Study guide

7.3 Mineral and Mining Surveys, Hydrographic Surveying, Route Alignment, and Construction Layout

PRC Geodetic Engineering Licensure Examination Exam

Track your progress as you read

Finished sections get a check mark.

1 Chapter 1: Laws, Professional Practice, and Code of Ethics

1.1 Republic Act 8560 & RA 9200 (Philippine Geodetic Engineering Act) and PRC Board Rules 1.2 Code of Ethics for Geodetic Engineers, Professional Responsibilities & Practice Limits 1.3 PRC Licensure Examination Rules, Continuing Professional Development (CPD), and Legal Penalties

2 Chapter 2: Property, Land Registration, and Natural Resources Laws

2.1 Presidential Decree 1529 (Property Registration Decree) & The Torrens System 2.2 Commonwealth Act 141 (Public Land Act), Land Classification, and Public Land Patents 2.3 Comprehensive Agrarian Reform Law (RA 6657) & Environmental/Forestry/Mining Laws (RA 7942, PD 705) 2.4 Civil Code Provisions on Ownership, Property Boundaries, Easements, Obligations, and Contracts 2.5 DENR Administrative Order DAO 2007-29 (Revised Regulations for Land Surveys) & Technical Standards

3 Chapter 3: Mathematics, Geometry, and Trigonometry

3.1 Advanced Algebra, Analytic Geometry, and Solid Geometry in Geodetic Calculations 3.2 Plane and Spherical Trigonometry for Surveying and Astronomical Applications 3.3 Differential and Integral Calculus Applied to Curves, Surfaces, and Surveying Computations

4 Chapter 4: Engineering Sciences, Mechanics, and Economics

4.1 Engineering Mechanics (Statics, Kinematics, Dynamics) for Engineering Applications 4.2 Engineering Economics, Time Value of Money, Cash Flows, Depreciation, and Capital Costing

5 Chapter 5: Theory of Errors and Adjustment of Observations

5.1 Theory of Errors, Precision vs. Accuracy, Random/Systematic Errors, and Error Propagation 5.2 Principles of Least Squares, Most Probable Value, and Weighted Observations 5.3 Least-Squares Adjustment of Level Nets, Triangulation, and Plane Traverses

6 Chapter 6: Plane & Distance/Angle Surveying Fundamentals

6.1 Distance Measurement Methods, Taping Corrections (Temperature, Tension, Sag), and EDM Operations 6.2 Angular Measurements, Transit/Theodolite/Total Station Operations, Bearings, Azimuths, and Magnetic Declination 6.3 Differential, Trigonometric, Barometric, and Profile Leveling Methods

7 Chapter 7: Cadastral, Property, and Special Surveys

7.1 Traverse Computations, Latitudes, Departures, Error of Closure, and Transit/Compass Rule Adjustments 7.2 Area Computations (DMD, DPD, Coordinates) and Subdivision/Consolidation Survey Standards 7.3 Mineral and Mining Surveys, Hydrographic Surveying, Route Alignment, and Construction Layout

8 Chapter 8: Geodetic Surveying and Reference Datums

8.1 Ellipsoids, Geoid Undulation, Geodetic Datums, and the Philippine Reference System of 1992 (PRS92) 8.2 Geodetic Position Computations: Direct and Inverse Problems on the Reference Ellipsoid 8.3 Triangulation, Trilateration, Baseline Measurements, and National Geodetic Control Networks

9 Chapter 9: Geodetic Astronomy and Satellite Positioning (GNSS)

9.1 Celestial Sphere, Equatorial/Horizon Coordinate Systems, and Astronomical Time Systems (UT, ST, LMT) 9.2 Determination of Latitude, Longitude, and Solar/Polaris Azimuth by Astronomical Observations 9.3 Global Navigation Satellite Systems (GNSS/GPS), Carrier-Phase Positioning, RTK, and Static Baselines

10 Chapter 10: Cartography, Map Projections, and Coordinate Systems

10.1 Cartographic Principles, Map Scales, Map Symbolization, and Cartographic Generalization 10.2 Map Projections: Universal Transverse Mercator (UTM) and Philippine Transverse Mercator (PTM) Grid Systems 10.3 Survey Plan Preparation, Technical Description Formatting, and DENR Approval Workflows

11 Chapter 11: Photogrammetry, Remote Sensing, and Geographic Information Systems (GIS)

11.1 Aerial Photogrammetry, Photographic Scale, Relief Displacement, Flight Planning, and Stereoscopy 11.2 Digital Photogrammetry, UAV/Drone Surveying, Orthophoto Generation, and LiDAR Data Processing 11.3 Remote Sensing Spectral Signatures, Multispectral Image Classification, and GIS Spatial Analysis

7.3 Mineral and Mining Surveys, Hydrographic Surveying, Route Alignment, and Construction Layout

Key Takeaways Explain This Topic AI

Under RA 7942, mineral land administration in the Philippines uses meridional blocks measuring 30 seconds latitude by 30 seconds longitude (approx. 81 hectares).

Mean Lower Low Water (MLLW) is the standard vertical hydrographic datum for nautical charts and sounding reduction in the Philippines.

Simple circular horizontal curve elements include Tangent T = R tan(I/2), Length L = R I_rad, and Long Chord LC = 2 R sin(I/2).

Vertical equal-tangent parabolic curves connect gradients g1 and g2, with summit/low point location given by x = -g1 / r.

Last updated: July 2026

7.3 Mineral and Mining Surveys, Hydrographic Surveying, Route Alignment, and Construction Layout

Geodetic Engineers in the Philippines are authorized under Republic Act 8560 (as amended by RA 9200) to conduct specialized engineering surveys, including mineral land location surveys, hydrographic mapping, route curve alignments, and high-precision construction layouts. This section covers statutory requirements, geometric derivations, and field procedures across these technical domains.

Mineral and Mining Surveys (RA 7942 - Philippine Mining Act)

Mineral land surveys establish legal boundaries for mining claims, exploration permits, and mineral agreements under Republic Act No. 7942 (Philippine Mining Act of 1995) and DENR Administrative Order No. 2010-21.

1. The Meridional Block System

Under RA 7942, mineral land administration in the Philippines uses a standardized global grid called the Meridional Block System :

Block Size : Exactly 30 seconds ( 30 ′ ′ 30'' 3 0 ′′ ) of latitude by 30 seconds ( 30 ′ ′ 30'' 3 0 ′′ ) of longitude .

Area per Block : Approximately 81 hectares (varies slightly depending on latitude).

Boundaries : Bounded by geographic meridians and parallels conforming to the Philippine Reference System of 1992 (PRS92) / PTM grid projection.

2. Lode vs. Placer Mining Claims

Feature Lode Claim Placer Claim

Deposit Type Veins, lodes, ledges, or rock-in-place mineral deposits Alluvial, placer, loose gravel/sand, or detrital deposits

  • Shape & Size Rectangular block bounded by parallel end-lines Gridded meridional blocks or fractions thereof
  • Max Area (Individual) 81 hectares (1 meridional block) per claim 81 hectares (1 meridional block) per claim
  • Max Area (Corporation) Up to 8,100 hectares (100 blocks) onshore Up to 16,200 hectares (200 blocks) offshore
  • 3. Underground Surveying Techniques

Underground mining operations require transferring surface coordinates and azimuths down vertical shafts to mine drifts and stopes:

Shaft Plumbing (Shaft Connection Survey) : Heavy plumb bobs (15-50 kg) suspended on steel piano wire inside viscous oil containers (to damp oscillations) transfer surface coordinates down vertical shafts. Alternatively, high-precision optical zenith/nadir plummets or gyro-theodolites are used.

Underground Traverse : Roof spads (expansion plugs with brass eyelets set in the mine ceiling) serve as traverse stations to prevent disturbance by heavy mining equipment. Mining transits equipped with illuminated targets and side telescopes (to clear steep sight lines) are standard.

Hydrographic Surveying and Marine Datums

Hydrographic surveys map underwater topography (bathymetry), measure water depths (sounding), and establish tidal datums for navigation, port engineering, and coastal zone management.

1. Hydrographic Vertical Datums

Vertical references in marine environments differ significantly from topographic land survey datums:

Mean Lower Low Water (MLLW) : The average of the lower low water height of each tidal day observed over a 19-year National Tidal Datum Epoch. In the Philippines, MLLW is the standard reference datum for hydrographic soundings and nautical charts published by NAMRIA (National Mapping and Resource Information Authority).

Mean Sea Level (MSL) : The average height of the sea surface for all stages of the tide over a 19-year epoch. Used as the zero datum for topographic elevations and geodetic leveling networks.

2. Sounding Reduction Formula

Water depth measured by an echo sounder or lead line at time t t t must be reduced to the chart datum (MLLW): h chart = h measured − Δ h transducer + ( Z 0 − h tide ) h_{\text{chart}} = h_{\text{measured}} - \Delta h_{\text{transducer}} + (Z_0 - h_{\text{tide}}) h chart ​ = h measured ​ − Δ h transducer ​ + ( Z 0 ​ − h tide ​ )

Where:

  • h measured h_{\text{measured}} h measured ​ = Raw depth measured from acoustic transducer or water surface
  • Z 0 Z_0 Z 0 ​ = Height of tide station benchmark above MLLW datum
  • h tide h_{\text{tide}} h tide ​ = Observed tide gauge height at the time of sounding
  • 3. Hydrographic Positioning Methods

Historical / Optical : Two-sextant resection observing three known onshore signals (solving the classic Three-Point Problem / Kaestner method).

Modern / Electronic : Real-Time Kinematic GNSS (RTK-GNSS) or Differential GPS (DGPS) integrated with Single-Beam (SBES) or Multi-Beam Echo Sounders (MBES).

Route Surveying and Geometric Alignments

Route surveying deals with the design and layout of transportation corridors (highways, railways, pipelines, canals).

1. Horizontal Curves

Horizontal alignments connect straight tangent sections using circular and transition curves:

A. Simple Circular Curve Elements Tangent Distance: T = R tan ⁡ ( I 2 ) \text{Tangent Distance: } T = R \tan\left(\frac{I}{2}\right) Tangent Distance: T = R tan ( 2 I ​ ) Length of Curve: L = R ⋅ I r a d = π R I ∘ 180 ∘ \text{Length of Curve: } L = R \cdot I_{rad} = \frac{\pi R I^\circ}{180^\circ} Length of Curve: L = R ⋅ I r a d ​ = 18 0 ∘ π R I ∘ ​ Long Chord: L C = 2 R sin ⁡ ( I 2 ) \text{Long Chord: } LC = 2 R \sin\left(\frac{I}{2}\right) Long Chord: L C = 2 R sin ( 2 I ​ ) External Distance: E = R ( sec ⁡ ( I 2 ) − 1 ) \text{External Distance: } E = R \left( \sec\left(\frac{I}{2}\right) - 1 \right) External Distance: E = R ( sec ( 2 I ​ ) − 1 ) Middle Ordinate: M = R ( 1 − cos ⁡ ( I 2 ) ) \text{Middle Ordinate: } M = R \left( 1 - \cos\left(\frac{I}{2}\right) \right) Middle Ordinate: M = R ( 1 − cos ( 2 I ​ ) )

Where R R R is radius of curve, and I I I is total intersection angle between forward and back tangents.

B. Compound and Reverse Curves

Compound Curve : Consists of two consecutive circular arcs curving in the same direction with different radii ( R 1 ≠ R 2 R_1 \neq R_2 R 1 ​  = R 2 ​ ) meeting at a Point of Compound Curvature (PCC).

Reverse Curve : Consists of two circular arcs curving in opposite directions meeting at a Point of Reverse Curvature (PRC). Caution: Prohibited on high-speed highways due to abrupt change in superelevation.

C. Spiral Transition Curve (Clothoid)

Spiral curves provide a gradual transition from a straight tangent ( R = ∞ R = \infty R = ∞ ) to a circular curve of radius R R R . The radius of curvature decreases linearly with spiral length L s L_s L s ​ : R ⋅ L s = A 2 ( Clothoid constant A ) R \cdot L_s = A^2 \quad (\text{Clothoid constant } A) R ⋅ L s ​ = A 2 ( Clothoid constant A )

Spirals allow smooth introduction of centrifugal acceleration and vehicle superelevation runoff.

2. Vertical Parabolic Curves

Vertical curves connect intersecting gradient lines ( g 1 g_1 g 1 ​ and g 2 g_2 g 2 ​ ) using equal-tangent vertical parabolas:

Rate of Change of Grade ( r r r ) : r = g 2 − g 1 L r = \frac{g_2 - g_1}{L} r = L g 2 ​ − g 1 ​ ​

Elevation ( Y Y Y ) at any distance x x x from the PVC (Point of Vertical Curvature) : Y ( x ) = Y PVC + g 1 x + r 2 x 2 = Y PVC + g 1 x + g 2 − g 1 2 L x 2 Y(x) = Y_{\text{PVC}} + g_1 x + \frac{r}{2} x^2 = Y_{\text{PVC}} + g_1 x + \frac{g_2 - g_1}{2L} x^2 Y ( x ) = Y PVC ​ + g 1 ​ x + 2 r ​ x 2 = Y PVC ​ + g 1 ​ x + 2 L g 2 ​ − g 1 ​ ​ x 2

Location of High / Low Point ( x max x_{\text{max}} x max ​ from PVC) : d Y d x = g 1 + r x = 0 ⟹ x max = − g 1 r = − g 1 L g 2 − g 1 \frac{dY}{dx} = g_1 + r x = 0 \implies x_{\text{max}} = \frac{-g_1}{r} = \frac{-g_1 L}{g_2 - g_1} d x d Y ​ = g 1 ​ + r x = 0 ⟹ x max ​ = r − g 1 ​ ​ = g 2 ​ − g 1 ​ − g 1 ​ L ​

  • Construction Layout and Earthwork Calculations
  • 1. Setting Slope Stakes

Slope stakes mark the exact intersection of a cut or fill side slope with the natural ground surface: d = B 2 + s ⋅ h d = \frac{B}{2} + s \cdot h d = 2 B ​ + s ⋅ h

Where:

  • d d d = Distance from centerline to slope stake
  • B B B = Roadway formation width (roadbed width)
  • s s s = Side slope ratio (horizontal : vertical, e.g., 1.5 : 1)
  • h h h = Depth of cut or height of fill at the stake location
  • 2. Earthwork Volume Calculations

Cross-sectional area of cut/fill at successive stations A 1 A_1 A 1 ​ and A 2 A_2 A 2 ​ separated by distance L L L :

End-Area Method (Average End Area) : V end = A 1 + A 2 2 ⋅ L V_{\text{end}} = \frac{A_1 + A_2}{2} \cdot L V end ​ = 2 A 1 ​ + A 2 ​ ​ ⋅ L

Prismoidal Formula (for precise earthwork volumes): V pris = L 6 ( A 1 + 4 A m + A 2 ) V_{\text{pris}} = \frac{L}{6} \left( A_1 + 4 A_m + A_2 \right) V pris ​ = 6 L ​ ( A 1 ​ + 4 A m ​ + A 2 ​ ) Where A m A_m A m ​ is the cross-sectional area evaluated at the mid-station.

Worked Example: Simple Circular Curve Computation

A proposed highway survey in Laguna requires connecting two tangents intersecting at an angle I = 40 ∘ 00 ′ I = 40^\circ 00' I = 4 0 ∘ 0 0 ′ . The curve radius is selected as R = 250.00 m R = 250.00\text{ m} R = 250.00 m . Stationing of the Point of Intersection (PI) is Sta 2 + 150.00 \text{Sta } 2 + 150.00 Sta 2 + 150.00 .

Step 1: Compute Tangent Distance ( T T T ) T = R tan ⁡ ( I 2 ) = 250.00 × tan ⁡ ( 20 ∘ ) = 250.00 × 0.363970 = 90.99 m T = R \tan\left(\frac{I}{2}\right) = 250.00 \times \tan(20^\circ) = 250.00 \times 0.363970 = \mathbf{90.99\text{ m}} T = R tan ( 2 I ​ ) = 250.00 × tan ( 2 0 ∘ ) = 250.00 × 0.363970 = 90.99 m

Step 2: Compute Length of Curve ( L L L ) L = π ⋅ R ⋅ I 180 ∘ = π × 250.00 × 40 180 = 174.53 m L = \frac{\pi \cdot R \cdot I}{180^\circ} = \frac{\pi \times 250.00 \times 40}{180} = \mathbf{174.53\text{ m}} L = 18 0 ∘ π ⋅ R ⋅ I ​ = 180 π × 250.00 × 40 ​ = 174.53 m

Step 3: Compute Stationing of PC (Point of Curvature) and PT (Point of Tangency) Sta PC = Sta PI − T = ( 2 + 150.00 ) − 90.99 = Sta 2 + 059.01 \text{Sta PC} = \text{Sta PI} - T = (2+150.00) - 90.99 = \mathbf{\text{Sta } 2 + 059.01} Sta PC = Sta PI − T = ( 2 + 150.00 ) − 90.99 = Sta 2 + 059.01 Sta PT = Sta PC + L = ( 2 + 059.01 ) + 174.53 = Sta 2 + 233.54 \text{Sta PT} = \text{Sta PC} + L = (2+059.01) + 174.53 = \mathbf{\text{Sta } 2 + 233.54} Sta PT = Sta PC + L = ( 2 + 059.01 ) + 174.53 = Sta 2 + 233.54

Step 4: Compute Long Chord ( L C LC L C ) and External Distance ( E E E ) L C = 2 R sin ⁡ ( I 2 ) = 2 × 250.00 × sin ⁡ ( 20 ∘ ) = 500.00 × 0.342020 = 171.01 m LC = 2 R \sin\left(\frac{I}{2}\right) = 2 \times 250.00 \times \sin(20^\circ) = 500.00 \times 0.342020 = \mathbf{171.01\text{ m}} L C = 2 R sin ( 2 I ​ ) = 2 × 250.00 × sin ( 2 0 ∘ ) = 500.00 × 0.342020 = 171.01 m E = R ( sec ⁡ ( 20 ∘ ) − 1 ) = 250.00 × ( 1.064178 − 1 ) = 250.00 × 0.064178 = 16.04 m E = R \left(\sec(20^\circ) - 1\right) = 250.00 \times (1.064178 - 1) = 250.00 \times 0.064178 = \mathbf{16.04\text{ m}} E = R ( sec ( 2 0 ∘ ) − 1 ) = 250.00 × ( 1.064178 − 1 ) = 250.00 × 0.064178 = 16.04 m