Study guide

3.2 First Law Analysis for Open & Closed Thermal Systems

PRC Mechanical Engineer Licensure Examination MELE

Track your progress as you read

Finished sections get a check mark.

1 Chapter 1: Licensing Overview, Law & Professional Ethics

1.1 MELE Facts, RA 8495 & Board Organization 1.2 Code of Ethics for Mechanical Engineers & Professional Practice 1.3 Philippine Mechanical Engineering Code (PME Code) Governance & Legal Mandates

2 Chapter 2: Advanced Mathematics & Engineering Statistics

2.1 Differential & Integral Calculus in Engineering Applications 2.2 Differential Equations & Mathematical Modeling 2.3 Applied Engineering Statistics & Quality Control Probability

3 Chapter 3: Engineering Thermodynamics

3.1 Thermodynamic State Postulate, Properties & P-V-T Equations of State 3.2 First Law Analysis for Open & Closed Thermal Systems 3.3 Second Law, Entropy, Exergy & Reversibility Analysis

4 Chapter 4: Fluid Mechanics & Hydraulic Engineering

4.1 Fluid Statics, Manometry, Hydrostatic Force & Buoyancy 4.2 Fluid Kinematics, Dynamics & Bernoulli Equation 4.3 Pipe Flow, Friction Losses & Piping Network Analysis

5 Chapter 5: Heat Transfer & Thermal Systems

5.1 Conduction Heat Transfer & Thermal Insulation Design 5.2 Natural & Forced Convection Heat Transfer Correlations 5.3 Thermal Radiation & Industrial Heat Exchanger Design

6 Chapter 6: Mechanics & Strength of Materials

6.1 Statics & Dynamics of Rigid Bodies & Engineering Linkages 6.2 Normal, Shear & Triaxial Stress-Strain Relationships 6.3 Bending Stresses, Torsion & Column Buckling Analysis

7 Chapter 7: Engineering Economics & Financial Analysis

7.1 Time Value of Money & Cash Flow Equivalence Formulas 7.2 Asset Depreciation, Taxation & Economic Evaluation Methods 7.3 Break-Even Analysis, Payback Period & EOQ Inventory Models

8 Chapter 8: Engineering Materials & Metallurgy

8.1 Ferrous & Non-Ferrous Metals, Alloys & Polymers 8.2 Phase Diagrams, Iron-Carbon System & Heat Treatment 8.3 Mechanical Testing, Fatigue Failure & Fracture Mechanics

9 Chapter 9: Machine Elements & Stress Analysis

9.1 Failure Theories, Static & Fluctuating Stress Design 9.2 Power Transmission Shafts, Keys & Rigid/Flexible Couplings 9.3 Spur, Helical, Bevel & Worm Gear Design Calculations

10 Chapter 10: Power Transmission Components

10.1 Belts, V-Belts, Chains, Wire Ropes & Flywheels 10.2 Rolling Element & Hydrodynamic Journal Bearings 10.3 Mechanical Springs, Clutches & Industrial Brakes

11 Chapter 11: Manufacturing, Fasteners & GD&T

11.1 Threaded Fasteners, Rivets & Welded Joint Analysis 11.2 Manufacturing Processes, Machine Tools & Machining Calculations 11.3 Engineering Drawing, Limits, Fits, Tolerances & GD&T

12 Chapter 12: Power Plants, Boilers & Thermal Power Cycles

12.1 Steam Power Plants & Rankine Cycles 12.2 Steam Generators, Boilers & Combustion Engineering 12.3 Internal Combustion Engines: SI & CI Cycles 12.4 Gas Turbine Power Plants & Combined Cycles

13 Chapter 13: Renewable Energy, Fluid Machinery & Plant Systems

13.1 Hydroelectric, Geothermal & Renewable Energy Power Plants 13.2 Pumps & Hydraulic Machinery 13.3 Air Compressors, Fans & Blowers

14 Chapter 14: Refrigeration, HVAC & Building Mechanical Systems

14.1 Refrigeration Systems, Cycles & Refrigerants 14.2 Psychrometrics & Air Conditioning Systems 14.3 Piping/Ductwork Design, PME Code & Industrial Safety Management

3.2 First Law Analysis for Open & Closed Thermal Systems

Key Takeaways Explain This Topic AI

The First Law of Thermodynamics expresses energy conservation: net energy transfer as heat and work equals the change in total system energy (Q - W = ΔE).

Quasi-equilibrium boundary work (PdV work) depends on the process path: isobaric (PΔV), isochoric (0), isothermal (P1 V1 ln(V2/V1)), and polytropic/isentropic ((P1 V1 - P2 V2)/(n - 1)).

For ideal gases, internal energy change is dU = m c_v dT and enthalpy change is dH = m c_p dT, governed by Mayer's relation c_p - c_v = R.

The Steady-Flow Energy Equation (SFEE) accounts for mass flow, enthalpy, kinetic energy, and potential energy across open system control volumes.

Engineering thermal devices streamline SFEE: nozzles convert enthalpy to kinetic energy, turbines extract shaft work, compressors consume work to boost pressure, and throttling valves preserve enthalpy (h1 = h2).

Last updated: July 2026

3.2 First Law Analysis for Open & Closed Thermal Systems

The First Law of Thermodynamics is the statement of the principle of conservation of energy. It states that energy can neither be created nor destroyed during a process; it can only change forms. For mechanical engineers analyzing power generation systems, HVAC units, internal combustion engines, and industrial fluid networks, mastering first-law energy balances for closed systems and open control volumes is fundamental.

1. First Law Formulation for Closed Systems

A closed system (or control mass) consists of a fixed amount of mass, and no mass can cross its boundary. Energy can cross the boundary in two forms: Heat ( Q Q Q ) and Work ( W W W ) .

The general First Law balance over a time interval or process from state 1 to state 2 is: Q net,in − W net,out = Δ E system Q_{\text{net,in}} - W_{\text{net,out}} = \Delta E_{\text{system}} Q net,in ​ − W net,out ​ = Δ E system ​ Δ E system = Δ U + Δ K E + Δ P E \Delta E_{\text{system}} = \Delta U + \Delta KE + \Delta PE Δ E system ​ = Δ U + Δ K E + Δ PE

where:

Δ U = m ( u 2 − u 1 ) \Delta U = m(u_2 - u_1) Δ U = m ( u 2 ​ − u 1 ​ ) = Change in internal energy

Δ K E = 1 2 m ( V 2 2 − V 1 2 ) \Delta KE = \frac{1}{2} m (\mathbf{V}_2^2 - \mathbf{V}_1^2) Δ K E = 2 1 ​ m ( V 2 2 ​ − V 1 2 ​ ) = Change in kinetic energy

Δ P E = m g ( z 2 − z 1 ) \Delta PE = m g (z_2 - z_1) Δ PE = m g ( z 2 ​ − z 1 ​ ) = Change in potential energy

For a stationary closed system , changes in kinetic and potential energy are negligible ( Δ K E = 0 , Δ P E = 0 \Delta KE = 0, \Delta PE = 0 Δ K E = 0 , Δ PE = 0 ). Thus, the energy balance simplifies to: Q − W = Δ U = m ( u 2 − u 1 ) Q - W = \Delta U = m (u_2 - u_1) Q − W = Δ U = m ( u 2 ​ − u 1 ​ )

Sign Conventions (Standard Engineering Convention) :

  • Heat added to the system: Q > 0 Q > 0 Q > 0 (+)
  • Heat rejected from the system: Q < 0 Q < 0 Q < 0 (-)
  • Work done by the system: W > 0 W > 0 W > 0 (+)
  • Work done on the system: W < 0 W < 0 W < 0 (-)
  • 2. Boundary Work ( P d V P dV P d V Work) for Closed System Processes

Boundary work ( W b W_b W b ​ ) is the energy transferred when the boundary of a closed system moves during a quasi-equilibrium expansion or compression process: W b = ∫ 1 2 P d V W_b = \int_1^2 P \, dV W b ​ = ∫ 1 2 ​ P d V

  • On a P − V P-V P − V diagram, boundary work equals the area under the process curve. P ^
  • | 1 (P1, V1)
  • | \ P V^n = C
  • | \ [Work = Area under curve]
  • |------\-------> 2 (P2, V2)
  • +------------------------> V
  • Fundamental Process Work Equations for Ideal Gases ( P V = m R T P V = m R T P V = m RT )

1. Isobaric Process ( P = constant P = \text{constant} P = constant ) W b = P ∫ 1 2 d V = P ( V 2 − V 1 ) = m R ( T 2 − T 1 ) W_b = P \int_1^2 dV = P(V_2 - V_1) = m R (T_2 - T_1) W b ​ = P ∫ 1 2 ​ d V = P ( V 2 ​ − V 1 ​ ) = m R ( T 2 ​ − T 1 ​ ) Q = Δ U + W b = m c v ( T 2 − T 1 ) + m R ( T 2 − T 1 ) = m c p ( T 2 − T 1 ) = Δ H Q = \Delta U + W_b = m c_v (T_2 - T_1) + m R (T_2 - T_1) = m c_p (T_2 - T_1) = \Delta H Q = Δ U + W b ​ = m c v ​ ( T 2 ​ − T 1 ​ ) + m R ( T 2 ​ − T 1 ​ ) = m c p ​ ( T 2 ​ − T 1 ​ ) = Δ H

2. Isochoric (Isovolumetric) Process ( V = constant V = \text{constant} V = constant ) W b = 0 W_b = 0 W b ​ = 0 Q = Δ U = m c v ( T 2 − T 1 ) Q = \Delta U = m c_v (T_2 - T_1) Q = Δ U = m c v ​ ( T 2 ​ − T 1 ​ )

3. Isothermal Process ( T = constant T = \text{constant} T = constant )

For an ideal gas, P V = C ⟹ P = C / V P V = C \implies P = C/V P V = C ⟹ P = C / V : W b = ∫ 1 2 C V d V = P 1 V 1 ln ⁡ ( V 2 V 1 ) = m R T ln ⁡ ( P 1 P 2 ) W_b = \int_1^2 \frac{C}{V} \, dV = P_1 V_1 \ln\left(\frac{V_2}{V_1}\right) = m R T \ln\left(\frac{P_1}{P_2}\right) W b ​ = ∫ 1 2 ​ V C ​ d V = P 1 ​ V 1 ​ ln ( V 1 ​ V 2 ​ ​ ) = m RT ln ( P 2 ​ P 1 ​ ​ )

Since T = constant T = \text{constant} T = constant , Δ U = 0 \Delta U = 0 Δ U = 0 ; thus Q = W b Q = W_b Q = W b ​ .

4. Polytropic Process ( P V n = C P V^n = C P V n = C , n ≠ 1 n \ne 1 n  = 1 ) W b = ∫ 1 2 C V − n d V = P 2 V 2 − P 1 V 1 1 − n = P 1 V 1 − P 2 V 2 n − 1 = m R ( T 1 − T 2 ) n − 1 W_b = \int_1^2 C V^{-n} \, dV = \frac{P_2 V_2 - P_1 V_1}{1 - n} = \frac{P_1 V_1 - P_2 V_2}{n - 1} = \frac{m R (T_1 - T_2)}{n - 1} W b ​ = ∫ 1 2 ​ C V − n d V = 1 − n P 2 ​ V 2 ​ − P 1 ​ V 1 ​ ​ = n − 1 P 1 ​ V 1 ​ − P 2 ​ V 2 ​ ​ = n − 1 m R ( T 1 ​ − T 2 ​ ) ​

5. Isentropic (Reversible Adiabatic) Process ( P V k = C P V^k = C P V k = C , n = k = c p / c v n = k = c_p/c_v n = k = c p ​ / c v ​ ) W b = P 1 V 1 − P 2 V 2 k − 1 = m R ( T 1 − T 2 ) k − 1 W_b = \frac{P_1 V_1 - P_2 V_2}{k - 1} = \frac{m R (T_1 - T_2)}{k - 1} W b ​ = k − 1 P 1 ​ V 1 ​ − P 2 ​ V 2 ​ ​ = k − 1 m R ( T 1 ​ − T 2 ​ ) ​

Since Q = 0 Q = 0 Q = 0 , W b = − Δ U = m c v ( T 1 − T 2 ) W_b = -\Delta U = m c_v (T_1 - T_2) W b ​ = − Δ U = m c v ​ ( T 1 ​ − T 2 ​ ) .

Process Type Governing Relation Boundary Work W b W_b W b ​ Formula Heat Transfer Q Q Q Formula

Isobaric P = C P = C P = C P ( V 2 − V 1 ) P(V_2 - V_1) P ( V 2 ​ − V 1 ​ ) m c p ( T 2 − T 1 ) m c_p (T_2 - T_1) m c p ​ ( T 2 ​ − T 1 ​ )

Isochoric V = C V = C V = C 0 0 0 m c v ( T 2 − T 1 ) m c_v (T_2 - T_1) m c v ​ ( T 2 ​ − T 1 ​ )

Isothermal T = C T = C T = C P 1 V 1 ln ⁡ ( V 2 / V 1 ) P_1 V_1 \ln(V_2 / V_1) P 1 ​ V 1 ​ ln ( V 2 ​ / V 1 ​ ) W b W_b W b ​

Polytropic P V n = C P V^n = C P V n = C P 1 V 1 − P 2 V 2 n − 1 \frac{P_1 V_1 - P_2 V_2}{n - 1} n − 1 P 1 ​ V 1 ​ − P 2 ​ V 2 ​ ​ m c v ( T 2 − T 1 ) + W b m c_v (T_2 - T_1) + W_b m c v ​ ( T 2 ​ − T 1 ​ ) + W b ​

Isentropic P V k = C P V^k = C P V k = C P 1 V 1 − P 2 V 2 k − 1 \frac{P_1 V_1 - P_2 V_2}{k - 1} k − 1 P 1 ​ V 1 ​ − P 2 ​ V 2 ​ ​ 0 0 0

3. Specific Heats, Internal Energy & Enthalpy

Specific heats relate temperature changes to energy changes:

Constant-volume specific heat : c v = ( ∂ u ∂ T ) v ⟹ d u = c v d T c_v = \left(\frac{\partial u}{\partial T}\right)_v \implies du = c_v dT c v ​ = ( ∂ T ∂ u ​ ) v ​ ⟹ d u = c v ​ d T

Constant-pressure specific heat : c p = ( ∂ h ∂ T ) P ⟹ d h = c p d T c_p = \left(\frac{\partial h}{\partial T}\right)_P \implies dh = c_p dT c p ​ = ( ∂ T ∂ h ​ ) P ​ ⟹ d h = c p ​ d T

For ideal gases, u u u and h h h depend only on temperature T T T (Joule's Law). Hence: Δ u = u 2 − u 1 = c v ( T 2 − T 1 ) , Δ h = h 2 − h 1 = c p ( T 2 − T 1 ) \Delta u = u_2 - u_1 = c_v (T_2 - T_1), \quad \Delta h = h_2 - h_1 = c_p (T_2 - T_1) Δ u = u 2 ​ − u 1 ​ = c v ​ ( T 2 ​ − T 1 ​ ) , Δ h = h 2 ​ − h 1 ​ = c p ​ ( T 2 ​ − T 1 ​ )

Mayer's Relation & Specific Heat Ratio c p − c v = R , k = c p c v c_p - c_v = R, \quad k = \frac{c_p}{c_v} c p ​ − c v ​ = R , k = c v ​ c p ​ ​ c v = R k − 1 , c p = k R k − 1 c_v = \frac{R}{k - 1}, \quad c_p = \frac{k R}{k - 1} c v ​ = k − 1 R ​ , c p ​ = k − 1 k R ​

For Air ( R = 0.2870 kJ/kg ⋅ K , k = 1.4 R = 0.2870\text{ kJ/kg}\cdot\text{K}, k = 1.4 R = 0.2870 kJ/kg ⋅ K , k = 1.4 ): c v = 0.718 kJ/kg ⋅ K , c p = 1.005 kJ/kg ⋅ K c_v = 0.718\text{ kJ/kg}\cdot\text{K}, \quad c_p = 1.005\text{ kJ/kg}\cdot\text{K} c v ​ = 0.718 kJ/kg ⋅ K , c p ​ = 1.005 kJ/kg ⋅ K

4. First Law for Open Systems: Steady-Flow Energy Equation (SFEE)

An open system (control volume) involves mass flow across its boundary. Under steady-state steady-flow (SSSF) conditions, mass inside the control volume remains constant ( d m cv / d t = 0 \,d m_{\text{cv}}/dt = 0 d m cv ​ / d t = 0 ) and total energy inside remains constant ( d E cv / d t = 0 \,d E_{\text{cv}}/dt = 0 d E cv ​ / d t = 0 ).

Conservation of Mass m ˙ 1 = m ˙ 2 = m ˙ = A 1 V 1 v 1 = A 2 V 2 v 2 \dot{m}_1 = \dot{m}_2 = \dot{m} = \frac{A_1 \mathbf{V}_1}{v_1} = \frac{A_2 \mathbf{V}_2}{v_2} m ˙ 1 ​ = m ˙ 2 ​ = m ˙ = v 1 ​ A 1 ​ V 1 ​ ​ = v 2 ​ A 2 ​ V 2 ​ ​

Steady-Flow Energy Equation (SFEE) per unit mass (kJ/kg) q − w = ( h 2 − h 1 ) + V 2 2 − V 1 2 2000 + g ( z 2 − z 1 ) 1000 q - w = (h_2 - h_1) + \frac{\mathbf{V}_2^2 - \mathbf{V}_1^2}{2000} + \frac{g(z_2 - z_1)}{1000} q − w = ( h 2 ​ − h 1 ​ ) + 2000 V 2 2 ​ − V 1 2 ​ ​ + 1000 g ( z 2 ​ − z 1 ​ ) ​

Rate Form of SFEE (kW or MW) Q ˙ − W ˙ = m ˙ [ ( h 2 − h 1 ) + V 2 2 − V 1 2 2000 + g ( z 2 − z 1 ) 1000 ] \dot{Q} - \dot{W} = \dot{m} \left[ (h_2 - h_1) + \frac{\mathbf{V}_2^2 - \mathbf{V}_1^2}{2000} + \frac{g(z_2 - z_1)}{1000} \right] Q ˙ ​ − W ˙ = m ˙ [ ( h 2 ​ − h 1 ​ ) + 2000 V 2 2 ​ − V 1 2 ​ ​ + 1000 g ( z 2 ​ − z 1 ​ ) ​ ]

where V \mathbf{V} V is fluid velocity (m/s), z z z is elevation (m), g = 9.81 m/s 2 g = 9.81\text{ m/s}^2 g = 9.81 m/s 2 , Q ˙ \dot{Q} Q ˙ ​ is heat transfer rate (kW), and W ˙ \dot{W} W ˙ is power output/input (kW).

SFEE Applications to Engineering Control Volume Devices

Nozzles & Diffusers :

Devices that accelerate or decelerate a fluid. W ˙ = 0 \dot{W} = 0 W ˙ = 0 , Q ˙ ≈ 0 \dot{Q} \approx 0 Q ˙ ​ ≈ 0 , Δ P E = 0 \Delta PE = 0 Δ PE = 0 . h 1 + V 1 2 2000 = h 2 + V 2 2 2000 h_1 + \frac{\mathbf{V}_1^2}{2000} = h_2 + \frac{\mathbf{V}_2^2}{2000} h 1 ​ + 2000 V 1 2 ​ ​ = h 2 ​ + 2000 V 2 2 ​ ​

Turbines (Steam / Gas / Hydraulic) :

Devices that produce shaft power. Q ˙ ≈ 0 \dot{Q} \approx 0 Q ˙ ​ ≈ 0 , Δ K E ≈ 0 \Delta KE \approx 0 Δ K E ≈ 0 , Δ P E ≈ 0 \Delta PE \approx 0 Δ PE ≈ 0 . w out = h 1 − h 2 ⟹ W ˙ out = m ˙ ( h 1 − h 2 ) w_{\text{out}} = h_1 - h_2 \implies \dot{W}_{\text{out}} = \dot{m} (h_1 - h_2) w out ​ = h 1 ​ − h 2 ​ ⟹ W ˙ out ​ = m ˙ ( h 1 ​ − h 2 ​ )

Compressors, Pumps & Fans :

Devices that increase pressure using shaft work. Q ˙ ≈ 0 \dot{Q} \approx 0 Q ˙ ​ ≈ 0 , Δ K E ≈ 0 \Delta KE \approx 0 Δ K E ≈ 0 , Δ P E ≈ 0 \Delta PE \approx 0 Δ PE ≈ 0 . w in = h 2 − h 1 ⟹ W ˙ in = m ˙ ( h 2 − h 1 ) w_{\text{in}} = h_2 - h_1 \implies \dot{W}_{\text{in}} = \dot{m} (h_2 - h_1) w in ​ = h 2 ​ − h 1 ​ ⟹ W ˙ in ​ = m ˙ ( h 2 ​ − h 1 ​ )

Throttling Valves & Expansion Tubes :

Flow-restricting devices causing a large pressure drop. W ˙ = 0 \dot{W} = 0 W ˙ = 0 , Q ˙ ≈ 0 \dot{Q} \approx 0 Q ˙ ​ ≈ 0 , Δ K E ≈ 0 \Delta KE \approx 0 Δ K E ≈ 0 , Δ P E = 0 \Delta PE = 0 Δ PE = 0 . h 1 = h 2 ( Isenthalpic Process ) h_1 = h_2 \quad (\text{Isenthalpic Process}) h 1 ​ = h 2 ​ ( Isenthalpic Process )

Heat Exchangers & Condensers :

Devices transferring thermal energy between fluid streams without work. W ˙ = 0 \dot{W} = 0 W ˙ = 0 , Δ K E ≈ 0 \Delta KE \approx 0 Δ K E ≈ 0 , Δ P E ≈ 0 \Delta PE \approx 0 Δ PE ≈ 0 . m ˙ A ( h A , 1 − h A , 2 ) = m ˙ B ( h B , 2 − h B , 1 ) \dot{m}_A (h_{A,1} - h_{A,2}) = \dot{m}_B (h_{B,2} - h_{B,1}) m ˙ A ​ ( h A , 1 ​ − h A , 2 ​ ) = m ˙ B ​ ( h B , 2 ​ − h B , 1 ​ )

  • 5. Step-by-Step Worked Numerical Calculation
  • Problem Statement

Steam enters an adiabatic steam turbine operating at steady state at P 1 = 3.0 MPa P_1 = 3.0\text{ MPa} P 1 ​ = 3.0 MPa and T 1 = 400.0 ∘ C T_1 = 400.0^\circ\text{C} T 1 ​ = 400. 0 ∘ C with an inlet enthalpy of h 1 = 3230.9 kJ/kg h_1 = 3230.9\text{ kJ/kg} h 1 ​ = 3230.9 kJ/kg and an inlet velocity of V 1 = 50.0 m/s \mathbf{V}_1 = 50.0\text{ m/s} V 1 ​ = 50.0 m/s . The steam exits the turbine at P 2 = 30.0 kPa P_2 = 30.0\text{ kPa} P 2 ​ = 30.0 kPa with a quality of x 2 = 0.920 x_2 = 0.920 x 2 ​ = 0.920 and an exit velocity of V 2 = 180.0 m/s \mathbf{V}_2 = 180.0\text{ m/s} V 2 ​ = 180.0 m/s . The mass flow rate of steam is m ˙ = 12.0 kg/s \dot{m} = 12.0\text{ kg/s} m ˙ = 12.0 kg/s . Potential energy change is negligible.

Saturated steam data at P 2 = 30.0 kPa P_2 = 30.0\text{ kPa} P 2 ​ = 30.0 kPa :

  • h f = 289.23 kJ/kg h_f = 289.23\text{ kJ/kg} h f ​ = 289.23 kJ/kg
  • h f g = 2336.1 kJ/kg h_{fg} = 2336.1\text{ kJ/kg} h f g ​ = 2336.1 kJ/kg

Calculate :

The exit enthalpy h 2 h_2 h 2 ​ of steam in kJ/kg.

The change in kinetic energy Δ k e \Delta ke Δ k e per unit mass in kJ/kg.

The work produced per unit mass w out w_{\text{out}} w out ​ in kJ/kg.

The total shaft power output W ˙ out \dot{W}_{\text{out}} W ˙ out ​ of the turbine in Megawatts (MW).

Step-by-Step Solution

Step 1: Calculate exit enthalpy ( h 2 h_2 h 2 ​ ) h 2 = h f + x 2 h f g = 289.23 + ( 0.920 × 2336.1 ) = 289.23 + 2149.21 = 2438.44 kJ/kg h_2 = h_f + x_2 h_{fg} = 289.23 + (0.920 \times 2336.1) = 289.23 + 2149.21 = 2438.44\text{ kJ/kg} h 2 ​ = h f ​ + x 2 ​ h f g ​ = 289.23 + ( 0.920 × 2336.1 ) = 289.23 + 2149.21 = 2438.44 kJ/kg

Step 2: Calculate change in kinetic energy ( Δ k e \Delta ke Δ k e ) Δ k e = V 2 2 − V 1 2 2000 = ( 180.0 ) 2 − ( 50.0 ) 2 2000 = 32400 − 2500 2000 = 29900 2000 = 14.95 kJ/kg \Delta ke = \frac{\mathbf{V}_2^2 - \mathbf{V}_1^2}{2000} = \frac{(180.0)^2 - (50.0)^2}{2000} = \frac{32400 - 2500}{2000} = \frac{29900}{2000} = 14.95\text{ kJ/kg} Δ k e = 2000 V 2 2 ​ − V 1 2 ​ ​ = 2000 ( 180.0 ) 2 − ( 50.0 ) 2 ​ = 2000 32400 − 2500 ​ = 2000 29900 ​ = 14.95 kJ/kg

Step 3: Apply SFEE to calculate work output per unit mass ( w out w_{\text{out}} w out ​ ) For an adiabatic turbine ( Q ˙ = 0 \dot{Q} = 0 Q ˙ ​ = 0 ) with negligible potential energy change ( Δ p e = 0 \Delta pe = 0 Δ p e = 0 ): q − w out = ( h 2 − h 1 ) + Δ k e q - w_{\text{out}} = (h_2 - h_1) + \Delta ke q − w out ​ = ( h 2 ​ − h 1 ​ ) + Δ k e 0 − w out = ( 2438.44 − 3230.9 ) + 14.95 0 - w_{\text{out}} = (2438.44 - 3230.9) + 14.95 0 − w out ​ = ( 2438.44 − 3230.9 ) + 14.95 − w out = − 792.46 + 14.95 = − 777.51 kJ/kg -w_{\text{out}} = -792.46 + 14.95 = -777.51\text{ kJ/kg} − w out ​ = − 792.46 + 14.95 = − 777.51 kJ/kg w out = 777.51 kJ/kg w_{\text{out}} = 777.51\text{ kJ/kg} w out ​ = 777.51 kJ/kg

Step 4: Calculate total turbine power output ( W ˙ out \dot{W}_{\text{out}} W ˙ out ​ ) W ˙ out = m ˙ w out = 12.0 kg/s × 777.51 kJ/kg = 9330.12 kW \dot{W}_{\text{out}} = \dot{m} w_{\text{out}} = 12.0\text{ kg/s} \times 777.51\text{ kJ/kg} = 9330.12\text{ kW} W ˙ out ​ = m ˙ w out ​ = 12.0 kg/s × 777.51 kJ/kg = 9330.12 kW

Convert to Megawatts (MW): W ˙ out = 9330.12 kW 1000 kW/MW = 9.330 MW \dot{W}_{\text{out}} = \frac{9330.12\text{ kW}}{1000\text{ kW/MW}} = 9.330\text{ MW} W ˙ out ​ = 1000 kW/MW 9330.12 kW ​ = 9.330 MW

Final Summary of Results :

  • Exit enthalpy h 2 = 2438.44 kJ/kg h_2 = 2438.44\text{ kJ/kg} h 2 ​ = 2438.44 kJ/kg
  • Kinetic energy change Δ k e = + 14.95 kJ/kg \Delta ke = +14.95\text{ kJ/kg} Δ k e = + 14.95 kJ/kg
  • Work per unit mass w out = 777.51 kJ/kg w_{\text{out}} = 777.51\text{ kJ/kg} w out ​ = 777.51 kJ/kg
  • Turbine Power Output W ˙ out = 9.330 MW \dot{W}_{\text{out}} = 9.330\text{ MW} W ˙ out ​ = 9.330 MW

Loading diagram... Steady-Flow Energy Equation (SFEE) Equipment Applications