Study guide
1.1 PRC ECE Licensure Exam Overview & Regulation
PRC Electronics Engineering Licensure Examination Study Guide Exam
Track your progress as you read
Finished sections get a check mark.
1 Chapter 1: Introduction & Board Exam Strategy
1.1 PRC ECE Licensure Exam Overview & Regulation 1.2 Table of Specifications & Exam Strategy
2 Chapter 2: Mathematics Foundations
2.1 College & Advanced Algebra 2.2 Trigonometry & Solid Mensuration 2.3 Analytic Geometry & Differential Calculus 2.4 Integral Calculus & Applications
3 Chapter 3: Advanced Mathematics for ECE
3.1 Differential Equations & Circuit Transients 3.2 Complex Numbers & Laplace Transforms 3.3 Fourier Series, Fourier Transforms & Z-Transforms 3.4 Vector Analysis, Matrices & Probability
4 Chapter 4: GEAS - Engineering Sciences & Economics
4.1 Engineering Physics & Materials Chemistry 4.2 Engineering Mechanics & Strength of Materials 4.3 Engineering Economics & Financial Analysis 4.4 Computer Fundamentals & C/C++ Programming
5 Chapter 5: GEAS - Management, Materials, Environment & CAD
5.1 Engineering Management & Technopreneurship 101 5.2 Materials Science & Engineering 5.3 Environment Science & Engineering 5.4 Computer-Aided Drawing (CAD) & Engineering Graphics
6 Chapter 6: GEAS - ECE Laws, Ethics & Contracts
6.1 Republic Act No. 9292 (Electronics Engineering Law of 2004) 6.2 ECE Code of Ethics & Professional Conduct 6.3 Contracts, Specifications & National Building Code (PD 1096)
7 Chapter 7: Electronics Engineering - Circuits & Semiconductor Diodes
7.1 DC & AC Circuit Analysis & Network Theorems 7.2 Electromagnetics & Passive Components 7.3 Semiconductor Physics & Diode Circuits 7.4 Power Supply Design & Voltage Regulators
8 Chapter 8: Electronics Engineering - Transistors & Analog Circuits
8.1 BJT Operation, Biasing & Small-Signal Amplifiers 8.2 FET Characteristics, Biasing & Amplifier Circuits 8.3 Multistage Amplifiers, Frequency Response & Power Amplifiers 8.4 Operational Amplifiers & Active Filter Design
9 Chapter 9: Electronics Engineering - Digital Electronics & Control Systems
9.1 Feedback Topologies & Oscillator Circuits 9.2 Boolean Algebra, Logic Gates & Combinational Circuits 9.3 Sequential Logic, Flip-Flops & Microprocessor Architecture 9.4 Industrial Power Electronics & Control System Theory
10 Chapter 10: EST - Communications Fundamentals & Transmission Lines
10.1 Signal Fundamentals, Decibel Calculations & Noise Analysis 10.2 Amplitude Modulation (AM) Principles & Receivers 10.3 Frequency Modulation (FM), Phase Modulation & Discriminators 10.4 Transmission Line Parameters, SWR & Smith Chart
11 Chapter 11: EST - Digital Communications, Wireless & Optical Systems
11.1 Pulse & Digital Modulation Systems 11.2 Data Communications, OSI Model & Protocols 11.3 Antenna Principles & Electromagnetic Wave Propagation 11.4 Optical Fiber, Microwave, Satellite & Philippine NTC Regulations
1.1 PRC ECE Licensure Exam Overview & Regulation
Key Takeaways Explain This Topic AI
Republic Act No. 9292 (Electronics Engineering Law of 2004) governs the practice of electronics engineering in the Philippines and establishes the Professional Regulatory Board of Electronics Engineering (PRBECE) under the PRC.
To pass the RECE Licensure Examination, candidates must achieve a Weighted General Average (WGA) of at least 70% with no subject score falling below 50%.
RA 9292 defines a three-tier professional hierarchy: Electronics Technician (ECT), Registered Electronics Engineer (RECE), and Professional Electronics Engineer (PECE).
The RECE licensure exam is a two-day objective exam spanning four core technical domains (Mathematics, GEAS, Electronics Engineering, and EST), with roughly 100 multiple-choice items per subject per standard reviewer estimates.
Last updated: July 2026
PRC ECE Licensure Exam Overview & Regulation
Executive Overview: The Philippine Electronics Engineering Licensure Examination is administered twice annually (in March and October for 2026) by the Professional Regulation Commission (PRC) under the Professional Regulatory Board of Electronics Engineering (PRBECE). Governed by Republic Act No. 9292 ("Electronics Engineering Law of 2004"), the licensure framework regulates professional practice, protects public safety, and ensures technical competence across telecommunications, broadcasting, microelectronics, and industrial automation.
Legislative Framework: Republic Act No. 9292
Republic Act No. 9292 was signed into law on April 17, 2004 , repealing the obsolete RA 5734 (the original Electronics and Communications Engineering Act of 1969). RA 9292 modernized the scope of practice to reflect rapid technological convergence in information and communications technology (ICT), computer systems, robotics, biomedical electronics, and semiconductor manufacturing.
The law establishes the Professional Regulatory Board of Electronics Engineering (PRBECE) , composed of a Chairman and two Board Members appointed by the President of the Philippines. PRBECE operates under the administrative supervision of the PRC and works closely with the Institute of Electronics Engineers of the Philippines, Inc. (IECEP) , the sole PRC-accredited integrated professional organization (APO) for electronics engineers.
Statutory Scope of Professional Practice
Under Section 5 of RA 9292, the practice of electronics engineering encompasses:
Consultative, design, specification, and feasibility studies for electronic devices, circuits, and systems.
Supervised construction, installation, operation, testing, and maintenance of telecommunications networks, broadcasting stations, and industrial control systems.
Research, development, and academic instruction in electronics and communications subjects.
Technical management and quality assurance in microelectronics, manufacturing, and signal processing facilities.
The Three-Tier Professional Hierarchy under RA 9292
RA 9292 establishes three distinct categories of practice, creating a structured career progression from technical operations to master design authority.
Category / Qualification Abbreviation Statutory Requirements Scope of Work & Authority
Electronics Technician ECT Must pass the ECT Board Exam (or complete 2-year vocational/technical course or 3 years of BS ECE curriculum). Installation, operation, testing, troubleshooting, and routine maintenance of electronic equipment and systems under RECE/PECE supervision.
Registered Electronics Engineer RECE Must hold a BS ECE degree from a recognized institution and pass the RECE Board Examination. Engineering management, system integration, operation, maintenance, and technical supervision. Cannot sign/seal major engineering plans independently.
Professional Electronics Engineer PECE Must be an RECE with at least 7 years of active professional practice, submit executive portfolio/technical papers, and pass PRBECE oral evaluation. Sole authority to sign and seal electronics plans, specifications, drawings, and technical documents required for building permits and regulatory filings.
Board Examination Logistics & Administration
The RECE Licensure Examination is conducted over two consecutive days at PRC testing centers nationwide (including Manila, Baguio, Cebu, Davao, Cagayan de Oro, and Iloilo).
Timetable & Session Breakdown
The RECE Licensure Examination is conducted over two consecutive days, with one subject examined per half-day session at PRC testing centers nationwide (including Manila, Baguio, Cebu, Davao, Cagayan de Oro, and Iloilo). The exact per-session clock times are set by PRC in each examination's General Instructions and are not fixed in law.
- Day Session Subject Area Weight Typical Item Count*
- Day 1 Morning Mathematics 20% ~100 items
- Day 1 Afternoon General Engineering & Applied Sciences (GEAS) 20% ~100 items
- Day 2 Morning Electronics Engineering 30% ~100 items
- Day 2 Afternoon Electronics Systems & Technologies (EST) 30% ~100 items
*The PRC does not publish a single fixed total item count in RA 9292; the ~100-items-per-subject figure is the standard estimate used across PRC reviewer sources and reflects the exam's one-subject-per-half-day, two-day schedule. Treat it as a planning estimate, not an official constant.
Each subject session consists of objective multiple-choice items answered on PRC scannable answer sheets. Because the exact per-subject item count and session length are not officially fixed, candidates should train to work steadily through roughly 100 items within a half-day sitting rather than memorize a single per-item time budget.
Eligibility Criteria & Application Requirements
To sit for the RECE Licensure Examination, candidates must fulfill PRC statutory eligibility requirements prior to filing:
Citizenship: Citizen of the Philippines, or a foreign citizen whose country grants reciprocity to Filipino electronics engineers under Section 33 of RA 9292.
Education: Holder of a Bachelor of Science in Electronics Engineering (BS ECE) degree conferred by a college, institute, or university recognized by the Commission on Higher Education (CHED).
Moral Character: Good moral character with no prior conviction by a court of competent jurisdiction of any offense involving moral turpitude.
Mandatory Documentation: Official Transcript of Records (TOR) with Special Order (SO) number, PSA Birth Certificate, PSA Marriage Certificate (for married female applicants), NBI Clearance, and two documentary stamps.
Passing Criteria, Removal Exams, and License Maintenance
The grading mechanism of the ECE Board Exam strictly evaluates overall proficiency while preventing severe subject deficiency:
Full Pass: A candidate achieves a Weighted General Average (WGA) of 70% or higher , provided no individual subject score falls below 50% .
Conditional Status (Removal Exam): If a candidate obtains a WGA of 70% or higher but receives a grade below 50% in only one subject , the candidate is deferred with a conditional pass. The candidate must take a removal examination in that failed subject within two (2) years . Passing the removal exam awards full licensure.
Fail: Obtaining a WGA below 70%, OR scoring below 50% in two or more subjects, results in a failing mark, requiring a complete retake of all four subjects in a subsequent board examination.
Post-Licensure Renewal & CPD Requirements
Upon passing, successful examinees take the Oath of Professional before the Board or PRC officials. The PRC issues a Certificate of Registration and a Professional Identification Card (PIC) valid for three (3) years . Renewal of the PIC requires compliance with Republic Act No. 10912 (Continuing Professional Development Act of 2016), requiring 15 CPD credit units per 3-year renewal cycle, earned through accredited technical seminars, research publications, advanced degrees, or IECEP national conventions.