Study guide

9.3 Precious Metal Recovery: CIP, CIL, Merrill-Crowe & Electrowinning

PRC Mining Engineer Licensure Examination Philippines

Track your progress as you read

Finished sections get a check mark.

1 Chapter 1: Surface Mining Methods & Pit Optimization

1.1 Surface Mining Unit Operations & Method Selection 1.2 Bench Geometry, Slope Stability & Geotechnical Pit Design 1.3 Cut-Off Grade Optimization & Lerchs-Grossmann Pit Limits

2 Chapter 2: Underground Mining Methods & Strata Control

2.1 Underground Mining Method Classification & Selection 2.2 Rock Mechanics, Stress Analysis & Strata Control 2.3 Underground Ground Support Systems & Excavation Design

3 Chapter 3: Materials Handling, Equipment & Mine Economics

3.1 Drilling, Blasting & Explosives Engineering 3.2 Mine Loading, Haulage & Materials Handling Systems 3.3 Mine Capital (CAPEX), Operating Costs (OPEX) & Financial Evaluation

4 Chapter 4: Mine Safety, Ventilation & Philippine Mining Laws

4.1 Mine Ventilation Network Analysis & Environmental Quality 4.2 Philippine Mine Safety Rules, Health & Disaster Prevention 4.3 Philippine Mining Act of 1995 (RA 7942), DAO 2010-21 & Mining Ethics

5 Chapter 5: Physical Geology, Mineralogy & Philippine Deposit Types

5.1 Structural Geology, Tectonics & Ore Controls 5.2 Igneous, Metamorphic & Sedimentary Ore Mineralogy 5.3 Major Philippine Ore Deposit Models

6 Chapter 6: Mineral Exploration, Geophysics & Core Logging

6.1 Geochemical & Remote Sensing Exploration Techniques 6.2 Geophysical Exploration Methods in Mining Geology 6.3 Diamond Drilling, Core Logging & QA/QC Protocols

7 Chapter 7: Geostatistics, Resource Estimation & PMRC Code

7.1 Ore Body Block Modeling & Spatial Variography 7.2 Inverse Distance & Ordinary Kriging Grade Estimation 7.3 Philippine Mineral Reporting Code (PMRC 2020) & Resource Classification

8 Chapter 8: Comminution, Sizing & Physical Mineral Separation

8.1 Crushing, Grinding & Bond Work Index Calculations 8.2 Particle Screening, Hydrocyclone Classification & Sizing 8.3 Gravity Concentration & Magnetic/Electrostatic Separation

9 Chapter 9: Froth Flotation & Extractive Hydrometallurgy

9.1 Froth Flotation Chemistry, Reagents & Cell Kinetics 9.2 Leaching Technologies (Heap, Agitation & Tank) 9.3 Precious Metal Recovery: CIP, CIL, Merrill-Crowe & Electrowinning

10 Chapter 10: Process Plant Flowsheets & Environmental Tailings Management

10.1 Metallurgical Plant Flowsheets & Pulp Mass Balances 10.2 Tailings Storage Facility (TSF) Design & Dam Safety 10.3 Acid Mine Drainage (AMD) Mitigation & Environmental Protection (EPEP/FMR/DP)

11 Chapter 11: 2025 PRC Blueprint, Prospecting Tools & Exploration Decisions

11.1 Official 2025 TOS, Three-Paper Structure & Exam Strategy 11.2 Prospecting Instruments, Base Maps & Surface Geological Mapping 11.3 Integrating Direct and Indirect Evidence for Exploration Decisions

12 Chapter 12: Mine Infrastructure, Sustainable Development & Climate

12.1 Power, Water, Drainage & Support-Facility Selection 12.2 Sustainable Development, Progressive Rehabilitation & Community Impact 12.3 Mining, Climate, Reforestation, Coal & Energy-Transition Minerals

13 Chapter 13: Mine Valuation, Financial Analysis & Due Diligence

13.1 Time Value of Money, Future Value & Present Value 13.2 Financial Statements, Mine Economics & External Price Drivers 13.3 Exploration Provenance, Technical Review & Legal Due Diligence

14 Chapter 14: Mine Organization, Communication & Accountable Leadership

14.1 Line and Staff Functions in a Mining Organization 14.2 Communication With Superiors, Peers & Subordinates 14.3 Authority, Responsibility, Delegation & Safety Accountability

15 Chapter 15: Philippine Mining Law, Indigenous Rights & Professional Ethics

15.1 Legal Hierarchy, Mineral Tenure & Compliance Analysis 15.2 Constitutional Participation, IPRA, FPIC & Ancestral Domains 15.3 RA 4274, Professional Scope, Ethics & Document Integrity

16 Chapter 16: Applied Mathematics & Mine Surveying

16.1 Engineering Mathematics for Safe, Efficient Mine Decisions 16.2 Survey Control, Instruments, Traverses & Error Adjustment 16.3 Topographic Maps, Underground Set-Out & Survey Timeliness

17 Chapter 17: Feasibility Studies, Data Quality & Project Decisions

17.1 Scoping, Pre-Feasibility & Final Feasibility Study Maturity 17.2 Data Accuracy, Assumption Control & Go/No-Go Decisions 17.3 Multidisciplinary Integration, Interfaces & Independent Review

18 Chapter 18: Mining Computer Applications, Digital Control & Global Developments

18.1 Computer Functions, Office Applications & Data Governance 18.2 Geological Modeling, Mine Planning, Scheduling & Valuation Software 18.3 Real-Time Control, Critical Minerals & Regional Mining Developments

19 Chapter 19: Earth Systems, Geologic Time & Philippine Hazards

19.1 Solar-System Origin, Earth Interior & Atmospheric Layers 19.2 Rock Cycle, Landforms & the Geologic Time Scale 19.3 Philippine Tectonics, Geologic Hazards & Mitigation

20 Chapter 20: Metallurgy, Foundry Practice & Assaying

20.1 Extractive, Physical & Adaptive Metallurgy Principles 20.2 Foundry Materials, Casting, Solidification & Defects 20.3 Sampling, Fire Assay, Cupellation, Parting & Assay Calculations

21 Chapter 21: Solid–Liquid Separation, Environmental Law & Mine Ecology

21.1 Thickening, Filtration & Solid–Liquid Separation 21.2 Philippine Air, Water, Waste & Hazardous-Substance Controls 21.3 Mine Ecology, Closure, Tailings, Waste & Community Livelihood

9.3 Precious Metal Recovery: CIP, CIL, Merrill-Crowe & Electrowinning

Key Takeaways Explain This Topic AI

Elsner's equation shows that gold cyanidation needs cyanide and oxygen; protective alkalinity suppresses volatile HCN, but the operating pH and reagent targets are selected from site chemistry, safety controls, recovery, and applicable standards.

Carbon-in-Leach (CIL) presents fresh activated carbon directly within cyanidation tanks to outcompete native carbonaceous gangue in preg-robbing ores, whereas Carbon-in-Pulp (CIP) separates leaching and carbon adsorption into sequential stages.

Loaded activated carbon is eluted via the Zadra or AARL process and thermally reactivated in rotary kilns at 650 ∘ C − 750 ∘ C 650^\circ\text{C} - 750^\circ\text{C} 65 0 ∘ C − 75 0 ∘ C in a steam environment.

Merrill-Crowe uses clarification, deaeration, zinc cementation, and precipitate filtration; suspended-solids and dissolved-oxygen targets are validated for the solution and equipment rather than assumed from one universal limit.

Electrowinning gold onto steel wool cathodes followed by acid digestion, calcination, fluxing, and smelting at 1 , 100 ∘ C − 1 , 200 ∘ C 1,100^\circ\text{C} - 1,200^\circ\text{C} 1 , 10 0 ∘ C − 1 , 20 0 ∘ C yields unrefined gold-silver doré bullion bars.

Last updated: August 2026

Gold and silver extraction relies heavily on alkaline cyanidation to form soluble dicyanoaurate [Au(CN) 2 ] − \text{[Au(CN)}_2\text{]}^- [Au(CN) 2 ​ ] − and dicyanoargentate [Ag(CN) 2 ] − \text{[Ag(CN)}_2\text{]}^- [Ag(CN) 2 ​ ] − complex ions, followed by solution purification, concentration, and reduction to metallic bullion.

Cyanidation Chemistry & Elsner's Equation

The oxidative dissolution of metallic gold in alkaline sodium cyanide solution is defined by Elsner's Equation : 4 Au + 8 NaCN + O 2 + 2 H 2 O → 4 Na [ Au ( CN ) 2 ] + 4 NaOH 4\text{Au} + 8\text{NaCN} + \text{O}_2 + 2\text{H}_2\text{O} \rightarrow 4\text{Na}[\text{Au}(\text{CN})_2] + 4\text{NaOH} 4 Au + 8 NaCN + O 2 ​ + 2 H 2 ​ O → 4 Na [ Au ( CN ) 2 ​ ] + 4 NaOH

Key Process Parameters

Cyanide Concentration : Set free-cyanide concentration from ore demand, solution chemistry, kinetics, recovery, detoxification, safety, and permit conditions; a plant range is not universal.

Dissolved Oxygen (DO) : Oxygen is an electron acceptor in gold dissolution. Air or oxygen addition and any lead-nitrate use must be justified by diagnostic leach tests and plant response; excessive reagent can add cost, hazards, or downstream effects.

Protective Alkalinity : Lime or another alkali provides protective alkalinity. The operating pH must suppress HCN while balancing cyanide consumption, scaling, leach kinetics, and the approved safety system; 10 to 10.5 is a common reference range, not a universal strict setpoint. Maintaining alkaline conditions prevents the hydrolysis of cyanide ions ( CN − \text{CN}^- CN − ) into volatile, lethal hydrogen cyanide gas ( HCN \text{HCN} HCN ): CN − + H 2 O ⇌ HCN + OH − ( p K a = 9.31 ) \text{CN}^- + \text{H}_2\text{O} \rightleftharpoons \text{HCN} + \text{OH}^- \quad (pK_a = 9.31) CN − + H 2 ​ O ⇌ HCN + OH − ( p K a ​ = 9.31 )

If slurry pH \text{pH} pH drops below 9.31 9.31 9.31 , the equilibrium shifts rapidly toward HCN \text{HCN} HCN gas evolution, posing severe health hazards and consuming expensive reagent.

Carbon Adsorption Technologies: CIP vs. CIL & Carbon Elution

Once gold is dissolved into solution, granular activated carbon manufactured from coconut shells ( 6 × 16 mesh 6 \times 16 \text{ mesh} 6 × 16 mesh , surface area 1 , 000 − 1 , 200 m 2 / g 1,000 - 1,200 \text{ m}^2/\text{g} 1 , 000 − 1 , 200 m 2 / g ) is utilized to adsorb the gold-cyanide complex.

1. Carbon-in-Pulp (CIP) vs. Carbon-in-Leach (CIL)

Carbon-in-Pulp (CIP) : Slurry flows through a series of leach tanks (typically 4 to 6 tanks) to achieve complete gold dissolution before entering a separate cascade of adsorption tanks containing 10 − 25 g/L 10 - 25 \text{ g/L} 10 − 25 g/L of activated carbon. Carbon moves counter-current to slurry flow via air-lift pumps, and interstage vibrating or equalized screens retain coarse carbon while fine slurry passes through.

Carbon-in-Leach (CIL) : Cyanidation leaching and carbon adsorption occur simultaneously in the same tank cascade. CIL is often considered for preg-robbing ores —ores containing natural active carbonaceous matter or reactive clays that adsorb dissolved gold cyanide before recovery. By adding fresh activated carbon directly into the leaching tanks, activated carbon outcompetes native preg-robbing components for gold uptake.

2. Carbon Elution (Desorption) Methods

Loaded carbon carrying 3 , 000 − 8 , 000 g/t Au 3,000 - 8,000 \text{ g/t Au} 3 , 000 − 8 , 000 g/t Au is screened, washed with dilute hydrochloric acid ( HCl \text{HCl} HCl ) to remove calcium carbonate scale, and transferred to an elution column for desorption:

Zadra Elution Process : Hot solution containing 1 % NaOH 1\% \text{ NaOH} 1% NaOH and 0.1 − 0.2 % NaCN 0.1 - 0.2\% \text{ NaCN} 0.1 − 0.2% NaCN is passed through the carbon bed at 95 ∘ C − 100 ∘ C 95^\circ\text{C} - 100^\circ\text{C} 9 5 ∘ C − 10 0 ∘ C (atmospheric Zadra) or 130 ∘ C − 140 ∘ C 130^\circ\text{C} - 140^\circ\text{C} 13 0 ∘ C − 14 0 ∘ C (pressurized Zadra, 300 − 400 kPa 300 - 400 \text{ kPa} 300 − 400 kPa ). Cycle time ranges from 8 − 16 hours 8 - 16 \text{ hours} 8 − 16 hours .

Anglo American Research Laboratory (AARL) Process : Carbon is pre-soaked with a strong caustic/cyanide solution ( 3 % NaOH + 3 % NaCN 3\% \text{ NaOH} + 3\% \text{ NaCN} 3% NaOH + 3% NaCN ) at 90 ∘ C 90^\circ\text{C} 9 0 ∘ C for 2 hours, then eluted with high-purity deionized water at 110 ∘ C 110^\circ\text{C} 11 0 ∘ C . AARL offers rapid elution ( 4 − 6 hours 4 - 6 \text{ hours} 4 − 6 hours ).

Stripped carbon is thermally regenerated in a rotary kiln at 650 ∘ C − 750 ∘ C 650^\circ\text{C} - 750^\circ\text{C} 65 0 ∘ C − 75 0 ∘ C in a steam atmosphere to reactivate fouled pores before returning to the adsorption circuit.

Merrill-Crowe Zinc Dust Precipitation Process

The Merrill-Crowe process is a cementation technology used to recover gold and silver from clear pregnant solutions. It is preferred over carbon processes when treating high-silver ores (silver-rich feed, subject to comparative testwork and economics) or high-grade solutions where carbon loading capacity would require impractically large carbon inventories.

The core Merrill-Crowe sequence commonly includes the following controlled operations:

Clarification : Filters remove suspended solids to a circuit-specific target so solids do not consume zinc, coat particles, or blind the precipitate filter.

Vacuum Deaeration : A Crowe tower lowers dissolved oxygen to the validated cementation target because oxygen can re-oxidize precipitated metal and passivate zinc surfaces.

Zinc Dust Addition & Cementation : Fine zinc dust ( Zn 0 \text{Zn}^0 Zn 0 ) and lead nitrate solution ( Pb(NO 3 ) 2 \text{Pb(NO}_3)_2 Pb(NO 3 ​ ) 2 ​ ) are injected into the deaerated solution. Zinc displaces precious metals via a reduction reaction: 2 Na[Au(CN) 2 ] + Zn → 2 Au ↓ + Na 2 [ Zn(CN) 4 ] 2\text{Na[Au(CN)}_2] + \text{Zn} \rightarrow 2\text{Au} \downarrow + \text{Na}_2[\text{Zn(CN)}_4] 2 Na[Au(CN) 2 ​ ] + Zn → 2 Au ↓ + Na 2 ​ [ Zn(CN) 4 ​ ]

Lead nitrate forms a catalytic lead-zinc galvanic couple on zinc particle surfaces, accelerating gold precipitation kinetics. The resulting gold-silver-zinc precipitate is filtered using plate-and-frame filter presses.

Electrowinning, Calcination & Doré Bullion Smelting

Pregnant eluate from carbon stripping (or dissolved precipitate) passes into electrowinning cells containing stainless steel mesh anodes and cathode baskets filled with knitted steel wool. An electric current ( 2 − 4 volts 2 - 4 \text{ volts} 2 − 4 volts ) deposits metallic gold and silver onto the steel wool cathodes: Cathode: Au(CN) 2 − + e − → Au 0 + 2 CN − \text{Cathode: } \text{Au(CN)}_2^- + e^- \rightarrow \text{Au}^0 + 2\text{CN}^- Cathode: Au(CN) 2 − ​ + e − → Au 0 + 2 CN − Anode: 4 OH − → O 2 + 2 H 2 O + 4 e − \text{Anode: } 4\text{OH}^- \rightarrow \text{O}_2 + 2\text{H}_2\text{O} + 4e^- Anode: 4 OH − → O 2 ​ + 2 H 2 ​ O + 4 e −

After isolation from the cyanide circuit, controlled washing, and verification under the site procedure that acid-reactive cyanide hazard has been removed, gold-laden steel wool or filter cake may be digested with dilute sulfuric acid in engineered, ventilated equipment to dissolve base metals or excess zinc. The residue is then washed and calcined in a furnace at 600 ∘ C − 700 ∘ C 600^\circ\text{C} - 700^\circ\text{C} 60 0 ∘ C − 70 0 ∘ C to oxidize residual base metals.

The calcined sludge is mixed with fluxing agents— borax ( Na 2 B 4 O 7 \text{Na}_2\text{B}_4\text{O}_7 Na 2 ​ B 4 ​ O 7 ​ ), silica ( SiO 2 \text{SiO}_2 SiO 2 ​ ), nitre ( KNO 3 \text{KNO}_3 KNO 3 ​ ), and soda ash ( Na 2 CO 3 \text{Na}_2\text{CO}_3 Na 2 ​ CO 3 ​ )—and smelted in a tilting induction furnace at 1 , 100 ∘ C − 1 , 200 ∘ C 1,100^\circ\text{C} - 1,200^\circ\text{C} 1 , 10 0 ∘ C − 1 , 20 0 ∘ C . Impurities form a glassy liquid slag, while molten precious metals settle at the bottom. The liquid metal is poured into molds to cool, yielding unrefined gold-silver doré bullion bars (whose precious-metal content depends on feed and circuit performance) ready for final refinery purification.

Circuit Selection, Control and Reconciliation

A gold-recovery route must be selected from representative mineralogy and variability tests. Compare free-milling response, preg-robbing index, sulfide encapsulation, cyanide-soluble copper, clay behavior, oxygen demand, carbon activity, silver content, solution clarification, residue detoxification, water balance, and product security. CIL can reduce dissolved-gold exposure to preg-robbing material, but severe preg-robbing may require blinding, flotation, roasting, pressure oxidation, resin, or another tested route. Merrill-Crowe can be attractive for silver-rich clear solutions, while carbon adsorption can be simpler for other feeds; neither route wins from head grade or a silver-to-gold ratio alone.

Control the circuit through a metal balance. Reconcile dry feed tonnes and head grade with solution inventory, carbon inventory, precipitate or cathode production, residue grade, spills, cleanup material, and gold-room work in process. A high solution assay is not automatically good performance: it may indicate slow adsorption or cementation. Track extraction, solution loss, carbon loading and advance, elution efficiency, carbon attrition, electrowinning efficiency, barren-solution tenor, residue grade, and unaccounted metal. Use simultaneous, representative samples and consistent dry-mass and volume bases.

Cyanide service demands engineered containment and disciplined work. Maintain compatible materials, secondary containment, ventilation, gas monitoring where the risk assessment requires it, controlled reagent mixing, interlocks, eyewash and showers, emergency response, access control, and trained operators. Never acidify cyanide-bearing solution outside an engineered destruction or analytical procedure: lower pH shifts cyanide toward volatile HCN. Verify instrumentation independently and define actions for low pH, low oxygen, screen failure, carbon loss, high barren tenor, filter breakthrough, vacuum loss, power failure, spill, and abnormal gas indication.

For an exam scenario, first identify where the metal is, then identify the limiting mechanism. If residue grade rises while dissolved gold remains low, investigate leach chemistry, liberation, residence time, oxygen, passivation, and sampling. If dissolved gold rises but residue extraction remains normal, investigate adsorption or precipitation capacity. If calculated recovery exceeds 100%, stop and reconcile moisture, flow, assays, inventory, timing, and sampling before changing reagents.