine of ₱10,000 to ₱50,000, imprisonment of 6 months to 5 years, or both. Section 32 lists the prohibited acts and Section 36 separately requires certificates to be posted conspicuously.
Compliance with Continuing Professional Development (CPD) pursuant to RA 10912 is mandatory for professional identification card renewal every 3 years.
Last updated: August 2026
- 1.2 Republic Act No. 7920 (New Electrical Engineering Law) & License Classes
- Legislative History, Enactment & Statutory Scope
Republic Act No. 7920 , officially titled "An Act Providing for a More Responsive and Comprehensive Regulation for the Practice, Licensing, and Registration of Electrical Engineers and Master Electricians," was approved on February 24, 1995 . Under its Section 45 (Effectivity Clause) the Act took effect thirty (30) days after its full publication in the Official Gazette or a newspaper of general circulation. Its Section 43 (Repealing Clause) repealed Republic Act No. 184 , the Old Electrical Engineering Law of 1947, together with local ordinances on the examination of electrical contractors, inspectors and electricians.
The legislative intent behind RA 7920 was to modernize the legal framework governing electrical practice in response to rapid technological expansion, industrialization, high-voltage utility grids, and complex power system architecture in the Philippines.
Under Section 2 (Practice of Electrical Engineering) , the statutory scope of practice encompasses professional services delivered in connection with electrical plans, design, systems, power plants, substations, transmission lines, distribution networks, industrial facilities, and commercial buildings. These services specifically include:
- Consultation, investigation, valuation, and technical studies;
- Design, preparation of electrical plans, single-line diagrams, and specifications;
- Supervision of erection, installation, construction, testing, and commissioning;
- Operation, maintenance, and troubleshooting of electrical power machinery and systems;
- Teaching of professional electrical engineering subjects in CHED-accredited universities;
Executive administration of electrical engineering departments in industrial or utility enterprises.
Organization, Composition & Powers of the Board of Electrical Engineering (BEE)
The Board of Electrical Engineering (BEE) is the collegial body created under Section 3 (Composition of the Board) of RA 7920 to execute and administer the law under the general supervision and administrative control of the PRC.
Board Composition & Nomination Process
Membership : The Board consists of one (1) Chairman and two (2) Members .
Appointment : Board members are appointed directly by the President of the Philippines .
Nomination Pathway : The Accredited Integrated Professional Organization—the Institute of Integrated Electrical Engineers of the Philippines, Inc. (IIEE) —submits a list of nominees per vacancy to the PRC. The Commissioner selects the recommendees, and the President appoints the Board members from that list (RA 7920 Sec. 3, read with RA 8981 Sec. 7).
Term of Office (Section 6) : Board members serve a term of three (3) years from the date of appointment or until their successors have been appointed and qualified. Section 6 permits reappointment for a second term , so the practical ceiling is two terms.
Statutory Qualifications of Board Members (Section 5)
To qualify for appointment to the BEE, a candidate must meet all of the following statutory criteria:
- Be a natural-born Filipino citizen and a resident of the Philippines for at least five (5) consecutive years;
- Be at least thirty-five (35) years of age ;
- Be of proven integrity and high moral character;
Be a registered Professional Electrical Engineer (PEE) with at least ten (10) years of active practice prior to appointment;
No Academic Conflict : Must not be a faculty member, officer, or executive of any university, college, or institute offering a BSEE course, nor have any financial interest in such institutions for at least three (3) consecutive years prior to appointment.
Powers and Duties of the Board (Section 4)
The BEE exercises regulatory, administrative, quasi-legislative, and quasi-judicial powers, including:
- Promulgating rules and regulations implementing RA 7920;
- Administering licensure examinations for REE and RME candidates;
- Evaluating technical project reports and conducting oral examinations for PEE registration;
Inspecting educational institutions, industrial plants, power stations, and construction sites to verify compliance with RA 7920;
Investigating violations of the law and Code of Ethics, issuing subpoenas, and revoking or suspending professional certificates.
Detailed Statutory Qualifications for Professional Cadres
RA 7920 establishes explicit eligibility thresholds for each of the three professional cadres:
Comparison of Qualification Standards
Parameter Professional Electrical Engineer (PEE) Registered Electrical Engineer (REE) Registered Master Electrician (RME)
- Governing Section RA 7920 Section 16 RA 7920 Section 17 RA 7920 Section 18
- Citizenship Citizen of the Philippines Citizen of the Philippines Citizen of the Philippines
- Minimum Age No minimum age specified (practical min ~25) At least 21 years of age At least 18 years of age
- Moral Character High moral character & integrity Good moral character Good moral character
Educational Attainment Bachelor of Science in Electrical Engineering (BSEE) Bachelor of Science in Electrical Engineering (BSEE) Vocational EE Course (1-3 yrs) or BSEE completion
Required Experience Minimum 4 years of active REE practice under PEE supervision None required for exam admission 1 to 5 years depending on vocational/academic background
Assessment Mode Technical Engineering Report defense before BEE 2-Day Written Examination (Math, ESAS, Prof) 1-Day Written Examination (PEC & Technical)
Field of Practice Boundaries & Signing Authority
RA 7920 strictly delineates the operational boundaries and legal authority granted to each practitioner class:
RME independent work: V ≤ 600 V and S ≤ 500 kVA (RA 7920 Secs. 31 and 33) \text{RME independent work: } V \le 600\text{ V} \ \textbf{and} \ S \le 500\text{ kVA} \quad \text{(RA 7920 Secs. 31 and 33)} RME independent work: V ≤ 600 V and S ≤ 500 kVA (RA 7920 Secs. 31 and 33)
Plan sealing authority: exclusive to the PEE (RA 7920 Secs. 31 and 34) \text{Plan sealing authority: exclusive to the PEE} \quad \text{(RA 7920 Secs. 31 and 34)} Plan sealing authority: exclusive to the PEE (RA 7920 Secs. 31 and 34)
1. Professional Electrical Engineer (PEE)
Authority : Unlimited scope across all electrical systems regardless of voltage ( V V V ), current ( I I I ), or power ( k V A / M W kVA/MW kV A / M W ) rating.
Sole Signing Authority : Section 31 (Field of Practice) gives the PEE "the sole authority to seal electrical plans", and Section 34 makes it unlawful to undertake any installation unless the plans, designs, valuations and specifications have been prepared by or under the responsible charge of, and signed and sealed by, a professional electrical engineer. This covers layout drawings, technical specifications, single-line diagrams and the permit documents required by building officials and electric utilities.
2. Registered Electrical Engineer (REE)
Authority : Under Section 31 , an REE may take charge of or supervise the operation and maintenance of electrical equipment in power plants, industrial plants, watercraft and electric locomotives; the manufacture and repair of electrical supply and utilization equipment; the teaching of electrical subjects; and the sale and distribution of equipment requiring engineering calculations. Section 33 names the PEE and the REE interchangeably for installations of any capacity and any standard voltage , so RA 7920 imposes no kilovolt ceiling on REE practice.
Sign-off Limitations : REEs are not authorized by law to sign and seal official electrical plans or drawings for building permit approval. Plan signing remains the exclusive statutory privilege of PEEs.
3. Registered Master Electrician (RME)
Authority : Authorized to execute wiring installations, maintenance, troubleshooting, and direct operation of electrical machinery and systems.
System Limits : An RME may work independently up to 600 volts and 500 kVA . Section 31 provides that where the installation or machinery is rated in excess of 500 kVA or in excess of 600 V , the work must be carried out under the supervision of a professional electrical engineer or a registered electrical engineer.
Enforcement, Illegal Practice & Statutory Penal Provisions
Two provisions work together here. Section 32 (Prohibitions in the Practice of Electrical Engineering) enumerates the prohibited acts, and Section 40 (Penalty Clause) sets the sanction. (Section 36 is a different provision entirely — it requires certificates of registration to be posted conspicuously in the plant or establishment, and is itself an examinable detail.) Fine Statutory Bounds: 10 , 000 ≤ Fine (PHP) ≤ 50 , 000 , Imprisonment: 6 months ≤ t ≤ 5 years \text{Fine Statutory Bounds: } 10,000 \le \text{Fine (PHP)} \le 50,000, \quad \text{Imprisonment: } 6\text{ months} \le t \le 5\text{ years} Fine Statutory Bounds: 10 , 000 ≤ Fine (PHP) ≤ 50 , 000 , Imprisonment: 6 months ≤ t ≤ 5 years
Prohibited Acts (Illegal Practice)
Practicing or attempting to practice electrical engineering or master electrician work without a valid Certificate of Registration and Professional Identification Card;
Signing or sealing electrical plans, drawings, or specifications by any practitioner other than a licensed PEE;
- Using or attempting to use the license certificate or seal of another practitioner;
- Giving false or forged evidence to the Board to obtain professional registration;
Employing or contracting unlicensed individuals to perform regulated electrical services.
Statutory Penalties (Section 40)
Penalty Clause (RA 7920 Section 40): Any person who shall violate any of the provisions of this Act shall be guilty of a misdemeanor and shall, upon conviction, be sentenced to a fine of not less than Ten Thousand Pesos (₱10,000.00) nor more than Fifty Thousand Pesos (₱50,000.00) , or imprisonment for a period of not less than six (6) months nor more than five (5) years , or both, at the discretion of the court.
- Continuing Professional Development (CPD) & Integrated Professional Organization (IIEE)
- Continuing Professional Development (RA 10912)
Pursuant to Republic Act No. 10912 (the Continuing Professional Development Act of 2016 ), all licensed REEs and PEEs must accumulate mandatory CPD Credit Units during each 3-year compliance period to renew their PRC Professional Identification Card (PIC). CPD credits are earned through technical seminars, national conventions, post-graduate studies, research publications, and professional training certified by the PRC CPD Council.
Accredited Integrated Professional Organization (AIPO)
All registered electrical practitioners are integrated into one national organization: the Institute of Integrated Electrical Engineers of the Philippines, Inc. (IIEE) . Recognized as the sole Accredited Integrated Professional Organization (AIPO) for electrical practitioners, IIEE represents the profession in international bodies, nominates BEE board members, and administers CPD programs nationwide. (Take care with the word order of the name — Institute of Integrated Electrical Engineers , not the reverse.)