Study guide
2.5 DENR Administrative Order DAO 2007-29 (Revised Regulations for Land Surveys) & Technical Standards
PRC Geodetic Engineering Licensure Examination Exam
Track your progress as you read
Finished sections get a check mark.
1 Chapter 1: Laws, Professional Practice, and Code of Ethics
1.1 Republic Act 8560 & RA 9200 (Philippine Geodetic Engineering Act) and PRC Board Rules 1.2 Code of Ethics for Geodetic Engineers, Professional Responsibilities & Practice Limits 1.3 PRC Licensure Examination Rules, Continuing Professional Development (CPD), and Legal Penalties
2 Chapter 2: Property, Land Registration, and Natural Resources Laws
2.1 Presidential Decree 1529 (Property Registration Decree) & The Torrens System 2.2 Commonwealth Act 141 (Public Land Act), Land Classification, and Public Land Patents 2.3 Comprehensive Agrarian Reform Law (RA 6657) & Environmental/Forestry/Mining Laws (RA 7942, PD 705) 2.4 Civil Code Provisions on Ownership, Property Boundaries, Easements, Obligations, and Contracts 2.5 DENR Administrative Order DAO 2007-29 (Revised Regulations for Land Surveys) & Technical Standards
3 Chapter 3: Mathematics, Geometry, and Trigonometry
3.1 Advanced Algebra, Analytic Geometry, and Solid Geometry in Geodetic Calculations 3.2 Plane and Spherical Trigonometry for Surveying and Astronomical Applications 3.3 Differential and Integral Calculus Applied to Curves, Surfaces, and Surveying Computations
4 Chapter 4: Engineering Sciences, Mechanics, and Economics
4.1 Engineering Mechanics (Statics, Kinematics, Dynamics) for Engineering Applications 4.2 Engineering Economics, Time Value of Money, Cash Flows, Depreciation, and Capital Costing
5 Chapter 5: Theory of Errors and Adjustment of Observations
5.1 Theory of Errors, Precision vs. Accuracy, Random/Systematic Errors, and Error Propagation 5.2 Principles of Least Squares, Most Probable Value, and Weighted Observations 5.3 Least-Squares Adjustment of Level Nets, Triangulation, and Plane Traverses
6 Chapter 6: Plane & Distance/Angle Surveying Fundamentals
6.1 Distance Measurement Methods, Taping Corrections (Temperature, Tension, Sag), and EDM Operations 6.2 Angular Measurements, Transit/Theodolite/Total Station Operations, Bearings, Azimuths, and Magnetic Declination 6.3 Differential, Trigonometric, Barometric, and Profile Leveling Methods
7 Chapter 7: Cadastral, Property, and Special Surveys
7.1 Traverse Computations, Latitudes, Departures, Error of Closure, and Transit/Compass Rule Adjustments 7.2 Area Computations (DMD, DPD, Coordinates) and Subdivision/Consolidation Survey Standards 7.3 Mineral and Mining Surveys, Hydrographic Surveying, Route Alignment, and Construction Layout
8 Chapter 8: Geodetic Surveying and Reference Datums
8.1 Ellipsoids, Geoid Undulation, Geodetic Datums, and the Philippine Reference System of 1992 (PRS92) 8.2 Geodetic Position Computations: Direct and Inverse Problems on the Reference Ellipsoid 8.3 Triangulation, Trilateration, Baseline Measurements, and National Geodetic Control Networks
9 Chapter 9: Geodetic Astronomy and Satellite Positioning (GNSS)
9.1 Celestial Sphere, Equatorial/Horizon Coordinate Systems, and Astronomical Time Systems (UT, ST, LMT) 9.2 Determination of Latitude, Longitude, and Solar/Polaris Azimuth by Astronomical Observations 9.3 Global Navigation Satellite Systems (GNSS/GPS), Carrier-Phase Positioning, RTK, and Static Baselines
10 Chapter 10: Cartography, Map Projections, and Coordinate Systems
10.1 Cartographic Principles, Map Scales, Map Symbolization, and Cartographic Generalization 10.2 Map Projections: Universal Transverse Mercator (UTM) and Philippine Transverse Mercator (PTM) Grid Systems 10.3 Survey Plan Preparation, Technical Description Formatting, and DENR Approval Workflows
11 Chapter 11: Photogrammetry, Remote Sensing, and Geographic Information Systems (GIS)
11.1 Aerial Photogrammetry, Photographic Scale, Relief Displacement, Flight Planning, and Stereoscopy 11.2 Digital Photogrammetry, UAV/Drone Surveying, Orthophoto Generation, and LiDAR Data Processing 11.3 Remote Sensing Spectral Signatures, Multispectral Image Classification, and GIS Spatial Analysis
2.5 DENR Administrative Order DAO 2007-29 (Revised Regulations for Land Surveys) & Technical Standards
Key Takeaways Explain This Topic AI
DENR Administrative Order No. 2007-29 (DAO 2007-29) provides the revised regulations governing land surveys in the Philippines, updating manual standards for Isolated, Cadastral, Mineral, and Forestry surveys.
Land surveys are categorized into Isolated Surveys (IS, individual parcels), Cadastral Surveys (Cad, municipality-wide systematic surveys), Mineral Land Surveys (MLS), and Environmental/Forestry Land Surveys (FLS/ELS).
Standard concrete survey monuments are strictly specified by physical dimensions: BLLM (20x20x100 cm), MBM/BBM/PBM, and Standard Corner Monuments / PS (concrete cylinders 15 cm in diameter by 50 cm in length).
Technical descriptions on survey plans must include corner numbers, grid/true bearings, boundary segment distances, adjoining parcel ownership/survey numbers, tie lines, and total computed area in square meters.
Survey plan verification and approval is conducted by the DENR Regional Technical Director (RTD) for Lands / Land Management Services (LMS), evaluating traverse closing errors, positional tolerances, and boundary overlaps prior to plan projection on Cadastral Maps (CM).
Last updated: July 2026
Overview & Regulatory Scope of DENR DAO 2007-29
Issued on July 31, 2007, DENR Administrative Order No. 2007-29 (DAO 2007-29) , titled "Revised Regulations on Land Surveys" , serves as the technical code governing all land survey operations in the Philippines. It modernizes land survey practices by integrating electronic total stations, Global Navigation Satellite Systems (GNSS), and the Philippine Reference System of 1992 (PRS92) into official land administration workflows.
Classification of Land Surveys under DAO 2007-29
Under DAO 2007-29, land surveys executed by registered Geodetic Engineers are classified into four major categories:
1. Isolated Land Surveys (IS)
Surveys of individual or small groups of parcels of land executed for administrative titling, judicial registration, or land transaction purposes.
Private Land Surveys (Psu) : Original surveys of untitled private lands claimed by individuals.
Subdivision Surveys (Psd / Phd) : Surveys subdividing titled parcels into two or more smaller lots.
Consolidation-Subdivision Surveys (Pcs) : Combining two or more titled lots and subdividing them into new lot configurations.
Special Work Orders (Swo) : Surveys executed for specific government projects, mapping, or land dispute resolution.
2. Cadastral Land Surveys (Cad)
Systematic, comprehensive surveys of an entire municipality, city, or designated project area to establish official boundaries of all land parcels for titling and land records management.
Cadastral Components : Control survey networks (Primary, Secondary, Tertiary), boundary monumentation of political subdivisions (PBM, MBM, BBM), lot sketching, and preparation of Cadastral Maps (CM).
3. Mineral Land Surveys (MLS)
Surveys establishing boundary lines of mining claims, quarry permits, Mineral Production Sharing Agreements (MPSA), and Financial or Technical Assistance Agreements (FTAA) under RA 7942.
4. Forestry and Environmental Land Surveys (FLS / ELS)
Surveys defining boundaries of forest reserves, national parks, protected areas, foreshore lands, and civil reservations under DENR jurisdiction.
Survey Monumentation Standards & Specifications
Proper monumentation is mandatory for all land surveys. DAO 2007-29 specifies precise physical dimensions, concrete compositions, and markings for survey monuments.
Monument Type Physical Dimensions & Shape Minimum Setting Depth Inscription & Application
Standard Corner Monument (P.S.) Concrete Cylinder: 15 cm Diameter × \times × 50 cm Length Set 45 cm in ground (5 cm projecting above) Marked "PS" (Private Survey) and corner number. Placed at lot corners.
BLLM (Bureau of Land Location Monument) Concrete Frustum/Cylinder: 20 cm × \times × 20 cm × \times × 100 cm Set 80 cm in ground Marked "BLLM No. __" and survey number. Primary reference tie point.
BBM (Barangay Boundary Monument) Concrete Frustum: 20 cm × \times × 20 cm × \times × 100 cm Set 80 cm in ground Marked "BBM No. __" and Barangay names. Defines barangay limits.
MBM (Municipal Boundary Monument) Concrete Frustum: 30 cm × \times × 30 cm × \times × 100 cm Set 80 cm in ground Marked "MBM No. __" and Municipal names. Defines municipal limits.
PBM (Provincial Boundary Monument) Concrete Frustum: 40 cm × \times × 40 cm × \times × 100 cm Set 80 cm in ground Marked "PBM No. __" and Province names. Defines provincial limits.
Technical Description Formats & PRS92 Coordinates
The Technical Description is the exact mathematical definition of a land parcel's boundaries recorded on survey plans and certificates of title. [Lot Identifier & Location]
Lot 1234, Cad-456, Situated in Brgy. San Jose, Municipality of Antipolo, Province of Rizal.
[Tie Line Call]
Beginning at a point marked "1" on plan, being S. 45 deg. 12' E., 1,234.56 m. from BLLM No. 1, Cad-456...
- [Metes & Bounds Breakdown]
- thence N. 12 deg. 34' E., 25.00 m. to corner 2;
- thence S. 77 deg. 26' E., 40.00 m. to corner 3;
- thence S. 12 deg. 34' W., 25.00 m. to corner 4;
thence N. 77 deg. 26' W., 40.00 m. to point of beginning.
[Area & Adjoining Calls]
Containing an area of ONE THOUSAND (1,000) SQUARE METERS, more or less.
Bounded on the N. by Lot 1235; on the E. by Road; on the S. by Lot 1233; on the W. by Creek.
Essential Elements of Technical Descriptions
Header : Lot number, survey plan number, location (Barangay, City/Municipality, Province, Island).
Tie Line : Bearing and distance connecting Corner 1 of the lot to an established geodetic reference monument (BLLM, BBM).
Metes and Bounds : Sequential line calls from Corner to Corner showing Bearing (Degrees, Minutes), Distance (in meters to two decimal places), and Corner Marker description.
Area Statement : Computed enclosed area expressed in square meters ( m 2 \text{m}^2 m 2 ).
Datum Integration : Positioned on the Philippine Reference System of 1992 (PRS92) grid coordinates (PTM Zone).
Verification and Approval Process by DENR-LMS
Before a land survey plan can be used for land titling at the LRA/RD, it must undergo technical verification and official approval by the DENR Land Management Services (LMS) .
- Workflow for Survey Returns Processing GE Field Survey Execution & Monumentation
- │
- ▼
- Submission of Survey Returns to DENR Regional Office (LMS)
- (Field notes, traverse computations, LDC, raw GNSS data, sketch plan)
- │
- ▼
- Technical Verification by LMS Verification Section
- (Check traverse closure, positional tolerances, overlap against Cadastral Map)
- │
- ▼
- Official Approval by Regional Technical Director (RTD) for Lands
- │
- ▼
- Projection onto Cadastral Map (CM) & Release of Approved Plan
- Key LMS Technical Verification Checks
Angular and Linear Error of Closure : Traverse calculations must meet allowable relative precision limits (e.g., 1 : 5 , 000 1:5,000 1 : 5 , 000 for secondary traverse control; 1 : 10 , 000 1:10,000 1 : 10 , 000 for primary traverse control).
Overlap and Gap Analysis : The plan is projected digitally onto the regional Cadastral Projection Map (CM) to verify that the boundary does not overlap previously titled lands or adjoining surveys.
Approval Authority : Once verified, the survey plan is formally approved and signed by the Regional Technical Director (RTD) for Lands (or Regional Executive Director), rendering the survey plan an official public document.