Study guide
1.1 MELE Facts, RA 8495 & Board Organization
PRC Mechanical Engineer Licensure Examination MELE
Track your progress as you read
Finished sections get a check mark.
1 Chapter 1: Licensing Overview, Law & Professional Ethics
1.1 MELE Facts, RA 8495 & Board Organization 1.2 Code of Ethics for Mechanical Engineers & Professional Practice 1.3 Philippine Mechanical Engineering Code (PME Code) Governance & Legal Mandates
2 Chapter 2: Advanced Mathematics & Engineering Statistics
2.1 Differential & Integral Calculus in Engineering Applications 2.2 Differential Equations & Mathematical Modeling 2.3 Applied Engineering Statistics & Quality Control Probability
3 Chapter 3: Engineering Thermodynamics
3.1 Thermodynamic State Postulate, Properties & P-V-T Equations of State 3.2 First Law Analysis for Open & Closed Thermal Systems 3.3 Second Law, Entropy, Exergy & Reversibility Analysis
4 Chapter 4: Fluid Mechanics & Hydraulic Engineering
4.1 Fluid Statics, Manometry, Hydrostatic Force & Buoyancy 4.2 Fluid Kinematics, Dynamics & Bernoulli Equation 4.3 Pipe Flow, Friction Losses & Piping Network Analysis
5 Chapter 5: Heat Transfer & Thermal Systems
5.1 Conduction Heat Transfer & Thermal Insulation Design 5.2 Natural & Forced Convection Heat Transfer Correlations 5.3 Thermal Radiation & Industrial Heat Exchanger Design
6 Chapter 6: Mechanics & Strength of Materials
6.1 Statics & Dynamics of Rigid Bodies & Engineering Linkages 6.2 Normal, Shear & Triaxial Stress-Strain Relationships 6.3 Bending Stresses, Torsion & Column Buckling Analysis
7 Chapter 7: Engineering Economics & Financial Analysis
7.1 Time Value of Money & Cash Flow Equivalence Formulas 7.2 Asset Depreciation, Taxation & Economic Evaluation Methods 7.3 Break-Even Analysis, Payback Period & EOQ Inventory Models
8 Chapter 8: Engineering Materials & Metallurgy
8.1 Ferrous & Non-Ferrous Metals, Alloys & Polymers 8.2 Phase Diagrams, Iron-Carbon System & Heat Treatment 8.3 Mechanical Testing, Fatigue Failure & Fracture Mechanics
9 Chapter 9: Machine Elements & Stress Analysis
9.1 Failure Theories, Static & Fluctuating Stress Design 9.2 Power Transmission Shafts, Keys & Rigid/Flexible Couplings 9.3 Spur, Helical, Bevel & Worm Gear Design Calculations
10 Chapter 10: Power Transmission Components
10.1 Belts, V-Belts, Chains, Wire Ropes & Flywheels 10.2 Rolling Element & Hydrodynamic Journal Bearings 10.3 Mechanical Springs, Clutches & Industrial Brakes
11 Chapter 11: Manufacturing, Fasteners & GD&T
11.1 Threaded Fasteners, Rivets & Welded Joint Analysis 11.2 Manufacturing Processes, Machine Tools & Machining Calculations 11.3 Engineering Drawing, Limits, Fits, Tolerances & GD&T
12 Chapter 12: Power Plants, Boilers & Thermal Power Cycles
12.1 Steam Power Plants & Rankine Cycles 12.2 Steam Generators, Boilers & Combustion Engineering 12.3 Internal Combustion Engines: SI & CI Cycles 12.4 Gas Turbine Power Plants & Combined Cycles
13 Chapter 13: Renewable Energy, Fluid Machinery & Plant Systems
13.1 Hydroelectric, Geothermal & Renewable Energy Power Plants 13.2 Pumps & Hydraulic Machinery 13.3 Air Compressors, Fans & Blowers
14 Chapter 14: Refrigeration, HVAC & Building Mechanical Systems
14.1 Refrigeration Systems, Cycles & Refrigerants 14.2 Psychrometrics & Air Conditioning Systems 14.3 Piping/Ductwork Design, PME Code & Industrial Safety Management
1.1 MELE Facts, RA 8495 & Board Organization
Key Takeaways Explain This Topic AI
Republic Act No. 8495 (Philippine Mechanical Engineering Act of 1998) regulates mechanical engineering practice and created the Board of Mechanical Engineering under the PRC.
The MELE comprises 3 major subjects: Machine Design, Materials & Shop Practice (30%), Power & Industrial Plant Engineering (35%), and ME Ethics, Allied Subjects & Plant Design (35%).
To pass the MELE, examinees must achieve a General Weighted Average (GWA) of at least 70% with no subject rating below 50%.
RA 8495 establishes three categories of practice: Certified Plant Mechanic (CPM), Registered Mechanical Engineer (ME), and Professional Mechanical Engineer (PME).
PME registration requires a valid ME license, at least 4 years of active mechanical practice, an engineering report, and passing an oral board examination.
Last updated: July 2026
1.1 MELE Facts, RA 8495 & Board Organization
Quick Answer: The Mechanical Engineering Licensure Examination (MELE) is the national licensure examination administered by the Professional Regulation Commission (PRC) and the Board of Mechanical Engineering under Republic Act No. 8495 (The Philippine Mechanical Engineering Act of 1998). To pass, examinees must achieve a General Weighted Average (GWA) of at least 70% with no individual board subject rating falling below 50%. The exam evaluates three major subjects: Machine Design, Materials & Shop Practice (30%), Power & Industrial Plant Engineering (35%), and Mechanical Engineering Ethics, Allied Subjects & Industrial Plant Design (35%).
Republic Act No. 8495: The Statutory Basis of Mechanical Engineering Practice
Republic Act No. 8495 , officially titled the "Philippine Mechanical Engineering Act of 1998" , was signed into law on February 12, 1998, repealing Commonwealth Act No. 294. RA 8495 establishes the legal framework for the regulation, licensing, and professional practice of mechanical engineering across the Philippines.
The legislative policy of RA 8495 mandates the state to supervise and regulate the practice of mechanical engineering to safeguard life, health, property, and public welfare. It defines the exact scope of mechanical engineering practice, sets up the administrative machinery for professional licensure, and establishes clear qualifications and responsibilities for all mechanical engineering practitioners across commercial, industrial, and institutional sectors.
Organization and Powers of the Board of Mechanical Engineering
The Board of Mechanical Engineering (BME) is an administrative body created under RA 8495, operating under the administrative supervision and executive control of the Professional Regulation Commission (PRC) .
Composition and Appointment
The Board consists of a Chairman and two (2) Members , appointed by the President of the Philippines from a list of three (3) recommendees per vacancy submitted by the PRC. These recommendees are chosen from a list of five (5) nominees per vacancy submitted by the Accredited Integrated Professional Organization (AIPO) of Mechanical Engineers—the Philippine Society of Mechanical Engineers (PSME) .
Qualifications of Board Members
Under Section 5 of RA 8495, each Board member must satisfy the following statutory requirements at the time of appointment:
Be a natural-born citizen and resident of the Philippines.
Be at least thirty-five (35) years of age.
Hold a valid Certificate of Registration and Professional Identification Card as a Professional Mechanical Engineer (PME) , with active practice for at least ten (10) years prior to appointment.
Not be a faculty member of any school, college, or university where a degree in mechanical engineering is conferred, nor have any pecuniary interest in any review center or institution conducting review classes for board examinations.
Must not have been convicted of any offense involving moral turpitude.
Board members serve a term of three (3) years and may be reappointed for another three-year term.
Categories of Mechanical Engineering Practice
RA 8495 establishes three distinct professional categories for mechanical engineering practice in the Philippines, each defined by specific educational qualifications, experience levels, and legal scopes of authority:
Practice Category Abbreviation Education / Prerequisite Examination & Scope Legal Authority & Capacity Limits
Certified Plant Mechanic CPM 2-year vocational/technical course or 1-year trade course + required practical shop experience CPM Licensure Examination (Elements of Power Plant Machinery, Shop Machinery & Practice) Operation, maintenance, and repair of mechanical machinery/plants not exceeding 300 kW (approx. 400 HP).
Registered Mechanical Engineer ME / RME Bachelor of Science in Mechanical Engineering (BSME) Mechanical Engineering Licensure Examination (MELE) Operation, maintenance, testing, inspection, and installation of mechanical machinery/plants up to 2,000 kW (plants above 2,000 kW require a PME); preparation of plans under PME supervision.
Professional Mechanical Engineer PME Valid RME License + at least 4 years of active practice as RME Engineering Report / Thesis submission + Oral Examination by the Board Complete practice: sole authority to sign and seal mechanical plans, specifications, calculations, valuations, and consultancy for unlimited capacity .
MELE Subject Breakdown, Weights, and Syllabus Coverage
The Mechanical Engineering Licensure Examination (MELE) is administered over two consecutive days and tests examinees across three major weighted subjects: +-----------------------------------------------------------------------------------+
- | MELE SUBJECT BREAKDOWN & WEIGHTS |
- +-----------------------------------------------------------------------------------+
- | Subject 1: Machine Design, Materials & Shop Practice (MDME) --> 30% |
- | Subject 2: Power & Industrial Plant Engineering (PIPE) --> 35% |
- | Subject 3: ME Ethics, Allied Subjects & Plant Design (MEEBES) --> 35% |
- +-----------------------------------------------------------------------------------+
- 1. Machine Design, Materials & Shop Practice (MDME) — 30% Weight
Kinematics & Dynamics of Machinery : Linkages, cams, gears, velocity and acceleration analysis, flywheels, governors.
Stress & Strength Analysis : Simple, combined, torsional, and bending stresses, Mohr's circle, fatigue failure theories, stress concentration factors.
Machine Elements Design : Shafts, keys, couplings, bearings (sliding and rolling contact), spur/helical/bevel gears, belts, chains, springs, clutches, brakes, pressure vessels, and threaded fasteners.
Engineering Materials & Metallurgy : Properties of ferrous/non-ferrous metals, heat treatment processes, phase diagrams, polymers, composites, corrosion control.
Shop Practice & Machine Tools : Machining operations (lathe, milling, shaper, grinder), welding processes, foundry practice, metrology, fitting, and shop safety.
2. Power & Industrial Plant Engineering (PIPE) — 35% Weight
Thermodynamics & Heat Transfer : First and Second Laws of Thermodynamics, ideal gas cycles (Carnot, Otto, Diesel, Dual, Rankine, Brayton), conduction, convection, radiation, heat exchangers.
Internal Combustion Engines & Gas Turbines : Engine cycles, performance parameters, fuel injection systems, supercharging, gas turbine power plants.
Steam Power Plants & Auxiliaries : Boilers (fire-tube, water-tube), steam turbines, condensers, feedwater heaters, economizers, air preheaters, draft systems.
Refrigeration & Air Conditioning (RAC) : Vapor compression and absorption cycles, psychrometrics, cooling load calculations, air distribution, duct sizing, chillers.
Fluid Machinery & Piping : Centrifugal and positive displacement pumps, fans, blowers, air compressors, hydraulic turbines, ASME piping standards.
Hydroelectric & Non-Conventional Energy : Hydroelectric power plant design, solar, wind, geothermal, and biomass energy conversion systems.
3. ME Ethics, Allied Subjects & Industrial Plant Design (MEEBES) — 35% Weight
Engineering Laws & Ethics : RA 8495, ME Code of Ethics, PSME Code, contracts, obligations, professional liabilities, and labor laws.
Engineering Economics & Management : Present worth, annual cost, rate of return, depreciation methods, breakeven analysis, project scheduling.
Industrial Plant Design & Layout : Material handling, plant location selection, safety engineering, environmental pollution control.
Allied Engineering Subjects : Fluid Mechanics, Basic Electrical Engineering, Electronics, Control Systems, Materials Science basics.
The 70% GWA & 50% Subject Rating Passing Rule
Passing the MELE requires satisfying a dual-criterion grading rule evaluated by the PRC computer system:
General Weighted Average (GWA) : The examinee must achieve a final GWA of 70% or higher , calculated using the official weighted formula: GWA = ( MDME Score × 0.30 ) + ( PIPE Score × 0.35 ) + ( MEEBES Score × 0.35 ) \text{GWA} = (\text{MDME Score} \times 0.30) + (\text{PIPE Score} \times 0.35) + (\text{MEEBES Score} \times 0.35) GWA = ( MDME Score × 0.30 ) + ( PIPE Score × 0.35 ) + ( MEEBES Score × 0.35 )
Subject Floor Rule : The examinee must not score below 50% in any individual subject .
Illustrative Grading Scenarios
Candidate A : MDME = 72%, PIPE = 74%, MEEBES = 76%. GWA = ( 72 × 0.30 ) + ( 74 × 0.35 ) + ( 76 × 0.35 ) = 21.6 + 25.9 + 26.6 = 74.1 % \text{GWA} = (72 \times 0.30) + (74 \times 0.35) + (76 \times 0.35) = 21.6 + 25.9 + 26.6 = 74.1\% GWA = ( 72 × 0.30 ) + ( 74 × 0.35 ) + ( 76 × 0.35 ) = 21.6 + 25.9 + 26.6 = 74.1% . RESULT: PASSED (GWA ≥ 70 % \ge 70\% ≥ 70% and all subject ratings ≥ 50 % \ge 50\% ≥ 50% ).
Candidate B : MDME = 90%, PIPE = 85%, MEEBES = 48%. GWA = ( 90 × 0.30 ) + ( 85 × 0.35 ) + ( 48 × 0.35 ) = 27.0 + 29.75 + 16.8 = 73.55 % \text{GWA} = (90 \times 0.30) + (85 \times 0.35) + (48 \times 0.35) = 27.0 + 29.75 + 16.8 = 73.55\% GWA = ( 90 × 0.30 ) + ( 85 × 0.35 ) + ( 48 × 0.35 ) = 27.0 + 29.75 + 16.8 = 73.55% . RESULT: FAILED (GWA exceeds 70%, but MEEBES rating of 48% violates the 50% floor rule).
Qualifications and Application Requirements for MELE Examinees
Under Section 15 of RA 8495, an applicant for the MELE must establish the following prior to board admission:
Citizenship : Be a citizen of the Philippines or a foreign citizen whose country grants reciprocity to Filipino mechanical engineers.
Moral Character : Be of good moral character as attested by sworn certificates.
Degree : Hold a Bachelor of Science in Mechanical Engineering (BSME) from a university, institute, or college recognized by the Commission on Higher Education (CHED).
Documentary Requirements : PSA Birth Certificate, PSA Marriage Certificate (for married female applicants), NBI Clearance, Transcript of Records (TOR) bearing the Special Order (S.O.) number and scanned photograph, and two signed Certificates of Good Moral Character.