Study guide

10.1 Metallurgical Plant Flowsheets & Pulp Mass Balances

PRC Mining Engineer Licensure Examination Philippines

Track your progress as you read

Finished sections get a check mark.

1 Chapter 1: Surface Mining Methods & Pit Optimization

1.1 Surface Mining Unit Operations & Method Selection 1.2 Bench Geometry, Slope Stability & Geotechnical Pit Design 1.3 Cut-Off Grade Optimization & Lerchs-Grossmann Pit Limits

2 Chapter 2: Underground Mining Methods & Strata Control

2.1 Underground Mining Method Classification & Selection 2.2 Rock Mechanics, Stress Analysis & Strata Control 2.3 Underground Ground Support Systems & Excavation Design

3 Chapter 3: Materials Handling, Equipment & Mine Economics

3.1 Drilling, Blasting & Explosives Engineering 3.2 Mine Loading, Haulage & Materials Handling Systems 3.3 Mine Capital (CAPEX), Operating Costs (OPEX) & Financial Evaluation

4 Chapter 4: Mine Safety, Ventilation & Philippine Mining Laws

4.1 Mine Ventilation Network Analysis & Environmental Quality 4.2 Philippine Mine Safety Rules, Health & Disaster Prevention 4.3 Philippine Mining Act of 1995 (RA 7942), DAO 2010-21 & Mining Ethics

5 Chapter 5: Physical Geology, Mineralogy & Philippine Deposit Types

5.1 Structural Geology, Tectonics & Ore Controls 5.2 Igneous, Metamorphic & Sedimentary Ore Mineralogy 5.3 Major Philippine Ore Deposit Models

6 Chapter 6: Mineral Exploration, Geophysics & Core Logging

6.1 Geochemical & Remote Sensing Exploration Techniques 6.2 Geophysical Exploration Methods in Mining Geology 6.3 Diamond Drilling, Core Logging & QA/QC Protocols

7 Chapter 7: Geostatistics, Resource Estimation & PMRC Code

7.1 Ore Body Block Modeling & Spatial Variography 7.2 Inverse Distance & Ordinary Kriging Grade Estimation 7.3 Philippine Mineral Reporting Code (PMRC 2020) & Resource Classification

8 Chapter 8: Comminution, Sizing & Physical Mineral Separation

8.1 Crushing, Grinding & Bond Work Index Calculations 8.2 Particle Screening, Hydrocyclone Classification & Sizing 8.3 Gravity Concentration & Magnetic/Electrostatic Separation

9 Chapter 9: Froth Flotation & Extractive Hydrometallurgy

9.1 Froth Flotation Chemistry, Reagents & Cell Kinetics 9.2 Leaching Technologies (Heap, Agitation & Tank) 9.3 Precious Metal Recovery: CIP, CIL, Merrill-Crowe & Electrowinning

10 Chapter 10: Process Plant Flowsheets & Environmental Tailings Management

10.1 Metallurgical Plant Flowsheets & Pulp Mass Balances 10.2 Tailings Storage Facility (TSF) Design & Dam Safety 10.3 Acid Mine Drainage (AMD) Mitigation & Environmental Protection (EPEP/FMR/DP)

11 Chapter 11: 2025 PRC Blueprint, Prospecting Tools & Exploration Decisions

11.1 Official 2025 TOS, Three-Paper Structure & Exam Strategy 11.2 Prospecting Instruments, Base Maps & Surface Geological Mapping 11.3 Integrating Direct and Indirect Evidence for Exploration Decisions

12 Chapter 12: Mine Infrastructure, Sustainable Development & Climate

12.1 Power, Water, Drainage & Support-Facility Selection 12.2 Sustainable Development, Progressive Rehabilitation & Community Impact 12.3 Mining, Climate, Reforestation, Coal & Energy-Transition Minerals

13 Chapter 13: Mine Valuation, Financial Analysis & Due Diligence

13.1 Time Value of Money, Future Value & Present Value 13.2 Financial Statements, Mine Economics & External Price Drivers 13.3 Exploration Provenance, Technical Review & Legal Due Diligence

14 Chapter 14: Mine Organization, Communication & Accountable Leadership

14.1 Line and Staff Functions in a Mining Organization 14.2 Communication With Superiors, Peers & Subordinates 14.3 Authority, Responsibility, Delegation & Safety Accountability

15 Chapter 15: Philippine Mining Law, Indigenous Rights & Professional Ethics

15.1 Legal Hierarchy, Mineral Tenure & Compliance Analysis 15.2 Constitutional Participation, IPRA, FPIC & Ancestral Domains 15.3 RA 4274, Professional Scope, Ethics & Document Integrity

16 Chapter 16: Applied Mathematics & Mine Surveying

16.1 Engineering Mathematics for Safe, Efficient Mine Decisions 16.2 Survey Control, Instruments, Traverses & Error Adjustment 16.3 Topographic Maps, Underground Set-Out & Survey Timeliness

17 Chapter 17: Feasibility Studies, Data Quality & Project Decisions

17.1 Scoping, Pre-Feasibility & Final Feasibility Study Maturity 17.2 Data Accuracy, Assumption Control & Go/No-Go Decisions 17.3 Multidisciplinary Integration, Interfaces & Independent Review

18 Chapter 18: Mining Computer Applications, Digital Control & Global Developments

18.1 Computer Functions, Office Applications & Data Governance 18.2 Geological Modeling, Mine Planning, Scheduling & Valuation Software 18.3 Real-Time Control, Critical Minerals & Regional Mining Developments

19 Chapter 19: Earth Systems, Geologic Time & Philippine Hazards

19.1 Solar-System Origin, Earth Interior & Atmospheric Layers 19.2 Rock Cycle, Landforms & the Geologic Time Scale 19.3 Philippine Tectonics, Geologic Hazards & Mitigation

20 Chapter 20: Metallurgy, Foundry Practice & Assaying

20.1 Extractive, Physical & Adaptive Metallurgy Principles 20.2 Foundry Materials, Casting, Solidification & Defects 20.3 Sampling, Fire Assay, Cupellation, Parting & Assay Calculations

21 Chapter 21: Solid–Liquid Separation, Environmental Law & Mine Ecology

21.1 Thickening, Filtration & Solid–Liquid Separation 21.2 Philippine Air, Water, Waste & Hazardous-Substance Controls 21.3 Mine Ecology, Closure, Tailings, Waste & Community Livelihood

10.1 Metallurgical Plant Flowsheets & Pulp Mass Balances

Key Takeaways Explain This Topic AI

Process Flow Diagrams (PFDs) and Block Flow Diagrams (BFDs) provide standardized schematics establishing equipment connections, pulp densities, stream flowrates, and mass balance accounting.

For a steady two-product split with representative assays of one conserved component, mass balance gives recovery R = [c(f-t)] / [f(c-t)] × 100% and concentration ratio K = (c-t) / (f-t); real circuits require flow, inventory, moisture, and reconciliation checks.

Pulp specific gravity Sp = 100 / [(%S / Ss) + ((100 - %S) / Sw)] relates percent solids by weight (%S) to mineral and fluid specific gravities, forming the basis for slurry pump and tank volume sizing.

Heterogeneous slurry pipelines require a transport velocity and operating envelope that avoid unacceptable deposition, wear, pressure loss, and instability; pump cavitation is separately controlled through suction conditions and NPSH margin.

Thickener overflow can recover process water, but recovery is determined by feed and underflow solids, overflow quality, inventory, evaporation, entrainment, and circuit demand—not a universal percentage.

Last updated: August 2026

10.1 Metallurgical Plant Flowsheets & Pulp Mass Balances

Extractive metallurgy and mineral processing rely on flowsheets and mass balance calculations to design, monitor, and optimize plant performance. Metallurgical plant flowsheets delineate unit operations—such as comminution, classification, flotation, leaching, and dewatering—providing the engineering framework for material, water, and metal routing.

Metallurgical Plant Flowsheets: Block Diagrams & PFDs

Flowsheets are categorized based on their level of technical detail:

Block Flow Diagrams (BFDs) : Conceptual schematics showing major processing circuits (e.g., Primary Crushing, Grinding, Flotation, Thickening) as simple blocks connected by directional material flow lines. BFDs establish overall plant architecture during preliminary scoping studies.

Process Flow Diagrams (PFDs) : Detailed engineering drawings depicting major equipment items (e.g., SAG mills, jaw crushers, hydrocyclones, flotation banks, high-rate thickeners), stream identification tags, operating temperatures, pressures, volumetric flow rates, and pulp densities under nominal design conditions.

Flowsheet symbols conform to standardized conventions (such as ISO or ANSI standards) to ensure consistent communication across engineering disciplines.

Two-Product Metallurgical Mass Balances

A steady-state two-product separation circuit splits a single feed stream ( F F F ) into a concentrate stream ( C C C ) and a tailings stream ( T T T ). Mass conservation applies to both total wet/dry material mass and individual metal contents.

Fundamental Mass Conservation Equations

Total Mass Conservation : F = C + T F = C + T F = C + T

Metal (Assay) Conservation : F f = C c + T t F f = C c + T t F f = C c + Tt

Where:

  • F F F = Mass flow rate of dry feed (tonnes/hour or kg/s)
  • C C C = Mass flow rate of dry concentrate (tonnes/hour or kg/s)
  • T T T = Mass flow rate of dry tailings (tonnes/hour or kg/s)
  • f f f = Grade or assay of valuable element in feed (decimal fraction or %)
  • c c c = Grade or assay of valuable element in concentrate (decimal fraction or %)
  • t t t = Grade or assay of valuable element in tailings (decimal fraction or %)
  • Derivation of Mass Flow Ratios

Substituting T = F − C T = F - C T = F − C into the metal balance equation yields: F f = C c + ( F − C ) t = C c + F t − C t F f = C c + (F - C) t = C c + F t - C t F f = C c + ( F − C ) t = C c + Ft − Ct F ( f − t ) = C ( c − t ) F (f - t) = C (c - t) F ( f − t ) = C ( c − t )

Rearranging gives the weight yield ratio of concentrate to feed: C F = f − t c − t \frac{C}{F} = \frac{f - t}{c - t} F C ​ = c − t f − t ​

Similarly, substituting C = F − T C = F - T C = F − T yields the tailings weight yield ratio: T F = c − f c − t \frac{T}{F} = \frac{c - f}{c - t} F T ​ = c − t c − f ​

Ratio of Concentration ( K K K ) and Enrichment Ratio ( E E E )

Ratio of Concentration ( K K K ) : The mass of feed required to produce one unit mass of concentrate: K = F C = c − t f − t K = \frac{F}{C} = \frac{c - t}{f - t} K = C F ​ = f − t c − t ​

Enrichment Ratio ( E E E ) : The factor by which the feed grade is upgraded in the concentrate: E = c f E = \frac{c}{f} E = f c ​

Metallurgical Recovery ( R R R )

Metallurgical recovery ( R R R ) represents the percentage of total valuable metal in the feed that is successfully recovered into the concentrate: R = ( C c F f ) × 100 % R = \left( \frac{C c}{F f} \right) \times 100\% R = ( F f C c ​ ) × 100%

Substituting the mass ratio C F = f − t c − t \frac{C}{F} = \frac{f - t}{c - t} F C ​ = c − t f − t ​ into the recovery equation gives the Two-Product Recovery Formula : R = c ( f − t ) f ( c − t ) × 100 % R = \frac{c (f - t)}{f (c - t)} \times 100\% R = f ( c − t ) c ( f − t ) ​ × 100%

This formula allows calculation of metallurgical recovery directly from chemical assays ( f f f , c c c , t t t ) without requiring direct mass flow measurements.

Pulp Density & Slurry Calculations

In hydrometallurgical and mineral processing plants, solids are transported as aqueous suspensions (slurries or pulps). Accurately determining pulp density, specific gravity, and percent solids is vital for volumetric equipment sizing and mass balance accounting.

Key Pulp Parameters & Formulas

Percent Solids by Weight ( % S \%S % S ) : % S = ( W s W p ) × 100 % = ( W s W s + W w ) × 100 % \%S = \left( \frac{W_s}{W_p} \right) \times 100\% = \left( \frac{W_s}{W_s + W_w} \right) \times 100\% % S = ( W p ​ W s ​ ​ ) × 100% = ( W s ​ + W w ​ W s ​ ​ ) × 100%

Where W s W_s W s ​ is dry solid weight, W p W_p W p ​ is total pulp weight, and W w W_w W w ​ is water weight.

Pulp Specific Gravity ( S p S_p S p ​ ) : S p = 100 % S S s + 100 − % S S w S_p = \frac{100}{\frac{\%S}{S_s} + \frac{100 - \%S}{S_w}} S p ​ = S s ​ % S ​ + S w ​ 100 − % S ​ 100 ​

Where S s S_s S s ​ is solid specific gravity (e.g., 2.70 2.70 2.70 for quartz/chalcopyrite mix) and S w S_w S w ​ is liquid specific gravity ( 1.00 1.00 1.00 for water).

Percent Solids by Volume ( % V \%V % V ) : % V = % S × ( S p S s ) \%V = \%S \times \left( \frac{S_p}{S_s} \right) % V = % S × ( S s ​ S p ​ ​ )

Volumetric Flow Rate of Pulp ( Q p Q_p Q p ​ ) : Q p = M s % S / 100 × S p × ρ w Q_p = \frac{M_s}{\%S / 100 \times S_p \times \rho_w} Q p ​ = % S /100 × S p ​ × ρ w ​ M s ​ ​

Where M s M_s M s ​ is dry solid throughput rate (t/h) and ρ w \rho_w ρ w ​ is water density ( 1.0 t/m 3 1.0\text{ t/m}^3 1.0 t/m 3 ).

Slurry Pumping Hydraulics & Pipeline Design

Pulp slurry transport requires specialized centrifugal slurry pumps and lined pipelines. Key design parameters include:

Critical Velocity ( V c V_c V c ​ ) : The minimum line velocity required to prevent solid particles from settling out of suspension and forming a stagnant bed (Durand formula): V c = F L 2 g D ( S s − 1 ) V_c = F_L \sqrt{2 g D (S_s - 1)} V c ​ = F L ​ 2 g D ( S s ​ − 1 ) ​ Where F L F_L F L ​ is a particle size coefficient, g g g is gravitational acceleration ( 9.81 m/s 2 9.81\text{ m/s}^2 9.81 m/s 2 ), D D D is pipe internal diameter (m), and S s S_s S s ​ is solid specific gravity.

Total Dynamic Head (TDH) : Sum of static head, friction head losses in pipes/fittings, and pressure head. Friction losses increase with slurry viscosity and particle concentration.

Pump Head and Efficiency Derating : Heavy slurries decrease centrifugal pump performance. Correction factors ( C h C_h C h ​ for head, C e C_e C e ​ for efficiency) are applied to clear water performance curves: H m = H w × C h H_m = H_w \times C_h H m ​ = H w ​ × C h ​ .

Equipment Sizing & Plant Water Balance Circuits

Balancing water and solids across closed-loop grinding and flotation circuits ensures steady-state operation.

Grinding Circuit Hydrocyclone Water Balance

Hydrocyclones separate coarse mill discharge (underflow, recycled to SAG/ball mill) from fine particles (overflow, routed to flotation). Mill Feed + Recycled Water -> Ball Mill -> Sump + Dilution Water -> Hydrocyclone Bank

  • hydrocyclone underflow (65-75% solids) -> Recycled to Mill
  • hydrocyclone overflow (30-40% solids) -> Sent to Flotation

Thickeners consolidate tailings or concentrates and return overflow water when quality and inventory permit. The recovered fraction follows the mass balance, underflow density, evaporation, entrainment, leakage, and downstream demand rather than a universal percentage.

Summary Table of Flowsheet Formulas

Parameter Symbol / Formula Mathematical Expression Primary Engineering Purpose

Mass Yield Y c Y_c Y c ​ f − t c − t \frac{f - t}{c - t} c − t f − t ​ Fraction of feed mass reporting to concentrate

Ratio of Concentration K K K c − t f − t \frac{c - t}{f - t} f − t c − t ​ Tonnes of feed needed per tonne of concentrate

Metallurgical Recovery R R R c ( f − t ) f ( c − t ) × 100 % \frac{c(f - t)}{f(c - t)} \times 100\% f ( c − t ) c ( f − t ) ​ × 100% Percentage of valuable metal recovered

Pulp Specific Gravity S p S_p S p ​ 100 % S S s + 100 − % S S w \frac{100}{\frac{\%S}{S_s} + \frac{100 - \%S}{S_w}} S s ​ % S ​ + S w ​ 100 − % S ​ 100 ​ Slurry density determination for tank/pump sizing

Percent Solids by Vol % V \%V % V % S × S p S s \%S \times \frac{S_p}{S_s} % S × S s ​ S p ​ ​ Volumetric fraction of solids in slurry

Critical Settlement Vel V c V_c V c ​ F L 2 g D ( S s − 1 ) F_L \sqrt{2 g D (S_s - 1)} F L ​ 2 g D ( S s ​ − 1 ) ​ Minimum pipeline flow speed to prevent deposition