Study guide
8.1 PEC Scope, Definitions & Code Organization (Part 1 vs Part 2)
PRC Registered Master Electrician RME
Track your progress as you read
Finished sections get a check mark.
1 Introduction
RME Licensure Examination Overview & RA 7920 Framework How to Use This Study Guide & Build Your Study Plan
2 Chapter 1: DC & AC Circuit Fundamentals
1.1 Ohm's Law & DC Circuit Calculations 1.2 Kirchhoff's Laws & Series-Parallel Network Analysis 1.3 AC Fundamentals: Sine Waves, RMS & Phase Relationships 1.4 AC Circuit Impedance, Reactance & Resonance
3 Chapter 2: AC Power, Three-Phase Systems & DC Generators
2.1 Power in AC Circuits & Power Factor 2.2 Three-Phase Systems: Wye-Delta Configurations & Calculations 2.3 DC Generators: Construction, Types & Characteristics
4 Chapter 3: DC & AC Motors and Starting Methods
3.1 DC Motors: Construction, Types & Speed Control 3.2 AC Induction Motors: Construction, Slip & Synchronous Speed 3.3 Induction Motor Starting Methods
5 Chapter 4: Synchronous Machines & Transformers
4.1 Synchronous Motors & AC Generators (Alternators) 4.2 Transformers: Construction, Turns Ratio & Types 4.3 Transformer Losses, Efficiency, Cooling & Connections
6 Chapter 5: Motor Starters, Control Circuits & Overcurrent Devices
5.1 Motor Starters: DOL, Star-Delta & Autotransformer Starting 5.2 Motor Control Circuits & Overload Protection 5.3 Fuses & Circuit Breakers: Types, Ratings & Applications
7 Chapter 6: Control Devices & Electrical Components
6.1 Contactors, Relays & Other Control Devices 6.2 Electrical Components: Capacitors, Inductors & Resistors 6.3 Semiconductor Devices & Basic Solid-State Components
8 Chapter 7: Maintenance, Test Equipment & RA 7920 Law
7.1 Maintenance & Troubleshooting Practices 7.2 Test Equipment & Electrical Instruments 7.3 RA 7920: RME Law, Scope of Practice & PRC Regulation
9 Chapter 8: PEC Foundations: Scope & General Requirements
8.1 PEC Scope, Definitions & Code Organization (Part 1 vs Part 2) 8.2 General Installation Requirements & Working Space 8.3 Conductor Sizing, Ampacity & Derating 8.4 Overcurrent Protection & Conductor Protection Coordination
10 Chapter 9: Load Calculations & Wiring Methods
9.1 Voltage Drop & Continuous Load Calculations 9.2 Feeders, Load Calculations & Demand Factors 9.3 Wiring Methods: Raceways & Conduit Systems
11 Chapter 10: Cable Systems, Boxes & Wiring Devices
10.1 Wiring Methods: Cable Systems & Flexible Wiring 10.2 Boxes, Enclosures & Fittings 10.3 Wiring Devices, Receptacles & GFCI Protection
12 Chapter 11: Branch Circuits & Services
11.1 Branch Circuits & Multiwire Branch Circuits 11.2 Services & Service Equipment 11.3 Grounding: System & Equipment Grounding
13 Chapter 12: Bonding, Panelboards & Motor Wiring
12.1 Bonding & Grounding Electrode Systems 12.2 Panelboards & Switchboards 12.3 Motor & Generator Wiring, Protection & Disconnects
14 Chapter 13: Motor-Starter Diagrams & Hazardous Locations
13.1 Motor-Starter Wiring Diagrams & Control Symbols 13.2 One-Line Diagrams, Drawing Symbols & Wiring Plans 13.3 Hazardous (Classified) Locations
15 Chapter 14: Special Occupancies, Conditions & Safety
14.1 Special Occupancies (Wet/Damp Locations, Underground Wiring) 14.2 Special Conditions: Emergency Systems & Communications Wiring 14.3 Electrical Safety, PPE & Code-Mandated Working Clearances
16 Chapter 15: Final Review & Next Steps
15.1 RME Exam Strategy, Time Management & Test-Day Tips 15.2 After Passing: PRC Registration, CPD Renewal & Career Paths
8.1 PEC Scope, Definitions & Code Organization (Part 1 vs Part 2)
Key Takeaways Explain This Topic AI
The PEC is the technical installation standard behind RA 7920's licensure framework; Section 19 of RA 7920 lists general installation requirements as an official RME exam subject drawn directly from the PEC
The service point is the legal dividing line between PEC Part 1 (customer/building side) and PEC Part 2 (utility side up to the service point)
PEC Part 1 has ten chapters covering everything from general rules and wiring/protection through special occupancies, special equipment, and reference tables
PEC Part 1 (2017) is based on NEC 2017 in its first four chapters, adapted for Philippine conditions — useful for navigating structure, not for assuming identical values
Five foundational terms — service point, feeder, branch circuit, ampacity, and readily accessible — recur throughout the entire PEC and are frequently tested
Last updated: July 2026
What Is the Philippine Electrical Code?
The Philippine Electrical Code (PEC) is the primary technical standard governing the design, installation, and safety of electrical systems in the Philippines. Republic Act No. 7920, the Electrical Engineering Law of the Philippines, establishes the licensure framework for Professional Electrical Engineers (PEEs), Registered Electrical Engineers (REEs), and Registered Master Electricians (RMEs) — and the PEC is the enforceable installation standard those licensees are expected to know and apply on the job. Section 19 of RA 7920, which lists the subjects of the licensure examination, includes general installation requirements as an official exam topic — and those requirements come directly from the PEC. Local government units also reference PEC compliance when reviewing electrical permit applications and conducting inspections, which means the PEC functions as both a technical reference and a de facto regulatory checklist for anyone performing or supervising electrical work.
For the RME exam, the PEC is not background reading — it is the single most heavily tested source document. Understanding how the code is organized, what each part covers, and where to find specific requirements is a prerequisite for answering scenario-based exam questions correctly.
Part 1 vs. Part 2: Where Does the Line Fall?
The PEC is published in two parts, and the dividing line between them is the service point — the point of connection between the electric utility's supply facilities and the premises wiring of the building or installation being served.
PEC Part 1 governs everything from the service point inward — the customer or building side. This includes service entrance conductors and equipment, feeders, branch circuits, wiring methods, equipment installation, and all the day-to-day work a licensed electrician performs inside a residence, commercial building, or industrial facility. Its core wiring and protection rules are set out in Chapter 2 of Part 1.
PEC Part 2 governs everything up to the service point — the utility side. This covers overhead and underground supply lines, communication lines, clearances between utility conductors and structures, and safety rules for utility-owned distribution facilities. Conceptually, Part 2 plays a role similar to a national electrical safety code for utility systems, distinct from the building-wiring rules in Part 1.
Why does an RME candidate need to know Part 2 at all, if day-to-day master electrician work is overwhelmingly Part 1? Two reasons. First, RMEs regularly work near the service point — coordinating service entrance installations, meter base placement, and drop clearances — where Part 1 obligations meet Part 2 utility infrastructure, and a master electrician who misjudges that boundary can create a safety or code violation. Second, the RME licensure exam itself groups Philippine Electrical Code Parts 1 and 2 together as a single content area worth roughly half of the total exam, so both parts are fair game on exam day even though Part 1 carries more weight in daily practice.
PEC Part 1's Ten-Chapter Structure
PEC Part 1 is organized into ten chapters, each covering a distinct category of installation requirements:
- Chapter Title What It Covers
- 1 General Scope, definitions, general installation and inspection requirements
- 2 Wiring and Protection Branch circuits, feeders, services, grounding, overcurrent protection
- 3 Wiring Methods and Materials Conductor types, raceways, cable systems, boxes and fittings
- 4 Equipment for General Use Switches, receptacles, motors, transformers, capacitors, lighting
- 5 Special Occupancies Hazardous locations, healthcare facilities, places of assembly
- 6 Special Equipment Signs, cranes, welders, solar photovoltaic systems, EV charging
- 7 Special Conditions Emergency systems, standby power, fire alarm circuits
- 8 Communication Systems Telephone, data, and radio/TV distribution wiring
- 9 Watercrafts Electrical installations on boats and marinas
- 10 Tables Ampacity tables and other conductor/equipment reference data
This chapter of the study guide focuses on Chapter 1 (General) and the foundational concepts from Chapter 2 (Wiring and Protection) that every later topic builds on. Later chapters in this study guide work through Chapters 3 through 10 in more depth.
Why the NEC 2017 Foundation Matters
The 2017 edition of PEC Part 1 is based on the U.S. National Electrical Code (NEC) 2017 , adapted for Philippine environmental conditions, materials availability, and construction practices — particularly in its first four chapters. This matters practically in two ways. First, the chapter-and-article numbering logic, the general organizational philosophy (general rules first, then wiring methods, then equipment, then special conditions), and many core definitions closely track the NEC structure, so readers with NEC exposure will recognize familiar patterns even though specific values, allowances, and local adaptations differ. Second — and this cuts the other way — candidates should never assume a memorized NEC number or table value applies unmodified in the Philippines. The PEC is a distinct, independently adopted code; where it echoes the NEC's structure, use that as a study aid for navigation , not as a substitute for the PEC's own text.
Core Definitions Every RME Candidate Must Know Cold
Service point — the point of connection between the utility's supply facilities and the premises wiring of the building being served. This is the Part 1/Part 2 dividing line.
Feeder — the circuit conductors between the service equipment (or another power source) and the final branch-circuit overcurrent device.
Branch circuit — the circuit conductors between the final overcurrent device protecting the circuit and the outlet(s) it serves.
Ampacity — the maximum current, in amperes, a conductor can carry continuously under the conditions of use without exceeding its temperature rating.
Readily accessible — capable of being reached quickly for operation, renewal, or inspection, without requiring people to climb over or remove obstacles, or to use portable ladders or similar means.
These five terms recur throughout every later chapter of PEC Part 1, and RME exam questions frequently test whether a candidate can correctly distinguish a feeder from a branch circuit, or correctly identify where the service point falls in a given installation scenario.