Study guide

8.1 Ferrous & Non-Ferrous Metals, Alloys & Polymers

PRC Mechanical Engineer Licensure Examination MELE

Track your progress as you read

Finished sections get a check mark.

1 Chapter 1: Licensing Overview, Law & Professional Ethics

1.1 MELE Facts, RA 8495 & Board Organization 1.2 Code of Ethics for Mechanical Engineers & Professional Practice 1.3 Philippine Mechanical Engineering Code (PME Code) Governance & Legal Mandates

2 Chapter 2: Advanced Mathematics & Engineering Statistics

2.1 Differential & Integral Calculus in Engineering Applications 2.2 Differential Equations & Mathematical Modeling 2.3 Applied Engineering Statistics & Quality Control Probability

3 Chapter 3: Engineering Thermodynamics

3.1 Thermodynamic State Postulate, Properties & P-V-T Equations of State 3.2 First Law Analysis for Open & Closed Thermal Systems 3.3 Second Law, Entropy, Exergy & Reversibility Analysis

4 Chapter 4: Fluid Mechanics & Hydraulic Engineering

4.1 Fluid Statics, Manometry, Hydrostatic Force & Buoyancy 4.2 Fluid Kinematics, Dynamics & Bernoulli Equation 4.3 Pipe Flow, Friction Losses & Piping Network Analysis

5 Chapter 5: Heat Transfer & Thermal Systems

5.1 Conduction Heat Transfer & Thermal Insulation Design 5.2 Natural & Forced Convection Heat Transfer Correlations 5.3 Thermal Radiation & Industrial Heat Exchanger Design

6 Chapter 6: Mechanics & Strength of Materials

6.1 Statics & Dynamics of Rigid Bodies & Engineering Linkages 6.2 Normal, Shear & Triaxial Stress-Strain Relationships 6.3 Bending Stresses, Torsion & Column Buckling Analysis

7 Chapter 7: Engineering Economics & Financial Analysis

7.1 Time Value of Money & Cash Flow Equivalence Formulas 7.2 Asset Depreciation, Taxation & Economic Evaluation Methods 7.3 Break-Even Analysis, Payback Period & EOQ Inventory Models

8 Chapter 8: Engineering Materials & Metallurgy

8.1 Ferrous & Non-Ferrous Metals, Alloys & Polymers 8.2 Phase Diagrams, Iron-Carbon System & Heat Treatment 8.3 Mechanical Testing, Fatigue Failure & Fracture Mechanics

9 Chapter 9: Machine Elements & Stress Analysis

9.1 Failure Theories, Static & Fluctuating Stress Design 9.2 Power Transmission Shafts, Keys & Rigid/Flexible Couplings 9.3 Spur, Helical, Bevel & Worm Gear Design Calculations

10 Chapter 10: Power Transmission Components

10.1 Belts, V-Belts, Chains, Wire Ropes & Flywheels 10.2 Rolling Element & Hydrodynamic Journal Bearings 10.3 Mechanical Springs, Clutches & Industrial Brakes

11 Chapter 11: Manufacturing, Fasteners & GD&T

11.1 Threaded Fasteners, Rivets & Welded Joint Analysis 11.2 Manufacturing Processes, Machine Tools & Machining Calculations 11.3 Engineering Drawing, Limits, Fits, Tolerances & GD&T

12 Chapter 12: Power Plants, Boilers & Thermal Power Cycles

12.1 Steam Power Plants & Rankine Cycles 12.2 Steam Generators, Boilers & Combustion Engineering 12.3 Internal Combustion Engines: SI & CI Cycles 12.4 Gas Turbine Power Plants & Combined Cycles

13 Chapter 13: Renewable Energy, Fluid Machinery & Plant Systems

13.1 Hydroelectric, Geothermal & Renewable Energy Power Plants 13.2 Pumps & Hydraulic Machinery 13.3 Air Compressors, Fans & Blowers

14 Chapter 14: Refrigeration, HVAC & Building Mechanical Systems

14.1 Refrigeration Systems, Cycles & Refrigerants 14.2 Psychrometrics & Air Conditioning Systems 14.3 Piping/Ductwork Design, PME Code & Industrial Safety Management

8.1 Ferrous & Non-Ferrous Metals, Alloys & Polymers

Key Takeaways Explain This Topic AI

AISI/SAE alloy steels use a four-digit system (e.g., AISI 4140 contains ~0.40% C with chromium and molybdenum alloying additions).

Stainless steels are classified by crystal structure: austenitic (300 series, 18/8 Cr-Ni, non-magnetic, highest corrosion resistance), martensitic (400 series, heat-treatable for high strength), and ferritic (400 series, magnetic, non-heat treatable).

Cast irons contain >2.14% carbon; ductile iron features spherical graphite nodules induced by magnesium/cerium addition, delivering superior ductility compared to gray iron's flake graphite.

Non-ferrous alloys like 6061-T6 aluminum, C26000 brass, Ti-6Al-4V titanium, and Inconel 718 offer high strength-to-weight ratios, corrosion resistance, or elevated-temperature creep resistance.

Composite material elastic modulus is evaluated using the Rule of Mixtures: longitudinal modulus E c = V f E f + V m E m E_c = V_f E_f + V_m E_m E c ​ = V f ​ E f ​ + V m ​ E m ​ and transverse modulus E c t = E f E m V f E m + V m E f E_{ct} = \frac{E_f E_m}{V_f E_m + V_m E_f} E c t ​ = V f ​ E m ​ + V m ​ E f ​ E f ​ E m ​ ​ .

Last updated: July 2026

8.1 Ferrous & Non-Ferrous Metals, Alloys & Polymers

PRC MELE Core Focus: Engineering materials form the foundation of mechanical design, machine elements, manufacturing processes, and structural analysis in the PRC Mechanical Engineering Licensure Examination. Candidates must master material classification, alloy designation systems (AISI/SAE, ASTM, UNS), mechanical property comparisons, polymers, composites, and material selection criteria.

1. Classification of Engineering Materials

Engineering materials are broadly classified into four major categories based on chemical composition, atomic structure, and bonding characteristics:

Metallic Materials: Characterized by metallic bonding, high electrical and thermal conductivity, ductility, and luster. Subdivided into:

Ferrous Metals: Iron-based alloys (steels and cast irons).

Non-Ferrous Metals: Alloys based on aluminum, copper, titanium, nickel, magnesium, lead, and zinc.

Polymeric Materials: Organic compounds composed of long-chain molecules (macromolecules) bound by covalent bonds along the chain and weaker Van der Waals or cross-linked bonds between chains. Divided into thermoplastics, thermosets, and elastomers.

Composite Materials: Engineered combinations of two or more distinct microstructural phases (matrix and reinforcement) producing synergistic mechanical properties unobtainable from individual components.

Ceramics & Inorganic Solids: Compounds of metallic and non-metallic elements bonded ionically or covalently (oxides, nitrides, carbides), exhibiting extreme hardness, high melting points, electrical insulation, and brittle fracture behavior.

2. Ferrous Metals & AISI/SAE Designation System

Ferrous metals contain iron ( F e Fe F e ) as the primary constituent and represent the most widely used material class in mechanical engineering due to low cost, versatility, and broad heat-treatment capabilities.

Plain Carbon Steels

Plain carbon steels contain iron, carbon (up to 2.14 wt % C 2.14\text{ wt}\% \text{ C} 2.14 wt % C , typically < 1.0 wt % C < 1.0\text{ wt}\% \text{ C} < 1.0 wt % C ), and minor residuals ( Mn ≤ 1.65 % \text{Mn} \le 1.65\% Mn ≤ 1.65% , Si ≤ 0.60 % \text{Si} \le 0.60\% Si ≤ 0.60% , P ≤ 0.04 % \text{P} \le 0.04\% P ≤ 0.04% , S ≤ 0.05 % \text{S} \le 0.05\% S ≤ 0.05% ). They are categorized under the AISI/SAE 10xx designation system , where:

The first two digits ( 10 ) denote plain carbon steel.

The last two digits indicate nominal carbon content in hundredths of a percent ( 0. xx % C 0.\text{xx}\% \text{ C} 0. xx % C ).

AISI/SAE Designation Carbon Content ( wt % C \text{wt}\% \text{ C} wt % C ) Microstructure Tensile Strength S u S_u S u ​ (MPa) Typical MELE Applications

AISI 1010 / 1020 0.10 − 0.20 % 0.10 - 0.20\% 0.10 − 0.20% Ferrite + Pearlite 380 − 450 380 - 450 380 − 450 Low-carbon/mild steel: sheet metal, structural tubing, rivets, car body panels, weldments.

AISI 1045 0.43 − 0.50 % 0.43 - 0.50\% 0.43 − 0.50% Ferrite + Pearlite 570 − 690 570 - 690 570 − 690 Medium-carbon steel: crankshafts, transmission gears, axle shafts, bolts, connecting rods.

AISI 1080 0.75 − 0.85 % 0.75 - 0.85\% 0.75 − 0.85% Eutectoid Pearlite 700 − 900 700 - 900 700 − 900 High-carbon steel: coil springs, wire ropes, cutting blades, high-strength music wire.

AISI 1095 0.90 − 1.03 % 0.90 - 1.03\% 0.90 − 1.03% Pearlite + Cementite 800 − 1050 800 - 1050 800 − 1050 Ultra-high carbon steel: wood cutting tools, leaf springs, scraper blades, drills.

Alloy Steels

Alloy steels contain deliberate additions of alloying elements ( Cr , Ni , Mo , V , Mn \text{Cr}, \text{Ni}, \text{Mo}, \text{V}, \text{Mn} Cr , Ni , Mo , V , Mn ) to improve hardenability, toughness, corrosion resistance, and high-temperature strength. Under the four-digit AISI/SAE system:

41xx Series (Chromium-Molybdenum Steels): e.g., AISI 4140 ( 0.40 % C , 0.80 − 1.10 % Cr , 0.15 − 0.25 % Mo 0.40\% \text{ C}, 0.80-1.10\% \text{ Cr}, 0.15-0.25\% \text{ Mo} 0.40% C , 0.80 − 1.10% Cr , 0.15 − 0.25% Mo ). High fatigue resistance, deep hardenability, used for aircraft engine mounts, pressure vessels, machine shafts, hydraulic cylinders.

43xx Series (Nickel-Chromium-Molybdenum Steels): e.g., AISI 4340 ( 0.40 % C , 1.85 % Ni , 0.80 % Cr , 0.25 % Mo 0.40\% \text{ C}, 1.85\% \text{ Ni}, 0.80\% \text{ Cr}, 0.25\% \text{ Mo} 0.40% C , 1.85% Ni , 0.80% Cr , 0.25% Mo ). Ultra-high strength alloy steel ( S u > 1500 MPa S_u > 1500\text{ MPa} S u ​ > 1500 MPa when quenched and tempered), exceptionally tough, used for heavy-duty landing gear, drive shafts, turbine rotors.

86xx Series (Triple-Alloy Ni-Cr-Mo Steels): e.g., AISI 8620 ( 0.20 % C , 0.55 % Ni , 0.50 % Cr , 0.20 % Mo 0.20\% \text{ C}, 0.55\% \text{ Ni}, 0.50\% \text{ Cr}, 0.20\% \text{ Mo} 0.20% C , 0.55% Ni , 0.50% Cr , 0.20% Mo ). Carburizing grade alloy steel used for case-hardened gears, pinions, bushings, and camshafts.

  • 3. Stainless Steels & Tool Steels
  • Stainless Steels

Stainless steels contain a minimum of 10.5% Chromium ( Cr \text{Cr} Cr ) by weight, which reacts with atmospheric oxygen to form a passive, self-healing chromium oxide ( Cr 2 O 3 \text{Cr}_2\text{O}_3 Cr 2 ​ O 3 ​ ) surface film providing superior corrosion resistance.

Austenitic Stainless Steels (AISI 300 Series):

Compositions: 304 ( 18 % Cr , 8 % Ni 18\% \text{ Cr}, 8\% \text{ Ni} 18% Cr , 8% Ni - "18/8 stainless"), 316 ( 16 % Cr , 10 % Ni , 2 − 3 % Mo 16\% \text{ Cr}, 10\% \text{ Ni}, 2-3\% \text{ Mo} 16% Cr , 10% Ni , 2 − 3% Mo ).

Crystal Structure: Face-Centered Cubic (FCC) stable at room temperature due to Nickel addition.

Characteristics: Non-magnetic, highly ductile, excellent corrosion resistance (316 resists pitting in marine/chloride environments due to Molybdenum), non-heat treatable (strengthened only by cold work).

Martensitic Stainless Steels (AISI 400 Series):

Example: AISI 410 ( 12 − 14 % Cr , 0.15 % C 12-14\% \text{ Cr}, 0.15\% \text{ C} 12 − 14% Cr , 0.15% C ).

Crystal Structure: Body-Centered Tetragonal (BCT) upon quenching.

Characteristics: Magnetic, fully heat-treatable (quenched and tempered) to high hardness ( 50 − 60 HRC 50-60\text{ HRC} 50 − 60 HRC ), used for cutlery, steam turbine blades, surgical instruments, valves.

Ferritic Stainless Steels (AISI 400 Series):

Example: AISI 430 ( 16 − 18 % Cr , < 0.12 % C 16-18\% \text{ Cr}, < 0.12\% \text{ C} 16 − 18% Cr , < 0.12% C ).

Crystal Structure: Body-Centered Cubic (BCC).

Characteristics: Magnetic, non-heat treatable, moderate corrosion resistance, lower cost (nickel-free), used for architectural trim, automotive exhaust systems, kitchen appliances.

Tool Steels

Tool steels are high-carbon alloy steels designed for cutting, forming, and blanking tools:

W-Series (Water Hardening): Plain carbon tool steels (e.g., W1), low cost, low hardenability.

O-Series (Oil Hardening) & A-Series (Air Hardening): Cold-work tool steels (e.g., O1, A2) with minimal dimensional distortion during heat treatment.

D-Series (High Carbon, High Chromium): Cold-work steels (e.g., D2) featuring extreme wear resistance.

M-Series & T-Series (High-Speed Steels - HSS): Molybdenum (M1, M2) or Tungsten (T1) based alloys that retain hardness up to 600 ∘ C 600^\circ\text{C} 60 0 ∘ C ("red hardness") for milling cutters, drill bits, and lathe tools.

4. Cast Irons

Cast irons contain 2.14 % to 4.5 % Carbon 2.14\% \text{ to } 4.5\% \text{ Carbon} 2.14% to 4.5% Carbon and 1.0 % to 3.0 % Silicon 1.0\% \text{ to } 3.0\% \text{ Silicon} 1.0% to 3.0% Silicon . Silicon promotes graphite formation (graphitization).

Cast Iron Type Graphite Morphology Microstructural Feature Mechanical Properties Common Applications

Gray Cast Iron (ASTM A48) Sharp flakes Interconnected graphite flakes in ferrite/pearlite matrix High compressive strength ( 600 − 1000 MPa 600-1000\text{ MPa} 600 − 1000 MPa ), low tensile strength ( 150 − 350 MPa 150-350\text{ MPa} 150 − 350 MPa ), zero ductility, outstanding vibration damping Engine blocks, machine tool beds, brake drums, flywheel housings.

White Cast Iron No graphite (all carbon bound as F e 3 C Fe_3C F e 3 ​ C ) Massive cementite ( F e 3 C Fe_3C F e 3 ​ C ) phase Extremely hard ( > 400 HB > 400\text{ HB} > 400 HB ), highly wear resistant, extremely brittle, unmachinable Slurry pump impellers, ball mill liners, extrusion nozzles.

Malleable Cast Iron (ASTM A47) Temper carbon rosettes Irregular graphite clusters formed by prolonged annealing of white iron at 900 − 950 ∘ C 900-950^\circ\text{C} 900 − 95 0 ∘ C Moderate strength, good ductility ( 10 − 20 % EL 10-20\% \text{ EL} 10 − 20% EL ), impact resistant Pipe fittings, railroad car hardware, steering knuckles.

Ductile / Nodular Iron (ASTM A536) Spherical nodules Isolated graphite spheres formed by Magnesium/Cerium ladle treatment High tensile strength ( 400 − 800 MPa 400-800\text{ MPa} 400 − 800 MPa ), yield strength ( 250 − 600 MPa 250-600\text{ MPa} 250 − 600 MPa ), high toughness ( 5 − 20 % EL 5-20\% \text{ EL} 5 − 20% EL ) Crankshafts, heavy-duty gears, pressure pipe fittings, hydraulic valves.

  • 5. Non-Ferrous Alloys & Designation Systems
  • Aluminum Alloys

Aluminum has a density of ρ ≈ 2.70 g/cm 3 \rho \approx 2.70\text{ g/cm}^3 ρ ≈ 2.70 g/cm 3 (one-third of steel) and an elastic modulus of E ≈ 70 GPa E \approx 70\text{ GPa} E ≈ 70 GPa . Wrought alloys use a 4-digit system:

2xxx Series (Al-Cu): e.g., 2024-T4 / T6 ( 4.4 % Cu 4.4\% \text{ Cu} 4.4% Cu ). High strength, susceptible to intergranular corrosion; aerospace structural skins, riveted assemblies.

6xxx Series (Al-Mg-Si): e.g., 6061-T6 ( 1.0 % Mg , 0.6 % Si 1.0\% \text{ Mg}, 0.6\% \text{ Si} 1.0% Mg , 0.6% Si ). Excellent weldability, corrosion resistance, medium strength; structural frames, piping, marine structures.

7xxx Series (Al-Zn-Mg-Cu): e.g., 7075-T6 ( 5.6 % Zn , 2.5 % Mg , 1.6 % Cu 5.6\% \text{ Zn}, 2.5\% \text{ Mg}, 1.6\% \text{ Cu} 5.6% Zn , 2.5% Mg , 1.6% Cu ). Ultra-high yield strength ( S y ≈ 500 MPa S_y \approx 500\text{ MPa} S y ​ ≈ 500 MPa ), aircraft spar structures, high-stress machine parts.

Temper Designations: F (As fabricated), O (Annealed), H (Strain hardened/work hardened), T4 (Solution heat-treated and naturally aged), T6 (Solution heat-treated and artificially peak-aged).

Copper Alloys

Density ρ ≈ 8.96 g/cm 3 \rho \approx 8.96\text{ g/cm}^3 ρ ≈ 8.96 g/cm 3 , E ≈ 110 − 120 GPa E \approx 110-120\text{ GPa} E ≈ 110 − 120 GPa . Excellent thermal/electrical conductivity.

Brasses (Cu-Zn Alloys): Cartridge Brass ( C26000 , 70 % Cu , 30 % Zn 70\% \text{ Cu}, 30\% \text{ Zn} 70% Cu , 30% Zn ) offers high cold ductility for deep drawing. Muntz Metal ( C28000 , 60 % Cu , 40 % Zn 60\% \text{ Cu}, 40\% \text{ Zn} 60% Cu , 40% Zn ) is an α + β \alpha+\beta α + β two-phase hot-working brass.

Bronzes (Cu + non-zinc elements): Phosphor Bronze ( C51000 , Cu-Sn-P \text{Cu-Sn-P} Cu-Sn-P ) for corrosion-resistant springs and bushings. Aluminum Bronze ( C95400 , Cu-Al-Fe \text{Cu-Al-Fe} Cu-Al-Fe ) for heavy-duty sleeve bearings, valve guides, marine propellers.

Titanium Alloys

Density ρ ≈ 4.43 g/cm 3 \rho \approx 4.43\text{ g/cm}^3 ρ ≈ 4.43 g/cm 3 , E ≈ 115 GPa E \approx 115\text{ GPa} E ≈ 115 GPa . Extreme strength-to-weight ratio and corrosion resistance.

Ti-6Al-4V (Grade 5): Alpha-beta ( α + β \alpha+\beta α + β ) alloy containing 6 % Al 6\% \text{ Al} 6% Al ( α \alpha α -stabilizer) and 4 % V 4\% \text{ V} 4% V ( β \beta β -stabilizer). Yield strength S y ≈ 880 MPa S_y \approx 880\text{ MPa} S y ​ ≈ 880 MPa , used in jet engine compressor blades, aerospace fasteners, biomedical implants.

Nickel-Based Superalloys

Inconel 718 / Inconel 625: Retain mechanical strength, creep resistance, and oxidation resistance at temperatures exceeding 700 − 1000 ∘ C 700-1000^\circ\text{C} 700 − 100 0 ∘ C . Used in gas turbine blades, rocket engine nozzles, nuclear power piping.

  • 6. Engineering Polymers & Composites
  • Polymers

Thermoplastics: Linear or branched polymer chains held by weak Van der Waals forces. Reversibly soften upon heating and solidify upon cooling. Examples: Polyethylene (PE), Polypropylene (PP), Polyamide (Nylon 6,6 - self-lubricating gears), Polyoxymethylene (POM / Delrin / Acetal - precision gears, bushings), Polycarbonate (PC - impact-resistant windows), PTFE (Teflon - ultra-low friction coefficient μ ≈ 0.04 \mu \approx 0.04 μ ≈ 0.04 ).

Thermosets: Permanently cross-linked three-dimensional network polymers formed by irreversible chemical curing. Do not melt upon heating; decompose at elevated temperatures. Examples: Epoxy resins (matrix for carbon fiber), Phenolic resins (Bakelite), Polyurethane, Unsaturated Polyester.

Elastomers: Lightly cross-linked polymer networks capable of large reversible elastic deformations ( > 100 − 500 % strain > 100-500\% \text{ strain} > 100 − 500% strain ). Examples: Natural Rubber (NR), Nitrile Rubber (NBR - oil-resistant O-rings), Neoprene (CR), Silicone (VMQ), Viton (FKM - high-temperature chemical seals).

Composite Materials

Composites combine a high-strength reinforcement phase (fibers: glass, carbon, aramid/Kevlar) embedded in a matrix phase (polymer, metal, ceramic).

Rule of Mixtures (Longitudinal Elastic Modulus E c E_c E c ​ ): When loaded parallel to continuous unidirectional fibers: E c = V f E f + V m E m = V f E f + ( 1 − V f ) E m E_c = V_f E_f + V_m E_m = V_f E_f + (1 - V_f) E_m E c ​ = V f ​ E f ​ + V m ​ E m ​ = V f ​ E f ​ + ( 1 − V f ​ ) E m ​

Transverse Elastic Modulus ( E c t E_{ct} E c t ​ ): When loaded perpendicular to fibers: E c t = E f E m V f E m + V m E f = E f E m V f E m + ( 1 − V f ) E f E_{ct} = \frac{E_f E_m}{V_f E_m + V_m E_f} = \frac{E_f E_m}{V_f E_m + (1 - V_f) E_f} E c t ​ = V f ​ E m ​ + V m ​ E f ​ E f ​ E m ​ ​ = V f ​ E m ​ + ( 1 − V f ​ ) E f ​ E f ​ E m ​ ​

where V f V_f V f ​ and V m V_m V m ​ are volume fractions ( V f + V m = 1 V_f + V_m = 1 V f ​ + V m ​ = 1 ), and E f , E m E_f, E_m E f ​ , E m ​ are the moduli of fiber and matrix.

7. Material Property Comparison Table

Material Density ρ \rho ρ ( g/cm 3 \text{g/cm}^3 g/cm 3 ) Elastic Modulus E E E ( GPa \text{GPa} GPa ) Yield Strength S y S_y S y ​ ( MPa \text{MPa} MPa ) Tensile Strength S u S_u S u ​ ( MPa \text{MPa} MPa ) Thermal Conductivity k k k ( W/m ⋅ K \text{W/m}\cdot\text{K} W/m ⋅ K )

  • AISI 1020 Steel 7.85 207 295 395 51.9
  • AISI 4140 Q&T 7.85 207 950 1080 42.6
  • AISI 304 Stainless 8.00 193 215 505 16.2
  • Gray Cast Iron (Class 40) 7.15 110 - 276 46.0
  • Ductile Iron (65-45-12) 7.10 169 310 448 36.0
  • Aluminum 6061-T6 2.70 68.9 276 310 167.0
  • Aluminum 7075-T6 2.80 71.0 503 572 130.0
  • Ti-6Al-4V (Grade 5) 4.43 114 880 950 6.7
  • Cartridge Brass (C26000) 8.53 110 150 360 120.0
  • CFRP Composite ( V f = 0.6 V_f=0.6 V f ​ = 0.6 ) 1.55 140 1200 1500 5.0
  • 8. Worked Engineering Calculation

Problem: A unidirectional carbon-fiber reinforced epoxy composite strut for an aerospace assembly requires a longitudinal modulus of at least 150 GPa 150\text{ GPa} 150 GPa . The carbon fiber has an elastic modulus E f = 240 GPa E_f = 240\text{ GPa} E f ​ = 240 GPa and density ρ f = 1.80 g/cm 3 \rho_f = 1.80\text{ g/cm}^3 ρ f ​ = 1.80 g/cm 3 . The epoxy matrix has E m = 4.0 GPa E_m = 4.0\text{ GPa} E m ​ = 4.0 GPa and density ρ m = 1.20 g/cm 3 \rho_m = 1.20\text{ g/cm}^3 ρ m ​ = 1.20 g/cm 3 .

Calculate the minimum required fiber volume fraction V f V_f V f ​ .

Calculate the composite density ρ c \rho_c ρ c ​ at this volume fraction.

Solution:

Apply the Voigt longitudinal Rule of Mixtures: E c = V f E f + ( 1 − V f ) E m E_c = V_f E_f + (1 - V_f) E_m E c ​ = V f ​ E f ​ + ( 1 − V f ​ ) E m ​

Substitute the given target and component values: 150 = V f ( 240 ) + ( 1 − V f ) ( 4.0 ) 150 = V_f (240) + (1 - V_f) (4.0) 150 = V f ​ ( 240 ) + ( 1 − V f ​ ) ( 4.0 ) 150 = 240 V f + 4.0 − 4.0 V f 150 = 240 V_f + 4.0 - 4.0 V_f 150 = 240 V f ​ + 4.0 − 4.0 V f ​ 146 = 236 V f ⟹ V f = 146 236 = 0.61864 ≈ 61.86 % 146 = 236 V_f \implies V_f = \frac{146}{236} = 0.61864 \approx 61.86\% 146 = 236 V f ​ ⟹ V f ​ = 236 146 ​ = 0.61864 ≈ 61.86%

Calculate composite density using the rule of mixtures for mass/volume: ρ c = V f ρ f + ( 1 − V f ) ρ m \rho_c = V_f \rho_f + (1 - V_f) \rho_m ρ c ​ = V f ​ ρ f ​ + ( 1 − V f ​ ) ρ m ​ ρ c = ( 0.61864 × 1.80 ) + ( ( 1 − 0.61864 ) × 1.20 ) \rho_c = (0.61864 \times 1.80) + ((1 - 0.61864) \times 1.20) ρ c ​ = ( 0.61864 × 1.80 ) + (( 1 − 0.61864 ) × 1.20 ) ρ c = 1.11355 + ( 0.38136 × 1.20 ) = 1.11355 + 0.45763 = 1.57118 g/cm 3 ≈ 1.57 g/cm 3 \rho_c = 1.11355 + (0.38136 \times 1.20) = 1.11355 + 0.45763 = 1.57118\text{ g/cm}^3 \approx 1.57\text{ g/cm}^3 ρ c ​ = 1.11355 + ( 0.38136 × 1.20 ) = 1.11355 + 0.45763 = 1.57118 g/cm 3 ≈ 1.57 g/cm 3

9. MELE Exam Tips

Tip

Graphite In Cast Irons: Gray cast iron = flakes (high damping, brittle). Ductile iron = spheres/nodules (Magnesium added, high strength & elongation). Malleable iron = temper carbon rosettes (annealed white iron).

Stainless Steel Magnetism: Austenitic (300 series, 18/8) is non-magnetic due to FCC structure. Martensitic and Ferritic (400 series) are magnetic .

AISI Four-Digit Code: First 2 digits = alloy group (e.g., 41 = Cr-Mo, 43 = Ni-Cr-Mo, 10 = Carbon). Last 2 digits = carbon content in hundredths of 1 % 1\% 1% (e.g., 40 = 0.40 % C 0.40\% \text{ C} 0.40% C ).

Loading diagram... Classification of Engineering Materials