Study guide

3.3 Mine Capital (CAPEX), Operating Costs (OPEX) & Financial Evaluation

PRC Mining Engineer Licensure Examination Philippines

Track your progress as you read

Finished sections get a check mark.

1 Chapter 1: Surface Mining Methods & Pit Optimization

1.1 Surface Mining Unit Operations & Method Selection 1.2 Bench Geometry, Slope Stability & Geotechnical Pit Design 1.3 Cut-Off Grade Optimization & Lerchs-Grossmann Pit Limits

2 Chapter 2: Underground Mining Methods & Strata Control

2.1 Underground Mining Method Classification & Selection 2.2 Rock Mechanics, Stress Analysis & Strata Control 2.3 Underground Ground Support Systems & Excavation Design

3 Chapter 3: Materials Handling, Equipment & Mine Economics

3.1 Drilling, Blasting & Explosives Engineering 3.2 Mine Loading, Haulage & Materials Handling Systems 3.3 Mine Capital (CAPEX), Operating Costs (OPEX) & Financial Evaluation

4 Chapter 4: Mine Safety, Ventilation & Philippine Mining Laws

4.1 Mine Ventilation Network Analysis & Environmental Quality 4.2 Philippine Mine Safety Rules, Health & Disaster Prevention 4.3 Philippine Mining Act of 1995 (RA 7942), DAO 2010-21 & Mining Ethics

5 Chapter 5: Physical Geology, Mineralogy & Philippine Deposit Types

5.1 Structural Geology, Tectonics & Ore Controls 5.2 Igneous, Metamorphic & Sedimentary Ore Mineralogy 5.3 Major Philippine Ore Deposit Models

6 Chapter 6: Mineral Exploration, Geophysics & Core Logging

6.1 Geochemical & Remote Sensing Exploration Techniques 6.2 Geophysical Exploration Methods in Mining Geology 6.3 Diamond Drilling, Core Logging & QA/QC Protocols

7 Chapter 7: Geostatistics, Resource Estimation & PMRC Code

7.1 Ore Body Block Modeling & Spatial Variography 7.2 Inverse Distance & Ordinary Kriging Grade Estimation 7.3 Philippine Mineral Reporting Code (PMRC 2020) & Resource Classification

8 Chapter 8: Comminution, Sizing & Physical Mineral Separation

8.1 Crushing, Grinding & Bond Work Index Calculations 8.2 Particle Screening, Hydrocyclone Classification & Sizing 8.3 Gravity Concentration & Magnetic/Electrostatic Separation

9 Chapter 9: Froth Flotation & Extractive Hydrometallurgy

9.1 Froth Flotation Chemistry, Reagents & Cell Kinetics 9.2 Leaching Technologies (Heap, Agitation & Tank) 9.3 Precious Metal Recovery: CIP, CIL, Merrill-Crowe & Electrowinning

10 Chapter 10: Process Plant Flowsheets & Environmental Tailings Management

10.1 Metallurgical Plant Flowsheets & Pulp Mass Balances 10.2 Tailings Storage Facility (TSF) Design & Dam Safety 10.3 Acid Mine Drainage (AMD) Mitigation & Environmental Protection (EPEP/FMR/DP)

11 Chapter 11: 2025 PRC Blueprint, Prospecting Tools & Exploration Decisions

11.1 Official 2025 TOS, Three-Paper Structure & Exam Strategy 11.2 Prospecting Instruments, Base Maps & Surface Geological Mapping 11.3 Integrating Direct and Indirect Evidence for Exploration Decisions

12 Chapter 12: Mine Infrastructure, Sustainable Development & Climate

12.1 Power, Water, Drainage & Support-Facility Selection 12.2 Sustainable Development, Progressive Rehabilitation & Community Impact 12.3 Mining, Climate, Reforestation, Coal & Energy-Transition Minerals

13 Chapter 13: Mine Valuation, Financial Analysis & Due Diligence

13.1 Time Value of Money, Future Value & Present Value 13.2 Financial Statements, Mine Economics & External Price Drivers 13.3 Exploration Provenance, Technical Review & Legal Due Diligence

14 Chapter 14: Mine Organization, Communication & Accountable Leadership

14.1 Line and Staff Functions in a Mining Organization 14.2 Communication With Superiors, Peers & Subordinates 14.3 Authority, Responsibility, Delegation & Safety Accountability

15 Chapter 15: Philippine Mining Law, Indigenous Rights & Professional Ethics

15.1 Legal Hierarchy, Mineral Tenure & Compliance Analysis 15.2 Constitutional Participation, IPRA, FPIC & Ancestral Domains 15.3 RA 4274, Professional Scope, Ethics & Document Integrity

16 Chapter 16: Applied Mathematics & Mine Surveying

16.1 Engineering Mathematics for Safe, Efficient Mine Decisions 16.2 Survey Control, Instruments, Traverses & Error Adjustment 16.3 Topographic Maps, Underground Set-Out & Survey Timeliness

17 Chapter 17: Feasibility Studies, Data Quality & Project Decisions

17.1 Scoping, Pre-Feasibility & Final Feasibility Study Maturity 17.2 Data Accuracy, Assumption Control & Go/No-Go Decisions 17.3 Multidisciplinary Integration, Interfaces & Independent Review

18 Chapter 18: Mining Computer Applications, Digital Control & Global Developments

18.1 Computer Functions, Office Applications & Data Governance 18.2 Geological Modeling, Mine Planning, Scheduling & Valuation Software 18.3 Real-Time Control, Critical Minerals & Regional Mining Developments

19 Chapter 19: Earth Systems, Geologic Time & Philippine Hazards

19.1 Solar-System Origin, Earth Interior & Atmospheric Layers 19.2 Rock Cycle, Landforms & the Geologic Time Scale 19.3 Philippine Tectonics, Geologic Hazards & Mitigation

20 Chapter 20: Metallurgy, Foundry Practice & Assaying

20.1 Extractive, Physical & Adaptive Metallurgy Principles 20.2 Foundry Materials, Casting, Solidification & Defects 20.3 Sampling, Fire Assay, Cupellation, Parting & Assay Calculations

21 Chapter 21: Solid–Liquid Separation, Environmental Law & Mine Ecology

21.1 Thickening, Filtration & Solid–Liquid Separation 21.2 Philippine Air, Water, Waste & Hazardous-Substance Controls 21.3 Mine Ecology, Closure, Tailings, Waste & Community Livelihood

3.3 Mine Capital (CAPEX), Operating Costs (OPEX) & Financial Evaluation

Key Takeaways Explain This Topic AI

Mining project expenditures are divided into Pre-Production Capital Expenditure (Initial CAPEX for feasibility studies, land acquisition, mine development, processing plant construction) and Sustaining CAPEX (equipment fleet replacement, tailing dam raises, ongoing underground development).

Operating Costs (OPEX) are measured per tonne moved (mining OPEX) and per tonne milled/processed (milling and G&A OPEX), defining the cash cost per unit of payable metal (e.g., All-In Sustaining Cost [AISC] per ounce of gold or pound of copper).

DCF models must use the applicable contract and current Philippine fiscal law: RA 12253 now adds large-scale metallic-mining royalties, windfall tax, ring-fencing, and a related-party 2:1 debt-to-equity limit while retaining the mineral excise-tax framework.

Net Present Value (NPV = sum(NCF_t / (1+r)^t) - Initial CAPEX) defines net project wealth creation, while Internal Rate of Return (IRR) is the discount rate at which NPV = 0.

Sensitivity analysis (spider diagrams) tests project resilience against independent variations in commodity metal prices, capital costs, operating costs, recovery rates, and foreign exchange (USD/PHP) rates.

Last updated: August 2026

3.3 Mine Capital (CAPEX), Operating Costs (OPEX) & Financial Evaluation

Mine economics and financial evaluation synthesize technical engineering designs—geology, mine plans, geotechnical constraints, metallurgy, and equipment fleets—into rigorous financial metrics. Because mining requires massive upfront capital investments before generating initial revenue, disciplined financial evaluation ensures capital allocation delivers acceptable risk-adjusted returns.

1. Capital Expenditure (CAPEX) Classification

Capital expenditure represents funds committed to acquire, construct, upgrade, or maintain fixed assets:

Pre-Production / Initial CAPEX : Capital deployed prior to commercial mineral production. Key components include:

Exploration, scoping, pre-feasibility (PFS), and definitive feasibility studies (DFS).

Environmental Impact Statements (EIS), permitting, land acquisition, and resettlement.

Initial mine access development (pre-stripping in surface mines or shaft sinking, decline development, and underground crosscuts).

Mineral processing plant construction (crushing, grinding, flotation/leaching circuits), tailings storage facility (TSF) stage 1 starter dam, surface civil infrastructure, power plant, and water supply.

Initial equipment fleet acquisition and working capital reserves.

Sustaining CAPEX : Ongoing capital required over the Life of Mine (LOM) to maintain planned production rates. This includes periodic haul truck fleet overhauls and replacements, progressive TSF embankment raises, underground lateral development, and process plant component rebuilds.

2. Operating Expenditure (OPEX) & Unit Cost Dynamics

Operating expenditures represent recurring costs incurred during day-to-day mineral extraction and processing:

Mining OPEX : Costs associated with drilling, blasting, loading, haulage, pit dewatering, ground support, and waste dump maintenance. Expressed as unit cost per tonne of material moved ( $ / tonne moved \text{\textdollar}/\text{tonne moved} $ / tonne moved ) or per tonne of ore mined ( $ / tonne ore \text{\textdollar}/\text{tonne ore} $ / tonne ore ).

Processing / Milling OPEX : Energy for comminution (crushing and grinding), grinding media wear (steel balls/rods), chemical reagents (flotation collectors, cyanide, lime, acid), plant maintenance, and metallurgical labor. Expressed as unit cost per tonne of ore processed ( $ / tonne milled \text{\textdollar}/\text{tonne milled} $ / tonne milled ).

General & Administrative (G&A) OPEX : Site management, safety, environmental monitoring, human resources, legal compliance, community relations, and corporate overhead.

Cost labels must be defined before comparison. Gold producers may report cash costs and the World Gold Council's non-GAAP AISC measure, while C1 terminology is used in some commodity cost curves with provider-specific definitions:

Cash / C1 cost : Often includes direct mining, processing, site G&A, transport, and off-site charges net of byproduct credits, but the adopted source controls the boundary.

All-In Sustaining Cost (AISC) : Includes C1 Cash Costs plus sustaining CAPEX, corporate G&A, reclamation accretion, and ongoing exploration. AISC is a non-GAAP industry metric whose inclusions and exclusions depend on the adopted reporting guidance; define and reconcile it before using a per-unit comparison (e.g., $ / oz Gold \text{\textdollar}/\text{oz Gold} $ / oz Gold or $ / lb Copper \text{\textdollar}/\text{lb Copper} $ / lb Copper ).

3. Discounted Cash Flow (DCF) Modeling & Tax Framework

DCF analysis evaluates investment viability by projecting annual Net Cash Flows ( N C F t NCF_t NC F t ​ ) over the project life and discounting them to present value: N C F t = Gross Revenue t − OPEX t − Royalties t − Taxes t − Sustaining CAPEX t − Δ Working Capital t NCF_t = \text{Gross Revenue}_t - \text{OPEX}_t - \text{Royalties}_t - \text{Taxes}_t - \text{Sustaining CAPEX}_t - \Delta\text{Working Capital}_t NC F t ​ = Gross Revenue t ​ − OPEX t ​ − Royalties t ​ − Taxes t ​ − Sustaining CAPEX t ​ − Δ Working Capital t ​

Gross revenue equals payable metal volume multiplied by forecasted commodity market prices minus smelting/refining deductions.

Cash flows are discounted using the Weighted Average Cost of Capital (WACC) or a hurdle rate reflecting project risk: r = W A C C = w e ⋅ r e + w d ⋅ r d ⋅ ( 1 − T ) r = WACC = w_e \cdot r_e + w_d \cdot r_d \cdot (1 - T) r = W A CC = w e ​ ⋅ r e ​ + w d ​ ⋅ r d ​ ⋅ ( 1 − T )

where w e , w d w_e, w_d w e ​ , w d ​ are equity and debt proportions, r e , r d r_e, r_d r e ​ , r d ​ are cost of equity and debt, and T T T is corporate tax rate.

4. Primary Financial Evaluation Metrics (NPV, IRR, Payback)

Net Present Value (NPV) : The sum of all discounted future net cash flows minus initial capital cost: N P V = ∑ t = 0 N N C F t ( 1 + r ) t NPV = \sum_{t=0}^{N} \frac{NCF_t}{(1 + r)^t} NP V = t = 0 ∑ N ​ ( 1 + r ) t NC F t ​ ​ A positive N P V NPV NP V indicates value above the chosen discount-rate benchmark for the stated cash-flow basis and assumptions. It does not prove financeability, permitability, or value to a particular capital provider unless the cash flows and rate are defined consistently.

Internal Rate of Return (IRR) : The discount rate at which project N P V NPV NP V equals exactly zero: ∑ t = 0 N N C F t ( 1 + I R R ) t = 0 \sum_{t=0}^{N} \frac{NCF_t}{(1 + IRR)^t} = 0 t = 0 ∑ N ​ ( 1 + I RR ) t NC F t ​ ​ = 0 Compare a meaningful project I R R IRR I RR with the approved hurdle rate, but do not infer viability from that comparison alone. Non-conventional cash flows can create multiple or no IRRs, and value, scale, liquidity, risk, permits, and constraints still matter.

Payback Period : The time required for cumulative net cash inflows to recover the initial CAPEX. Discounted payback period incorporates the time value of money.

5. Current Philippine Fiscal and Royalty Framework

A financial model must identify commodity, scale, mineral agreement, location inside or outside a mineral reservation, contract date and renewal, tax-effective date, and applicable implementing rules. Applying one percentage to every mine is a category error.

Mineral Excise Tax : The TRAIN-law framework retains the 4% excise tax on metallic and non-metallic minerals and quarry resources. Calculate the statutory base and point of liability under the current National Internal Revenue Code and BIR rules.

RA 12253—Enhanced Fiscal Regime : Republic Act 12253 applies to large-scale metallic mining. BIR Revenue Memorandum Circular 58-2026 states that affected contractors and operators became subject to the regime on February 17, 2026.

Inside Mineral Reservations : The implementing rules retain a 5% royalty on gross output for large-scale metallic operations within mineral reservations.

Outside Mineral Reservations : A five-tier royalty of 1% to 5% applies to income from metallic mining operations according to margin. If margin is less than or equal to zero, the minimum is 0.1% of gross output.

Windfall Profits Tax : A separate 1% to 10% tiered tax applies when the statutory net-income margin reaches the specified bands beginning at 30%.

Tax Integrity Rules : Each mineral agreement or FTAA is ring-fenced as a separate taxable entity for these taxes, and related-party interest deductions are limited using a 2:1 debt-to-equity rule.

Existing Contracts : RA 12253 protects valid pre-effectivity mineral agreements and FTAAs according to Section 13, subject to their terms, renewal, and specified exceptions. Never overwrite the actual agreement with a generic “current” assumption.

Indigenous Cultural Communities : For mineral utilization under an agreement with an Indigenous cultural community, RA 7942 says the royalty amount is agreed by the parties and forms part of a trust fund for the community's socioeconomic well-being.

Environmental and Social Commitments : Model the approved EPEP/AEPEP, Mine Rehabilitation Fund, FMR/DP and its funding, mine-waste and tailings fees, and Social Development and Management Program. Keep plan costs, trust funds, fees, royalties, and taxes separate.

Build a fiscal register that identifies the legal source, tax base, deductible items, rate or tier, filing period, cash-payment timing, escalation, and model owner. Sensitivity must test both metal-price effects and the movement of margins between royalty and windfall-tax bands.

6. Sensitivity & Risk Analysis

Mine financial models are built on forward-looking estimates subject to market volatility. Sensitivity Analysis evaluates how N P V NPV NP V and I R R IRR I RR change when key variables vary independently (typically by ± 10 % , ± 20 % \pm 10\%, \pm 20\% ± 10% , ± 20% ):

Commodity Metal Prices : Primary driver of cash flow; N P V NPV NP V is highly sensitive to long-term metal price forecasts.

Head Grade & Metallurgical Recovery : Directly impacts payable metal output.

Initial & Sustaining CAPEX : Impacts upfront funding and payback duration.

Operating Costs (OPEX) : Fuel, electricity, grinding media, and labor inflation.

Exchange Rates : A Philippine operation may earn US-dollar-linked revenue while paying part of its cost base in pesos. Peso depreciation can reduce the USD-equivalent of genuinely local peso costs, but imported equipment and reagents, foreign-currency debt, wage and fuel inflation, hedging, and contract escalation can offset or reverse the effect.

Spider diagrams plot changes in selected inputs against project N P V NPV NP V , showing sensitivity over the chosen ranges. Sensitivity is not probability or risk by itself; correlations, likelihoods, nonlinearities, and combined scenarios require separate analysis.