Study guide

11.1 Official 2025 TOS, Three-Paper Structure & Exam Strategy

PRC Mining Engineer Licensure Examination Philippines

Track your progress as you read

Finished sections get a check mark.

1 Chapter 1: Surface Mining Methods & Pit Optimization

1.1 Surface Mining Unit Operations & Method Selection 1.2 Bench Geometry, Slope Stability & Geotechnical Pit Design 1.3 Cut-Off Grade Optimization & Lerchs-Grossmann Pit Limits

2 Chapter 2: Underground Mining Methods & Strata Control

2.1 Underground Mining Method Classification & Selection 2.2 Rock Mechanics, Stress Analysis & Strata Control 2.3 Underground Ground Support Systems & Excavation Design

3 Chapter 3: Materials Handling, Equipment & Mine Economics

3.1 Drilling, Blasting & Explosives Engineering 3.2 Mine Loading, Haulage & Materials Handling Systems 3.3 Mine Capital (CAPEX), Operating Costs (OPEX) & Financial Evaluation

4 Chapter 4: Mine Safety, Ventilation & Philippine Mining Laws

4.1 Mine Ventilation Network Analysis & Environmental Quality 4.2 Philippine Mine Safety Rules, Health & Disaster Prevention 4.3 Philippine Mining Act of 1995 (RA 7942), DAO 2010-21 & Mining Ethics

5 Chapter 5: Physical Geology, Mineralogy & Philippine Deposit Types

5.1 Structural Geology, Tectonics & Ore Controls 5.2 Igneous, Metamorphic & Sedimentary Ore Mineralogy 5.3 Major Philippine Ore Deposit Models

6 Chapter 6: Mineral Exploration, Geophysics & Core Logging

6.1 Geochemical & Remote Sensing Exploration Techniques 6.2 Geophysical Exploration Methods in Mining Geology 6.3 Diamond Drilling, Core Logging & QA/QC Protocols

7 Chapter 7: Geostatistics, Resource Estimation & PMRC Code

7.1 Ore Body Block Modeling & Spatial Variography 7.2 Inverse Distance & Ordinary Kriging Grade Estimation 7.3 Philippine Mineral Reporting Code (PMRC 2020) & Resource Classification

8 Chapter 8: Comminution, Sizing & Physical Mineral Separation

8.1 Crushing, Grinding & Bond Work Index Calculations 8.2 Particle Screening, Hydrocyclone Classification & Sizing 8.3 Gravity Concentration & Magnetic/Electrostatic Separation

9 Chapter 9: Froth Flotation & Extractive Hydrometallurgy

9.1 Froth Flotation Chemistry, Reagents & Cell Kinetics 9.2 Leaching Technologies (Heap, Agitation & Tank) 9.3 Precious Metal Recovery: CIP, CIL, Merrill-Crowe & Electrowinning

10 Chapter 10: Process Plant Flowsheets & Environmental Tailings Management

10.1 Metallurgical Plant Flowsheets & Pulp Mass Balances 10.2 Tailings Storage Facility (TSF) Design & Dam Safety 10.3 Acid Mine Drainage (AMD) Mitigation & Environmental Protection (EPEP/FMR/DP)

11 Chapter 11: 2025 PRC Blueprint, Prospecting Tools & Exploration Decisions

11.1 Official 2025 TOS, Three-Paper Structure & Exam Strategy 11.2 Prospecting Instruments, Base Maps & Surface Geological Mapping 11.3 Integrating Direct and Indirect Evidence for Exploration Decisions

12 Chapter 12: Mine Infrastructure, Sustainable Development & Climate

12.1 Power, Water, Drainage & Support-Facility Selection 12.2 Sustainable Development, Progressive Rehabilitation & Community Impact 12.3 Mining, Climate, Reforestation, Coal & Energy-Transition Minerals

13 Chapter 13: Mine Valuation, Financial Analysis & Due Diligence

13.1 Time Value of Money, Future Value & Present Value 13.2 Financial Statements, Mine Economics & External Price Drivers 13.3 Exploration Provenance, Technical Review & Legal Due Diligence

14 Chapter 14: Mine Organization, Communication & Accountable Leadership

14.1 Line and Staff Functions in a Mining Organization 14.2 Communication With Superiors, Peers & Subordinates 14.3 Authority, Responsibility, Delegation & Safety Accountability

15 Chapter 15: Philippine Mining Law, Indigenous Rights & Professional Ethics

15.1 Legal Hierarchy, Mineral Tenure & Compliance Analysis 15.2 Constitutional Participation, IPRA, FPIC & Ancestral Domains 15.3 RA 4274, Professional Scope, Ethics & Document Integrity

16 Chapter 16: Applied Mathematics & Mine Surveying

16.1 Engineering Mathematics for Safe, Efficient Mine Decisions 16.2 Survey Control, Instruments, Traverses & Error Adjustment 16.3 Topographic Maps, Underground Set-Out & Survey Timeliness

17 Chapter 17: Feasibility Studies, Data Quality & Project Decisions

17.1 Scoping, Pre-Feasibility & Final Feasibility Study Maturity 17.2 Data Accuracy, Assumption Control & Go/No-Go Decisions 17.3 Multidisciplinary Integration, Interfaces & Independent Review

18 Chapter 18: Mining Computer Applications, Digital Control & Global Developments

18.1 Computer Functions, Office Applications & Data Governance 18.2 Geological Modeling, Mine Planning, Scheduling & Valuation Software 18.3 Real-Time Control, Critical Minerals & Regional Mining Developments

19 Chapter 19: Earth Systems, Geologic Time & Philippine Hazards

19.1 Solar-System Origin, Earth Interior & Atmospheric Layers 19.2 Rock Cycle, Landforms & the Geologic Time Scale 19.3 Philippine Tectonics, Geologic Hazards & Mitigation

20 Chapter 20: Metallurgy, Foundry Practice & Assaying

20.1 Extractive, Physical & Adaptive Metallurgy Principles 20.2 Foundry Materials, Casting, Solidification & Defects 20.3 Sampling, Fire Assay, Cupellation, Parting & Assay Calculations

21 Chapter 21: Solid–Liquid Separation, Environmental Law & Mine Ecology

21.1 Thickening, Filtration & Solid–Liquid Separation 21.2 Philippine Air, Water, Waste & Hazardous-Substance Controls 21.3 Mine Ecology, Closure, Tailings, Waste & Community Livelihood

11.1 Official 2025 TOS, Three-Paper Structure & Exam Strategy

Key Takeaways Explain This Topic AI

PRC Board of Mining Engineering Resolution No. 02 (s. 2025) adopted the enhanced Tables of Specifications for the October 2025 examination and later schedules.

The examination has three 100-item subject papers weighted 35%, 35%, and 30%, for 300 scored items across three examination days.

Each subject paper is scheduled from 8:00 a.m. to 4:00 p.m. in the official October 2025 program, so pacing, food, hydration, and calculator discipline matter.

The TOS emphasizes application and analysis: 69% of Mining Engineering I items, 67% of Mining Engineering II items, and 70% of Mining Engineering III items are Apply-or-higher.

A study plan should allocate time by official paper weight while rotating calculations, interpretation, and professional judgment rather than relying on recall alone.

Last updated: August 2026

The controlling blueprint for current candidates is Professional Regulatory Board of Mining Engineering Resolution No. 02, series of 2025 , together with its Annex A enhanced Tables of Specifications (TOS). The resolution states that the enhanced TOS applies beginning with the October 2025 Mining Engineers Licensure Examination and subsequent schedules. That effective-date rule matters: an older syllabus remains useful for background, but it cannot override the newer competency and item allocations.

Official Examination Architecture

The official October 2025 PRC examination program schedules one paper per day:

Paper Official weight Items in 2025 TOS Scheduled session Principal areas

Mining Engineering I 35% 100 8:00 a.m.–4:00 p.m. Prospecting and evaluation; planning, design and development; mining methods; safety, health and ventilation; rock mechanics; environmental protection

Mining Engineering II 35% 100 8:00 a.m.–4:00 p.m. Valuation; management; ethics and mining laws; mathematics and surveying; feasibility studies; computer applications; general information

Mining Engineering III 30% 100 8:00 a.m.–4:00 p.m. General geology; mineralogy and petrology; economic and structural geology; metallurgy; mineral processing; assaying; ecology

PRC's published 2026 schedule lists the Mining Engineers computer-based licensure examination for October 20–22, 2026 . Candidates must still check the final examination program and their Notice of Admission for venue, call time, permitted items, and any later change.

The complete examination therefore contains 300 items , not 100. The 35/35/30 figures are weights of the three papers in the overall result. They are not weights for the three broad categories previously used in local practice metadata. Always distinguish the official examination item count from the number of practice questions available on this website.

What the Cognitive Distribution Means

Annex A allocates items across Bloom's taxonomy. Mining Engineering I has 31 Understanding, 51 Applying, 13 Analyzing, and 5 Evaluating items. Mining Engineering II has 1 Remembering, 29 Understanding, 52 Applying, 15 Analyzing, and 3 Evaluating items. Mining Engineering III has 6 Remembering, 24 Understanding, 50 Applying, 15 Analyzing, and 5 Evaluating items.

That pattern changes how candidates should review. Memorizing a definition of net present value is insufficient; a candidate must build and interpret a discounted cash-flow line. Knowing that a total station measures angles and distance is insufficient; a candidate must select control, reduce observations, identify closure error, and judge whether the survey is adequate. Knowing the name of a tailings hazard is insufficient; a candidate must connect pore pressure, drainage, failure mode, consequence, and monitoring response.

Weight-Based Study Allocation

A 300-hour program illustrates proportional allocation:

Mining Engineering I: 300 × 0.35 = 105 300 \times 0.35 = 105 300 × 0.35 = 105 hours.

Mining Engineering II: 300 × 0.35 = 105 300 \times 0.35 = 105 300 × 0.35 = 105 hours.

Mining Engineering III: 300 × 0.30 = 90 300 \times 0.30 = 90 300 × 0.30 = 90 hours.

Within a paper, use the TOS topic percentages. For example, Mine Safety, Health and Ventilation is 23% of Mining Engineering I, so a 105-hour Paper I plan assigns about 105 × 0.23 = 24.15 105 \times 0.23 = 24.15 105 × 0.23 = 24.15 hours before diagnostic adjustments. The weights are a baseline, not a ban on remediation: if a timed diagnostic exposes weak surveying, add targeted hours while retaining recurring review of high-weight topics.

Eight-Hour Paper Strategy

An eight-hour scheduled session does not mean every minute is available for solving. Instructions, checking, and permitted breaks consume time. Use controlled passes:

First pass: answer direct and familiar items; mark calculations that need a full setup.

Second pass: solve multi-step quantitative and interpretation items with units written beside each value.

Third pass: examine flagged assumptions, signs, dimensions, and selected responses.

Final audit: ensure every item has a response and the answer sheet matches the question number.

At an even pace, 100 items over eight hours is 4.8 scheduled minutes per item, but actual working time will be lower. Practice long mixed sets with one permitted non-programmable calculator. The October 2025 PRC program specifically allows only one calculator inside the examination room and directs candidates to the current PRC list of permitted non-programmable models. Verify the program for the candidate's own administration because venues and instructions can change.

Source Discipline

Use the PRC resolution and Annex A for competency coverage, the current PRC examination program for dates and room-day instructions, and the PRC application portal or profession-specific requirements page for filing requirements. Do not infer a passing score, fee, retake rule, or application document from another engineering board. If PRC has not published a value for this examination, describe it as unpublished rather than substituting a common professional-exam rule.

Use the TOS as a Control Document

Mark every competency against a section, worked problem, and review date. The weight predicts item allocation, while the Bloom columns predict the action expected: explain, calculate, select, diagnose, or evaluate. Recheck the PRC resolution and current examination program before a later sitting because dates, venues, allowed materials, and administrative instructions can change even when the technical TOS remains effective.